Military Engineer Services-MES has published Comprehensive Maint Of Electrical Fittings And Fixtures For Airmen Mess, Snco Mess, Officer Mess, Billets And Phase I, Phase Ii, Phase Iii And Dgca, Sinha Colony And Tech Area And Repair / Replacement Of Summer And Cooling Appliances Fan And Geysers. Submission Date for this Tender is 27-07-2022. Electrification Work Tenders in bagdogra West Bengal. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 06-Jul-2022 | Date Corrigendum | Date | 20-07-2022 |
| 2 | 20-Jul-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 27-07-2022 |
| Sl. No. | Item Description |
| 1 | Taking down carefully copper/aluminium point wiring complete (light, fan, plug point & power complete alongwith fittings (switches, ceiling roses, tube light fittings, bulk head fitting regulator, sockets ,removing materials to store and offering credit & making good of disturb surfaces of wall/floors etc as specified & directed. |
| 2 | M& L for Point wiring with 1.5 Sqmm(22/0.30mm) PVC insulated andunsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FRLS type drawn through and including PVC concealed conduit (ISI marked) of adequate size and its accessories with sunk cast iron/pressed steel terminal boxes of size 1.6mm thick, with 3mm thickplastic laminated sheet cover of adequate size for one light or one fan point controlled by one switch incl 1.5 Sqmm (nominalarea) copper conductor cable (multistrand), FRLS type, PVC insulated and unsheathed with colour code earth wire connected to common earth dolly at one end and metallic bodies of luminaries/ fan at other end complete as per site requirement and all as specified & directed by Engr-in-Charge for the following:- (a)One light point or one fan point controlled by one switch with cables 1.5 sq. mm size Note:-Unit rate include for cutting chases for conduits and sinking for boxes andmaking good to wall, floors etc. |
| 3 | All as per ser item No. 2 above here in before but for One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire as specified. |
| 4 | All as per ser item No. 2 here in before but for One 5 Amp 5 pin socket outlet point on independent board. |
| 5 | All as per ser item No. 2 here in before but with 4.0 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 5 pin socket outlet point including PVC cable 4 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to common earth & earth terminals including boards for mounting purposes. |
| 6 | All as per ser item No. 2 here in before but one light point controlled by 2 way switches. |
| 7 | All as per ser item No. 2 here in before but one bell/buzzer point controlled by one push button on the same board with other switches or independent. |
| 8 | M&L for point wiring with 1.5 Sqmm(22/0.30mm) PVC insulated andunsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FR type drawn through and including PVC casing capping/ PVC Conduit(ISI marked) and its accessories such as Tee, elbow, jointer, elbow corner etc. fixed on surface of walls, columns/ beams alongwith 1.5 Sqmm (nominalarea) copper conductor cable (multistranded) PVC insulated and unsheathed as earth wire connected to common earth dolly at one end and metallic bodies of luminaries/ fan at other end including PVC folding boardswith sunmica top for mounting switches, sockets, fan Regulators, accessories etc as per site requirement and all as specified & directed by Engr-in-Charge for the following:- (a)One light point or one fan point controlled by one switch with cables 1.5 sq. mm size. |
| 9 | All as per ser item No. 8 above here in before but for One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire as specified. |
| 10 | All as per ser item No. 8 here in before but for One 5 Amp 5 pin socket outlet point on independent board. |
| 11 | All as per ser item No. 8 here in before but with 4.0 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 5 pin socket outlet point including PVC cable 4 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to common earth & earth terminals including boards for mounting purposes. |
| 12 | All as per ser item No. 8 above here in before but one bell/buzzer point controlled by one push button on the same board with other switches or independent. |
| 13 | All as per ser item No. 8 here in before but one light point controlled by 2 way switches. |
| 14 | Supply and Fixing bell push, flush type, 5 Amp single pole, 230 volts white finish all as specified & directed. |
| 15 | Supply and fixing switch piano flush button 5 Amp single pole 2 way 230 volts white finish all as specified & directed. |
| 16 | Supply and fixing in replacement switch piano flush button 5 Amp single pole one way 230 volts white finish all as specified & directed. |
| 17 | Supply and fixing in replacement of socket outlet flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish all as specified & directed. |
| 18 | Supply and fixing in replacement switch socket combination flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish. |
| 19 | Supply and fixing in replacement of switch socket combination multipurpose flush type 2 in 1 type (3 and 5 pin) 5/15 Amps, 230V, AC. |
| 20 | Supply and fixing in replacement ceiling rose surface PVC 50mm dia 3 terminals including PVC mounting block white/ivory finish. |
| 21 | Supply and fixing in replacement surface and wall mounted LED batten 20 watt - 4Ft White with Aluminum housing & integrated electronic driver, high performance batten and efficacy should not less than100 lumen/watt and all as specified and directed. |
| 22 | Supply and fixing in replacement surface and wall mounted LED batten 10 watt - 2Ft White with Aluminum housing & integrated electronic driver, high performance batten and efficacy should not less than 100 lumen/watt and all as specified and directed. |
| 23 | Supply & fixing in replacement LED light fitting 1x9W/ 1X10W bulkhead luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size as per site requirement and all as specified and directed. |
| 24 | Supply and fixing in replacement energy efficient Street/ Roadway/Building Security Luminaries LED fitting upto 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete, including brackets and all accessories needed to fixed to the wall or pole all as per site requirement and as specified and directed. |
| 25 | Supply and Fixing in replacement Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fitting complete. |
