Supply Of Spares For National Type 12-P-160 Triplex Power Slush Pump, Size : 7.1/2 X 12 Complete Fluid End Spares 100 07035086 Liner, 6.1/4, Bimetallic, With Packing, Consisting Of Liner Shell & Liner Sleeve, Centrifugally Cast, Alloy Steel For

Sharing tender

Supply Of SPARES FOR NATIONAL TYPE 12-P-160 TRIPLEX POWER SLUSH PUMP, SIZE : 7.1/2 X 12 COMPLETE FLUID END SPARES 100 07035086 Liner, 6.1/4, Bimetallic, with packing, consisting of liner shell & liner sleeve, centrifugally cast, alloy steel for shell & high chromium alloy for sleeve. Uniform & constant hardness RC61 to RC65 on sleeve & upto RC38 on shell. Sleeve is shrunk fitted, shell & sleeve honed to super high surface finish. Mission Pt.No. S17244-62,(Sketch No. OIL/2053) Part No. K-5323 BPCL (OIL WELL) - SLUSH PUMP SPARES FOR STANDARD SINGLE ACTING TRIPLEX HORIZONTAL PISTON SLUSH PUMP, MODEL A-1100PT, SIZE : 190.5 MM(7.1/2) X 245 MM(10) WITH LINERS MOUNTED ON OILFIELD SKID GROUP : POWER END (DRG.NO. P196-AV1-D) 20 07070098 Extension, Piston Rod Identification No. 981333004 Part No. 10-300-142 Part No. 981333004 Part No. TM 2310 of TRACTOR ENGINEERS LTD. B.P.C.L/OILWELL MODEL A-1400 PT SLUSH PUMPS (MUD) PUMPS) (FOR BHEL E-1400 RIGS (S-5 & S-6)(10 TH & 11 TH RIGS) AND BHEL E-2000 RIGS)B.P.C.L./OILWELL MODEL A-1400 PT TRIPLEX SINGLE ACTING PISTON PUMP, SIZE : 7.1/2 X 10,COMPLETE WIYH LUBRICATING OIL SYSTEM, INCLUDING HEAT EXCHANGER AND ELECTRIC MOTOR. GROUP : POWER END (1-100-009) 10 07074081 Cross-Head Guide,Lower Part No. 10-300-233 of NATIONAL OILWELL VARCO Part No. 931143005 of BHARAT PUMPS AND COMPRESSORS LTD. 30 07074057 Cross-Head Guide - Upper Part No. 10-300-141 of NATIONAL OILWELL VARCO Part No. 931143003 of BHARAT PUMPS AND COMPRESSORS LTD. 40 07074035 Shim Set, Cross-Head Guide Part No. 10-300-082 of NATIONAL OILWELL VARCO Part No. 991139014 of BHARAT PUMPS AND COMPRESSORS LTD. MISSION SUPREME SINGLE ACTING PISTON WITH1.5/8 STRAIGHT BORE-SERIES`LFor National Type 12-P-160 Triplex Slush Pump 200 07141094 Piston Assy.7.1/4 with O-Ring for Mission Slush Pump Part No. S-7.1/4H-L-15 Part No. SE-LPA-L-725 of SUDARSHAN ELASTOMER PVT. LTD. MISSION SUPREME SINGLE ACTING PISTON WITH 1.5/8 STRAIGHT BORE, HUB DIA. 95.250 MM(3.3/4), SERIES L FOR NATIONAL TYPE 12-P-160 TRIPLEX SLUSH PUMP 170 07141208 Rubber, Piston. Size : 7.1/4 Part No. S-7.1/4-L FOR BPCL (OIL WELL) MODEL A-1100 PT & A-850 PT STANDARD SINGLE ACTING HORIZONTAL PISTON SLUSH PUMPS, SIZES : 190.5 MM(7.1/2) X 254 MM(10) & 190.5 MM(7.1/2) X 228.6 MM(9) PISTON - MISSION SUPREME SINGLE ACTING PISTON WITH 177.8 MM(7) DIA. X 38.1 MM(1.1/2), STRAIGHT BORE, 95.250 MM(3.3/4) HUB DIA., SERIES `L 50 07148508 177.8 mm(7) Piston Assembly including Rubber, Retaining ring and End plate National Pt.No. 012-180-618 Part No. S-7H-L-14 of TRACTOR ENGINEERS LTD. Part No. SE-LPA-L-70 of SUDARSHAN ELASTOMER PVT. LTD. Part No. TM 1005 FOR BPCL (OIL WELL) MODELS A-1100 PT/A-850 PT/ A-1700 PT STANDARD SINGLE ACTING TRIPLEX HORIZONTAL PISTON SLUSH PUMPS; SIZES : 190.5 MM(7.1/2) X 254 MM(10) & 190.5 MM (7.1/2) X 228.6 MM(9)& 190.5 MM(7.1/2) X 304.8 MM(12) PISTON ROD - MISSION SUPREME 240 07148827 TM 2331 - Piston Rod Assy. Consisting of : TM 2330 - Extension Rod - 1 No. TM 2045 - Nut Retaining - 1 No. TM 2328 - Piston Rod Sub Assy.Consisting of: TM 2329 - Piston Rod - 1 No. TM 1040 - Piston Rod Stud - 1 No. K 2331 - Piston Rod Assy. Consisting of, K2330- Extension Rod K2045 Nut Retaining K2328 Piston Rod sub assy consisting of K2329 Piston Rod K1040 piston Rod Stud of Khalsa Oilfield Equipments Pvt. Ltd. Part No. 21041-A (TM2307) of TRACTOR ENGINEERS LTD. Part No. TM 2326 Part No. TM 2331 FOR BPCL MODEL A-1400 PT TRIPLEX SINGLE ACTING PISTON PUMPS, SIZE : 190.5 MM(7.1/2) X 254 MM (10) & A-1700 PT SINGLE ACTING TRIPLEX PUMP GROUP : LINERS HAVING 8.1/2 O.D. THICK WALL 220 07148931 Liner, 177.8 mm(7) with packing, Bi-metallic, consisting of liner shell & liner sleeve, centri- fugally cast, alloy steel for shell & high chromium alloy for sleeve. Uniform & constant hardness RC61 to RC65 on sleeve & upto RC38 on shell.Sleeve is shrunk fitted, shell & sleeve honed to super high surface finish. Part No. S-18317-70 Part No. TM 9425 SLUSH PUMP VALVE & SEAT ETC.(FOR NAT.12-P-160 TRIPLEX POWER SLUSH PUMP) MISSION SUPREME 70 07164504 Polyurethene Valve Inserts which can with stand High Pressure and Severe Operating Condition. Shore Hardness : 90 Degrees +/- 5 Degrees.(Old Part No. DD7B)(National Oilwell Pt.No. 062-400-239) TENGL Pt. No. TM2007 Part No. TM2007 Part No. UDD-7B 90 07164309 Valve Assy. with Rubber/Polyurethane Insert Part No. (060-155-033) U5CEEF of NATIONAL OILWELL VARCO L.P. RIG Part No. 690031 of OTECO INC Part No. SE-VASG-35-7 of SUDARSHAN ELASTOMER PVT. LTD. Part No. TM2003 (TENGAL) 150 07164253 Seat, Valve Surface Hardness= 58HRC to 65 HRC Case Depth= 1.5mm to 2.2mm Part No. 061102505 7DD-B12 of NATIONAL OILWELL VARCO Part No. K7DD-B12 of KHALSA OIL FIELD EQUIPMENTS (P) LTD Part No. SE-VSO-45-7(NAT) of SUDARSHAN ELASTOMER PVT. LTD. Part No. TM2011 of TRACTOR ENGINEERS LTD. FOR BPCL (OIL WELL) MODEL A-1100 PT STANDARD SINGLE ACTING TRIPLEX HORIZONTAL PISTON SLUSH PUMP, SIZE : 190.5 MM(7.1/2) X 254 MM(10) VALVE & SEAT ETC. MISSION 160 07164606 Valve Seat Surface Hardness = 58 HRC to 65 HRC Case Depth = 1.5 mm to 2.2 mm Part No. TM 2012 SPARES FOR TRW MISSION CENTRIFUGAL PUMPS