Military Engineer Services-MES has published Repair Maintenance To Misc Items Of Work Roof Treatment With Tilings Repair To Window Shutter Etc For Domestic Depot Area At Unchibassi Under Ge ( S ) Pathankot- 1 Demolition Of Brick Work / Stone Masonrybuilt In Cement Mortar Including All Quoins,. Submission Date for this Tender is 26-07-2022. Coats and Jackets Tenders in pathankot Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 19-Jul-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 26-07-2022 |
| Sl. No. | Item Description |
| 1 | Demolition of brick work/stone masonrybuilt in cement mortar including all quoins, arches, pillars etc complete all as specified. |
| 2 | M & L for Brick work with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specified. |
| 3 | All as per Srl Item No. 02 above, but Except Bricks. |
| 4 | Brick work with sub class ‘B’ bricks, straight or curved on plan any radius in half brick thick wall with old size bricks built in cement mortar 1:4 complete all as specified. |
| 5 | Taking down cement plaster of any description including raking outjoints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 6 | M&L for Rendering 15mm thick in CM 1:4 using liquid water proofing compound on brick work or concrete surfaces on wall, surfaces finished even and smooth using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately under respective item). |
| 7 | M&L for Rendering 10 mm thick in cement and sand mortar 1:6 on other than fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 8 | M&L for Rendering 10 mm thick in cement and sand mortar 1:3 on concrete surfaces of ceiling/Top and sides of chajjas/facia of roof projection incl necessary formwork including finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 9 | Supply only Polymer liquid water proofing compound. |
| 10 | M&L for Preparation of newly plastered/ prepared surfaces of walls and applying three coats of white wash complete all as specified and directed. |
| 11 | All as per Srl Item No. 10 above, but on ceiling |
| 12 | M&L for Preparation of newly plastered/ prepared surfaces of walls and applying two coats of Oil Bound Distemper over a coat of primer to match the shade as per existing colour scheme/pattern complete all as specified and directed. |
| 13 | M&L for Preparation of newly plastered/ prepared surfaces of walls and applying two coats of cement base paint over a coat of primer to match the shade as per existing colour scheme/pattern complete all as specified and directed. |
| 14 | M&L for Preparation of newly plastered/ prepared surfaces of walls and applying two coats of Exterior Acrylic Emulsion paint over a coat of primer to match the shade as per existing colour scheme/pattern complete all as specified and directed. |
| 15 | Preparation of existing surfaces incl washing, rubbing down and stopping of painted surfaces of walls and applying one coat of white wash complete all as specified. |
| 16 | All as per Srl Item No. 15 above, but on ceiling |
| 17 | M&L for Preparation of existing surfaces incl washing, rubbing down and stopping of distempered and painted surface of walls and applying one coat of Oil Bound Distemper to match the shade as per existing colour scheme/pattern complete all as specified and directed. |
| 18 | M&L for Preparation of existing surfaces incl washing, rubbing down and stopping of painted surface of walls and applying one coat of cement base paint to match the shade as per existing colour scheme/pattern complete all as specified and directed. |
| 19 | M&L for Preparation of existing surfaces incl washing, rubbing down and stopping of painted surface of walls and applying one coat of Exterior Acrylic Emulsion paint to match the shade as per existing colour scheme/pattern complete all as specified and directed. |
| 20 | Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 21 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. (reinforcement cut as required to facilitate demolition) |
| 22 | M&L for 75mm thick PCC 1:4:8, type D-2 (using 40mm graded stone aggregates) as in sub base for pavement, path etc, complete all as specified and directed. |
| 23 | M & L for 50mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protection and similar works including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified. |
| 24 | M & L for 25 mm thick PCC 1:2:4 type B-0, using 12.50 mm graded stone aggregate, including finishing surface of concrete topping even and rough complete all as specified. |
| 25 | M & L for 40mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in floors and similar works, including finishing the surface of concrete topping even & smooth without using extra cement complete all as specified and directed. |
| 26 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified. |
| 27 | S & F for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade oftiles over and including 15 mm thick screed bed in cement and sand mortar 1:6, complete all as specified. |
| 28 | S & F for Glazed coloured ceramic tile 450 x 300 x 7mm thick (coloured) on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick plaster in cement and sand mortar 1:4 complete all as specified. |
| 29 | M & L for Non - skid Ceramic joint free tiles 7 to 8 mm thick coloured/wooden finish (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15 mm thick screed bed in cement and sand mortar 1:6, complete all as specified. |
| 30 | M & L for Non - skid Ceramic joint free tiles 7 to 8 mm thick coloured/wooden finish (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10 mm thick plaster in cement and sand mortar 1:4 complete all as specified.. |
| 31 | M & L for 18mm thick Udaypur Green Marble machine cut in any position bull nosed on front face, laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 15 mm thick screed bed in cement and sand mortar 1:4 complete all as specified and directed. |
| 32 | M & L for 18mm thick Granite (of any type) machine cut in any position bull nosed on front face, laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 15 mm thick screed bed in cement and sand mortar 1:4 complete all as specified and directed. |
| 33 | M & L for Rubbing and polishing of Existing Kota stone Flooring, Steps and Skirting complete all as specified and directed. |
| 34 | M & L for Coloured Chequered cement concrete tiles 30cm x 30cm x 20-22mm thick with grey cement and pigment, set, jointed and pointed in white or coloured cement to match the shade of tiles over and including 20 mm thick screed bed in cement and sand mortar 1:6, complete all as specified and directed. |
| 35 | M & L for Machine pressed precast concrete interlocking paver block incl 6-8 mm thick white cement layer coated with epoxy coating (Red/Yellow) built with grey cement and pigment of 60mm thickness, any shape and size confirming to IS incl 50mm thick sand filling under paver, properly levelled etc complete all as specified and directed. |
| 36 | All as per Srl item No. 35 above, but except tile/ paver block. |
| 37 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 38 | M & L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws etc complete all as specified. |
| 39 | M & L for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws etc complete all as specified. |
| 40 | Dismantling of plain or corrugated asbestos sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 41 | M & L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with L-type or J- type or cranked hook bolts etc complete all as specified. |
| 42 | All as per Srl Item No 41 above but except sheets. |
| 43 | M&L for Asbestos cement two-piece adjustable plain wing ridge 6mm thickfixed with L-type or J- type or cranked hook bolts complete all as specified and directed. |
| 44 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/ slabs/blankets, any thickness, including cover fillets complete all as specified and directed. |
| 45 | S&F GI snap grid frame work (Grid size 60x60cm) for false ceiling with powder coated GI angle of size 25x25mm, main runner "T" of size 25x40mm secondary runner "T" size 25x30mm suspended with 3mm GI wire with butterfly clips for levelling complete all as specified and directed. |
| 46 | M&L for False ceiling of 9.5mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) complete all as specified and directed. |
| 47 | M&L for non asbestos 4mm thick E- boards of size 60x60cm laid in GI grid for false ceiling purpose complete all as specified and directed. |
| 48 | Dismantling of Bricks (laid flat or on edge) or brick tiles in floors, etc. (each layer) laid,bedded and pointed in any mortar complete all as specified and directed. |
| 49 | Roughening surfaces of old concrete floor by picking,sweeping clean and washing down with water to remove dust etc and brusing neat cement slurry with 3.00kg per sqm all as spd & directed. |
| 50 | M & L for PCC (1:2:4) type B-1 using 20 mm graded crushed stone aggregate on roof slab including finishing the top surface even & smooth without using extra cement complete all as specified and directed. |
| 51 | M & L for Rendering 10 mm thick in CM 1:3 on flat roof surface mixed with liquid water proofing admixture as per manufacturer instructions when concrete surface is green, finished even and smooth without using extra cement all as specified. (Note :- WPC shall be measured and paid separetly). |
| 52 | APP modified roof treatment over existing accessible/non-accessible RCC roof slab/chajjah/canopy/parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc including dismantling existing water proofing treatment of any description complete all as specified and directed :-(a) Cleaning existing surface properly. (b) Applying oil bound bitumen primer @ 0.30 litre/Sqm manufacture by the same agency as that of APP with adensity of 0.87-0.89 Kg per litre at 25 degree centigrade on prepared surface.(c) Laying not less than 3mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non-woven polyster fiber of weight not less than 160 gsm/sqm using butane torch by torch application with 10 cm side laps and 15 cm end lap. Laying of membrane , physical property of membrane shall be as under :-(i) Membrane weight not less than 3.60 Kg/Sqm. (ii) Non woven polyester weight not less than 160 gsm/sqm. (iii) Softening point of membrane not less than 150 degree celcius. (iv) Joint tensile strength - longitudinal not less than 650 sqcm and transverse not less than 450 sqcm at 230 degree celcius.(v) Tear strength- Longitudinal not less than 300 N and transverse not less than 250 N. (vi) Elongation and reinforcement not less than 30%.(vii) Impermeability under water pressure not less than 3 kg/sqcm.(d) APP membrane shall be laid using butane torch by Torch application with minimum 10 cm side overlap and 15 cms end lap. |
| 53 | M & L for cement concrete tiles 30cm x 30cm x 20-22mm thick with grey cement and no pigment, machine pressed, set, jointed and pointed in white or coloured cement to match the shade of tiles over and including 20 mm thick screed bed in cement and sand mortar 1:6, complete all as specified and directed. |
| 54 | M & L for 40mm thick brick tiles laid on 20mm thick screed bed in cement mortar 1:6 and joints grouted flush in cement mortar (1:3) even and levelled, complete all as specified and directed. |
| 55 | All as per Srl item No. 54 above, but except tile. |
| 56 | Taking down chowkhats or frameswith shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each and removing from site complete all as specified and directed. |
| 57 | All as per Srl item No. 56 above, but area exceeding 1.5 sqm and not exceeding 4.00 sqm each, complete all as specified and directed. |
| 58 | Taking down shutters of any description, area not exceeding 1.00 sqm each, complete all as specified and directed. |
| 59 | Taking down shutters of any description, area exceeding 1.00 sqm and not exceeding 2.00 sqm each, complete all as specified and directed. |
| 60 | S & F for Pressed steel frames of size 105 x 60 mm for doors with one or more rebates incl necessary fixing lugs,hinges, lock strike plate, incl filling of PCC 1:3:6 type C-1 using 12.5mm graded stone aggregate as in frames/hold fast blocks complete all as specified and directed. |
| 61 | S & F for Pressed steel frames of size 125 x 60 mm for doors with one or more rebates incl necessary fixing lugs,hinges, lock strike plate, incl filling of PCC 1:3:6 type C-1 using 12.5mm graded stone aggregate as in frames/hold fast blocks complete all as specified and directed. |
| 62 | S & F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed. |
| 63 | S & F for Factory made solid panel PVC door shutter 30 mm thick both side prelaminated with wood grain/coloured paint (style) consisting of frame made out of M.S. tubes for top & bottom rails complete all as specified and directed. |
| 64 | S & F for Factory made 35 mm thick, 2nd Class hardwood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 65 | S & F for Factory made 35 mm thick, 2nd Class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc, supplied and fitted to chowkats complete all as specified and directed. |
| 66 | S & F for Factory made 20 mm thick Flush shutters, solid core construction and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 67 | S & F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, door shutters; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work, complete all as specified and directed. |
| 68 | S & F for Z-Section Steel windows/ ventilators with side hung shutters including projecting type hinges with 2 Nos steel handle, 2 Nos Tower Bolt and 01 No steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and directed. |
| 69 | All as per Srl Item No 68 above but without glazing bars. |
| 70 | Painting to newly surfaces of wood or wood based surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, with two coat of synthetic enamel paint over a coat of pink primer complete all as specified. |
| 71 | Preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and priming with red oxide zinc chrome and painting with two coats of synthetic enamel paint complete all as specified and directed. |
| 72 | M&L for Painting to old painted surfaces of wood or wood basedsurfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, with one coat of synthetic enamel paint to match the shade as per existing colour scheme/pattern complete all as specified and directed. |
| 73 | M&L for Preparation ofold painted steel surfaces of any descriptionexc 10 cm width or girth and painting with one coat of synthetic enamel paint to match the shade as per existing colour scheme/pattern complete all as specified and directed. |
| 74 | Taking down steel window/gate/door shutter of any description for repair purpose such as welding etc, incl replacement of MS tower bolt/ handle/ peg stay to make the shutter serviceable and refixed in same position after complete repair, complete all as specified and directed. |
| 75 | Taking down steel rolling shutters of any description area not exc 10 Sqm complete all as specified and directed. |
| 76 | S&F Steel rolling shutters, 1.25mm thick lath without ball bearing in, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position push pull or manual type complete all as specified and directed. |
| 77 | Supply only Safety lever locks mild steel with 4 levers for rolling shutters,complete all as specified and directed. |
| 78 | Supply only Ball bearing for rolling shutters, complete all as specified and directed. |
| 79 | Taking down steel rolling shutter of any description for over hauling repairs/replacement of lath strips, guide channel, hood cover, lock plate bracket plate, helical spring, ball bearing etc and refixing after complete repair, incl greasing oiling etc for smooth functioning in position of area of rolling shutter n exc 10 Sqm, complete all as specified and directed. |
| 80 | Taking down sliding steel door of any description for over hauling repairs, replacement of rolling wheel, ball bearing , repairing rolling track etc and refixing after complete repair, incl greasing oiling etc for smooth functioning in position of area of shutter n exc 10 Sqm, complete all as specified and directed. |
| 81 | Supply only roller wheel, axle, nut and bolt with locking pin etc. for sliding steel door complete all as specified and directed. |
| 82 | S & F for Butt Hinges, 100 mm long medium weight, complete all as specified. |
| 83 | S & F for 300mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixedwith hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section complete all as specified. |
| 84 | S & F for 150mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified. |
| 85 | S & F for Aluminium handles cast type anodised of size 125mm long ISI markedcomplete all as specified & directed. |
| 86 | S & F for continous (Piano) type hinges mild steel bright finish or electrogalvanised with wide of flaps 40mm, complete all as specified & directed. |
| 87 | S & F for 150 mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate, ISI marked complete all as specified. |
| 88 | S & F for Floor door stopper of aluminium alloy body, two legged not less than 50mmcomplete all as specified & directed. |
| 89 | S & F for 40 mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified. |
| 90 | Hasp and staple of size 100 mm, safety type, aluminium anodised with hinge pin incl bolt to hinge plate and fixed with screw complete all as specified. |
| 91 | Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones glazed with oil putty fixed with beads or in wooden shutters complete all as specified and as directed. |
| 92 | S & F for 03 mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified. |
| 93 | S & F for 03 mm thick figured (frosted) glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified. |
| 94 | Galvanized mild steel wire-cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples complete all as specified. |
| 95 | All as per the description of item No.94 above but fixed in repair. |
| 96 | M & L for Ball catcher with proper magnetic effect fixed with shutter complete all as specified and directed. |
| 97 | S&F 20 mm bore PVC Coated MS curtain rod, length of one rod not more than 1.5 Metre including a pair of brackets and knobs with each length/ piece, fixed on doors and windows opening for hanging curtains complete all as specified and directed. |
| 98 | S & F Rotational moulded polyethlene water storage tanks of capacity 500 litres three layers(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of existing PVC tank of any capacity complete all as specified & directed. |
| 99 | All as per Item No 98 Above but 1000 Litres Capacity. |
| 100 | S & F 20mm dia for Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed, complete all as specified and directed. |
| 101 | Mild steel TMT bars 10 mm dia and over, quality conforming to Grade 415 MPA cut to length , bent to shape required including cranking , bending and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 102 | Providing cement concrete Type B-1, 1:2:4 (20 mm graded crushed stone aggregate) as in landings, Parapet walls, facia, cover slabs upon drainage system incl necessary form work etc, complete all as specified and directed. |
| 103 | PCC (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in benching, coping & hanuching etc complete all as specified and directed. |
| 104 | M&L for Cement concrete 1:3:6, type C-1(using 20mm graded crushed stone aggregate) as in surface channels and drains complete all as specified and directed. |
| 105 | Extra for forming fair faces (finished) drain of channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitered stopped end etc complete all as specified and directed. |
| 106 | Providing Reinforced cement concrete Type B-1, 1:2:4 (20 mm graded crushed stone aggregate) as in Slabs supported on walls, landings, balconies, canopies, deck slabs and in shelves and the like incl necessary form work etc, complete all as specified and directed. |
| 107 | Note: In case the tenderer quotes different rates for similar item then lowest rate shall only be applicable for payment and contractor shall not have any claim on this account. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
