Construction Of Multipurpose Hall At Khisherak Padum Zanskar.
Tender Value
60 Lakhs
Estimated cost
Bid Submission
04 Jul 2022
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
zanskar → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Multipurpose Hall At Khisherak Padum Zanskar.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches forfoundation ,drains, pipes, cables etc. (not exceeding 1,5 mtr in width) and for shafts,wells,cesspits and the like not exceeding 10 sqm onplan, depth upto 1.5mtr including disposal of excavated earth upto 1Mtr from cutting edge, disposed earthto be leveled and neatly dressed in All kinds of soil. |
| 2 | Earth work in excavation by manual means in trenches forfoundation ,drains, pipes, cables etc. (not exceeding 1,5 mtr in width) and for shafts,wells,cesspits and the like not exceeding 10 sqm onplan, depth upto 1.5mtr including disposal of excavated earth upto 1Mtr from cutting edge, disposed earthto be leveled and neatly dressed in AOrdinary rock. |
| 3 | Dry random rubble masonry in foundation and plinth using Nallah stone with bond stone. .including all carraige from source to site of work 20 km by M.T and 100 Mtr by Head Load Complete. |
| 4 | Dry Stone Pitching/solling stone hand packed including cost of stone, .including all carraige from source to site of work 20 km by M.T and 100 Mtr by Head Load Complete. |
| 5 | Providing and laying in position cement concrete of specifiedgrade includingthe cost ofcentering and shuttering . All work upto plinth level1:4:8 ( 1 cement: 4 coarse sand: 8 gradedstoneaggregate 40mm nominal size) Nallah.including all carraige from source to site of work sand/bajree 20 km and cement 2kmby M.T and 100 Mtr by Head Load Complete. |
| 6 | Random rubble masonry with hard stone from Nallah in foundation and plinth including leveling with cement concrete 1:6:12 ( 1: cement: 6 coarse sand : 12 graded stone agg, 20mm nominal size. )at plinth level with cement mortar 1:6, 1 cement: 6 Coursesand.including all carraige from source to site of work 20 km by M.T and 100 Mtr by Head Load Complete. |
| 7 | Reinforced cement concrete work in walls (any thickness) incld attached pilasters, buttresses, plinth and string courses, fillets, columns pillars, piers, abutments, posts and struts etc upto floor five level including cost of centring, shuttering, finishing and reinforcement 1:2:4 (1cement : 2corase sand : 4graded crushed stone agg. 20mm nominal size), including all carraige from source to site of work sand/bajree 20 km and cement 2kmby M.T and 100 Mtr by Head Load Complete. |
| 8 | Reinforcement for RCC work including straightening, bending, cutting, placing in position and binding all complete.Hot rolled deformed bars. Including all carraige from avilable source to site of work complete. |
| 9 | Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position with cement motor 1:3(cement: 3 course sand) includingcost of required centering shuttering and finishing smooth with 6mm thick cement plaster 1:3(1cement:3 finesand) on exposed surface complete 1:3:6(1cement:3 coarse sand :6 graded stone agg, 20mm nominal size including all carraige from source to site of work sand/bajree 20 km and cement 2kmby M.T and 100 Mtr by Head Load Complete. |
| 10 | Cement concrete flooring 1:2:4(1 cement :2 courses and4:graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc.complete.50mm thick with 20mm nominal size stonea ggregate.including all carraige from source to site of work sand/bajree 20 km and cement 2kmby M.T and 100 Mtr by Head Load Complete. |
| 11 | Providing wood work in frames,Shutter of doors,Windowswindows clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia complete 2nd class kail wood. |
| 12 | Providing and fixing paneled or paneled and glazed shutters for doors windows and clerestory windows including ISI marked black enameled M.S butt Hinges with necessary screws exclude paneling which will be paid for separately1st class kail wood for 35mm thick. |
| 13 | Providing and fixing ornamentalShingstak (Tukulpakchay) ladakhi wood carving over main entrance door/windows of ist class kail wood including glossy polish in sequence complete. (Design as per direction of Engineer- in-charge. |
| 14 | Providing wood work in frames of false ceiling, partition etc sawn and put up in position, 1st classkail wood. |
| 15 | Providing & fixing 8mm thick commercial ply wood ceiling includingIst Class Kail wood cornice and nails complete |
| 16 | Providing/ fixing 32mm thickplanks for flooringof ist class bodloo woodincluding nail etc.complete. |
| 17 | Providing and fixing soil, waste and vent pipes :Sand cast iron S&S pipe as per IS: 1729 100mm dia complete. |
| 18 | Providing and fixing soil, waste and vent pipes Sand cast iron S&S pipe as per IS: 1729 75mm dia |
| 19 | Providing and fixing plain bend of required degree:Sand cast iron S&S as per IS: 1729 100mm dia. |
| 20 | Providing and fixing plain bend of required degree:dia,Sand cast iron S&S as per IS: 1729 ,75mm dia. |
| 21 | Providing and fixing Polyethelene-Aiuminium-Polyethelene (PE-AL-PE) Composite Pressure Pipes conforming to IS:15450 U.V. stablised with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80°C including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) eg. Elbows, tees, reducers, couplers and connectors etc. with clamps at one metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the Engineer-in-charge. (Concealed work including cutting chases and making good the wall etc.),1216 (16mm 00) pipe |
| 22 | Providing and fixing ball valve (brass) of approved quality complete |
| 23 | Providing and fixing C.P. brass angle valve for basin mixer and gyser points _of approved make conforming to IS : 8931 |
| 24 | Providing and fixing brass bib cock of approved qual1ty. |
| 25 | Providing and fixing PVC Connector of approved qual1ty complete. |
| 26 | Providing hoisting and fixing trusses/ purlines rafters/ posts post plates or like componentsof Papular woodincludingcostofscrewetc complete |
| 27 | Providing corrugated G.S. sheet roofing fixed with polymer coatedJ or L hooks, bolts & nuts 8mm diameter with bitumen& G.I. limpet washers or with white lead and incld. a coatof approved steel primer and two coats of approved paint on over lapping of sheets complete (upto a pitch of 60 degrees), excld. the cost of purlins, rafters & trusses 0.63mm thick with zinc coating not less than 275gm/sqm. |
| 28 | Providing and fixing plained eaves boarding of ist class Kail wood (300x40) mm nominal size including .nail complete. |
| 29 | Providing and fixing whether boarding of 20mm thick 2nd class kail wood( pained on one side ) overlap 20mm minimum, complete incld. nail etc |
| 30 | Providing and fixing of ordinary glass sheet 3.5mmthickincluding beading and nail complete. |
| 31 | 20mm thick cement plaster finisfed with a floating coat of neat cement of mix of 1:4(1cement : 4fine sand),including all carraige from source to site of work sand/bajree 20 km and cement 2kmby M.T and 100 Mtr by Head Load Complete. |
| 32 | Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete. |
| 33 | Distempering with oilwashable distemper of approved brand and manufacture to give an even shade new work (two or more coats) over and incld. ing coat with cement primer. |
| 34 | Applying priming coatpriming with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 35 | Painting with synthetic enamel paintof approved brand and manufacture to give an even shade two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand manufacture. |
| 36 | Varnishing with varnish of approved brand and manufacture:Two or more coats of glue sizing with cop al varnish over and under coat of flatting varnish |
| 37 | Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3per sqm including pointing in white cement mixed with pigment of matching shade complete |
| 38 | Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) \"manually contro(led device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.Long pan pattern white vitreous china W.C. pan of size 580 mm. |
| 39 | Providing c;1nd fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps . |
| 40 | Providing and fixing all electric accessories with approved standard wires and accessaris complete job. Light Point with holder (Anchor) |
| 41 | CFL Tube (Syska) |
| 42 | Socket-32A(Anchor) |
| 43 | Socket-16A(Anchor) |
| 44 | SS Combine |
| 45 | Indacator (Anchor) |
| 46 | PVC Channal |
| 47 | Control Board (MCB+DP) |
| 48 | Service Line |
| 49 | Providing and fixing of Hardwire items for Doors,Windows,Kitchen etc. Handle 150mm long. |
| 50 | Handle 75mm Long. |
| 51 | Aldraps Aluminum 200 mm Long |
| 52 | Aldraps Aluminum150 mm Long |
| 53 | Hings 100 mm |
| 54 | Hings 75 mm |
| 55 | Latch Locks |
| 56 | Hydrolic door spring of aluminum |
| 57 | Door Stopper Small |
| 58 | Sink Mixer |
| 59 | Sink assembly |
| 60 | Providing and fixing of AngleSing Board (4\"x3\") including writing Priming /Paintingwelding charge and all carriage of materials complete job. Design as per the instruction of in charge engineer. |
AI Tender Summary
Tender Timeline
Jun 27, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJul 04, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 05, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender