|
| 1 | Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed and also removal of all debries out of premises ad dircted by Engr-in-Charge. |
| 2 | Excavation in trenches nexc 1.50 mtr wide and n exc 1.50 mtr depth n exc 10Sqm on plan for foundation and getting out in hard/dense soil complete all as specified & directed. |
| 3 | Excavation in trenches for laying of cables, poles and stay in any type of soil not exceeding 1.5 mtr wide and not exceeding1.50 mtr deep and getting out in soft loose soil complete all as specified and directed. |
| 4 | Returning, filling in, including spreading levelling watering and well ramming in layers nexc 25cm as in soil complete all as specified and directed. |
| 5 | Removing excavated material nexc 50m and depositing where directed at a level nexc 1.5m above the starting point with soil complete all as specified and directed. |
| 6 | M&L cement concrete (1:4:8) type D-2 (40 mm graded stone aggregate) as in sub base, Mass Concrete complete all as specified and directed. |
| 7 | M&L RCC M-25(Design Mix) (20 mm graded stone aggregate) as in foundation, raft, footing, plinth beam, base for column etc complete all as specified and directed. |
| 8 | M&L RCC M-25(Design Mix) (20 mm graded stone aggregate) as in column complete all as specified and directed. |
| 9 | M&L RCC M-25 (Design Mix) (20 mm graded stone aggregate) as in beams, chajjaetc complete all as specified and directed. |
| 10 | M&L RCC M-25 (20 mm graded stone aggregate) as in slabs suppoorted on walls,beams and column in floors, roof, landings, balconies, canopies, deck slab and in shevels the like complete all as specified and directed. |
| 11 | Formwork to sides of concrete foundations,footings, bases of columns, raft and raft beams, sidesand soffits (if any) of foundation and plinth beams; andsimilar work; vertical or to batter rough finished concrete surfaces. |
| 12 | Formwork to sides of pillars, piers,columns,square, rectangular, polygonal, circular on plan rough finished surfaces of concrete completed all as specified and directed. |
| 13 | Formwork to sofits of suspended slabs such as roof slabs, floors slabs, landings and similar work not exceeding 200mm thick (horizontal or sloping) for rough finished surfaces of concretecompleted all as specified and directed. |
| 14 | Formwork to sides and sofits of floor or roof beams, beam haunching, bressummers, lintels, cantilevers, shelves including supports overhangs etc also splays between floors and beams etc rough finished surfaces of concrete completed all as specified and directed. |
| 15 | S&F MS TMT bars10mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping forcolumns, hooking ends and binding with mild steel wire (annealed)not less than 0.90mm dia complete all as specified and directed confirming to Fe 500 or Fe 550. |
| 16 | Same all as Item Srl No 15 above but 6mm to 8 mm dia |
| 17 | Same all as Item Srl No 15 above but 8 mm dia and over upto and including 10mm dia in stirrups, spacers and binders. |
| 18 | M&L brick work with sub class \"B\" old size bricks straight or curved on plan exc 6m mean radius built in CM 1:6 all as specified and directed |
| 19 | M&L 15mm thick Renedering on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed. |
| 20 | M&L 15mm thick rendering on fair faces of brick surfaces in CM (1:4) finished surfaces even and smooth without using extra cement complete all as specified and directed. |
| 21 | Same all as Item Srl No 20 above but 10 mm thick in CM (1:3) on ceiling complete all as specified and directed. |
| 22 | S&F 2nd class hard wood plain, solid, straight and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints including back side painted with black japan, complete all as specified and directed. |
| 23 | M&L 35 mm thick 2nd class Hard wood (Factory Made)Plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 24 | M&L 35mm thick(2nd class hardwood) (Factory made ) Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.20 (a); supplied and fitted to chowkatscomplete all as specified and directed. |
| 25 | S&F factory made steel windows with side hung shutters including projecting type hinges with lugs steel handles and steel peg stays, with glazing bars, devetailed or welded complete all as specified and directed. |
| 26 | Same all as Item Srl No 25 above but without glazing bars. |
| 27 | M&L Mild steel work framed such as grills, gratings etc. with ends of bars souldered or or rivetted or forged into spikes, framed guard bars, frame works of water tanks and similar work complete all as specified and directed conforming to Fe-250 Gde-165. |
| 28 | S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 29 | M&L Sheet glass ordinary quality and glazing with oil putty in square n. exc. 0.5 sqm in each pane 3 mm thick complete all as specified and directed. |
| 30 | S&F 100mm long Butt hinges MS cold rolled (medium wight) complete all as specified and directed. |
| 31 | S&F 300mm long aluminium alloy.anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 32 | S&F aluminium, anodised, barrel tower bolts of extruded section and fixed of size 125mm long complete all as specified and directed. |
| 33 | S&Faluminium anodised handlefabricated typeof size150 mm complete all as specified and directed. |
| 34 | M &L for PCC 1:3:6 type C1 using 20mm graded stone aggregate as in coping of pole ect including form work & finishing the surfaces even & smooth with out using extra cement complete all as specified and directed. |
| 35 | M&L two coats of synthetic enamel paint over new prepared steel surface over a coat red oxide primer over 10 cm width or girth complete all as specified and directed. |
| 36 | M&L for two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces over 10 cm width or girth including preparation of new wooden surfaces complete all as specified and directed. |
| 37 | M&L machine cut kota stone slab flooring of size 600 x 450mm x 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigments to match the shade of the slab including rubbing and mirror polishing including15mm thick Screed bed or bedding layer of mortar in CM (1:6) complete all as specified and directed. |
| 38 | M&L machine cut kota stone slab as in vertical surfaces, skirting, dado10-15 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigments to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed. |
| 39 | M&L moorum/red bajri filling in floors or pavings laid in layers nexc 15cm thick spread levelled and rammed including watering complete all as specified and directed. |
| 40 | M&L 100mm thick PCC (1:4:8) type D-2 (40 mm graded stone aggregate) as in sub base, finished even and fair complete all as specified and directed. |
| 41 | M&L for 75mm thick cement concrete 1:3:6 type C-2(using 40mm graded stone agg) as in plinth protection laid to slope in bays and finishing the surfaces of concrete topping fair and even and exposed edges fair or rounding or chamfering laid in panels with and including all necessary form work and filling the joints with mastic filling of one part of hot bitumen 85/25 grade and three part of fine sand (all by weight) complete all as specified and directed. |
| 42 | M&L 40mm thick cement concrete type B-1(1:2:4)(20 mm graded stone aggregate) as in floor finished even and smooth without using extra cement complete all as specified and directed. |
| 43 | Supply only integral water proofing compound complete all as specified (ISI Mark). |
| 44 | M&L for preparation of new plastered surfaces and and applying two coats of cement base paint over a coat of white cement primeron walls completeall as specified and directed |
| 45 | M&L for three coats of white wash (lime) on newly plastered surfaces on wall including preparation of new plastered surfaces complete all as specified and directed. |
| 46 | M&L for three coats of white wash (lime) on newly plastered surfaces on ceiling including preparation of new plastered surfaces complete all as specified and directed. |
| 47 | M&L anti-termite Treatment of soil inder floors using emulsion @ one litre per litre per hole, 300mm apart incl drilling and plugging 12 mm dia holes with CM 1:2 to match the floors complete all as specified. |
| 48 | M&L for anti-termite Treatment along the external wall below concrete or masonry apron using chemical emulsion @2.25 litres per linear meter incl drilling and plugging holes etc.in apron complete all as specified. |
| 49 | M&L for 80 mm thick rubber mould reflective factory made coloured pre cast PCC interlocking paver blocks/ tiles confirming to IS 15658-2006, M-35 designation of section as approved by GE in hard standing, laid dry over & including 50mm thick sand cushion and filling the voids of paver blocks/tiles with dry sand complete all as specified & directed.Make :- Mehtab Tiles, Indore (MP) or Nitco, Mumbai or Mayur Tiles & Interlocking pavers, Lucknow or Star Tiles & Industries, Ramadevi, Kanpur as approved by GE. |
| 50 | M&L providing cement concrete 1:5:10 type E2 using 40mm graded stone aggregate as in foundation |
| 51 | M&L for 30mm thick crushed stone sand/ river sand as in cushening layer below interlocking paver tiles well compacted to a true surface. |
| 52 | M&L Stone kerb of machine pressed coloured precast cement concrete (1:2:4) type B1 using 20mm graded stone aggregate, block of size 30cm x 30cm x 15cm finished at top bullnosed shape and finished surface even and smooth using coloured pigment and jointed in CM 1:6 struck finished, applying two coats of paints in zebra pattern as directed by Engr-in-Charge |
| 53 | Point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm stranded for earth continuity wire, to be drawn in and including, PVC medium grade onduit not less then 20 mm widthwith MS sheet metal sunken switch/Terminal box 1.2 mm thick and ebonite switch board cover 3.0 mm thick or PVC moulded switch board and brass screws with cup washers including all necessary wall cutting and making good disturbed surface allas directed and specified.Note : (i) Making good to match with the adjoining surface shall be included in the unit rate. (ii) Rate is inclusive of Cutting/chases of wall/floor/ceiling. |
| 54 | One light point controlled by one, one way switch. |
| 55 | One 3 pin 5 amp socket out point on the same board with other switches. |
| 56 | One 3 pin 5 amps socket out let point on independent board |
| 57 | Same all as Item Srl No 53 above but for one socket outlet 15 Amp on independent boardwith2.5Sq mmcableand1.5Sq mmearthwire. |
| 58 | S &F Switch piano flushtype single pole one way 5 amps. |
| 59 | S &F Socket out let 2 in one, 5/3 pin 5 Amps. |
| 60 | S &F Switch socket combination 5 Amps 5 pin flush type |
| 61 | S &F Switch socket combination 5 in 1, 5 pin5/15 Amps flush type universal . |
| 62 | S &F Ceilingrose, surface bakelite 65x50 mm three terminal |
| 63 | S &F Electronic regulator 100/120 Watt step type |
| 64 | S &F Lamp holder insulated body with back plate for angle holder all as perspecified |
| 65 | S &F in repairLED tube light fittings decorative ultra slim linear fixture with extruded with heat sink envioromentel friendly Energy efficient ready to use pack, 1 x 10 Watt, 2 feet, surface mounting type extruded PVC, snap on installers and domestic electronicDriver, connector block etc with all accessories intenallt prewired &includingc oneecting up with 2 core flexible cppper conductor cable with sutable size & suitable forand mounting clampsPVC squre box 75 x 75mm - 2 nos etc. Make- Philips ultron 17 Watt wall light (cool white round) or Jaquar LED Luke wall light 5 Watt, or Havells LED Streek track light 7 Watt white. |
| 66 | S &F in repair LED tube light fittings decorative ultra slim linear fixture with extruded with heat sink envioromentel friendly Energy efficient ready to use pack, 1 x 24/36 Watt, 4 feet, surface mounting type extruded PVC, snap on installers and domestic electronicDriver, connector block etc with all accessories intenallt prewired &includingconeecting up with 2 core flexible cppper conductor cable with sutable size & suitable forand mounting clampsPVC squre box 75 x 75mm - 2 nos etc. Make- Havells Higher Wattage LED Lighting fixture LHEXACP7IN1W025 (25W, 6500K), Or BAJAJ VIVA Series LED tube light BCLAB 20W, or Philips smart wiz Wi-Fi Batteb 4ft 24 W2600 Lm tunable |
| 67 | S & Fin repair LED light fittings decorative 36/34 Watt recess mounting 2\" x 2\" type extruded metal/aluminium body,andelectronic LED driver, connector block etc with all accessories internal prewired &including connecting up with 2 core flexible cppper conductor cable with suitable sizeand mounting clamps etc.Make- Havells plano 2 x 2 grid panel 42 watt or Jaquar 24 w ultima ultra 2 x 2 high lumen panel or Philips lighting RC370B24-Watt LED Recessed full glow 2 x 2 panel (cool day light, white) |
| 68 | S &F earth enclosure with 2 pin earth plug sokcet complete with MCB SP 25 amp, flush mounting type |
| 69 | Sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 6 Sq mm, earth continuity conductor of size 4 Sq mm to be drawn through and including PVCconduit 25 mm dia medium grade conceled in walls/roof/floorsall as directed by Engineer-in-Charge.Notes :- (i)Two wires of 6 Sq mm and one wire of 4 Sq mmand one run of PVC conduit shall be measured as one unit. |
| 70 | Sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 4 Sq mm, earth continuity conductor of size 2.5 Sq mm to be drawn through and including PVCconduit 25 mm dia medium grade conceled in walls/roof/floorsall as directed by Engineer-in-Charge.Notes:- (i)Two wires of 4 Sq mm and one wire of 2.5 Sq mmand one run of PVC conduit shall be measured as one unit. |
| 71 | MCCB DB VERTCLE TYPE made of sheet steel, powder painted with NUTRAL bus bar 200 A, neutral link,IP-43-IK09 protection grade, 415Volts TPN with 4 way Double door. |
| 72 | MCB DB made of sheet steel , powder painted withNUTRAL bus bar 200 A, neutral link, earth bar and Din rail , 240Volts SPN with 8 way Double door, IP-43-IK09 protection grade. |
| 73 | MCB SPN 240 Volts, \"C\" series, breaking capacity 10 KA of rating 6-32Amps |
| 74 | MCB SP 6-32 Amps\"C\" series, breaking capacity 10 KA of rating |
| 75 | MCCB TPN 100 Amps , 415Volts, 25KA, 4 POLE |
| 76 | Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm buried directly in ground vertically to a depth not less then 2.25 meter below normal ground level with top edge of the plate not less then 1.50 meter below normal ground level connected to galvanized earth wire 4.00 mm dia by means of bolts, nuts, check nuts and washers complete up to and including test point made out of 40 x 6 mm alum flatincluding earthingpit, charcoal common salt, Earthing lead 4.00 mm dia up to 7.5 m, 20 mm dia medium grade GI watering pipe, G.I. protection pipe 15 mm dia up to 7.5 m long, PPC pit in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate, PCC pitcover including earth work complete all as shown in electrical plate No-3 of SSR-2009 (Part-I) |
| 77 | Fabricate,supply & fix GI pipe bracket suitable for 10/15w security light fitting, made out of 25mm dia- 0.9m long & 2 set of clamps made out of 30 x 5mm ms flat & fixed with anchor bolt including Taking down of old unserviceable bracket |
| 78 | Supply and fix in repair LED security light fitting of 40/45 watt, aluminium pressure dia cast IP 66 with high power LED & LED driver of makePhilips Smartbright 6500K Street light, BRP046 LED 30 CW MR S1 PSU GR, or Havells Endura citylite platinum plus street light 35W, or Bajaj BRTFG 45W street light flood light. |
| 79 | S & F in repair globe light 24 Watt mounted on wall energy efficient, water resistant E27 base of size 25.5 x 20.5 x 25.5 CM with 18-24 watt LED bulb with white colour all as specified and directed by Engr-in-Charge.Make - Philipscat/product No 71797/46/31 24-watt mygarden wall light (white and Synthetics) or havells cat/ code No LHFOAJE1TZ1/060 (Havells floretine 1 LS wall light SS or equivalent of Jaquar. Note :-LED bulb ratewill included in coated rate and in case of unavaibility ofequivalent make, specified product of mentioned Cat/Ordershall approve for installation. |
| 80 | S&F outdoor garden bollard light, 10 Watt, IP-65, with excellent light out put through its PMMA window ensuring maximum illumination aspect in surrounding with all accessories complete all as specified and directed by Eng-in-Charge. Make- Havells Item Ccode: WWH-MOUNTBL10WLED830PSYMTOPMMA, CDL-MOUNTBL10WLED857PSYMTOPMMA or Philips Hue White Tuar Led Outdoor Lamp orBajaj Tetris LED Bollard Light BGBOS 600 9W LED |
| 81 | Supply & Fixin repair 300 mm Sweep exhaust fan of size 395mmx395x210mm (lengthxwidthxdepth) with double ball bearing heavy duty, 230 volt, protective bird guard, robust construction, high velocity with louer complete nut, bolts as per site requirement all as directed by Engr-in-Charge.Make Havells Ventil Air DB 300 Exhaust fan (Pista Green), or Usha 300 mm aeroclean plus metal exhaust, double ball bearing, (grey) or Bajaj Bahar 300 mm exhaust fan (Metallic grey) |
| 82 | S&F in repair wall mounted fans 450 mm sweep with 3 blades with three number speed settingincluding mounting accessories kit, 1400 rpm,all as specified and directed by Engr-in-Charge.Make Havells V3 450 mm (silver/Black), or,Orient electric 450 mm Tornado (black metal) or Usha colossue rust free aluminium blade (Red). |
| 83 | Supply & Fix in repair ceiling fan of 1250 mm sweep glaze fan, elegant white, exotic rich look with modern styling, air delivery 280 cum mtr/minut, rated seed 280 RPM, blade finish, dust and mark resistant, stronge 18 pole high torque motor,frequency 50 HZ, with dust and mark resistant coating including Fan motor, blade set, downrod, canopy set, shackle kitand twisted wire, guarantee card with two year warrenty on productwith complete accessories all as directed by Engr-in-Charge.make Havells Havells stealth air (elegant white) or Crompton SilentPro Enso 1200 mm 3 blade (silk White) or Orient electric aeroquiet 1200 mm premium (white). |
| 84 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35.0 sq mm 3.5 core |
| 85 | unwashed Sand cushioning to under ground cable provided with a layer of 8 cm deepbefore laying and 15 cm covering above the top edge of cable after laying complete all as specified.Note : maesurement shall be done after puning down of sand. |
| 86 | Brick covering with width equal to length of bricks as mechanical protection to cable with well burnt sub class `B` bricks laid dry and flat complete all as specified and as directed. |
| 87 | Steel tubing GI light grade for cable protection passing under road /floor or for fixing to poles all as specified and as directed of size 50 mm dia. Make - ITC / JINDAL /ZENITH/TATA/ PRAKASH SURYA |
| 88 | Geographical survey of ground water from any approved hydrologst agency to explore the ground water potential of the are & submitting the technical report to department giving recommendation on feasibility of tube well at particular location and report to be submittedand approved by GE before drilling the borewell complete all as specified and directed. |
| 89 | Drlling of trial bore well 200mm dia. In any type of soil/rockby rotary fast rig method or any other approved method of depth not exceeding 80 m at alocation approved by GE based on soil investication report and disposal of waste material incl. following job comlete all as spcified & directed.Note :-(a)Collection of soil sample of bore at every 1m depth & submission to department with strata chart(b)Collection of water sample from bore well & getting them tested fromchemical & bictorigical analisys from recognised institution approved by govt.(c)Test on quality of water for drinking purpose.(d)Payment will be made for only successful trial borewell.No extra payment made for extra trial borewell for same borewell. |
| 90 | All as per Srl item No 86 here-in-before but exceeding 80m in depth but not exceeding 175m in depth |
| 91 | Supply and lowering plain PVC casing pipe of outer dia 200mm , wall thickness not less than 5.7 mm conforming to IS specification complete all as specifiedanddirected. |
| 92 | Supply and lowering plain PVC ribbed screen pipe of outer dia 200mm , wall thickness not less than 5.7 mm conforming to IS specification complete all as specifiedanddirected. |
| 93 | M& L for foundation of size 100 x 100 x 100 cm at ground lvel for holding tube well made of palin cement concrete 1:2:4 type B-2 (usig 40mm graded crushed stone aggregates), including necessary Earth work, excavation, returning filling, recoval etc all as directed bythe Engineer-in-Charge. |
| 94 | Supply, lowering and fixing MS Column pipe, heavy duty ISI Marked both end flanged 80 mm dia bore in 3 mtr length having wall thickness 4.85 mm as per IS-1239 complete including rubber gasket slot cutting in flanges for passing of submersible cable and nut bolts etc complete all as specified and directed bythe Engineer-in-Charge. |
| 95 | Fix cost for MS reducer, bail plug, well Cap, MS etc strip for centring, MS iron clamps, electric logging and simple strata box complete all as specified and as directed. |
| 96 | Development of tube well with compressed air and after with 25% extra capacity pump by pumping muddy water complete all as specified and as directed. Note.All rate inclusive with compactor all arrangement with diesel etc as directed by Engr-in-Charge. |
| 97 | Yield test for the bore well by continuously pumping for 16 hours to determine safe pumping yield complete all as specified and as directed.All rate inclusive with compactor all arrangement with diesel etc as directed by Engr-in-Charge. |
| 98 | Supply and fixing in position mild steel cap made of MS plate 5mm thick with an internal threading and locking arrangement having opening for column pipe and submersible cable for housing pipe of 200 mm dia etc complete all as specified and as directed. |
| 99 | Sample strata box made out of 20mm thick veneered particle board and 12mm thick plywood with 25mm x 25mm aluminium angle 2mm thick base overall lengrth 1200 x 750 x 100 mm with front glass sheet sliding type cover with aluminium frame all around with 2 Nos Key holes plates of size 40 x 25mm and 3mm thick complete showing name of tubewell location and strata chart of ground data showing diferent types of strata and selection of casing pipe etc complete all as specified and as directed by the Engr-in-Charge including painting of synthetic enameled paint over to a coat of wood primer. |
| 100 | Supply, fixing testing and commissioning ofsubmersible pumps 415 volts, 3 Phase system of size 5 HP , LPM 120 to 170 LPM Head 90 to 130 Mtr capacity 50 Hz, 8 to 12 stage with delivery size upto 80mm suitabelfor 6 \" to 8\" bore complete all as specified and as directed. Make : Kirloskare/Crompton/Lubby. |
| 101 | M&L Fully Automatic Star Delta Motor starter 5 HP in sheet-steel enclosure type MK-1 .feature (Motor Rating AC-3 Duty, 415V, 50Hz, 3-Ph) and Relay Range 11-18 complete all as specified. Make : L&T/SKN/SIEMENS |
| 102 | Supply, fixing testing and commissioning ofsubmersible cable 3 core, 10 Sqmm PVC sheathed 1100v grade with copper conductor complete all as specified and as directed. (1 Working + 1 Standby ) Make : Havells/Plaza |
| 103 | Demolition of cement concrete unreinforced in ground floors and pavings n.exc.15 cm thickness (below or above ground level) complete all as specified and directed. |
| 104 | M & L for construction of valve chamber of internal size 600 x 600 x 900 mm suitable for 80mm dia sluice valve including necessary earth work excavation PCC 1:4:8 in foundation type D2 using 40mm graded stone aggregate, brick wall in CM 1:4, PCC 1:2:4 type B1 for coping, 15mm thick rendering in CM 1:4 including provision of MS sheet cover 3.0mm thick with MS angle frame 25 x 25 x 3mm all round and at diagonals of size 40 x 40 x 6mm and also MS plate welded to MS angle as shown in drawing, embedded in concrete with suitable hinges and locking arrangements, including two coats of synthetic enamel paint over a coat of red oxide primer necessary excavation earth work etc, all as specified and as directed. |
| 105 | Supply, fixing, laying & testing galvanised iron water tubing \"medium grade\" with and including all GI fittings such as flanges, unions, reducer sockets, socket, reducing bends, elbows, tee, checknuts, caps, plugs etc. laid in trenches, connecting in new or old position, complete all as specified and directed for the following bore of pipes: - |
| 106 | 25 mm bore. |
| 107 | 50 mm bore. |
| 108 | 80 mm bore. |
| 109 | 100 mm bore. |
| 110 | Supply and lay 3 layer PP-R Polypropylene rando copolyer concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supplyof 50 mm dia all PP-R plain & brass threaded polypropylene random fittings lain intrenches/wall/ceiling or laying in floors complete of size outer dai 50 mm includingunions, reducer sockets, socket, reducing bends, elbows, tee, checknuts, caps, plugs etc all fittings complete all as specified and as directed. |
| 111 | Supply and lay 3 layer PP-R Polypropylene rando copolyer concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supplyof 75 mm dia all PP-R plain & brass threaded polypropylene random fittings lain intrenches/wall/ceiling or laying in floors complete of size outer dai 75 mm includingunions, reducer sockets, socket, reducing bends, elbows, tee, checknuts, caps, plugs etc all fittings complete all as specified and as directed. |
| 112 | Supply and fix cast iron sluice Valves 50 mm (2\")dia , with stainless steel spindle and cast iron hand wheel complying with IS: 14846-2000, class PN 1.6 both ends flanged with 2 Nos rubber insertion gasket hoints, nuts, bolts & washers etc complete all as specified and as directed. Make : Kirloskar, RAMCO/UPADHIYAY |
| 113 | Supply and fix cast iron sluice Valves 80 mm (3\")dia , with stainless steel spindle and cast iron hand wheel complying with IS: 14846-2000, class PN 1.6 both ends flanged with 2 Nos rubber insertion gasket hoints, nuts, bolts & washers etc complete all as specified and as directed. Make : Kirloskar, RAMCO/UPADHIYAY |
| 114 | Supply and fix cast iron sluice Valves 100 mm (4\")dia , with stainless steel spindle and cast iron hand wheel complying with IS: 14846-2000, class PN 1.6 both ends flanged with 2 Nos rubber insertion gasket hoints, nuts, bolts & washers etc complete all as specified and as directed. Make :Kirloskar, RAMCO/UPADHIYAY |
| 115 | Supply and fix Valve, globe conforming to IS 9338,50mm(1”) dia complete all as specified and as directed. |
| 116 | Supply and fix Valve, globe conforming to IS 9338,50mm(2”) dia complete all as specified and as directed. |
| 117 | Supply and fixing Rotational moulded poly-thylene of 2000 litres capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed by Engr-in-charge. (ISI Mark) |
| 118 | Supply and fixing Rotational moulded poly-thylene of 1000 litres capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed by Engr-in-charge. (ISI Mark) |
| 119 | Supply install commissioning and testing CPRI Approved factory fabricated, floor mounted outdoortype LT Feeder Pillar Box of suitable size fabricated out of 3.15 mm thick CRCA Sheet and angle iron 50 X 50 X 6 mm frame and 750mm above the Normal ground level complete factory made totally enclosed dust and vermin proof double door both side hinge opening arrangement on front and back with locking arrangement cable entry andexist from bottom with cable glands and gaskets, aluminium bus bar 250 Amps rating (01 Set) fixed on porcelain insulator with internal wiring with suitable size of aluminium strips to be used for incoming and outgoing connection of all switches/MCCB\"s & Bus-bar. Bus-bar shall be insulated with colour code sleeves/tapes and to be connected with copper lugs, including two coats of synthetic enameled paint on the surface externally & internally over a coat of red oxide primer paint incl. necessary excavation , earth work completely PCC (1 : 3 : 6) type C2 as in foundation all as directed, comprising of the following : - |
| 120 | (a)INCOMING |
| 121 | (i)Thermal magnetic and microprocessor release MCCB 100 Amps, 4 Pole, 36 KA with front operated locking device. - 01 Nos |
| 122 | (b)OUTGOING |
| 123 | (i)Thermal magnetic MCCB 63 Amps, 4 Pole, 415V, 25 KA. Qty- 01 Nos |
| 124 | (ii) MCB 32 Amps, 2 Pole. Qty- 01 Nos |
| 125 | (c) (i)Digital Voltmeter 0 - 500 Volts with selector switch - 1 Set. |
| 126 | (ii)Digital Amperemeter 0 - 200 Amps with selector switch - 1 Set. |
| 127 | (iii) Indicator Lamp - R - Y - B (Set of three). |
| 128 | (iv)Frequency meter 40-55 Hz - 01 Nos |
| 129 | Supply and lay cable XLPE insulated screened PVCbedded galvanizedsteel strip or wire armouredelectric power cables (heavy duty ) 1100 volts(Earthed) grade with stranded aluminiumconductorof size 35 Sqmm 4 core complete all as specified and as directed. |
| 130 | M & L for earthing complete with galvanized steel earth plate electrode 60cm x 60 cm x 6mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground levelconnecting to and including GI steel strip of size 32 x 6 mm by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 40 mm dia medium grade pipe for protection ofGI strip to the extent of 7.5 mtrs as earthing lead 40 mm dia GI Pipe for watering including charcoal dust and salt packed all around the earth plate in the earth pit all as per Electrical plate No 3 of SSR part - I (2009) including necessary excavation earth work in any type of treta completely PCC foundation/chamber in mix 1:2:4 type B1 with angle iron frameCI frame, CI cover with provision of locking arrangement and 20 mm dia light grade GI pipe from top edge of the earth plate upto MS funnel with wire mesh provided inside the concrete earth pit for watering arrangement complete including excavation and earthwork in any type of strata and testing complete including fill up the earth pit with soil for best result and removal.Note :- Earth protection pipe & earthing strip upto and including 7.5 m length is deemed included in unit rate quoted by the contractor. |
| 131 | M & L for earthing complete with galvanized steel earth plate electrode 60cmx60 cmx 6mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground levelconnecting to and including GI earth wire of size 4.0 mm by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia medium grade pipe for protection ofGI wire to the extent of 7.5 mtrs as earthing lead, 40 mm dia light grade GI pipe for watering including charcoal dust and salt packed all around the earth plate in the earth pit all as per Electrical plate No 3 of SSR part - I (2009) including necessary excavation earth work in any type of treta completelyPCC foundation/chamber in mix 1:2:4 type B1 with angle iron frameCI frame, CI cover with provision of locking arrangement and 20 mm dia light grade GI pipe from top edge of the earth plate upto MS funnel with wire mesh provided inside the concrete earth pit for watering arrangement complete including excavation and earthwork in any type of strata and testing complete including fill up the earth pit with soil for best result and removal. Note :- Earth protection pipe & earthing wire upto and including 7.5 m length is deemed included in unit rate quoted by the contractor. |
| 132 | Schedule of credit amount of Rs. Nilto be deducted during AOC |
