}

Provn Of Hardstanding With Paver Block For Veh Parking Near Helipad And Csd, Main Gate With Arch And Pillars , Three 400 Kva Gen Shed And Covered Shelter With Hardstanding For Mt Sec At Hq Uniform Force At Kiari Under Ge 860 Ews, kiari-Jammu And Kashmir

Military Engineer Services-MES has published Provn Of Hardstanding With Paver Block For Veh Parking Near Helipad And Csd, Main Gate With Arch And Pillars , Three 400 Kva Gen Shed And Covered Shelter With Hardstanding For Mt Sec At Hq Uniform Force At Kiari Under Ge 860 Ews. Submission Date for this Tender is 09-07-2022. Uniform Tenders in kiari Jammu And Kashmir. Bidders can get complete Tender details and download the document.




Tender Notice

32834607
Corrigendum : Provn Of Hardstanding With Paver Block For Veh Parking Near Helipad And Csd, Main Gate With Arch And Pillars , Three 400 Kva Gen Shed And Covered Shelter With Hardstanding For Mt Sec At Hq Uniform Force At Kiari Under Ge 860 Ews
Open Tender
Indian
Jammu And Kashmir
kiari
09-07-2022

Tender Details

Provn Of Hardstanding With Paver Block For Veh Parking Near Helipad And Csd, Main Gate With Arch And Pillars , Three 400 Kva Gen Shed And Covered Shelter With Hardstanding For Mt Sec At Hq Uniform Force At Kiari Under Ge 860 Ews

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 02-Jul-2022 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 09-07-2022

Key Value

Document Fees
INR 500 /-
EMD
INR 88700.0 /-
Tender Value
INR 44.35 Lakhs /-

BOQ Items

Name of Work:PROVN OF HARDSTANDING WITHPAVER BLOCK FOR VEH PARKING NEAR HELIPAD AND CSD, MAIN GATE WITH ARCH AND PILLARS , THREE 400 KVA GEN SHED AND COVERED SHELTER WITH HARDSTANDING FOR MT SEC AT HQ UNIFORM FORCE AT KIARI UNDER GE 860 EWS
Sl. No. Item Description
1Surface dressing n. exc 15cm deep in hard/dense soil complete all as specified.
2M&L forHardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick,wateredand rammed to a true surface complete all as specified & directed.
3M & L plinth protection 75 mm thick inPCC 1:3:6 type C-1 ( using 20 mm graded crushed stone aggregate ) laid in alternate bays (not exceeding 2 Sqm each) finished even and smooth at top without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight all as directed at site.
4M& L for cement concrete 100mm thick 1:4:8 type D-2 using 40mm graded crushed stone aggregate over rammed earth as in sub base to receive floor finish etc complete all as specified.
5M& L for cement concrete 150mm thick 1:4:8 type D-2 using 40mm graded crushed stone aggregate over rammed earth as in sub base to receive floor finish etc complete all as specified.
6M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified.
7M&L for Machine pressed precast concrete interlocking paver block any shape & size confirming to IS 15658-2006 of 80 mm thickness M-40 grade with grey cement and pigment complete all as specified.
8M & L for Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges type B1 1:2:4 (20mm graded crushed stone aggregate) complete all as specified.
9Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m depth and n.exc 10 Sqm on plan and getting out in any kind of soil complete all as specified and directed.
10M&L for PCC 1:4:8 type D2 (Nominal mix) using 40mm graded crushed stone aggregate as in foundation filling and similar work complete all as specified.
11M&L Precast cement concrete block masonry type C1 1:3:6 (20mm graded crushed stone aggregate) with solid blocks, exc 10 cm in width and setting in cement mortar 1:6 complete all as specified.
12Returning filling in incl spreading, watering and well ramming in layer n.exc 25 cm in layers complete all as specified.
13Removing excavated material to a distance n.exc 50m and depositing where directed at a level n.exc 1.50 m above the starting point complete all as specified.
14M&L for rendering 15mm thick, in cement mortar 1:4 on PCC block walling or concrete surfaces and finished even and fair without using extra cement complete.
15M&L for two coats of cement base paint over a coat of white wash on walls after preparation of new-plastered surface complete, all as specified and directed.
16M&L for reinforced cement concrete M-30 (Design Mix) using 20mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.
17M&L for reinforced cement concrete M-30 (Design Mix) using 20mm graded crushed stone aggregateas in Columns, pillars, piers, posts and struts complete all as specified and as directed.
18M&L form work to sides of concrete foundations, footings, bases of columns raft and beams sides and soffits(if any) of foundations and plinth,beams and similar work,vertical or to batter,for rough finished flat surfaces of concrete complete all as specified and as directed.
19M&L form work to sides of pillars, posts, struts, piers, columns and stanchions, for square, rectangular or poygonal, rough finished surfaces of concrete complete all as specified and as directed.
20M &L mild steel TMT bars 10mmdia and over cut to length, bent to shape required, including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire(annealed ) not less than 0.9mm dia or securing with clip complete all as specified and as directed.
21M&L mild steel TMT bars 5mm and over upto 10mmdia in stirrups, spacers and binders cut to length, bent to shape required, including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire(annealed ) not less than 0.9mm dia or securing with clip complete all as specified and as directed.
22M&L for coloured Glazed ceramic tiles in vertical surface 450X350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface including screed bed 10 mm thick in cement mortar 1:6all as specified and directed .
23S & F Mild steel flat iron of size 25 x 3mm as in hold fastconforming to Fe 410-O or Fe -310-O all as specified and directed .
24M&L for rendering 10 mm thick, in cement mortar 1:6 on PCC block walling or concrete surfaces and finished even and smooth without using extra cement complete all as specified.
25Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces
26S & F Steel gate ornamental with cladding Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work (conforming to Fe.290.Gde-E-165) complete all as specified and as directed by Engr-in-charge.
27S & F stainless steel letters of grade 304 bright polished , 450 mm height, 32 mm width and 32mm depth made out of 0.63 mm thick stainless steel sheet with seamless welding , rubbed , polished and edges made smooth including necessary fixing arrangement complete all as specified and as directed by Engr-in-charge.
28Excavation in post holes (or similar holes) each not exceeding 0.5 cum in hard/dense soil getting out, returning filling and ramming earth or broken rubbles mixed with earth around in layers not exceeding 25 cm watering and removing surplus soil to distance not exceeding 50 metre and making good surface complete all as specified and directed.
29M&L for rendering 15 mm thick, in cement mortar 1:6 on PCC block walling or concrete surfaces and finished even and smooth without using extra cement complete all as specified.
30M&L for PCC (1:3:6) type C1 using 20 mm graded crushed stone aggregateas in coping including necessary form work complete all as specified and directed.
31M&L for cement concrete 75mm thick 1:4:8 type D-2 (using 40mm graded crushed stone aggregate)over rammed earth as in sub base to receive floor finish etc complete all as specified.
32M&L for 40mm thick Cement concrete type B-1, 1:2:4 (using 20mm graded crushed stone aggregate) as top layer finishing cement concrete surface even and smooth using extra cement as specified and directed.
33M &L Cement Concrete Type-B1 (1:2:4) (using 20mm graded crushed stone aggregate) in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed.
34S&F steel work in tubular trusses including special shaped washer etc complete using ERW or indication but welded tubes conforming to IS 116-1979 grade St -240 and including steel is painted one shop coat of zinc chromate primer paint complete all as specified and as directed by Engr-in-Charge.
35S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified.
36S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in ridge of roof covering/cladding to wall fixed with self-tapping screws complete all as specified.
37S&F FI 40 x 6 mm thick as in fixing of Roof sheet as wind tie including securing bolts all as specified and directed.
38M&L for two coat of synthetic enamel paint over a coat of priming with red oxide, zinc chrome of new or previously untreated surfaces of steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described complete all as specified and directed by Engr in Charge.
39Supply and laying XLPE insulated armoured heavy duty electric cable with aluminium conductor (Stranded) 1100V grade cross-sectional area 10 Sqmm 2core laid in trenches or passing through pipe or fixed on pole etc complete all as specified and directed by Engr-in-Charge
40M&L for un-reinforcedpre-cast concrete cable covers, class LV type-1, flat size 250mm x 150mm x 40 mm thick complete all as specified and directed by Engineer-in-Charge
41M&L for sand cushioning to under ground electric cablecomplete all as specified and directed by Engineer-in-Charge
42M&L point wiring complete for one light / bell / fan point controlled by one no, 1-way, 5 Amps switch. with single core FRLS PVC insulated, unsheathed, multi stranded copper conductor cables 1.5 Sqmm 1100 volts grade, with and incl 1.5 Sqmm FRLS PVC insulated, unsheathed, multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, complete wiring drawn through & PVC casingand cappingof 25 mm and above (as per conductor run ) medium grade, ISI marked, incl all accessories & fittings / junction boxes / inspection covers etc, with and incl concealed MS sunken box of suitable size flush with wall surface, covered with & incl 3 mm thick bakelite, laminated hylem sheet / Gang box for top cover suitable for fixing of piano type switches / sockets etc, complete all as specified and directed for the following :-(Note :The cost of MS sunken box with 3 mm thickbakelite, laminated hylem sheet top cover is deemed to be included in quoted rate.)
43All as per Srl item no. 42 here-in-before but one 3 Pin socket outlet, 5 Amp on independent board
44All as per Srl item no. 42 here-in-before but one 3 Pin socket outlet, 5 Amp on same board.
45All as per serial item No. 42 here-in-before, but for one socket outlet 15 Amps on independent board with 2.5 Sqmm FRLS PVC copper conductor (Multi-stranded) insulated and unsheathed electric cable 1100 volts (ISI Marked) including FRLS PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common dolly.
46S&F switch piano flush button single pole one way 5 Amps complete all as specified and directed by Engineer-in-Charge
47S&F in replacement of socket, two-in-one, 5 pin, 5 Amp, universal type, 230 volts, completeall as specified and directed by Engineer-in-Charge
48Supply and fixing switch socket combination multi purpose 2 in 1, 3 pin 5 Amp and 15 Amp, flush type complete all as specified and as directed by Engr-in-charge.
49Supply and fixing LED lights with complete fitting 1x 20/22W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified.
50S&Flamp holder, PVC/Polycaronate type with back plate complete all as specified and directed by Engineer-in-Charge
51S&F LED bulb 10 Wattcomplete all as specified and directed by Engineer-in-Charge
52S&F LED bulb 12 Wattcomplete all as specified and directed by Engineer-in-Charge
53Supply and fixing ceiling rose, surface bakelite, 65 x 50 mm, three terminals complete all specified and as directed by the Engineer-in-Charge.
54S&F in replacement of Distribution Board, double Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, SPN 04 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof, suitable for incorporation of MCB’s and isolators etc and making all necessary connections, duly flush of wall surface, complete all as specified and directed.
55S&F MCB single pole and neutral 35 to 60 Amps, 240 Volt, C curve 10 KA complete all as specified and directed by Engineer-in-Charge
56S&F MCB single pole 5 to 30 Amps, 240 Volt, C curve 10 KA complete all as specified and directed by Engineer-in-Charge
57S & F new energy saving bulk head fitting 12 watt made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance of IK 07 as required to be mounting bracket in wall/floor to suit the opening of the fitting with FI clamp, nut, bolt and washer of suitable size including making connection complete all as specified and directed by Engineer-in-Charge
58Supply and fixing CUB LED Flood light luminaire with high presure dia cast housing acting as heat sink complete with all accessories incl two run of 1.5 Sqmm Copper conductor cable from street light to junction box/OH conductor/Switch board/MCB fitting complete of 90W LED including required modification for fixing the same in existing bracket/GI light grade pipe etc all as specified and directed by Engineer in charge.
59Earthing complete withgalvanized steel earth plate electrode 60 cmx 60 cm x 6 mm thick buried directlyin ground (earth pit notless than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level,connecting to theGalvanized ironearth wire 4.0 mm dia by means of bolts, nuts , check nuts and washers of galvanized iron andsteelearth wire protected by provision of GI lightgrade pipe15 mmbore including provision of concrete pitmade from PCC ( 1:2:4) type B-1 (using20 mm graded stone aggregate) with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4 Kg/Sqm) and frame of angleiron40 x 40 x 6 mm and handle of 6 mmdia MS barmade to shape, GI light grade 20 mmbore pipefor watering perforated atbottom, 1.50metre long placed on top edge of earth plate, common salt &charcoalfilling, withfixing arrangement , funnel, wire mesh and earthwork in hard/dense soil, returning filling in and removal of surplus soilto a distance notexceeding50 metres, all as perelectrical plateNo 3 of SSR 2009 Part-I and connecting toMCBDB’searth test point all as specified or indicated including testing on completion .
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail