Repair And Maintenance Of Lighthouse Staff Quarters, I.Q, Toilet Block And Office Building At Little Andaman Lighthouse, Hutbay
Tender Value
25.49 Lakhs
Estimated cost
Bid Submission
14 Jul 2022
0 days left
EMD
51000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
andaman → Andaman And Nicobar Islands
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair And Maintenance Of Lighthouse Staff Quarters, I.Q, Toilet Block And Office Building At Little Andaman Lighthouse, Hutbay
BOQ
| Sl. No. | Item Description |
| 1 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared |
| 2 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead including all tools & plants, labour etc. complete as per direction of engineer-in-charge. |
| 3 | Demolishing cement concrete 1:3:6 manually/ by mechanical means including disposal of material within 50 metres lead and supply of all tools and plants and all other charges etc complete as per direction of Engineer-in-charge. |
| 4 | Repair works to cracks in plastering / masonary / R.C.C. works/ lintels/ beams/ chajjas etc. cutting out cracks in \"V\" section , cleaning out wetting, grouting with cement-sand slurry, 1:3( 1 Cement, 3 Sand) including mixing with water proofing compound as recommended by the manufacturerincluding supply of all materials, tools, labours, scaffoldings etc. complete as directed by the engineer in charge. |
| 5 | Repairs to plaster of thickness 12 mm to 20 mm in Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) on wall surface after removing old damaged/cracked plaster as directed including cost of all materials, labours, disposal of the patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including cost of all materials, labours, disposal of the debris within a lead of 50mtr scaffolding, curing, tools and plants and all other charges etc. complete. |
| 6 | Earth work in excavation in trenches for foundations and for pipes, drains etc, cables etc. (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5m including getting out and stacking the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m in loose or soft soilincluding all tools & plants, labour etc. complete as per direction of Engineer-in-Charge. |
| 7 | Polishing one coats on previously polished wooden hand railing of tower & wherever necessary to give an even shades directed at all height in tower after filling the voids/ gaps/ cracks with approved filler material & then polishing with french polish of approved Ist quality, brand & manufacture, colour & shade after scrapping down the worn polish, cleaning and preparing the surface properly & then cleaning the polishing spot on the floors, furnitures etc of thetower after polishing, removal and placing of all the items in existing position as directed including cost of supply of allmaterial, labour, tools & plants, scaffolding and all other charges etc., complete. |
| 8 | Cleaning of the existing well of 2.00m dia to know the availability of water, including digging out the sand/or debris up to water level, dismantling and removing the old parapet wall, cleaning the side wall of the well with water including cleaning the mud/slurry etc, pumping out the water for cleaning etc complete as directed including supply of all materials, labours, tools & plants and all other charges etc. complete(Refer Rate Analysis) |
| 9 | Providing & Fixing 1mm thick M.S Sheet door with frame of , 40x40x6mm angle iron 3.00mm M.S Gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S angles 40x40x6mm for diagonal braces. |
| 10 | Single leaf door for main entrance |
| 11 | Double leaf door for service room |
| 12 | Providing & Fixing steel door/windows with frame of standard rolled steel section without horizontal glazing bars joints mitred and welded with GI wire/jalli embedded with concrete with wooden plaugs & screws (or) check nuts including and fixing of projecting hings, handles etc as requred, complete including applying a primer coat of red oxide paint and two coats of S.E paints including supply of all materialls, labours, fabrication, charges of fixing, transportation etc complete . |
| 13 | Providing Steel reinforcement (Thermo-Mechanically Treated bars) of Fe 415 grade for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. |
| 14 | Dismantling of wooden doors, windows and ventilators, clerestory windows (steel or wood) shutter including chowkhats,architrave, holdfasts etc, area not exceeding up to 3Sqm, without damaging the adjacent structure including stacking the serviceable material and disposal of unserviceable materials supply of all labours, tools, materials, etc. complete as directed by the engineer in charge. |
| 15 | Providing Second class teak/padauk wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). |
| 16 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand: 6 graded stone aggregate 20mm nominal size). |
| 17 | Providing and fixing Second class teak/padauk wood panelled 35 mm thick shutters for doors, windows and clerestory windows, finished with melamine polish over a coat of wooden primer including ISI marked M.S. pressed butt hinges (heavy type) : 100x85x5.5 mmbright finishedwith necessary brass screws, Aluminium tower bolt (barrel type) 250x10mm, Aluminium handles 125 mm with plate 175x32 mm, Aluminium sliding bolts 300x16 mm and Aluminium singlerubber door stopper including supply of all labours, tools, materials, etc. complete as directed by the engineer in charge. |
| 18 | Providing and fixing Second class teak/padauk wood 35 mm thick glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges, Al. Tower bolts,Al. Handles,Hooks & Eyes bright finished of required size with necessary screws including all tools & plants, labour etc. complete as per direction of engineer-in-charge.(ref. rate analysis) |
| 19 | Providing and laying in position cement concrete of 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone aggregate 20mm nominal size) above plinth level including laying, compacting, curing and form Works complete with all materials, tools, labours etc. as directed by the engineer in charge |
| 20 | Cleaning of Existing Septic Tank including cleaning the sewer line, inspection chambers, manholes and carried out minor repairs if any, including sealing the tanks with cement mortar, flushing the sewer line and tank with clean water and disposal of the wastes excrete/debris/deposits to the dumping site as specified by the local authority including cost of all materials, tools and plants, labour charges etc. complete as directed by the engineer incharge |
| 21 | Replacement of damaged/unserviceable water supply and sanitary fittings of approved 1st quality, brand and make to the water supply system including cost of all materials,labours, tools and plants and all other charges etc.complete. |
| 22 | 15mm dia Brass Bib-Cock |
| 23 | Providing and fixing Stainless Steel A ISI 304 (18/8) Kitchen sink without drain board of 610x510 mm bowl depth 200 mm as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, waste pipe, 15mm brass bib cock including painting of fittings and brackets, cutting and making good the walls wherever required including supply of all materials, labours, tools etc. complete as directed by the engineer in charge. |
| 24 | Providing and fixing Porcelain washbasin 630x450X200mm with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require and level providing inlet and waste outlet connections including supply of all materials, labours, tools & plants and all other charges etc. complete as directed. |
| 25 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete as directed by the engineer in charge. |
| 26 | Providing and fixing PTMT 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88mm, weighing not less than 190 gms complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour complete as directed by the engineer in charge. |
| 27 | Providing and fixing 0.80 mm thick with zinc coating not less than 275 gm/m² 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes etc complete as directed by the engineer in charge. |
| 28 | Providing and fixing 63mm dia PVC vent pipe with cowl ventilator of height 3m (average) including fixing over manhole, septic tank as directed, including the cost of supply of all labours, materials, tools & plants and all other charges etc. complete |
| 29 | Replacing the damaged/broken door and window fitting with new Aluminium fittings of approved quality with C.P brass screws including the cost of supply of all labours, materials, tools & plants and all other charges etc. complete |
| 30 | Stainless steel butt hinges 100mm |
| 31 | Aluminium Tower Bolt 250mm |
| 32 | Aluminium Tower Bolt 150mm |
| 33 | Aluminium Aldrop 300mm |
| 34 | Aluminium Hook and Eye 150mm |
| 35 | Petty repairs to wooden doors, windows, ventilators and cupboards for easy opening and closing including repalcing damaged styles, rials, beading etc. including supply of all materials, labours, tools etc. complete as directed |
| 36 | Polishing the wooden furniture with french polish in two coats including putty repairs to the furniture, cleaning and preparing the surface properly etc. including the cost of supply of all labours, materials, tools & plants and all other charges etc. complete. |
| 37 | Wooden Office Table |
| 38 | Wooden Tea Poy |
| 39 | Dining Table |
| 40 | Dining Chair |
| 41 | Wooden Cot |
| 42 | Replacement of broken glass panels of window as directed area not exceeding 0.10 Sqm. Fixing with new 4mm-thick Float glass fitted with teak wood beading disposal of debris etc. including the cost of supply of all labours, materials, tools & plants and all other charges etc. complete. |
| 43 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand andmanufacture |
| 44 | Wall Painting with Acrylic Emulsion Paint of Interior Grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre. of approved brand and manufacture, over and including a coat of water thinnable cement primer of approved brand and manufacture to give an even shade after preparing the surface properly& then cleaning thecement painting spots on the floors,furnitures,doors & windows etc as directed including supply of all materials, labours, tools etc. complete as directed by the engineer in charge. |
| 45 | Finishing walls with 1st quality Premium Acrylic Smooth exterior paint with Silicone additives of required shade (Asian/ Snowcem/ Berger) on new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) at all heights to give an even shade etc. wherever required including supply of all materials, labours, tools, scaffoldings etc. complete as directed by the engineer in charge. |
| 46 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture |
| 47 | Painting of Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture |
| 48 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20mm nominal size) over 75mm thick bed of bry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand, including finishing the top smooth in CM 1:4 including supply of all labours, tools, materials, etc. complete as directed by the engineer in charge. |
| 49 | Providing & laying 110mm dia PVC pipes of heavy type 6 Kgf/Sq.cm of approved brand and manufactures for rain water/SWR pipe line including fixing necessary clamps, screws and fittings, included jointing of pipes & fittings with PVC solvent etc. including walling, making good the wall, ceiling and floor including cost of all materials, Tools & Plants, labour charges etc. complete as directed by the engineer in charge. |
| 50 | Providing & laying 75mm dia PVC pipes of heavy type 6 Kgf/Sq.cm of approved brand and manufactures for rain water/SWR pipe line including fixing necessary clamps, screws and fittings, included jointing of pipes & fittings with PVC solvent etc. including walling, making good the wall, ceiling and floor including cost of all materials, Tools & Plants, labour charges etc. complete as directed by the engineer in charge. |
| 51 | Providing and laying Ceramic glazed Anti Skid floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment, cost of supply of all labours, materials, tools & plants and all other charges etc, complete. |
| 52 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer) or approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1 Cement:3 Coarse Sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete with all materials, tools, labours, etc as directed by the engineer in charge. |
| 53 | Providing and fixing 25 mm nominal outer dia Pipes Chlorinated Polyvinyl Chloride (CPVC) pipes Internal work - Exposed on wall, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. |
| 54 | Constructing block masonry chamber for underground inspection chamber Inside dimensions 455x610 mm and 45 cm deep for single pipe line and bends with blocks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: |
AI Tender Summary
Tender Timeline
Jun 29, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 15, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender