Rural Works Department has published special repair To Ps Road To Kurebhana Road Such As Pot Hole Repire Berm Cleaning Rain Cut Filling At Ch 0/00 To 3/160 Km For The Year 2022-23. Submission Date for this Tender is 20-07-2022. Road Work Tenders in balangir Odisha. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 29-Jun-2022 | 4th corrigendum | Date | 20-07-2022 |
| Sl. No. | Item Description |
| 1 | Cleaning the existing granular base surface including removal of binding materials and other foreign materials with wire brushes and small picks, sweeping with brooms or soft brushes and finally dusting with old gunny bags and/or compressed air to receive bituminous treatment.(AR-2006, P No. 146) |
| 2 | Earth work in hard soil |
| 3 | Earth work in hard soil or gravelly soil within 50m.initial lead and 1.5m. initial lift including roughdressing and breaking clods to maximum 5Cm. to7C.m.,and laying in layers to exceeding 0.3m., indepth and as per direction of the department (AR-2006, P NO - 02) |
| 4 | Wall painting 2 coats with plastic emulsion paint of approved shade on new work to give an even shade excluding cost of paint & conveyance of all material, royalty and taxes of all materials, cost of labour, T&P required for the work etc. complete as per direction of the Engineer-in-Charge (AR-2006,P No.99). |
| 5 | Labour for laying 20mm thick premix carpet using 0.27cum of 13.2mm to 5.6mm crusher stone chipping and 14.60kg. penetration grade of bitumen for 10sqm including hand packing to proper camber and consolidation with PRR inclusive of hire and running charges of PRR , bitumen mixtures, tar boilers and all other T & P articles excluding / including cost and conveyance of chips and bitumen complete as per specification and direction of the Engineer-in- charge(AR-2006, P No. 147) |
| 6 | Labour for laying 6mm thick precoated seal coat Type-B using 0.06 cum of 6.7mm size chips as per sieve analysis and 6.8Kg of bitumen per 10sqm.including hire and running charges of PRR, hot mix plant, tar boiler and all other T&P articles including/ excluding cost and conveyance of chips and bitumenA/R P No-149 |
| 7 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness.( AR-2006,P- 196) |
| 8 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thicknessi) In area of light jungle(AR-2006,P No-196). |
| 9 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density as per Clause 404 of MoSRT&H Specifications for Road & Bridge works (4th Revision) A/R P No-162 |
| 10 | (C) Grading-III - Using stone screened dust AR 2006 P No 165 |
| 11 | Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom as per Clause 503 of MoSRT&H Specifications for Road & Bridge works (4th Revision) A/R P No-168 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