| 26 | Supply & fixing in replacement stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqdall as specified and directed of approved make. |
| 27 | Supply & fixing in replacement exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete as per site requirement and all as specified and directed of approved make. |
| 28 | Taking down carefully copper/aluminium sub main wiring completealongwith all connected accessories etc as specified & directed. |
| 29 | Supply and fixing submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 6 Sqmm drawn through in and including rigid PVC heavy duty concealed conduits including 6 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note:- (i)Two runs of cables and one run of continuous earting cable drawn in conduit will be measured as one length of sub main. (ii)PVC conduit and its accessories is deem to be included in this item rates. (iii) Unit rate include for cutting chases for conduits and sinking for boxes andmaking good to wall, floors etc. |
| 30 | Supply and fixing submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 10 Sqmm drawn through in and including rigid PVC heavy duty concealed conduits including 10 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note:- (i)Four runs of cables and two run of continuous earting cable drawn in conduit will be measured as one length of sub main. (ii)PVC conduit and its accessories is deem to be included in this item rates. (iii) Unit rate include for cutting chases for conduits and sinking for boxes andmaking good to wall, floors etc. |
| 31 | Supply and fixing submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 6 Sqmm drawn through in and including rigid PVC heavy duty PVC casing capping upto 32mm or PVC conduit upto 25mm on wall surface/ recessed as required at site including 6 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note:- (i)Two runs of cables and one run of continuous earting cable drawn in conduit/ casing and capping will be measured as one length of sub main. (ii)PVC conduit / casing capping and its accessories is deem to be included in this item rates. |
| 32 | Supply and fixing submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 4 Sqmm drawn through in and including rigid PVC heavy duty PVC casing capping upto 32mm or PVC conduit upto 25mm on wall surface/ recessed as required at site including 4 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note:- (i)Two runs of cables and one run of continuous earting cable drawn in conduit/ casing and capping will be measured as one length of sub main. (ii)PVC conduit / casing capping and its accessories is deem to be included in this item rates. |
| 33 | Taking down carefully DB/ Sheet Metal Enclosure with existing MCBs complete& making good of disturb surfaces of wall/floors etc as specified & directed. |
| 34 | Supply and fixing distribution board sheet metal enclosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB"s 415 volts, 200 Amp rated bus bar with front openable cover suitable for TP & N 4 ways all as specified & directed. |
| 35 | Supply and fixing distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB"s 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 4 ways all as specified & directed. |
| 36 | Supply and fixing distribution board sheet metal enclosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB"s 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 8 ways all as specified & directed. |
| 37 | Supply and fixing sheet metal enclosure (factory made), VTPN Vertical Distribution Boards, IP-43 & IP-44 protection suitable for MCCB"s upto 125A as as incomer, Double Door, 8 way with 250 Amps rated copper busbar all as specified and directed of make as approved. |
| 38 | Supply and fixing sheet metal enclosure (factory made), VTPN Vertical Distribution Boards, IP43 protection suitable for MCCB"s upto 125A asincomer, Double Door, 4 way with 250 Amps rated copper busbar all as specified and directed of make as approved. |
| 39 | Supply and fixing sheet metal enclosures with plug socket single pole and neutral with two pin and earth plug and with one MCB of 20 Amps (SP) complete all as specified. |
| 40 | Supply and Fixing in replacement of MCB SP 6-32 Amps/ 40 Amps, 230 Volts, 50 Hz with 10 KA,"C" series all as specified & directed by Engineer-in-charge. |
| 41 | Supply and Fixing in replacement of MCB SPN/DP upto 32 Amps, 230 Volts, 50 Hz with 10 KA,"C" series all as specified & directed by Engineer-in-charge. |
| 42 | Supply and Fixing in replacement of MCB TPNupto 32 Amps, 230 Volts, 50 Hz with 10 KA ,"C" series all as specified & directed by Engineer-in-charge. |
| 43 | Supply and Fixing in replacement of MCB TPNupto 40 to 63 Amps, 230 Volts, 50 Hz with 10 KA ,"C" series all as specified & directed by Engineer-in-charge. |
| 44 | Supply and fixing Slim design LED recessed round/Square down lighter 12watt polycarbonate housingwith superior light output and integral driver and Efficacy not less than100lm/w suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete as per site requirement and as directed. |
| 45 | Supply and Fixing in replacement LED panel light 18 watt efficient LED recessed luminaries 1 ft x 1 ft (>100 Lumen/Watt) to enhance the delight of occupants with comfortable experience through its classic design & glare free soft illumination for armstrong/ grid ceiling or similar ceiling mounting system with concealed complete prewired complete as per site requirement and all as specified and directed. Note : Rate for removing of existing unserviceable old luminaries is deem to be included in this item rates. |
| 46 | Supply and Fixing in replacement LED panel light 36 watt efficient LED recessed luminaries 2 ft x 2 ft (>100 Lumen/Watt) to enhance the delight of occupants with comfortable experience through its classic design & glare free soft illumination for armstrong/ grid ceiling or similar ceiling mounting system with concealed complete prewired complete as per site requirement and all as specified and directed. Note : Rate for removing of existing unserviceable old luminaries is deem to be included in this item rates. |
| 47 | Supply and fixing Round/Square surface mounted LED panel 6 Watts, PDC aluminum housing and high translucent frosted plastic diffuser makes it a robust Luminaries, Efficacy not less than100lm/w, suitable for fixing at roof/ceiling including connecting up with three core flexible copper conductor cable of suitable size complete as per site requirement and as directed. |
| 48 | Supply and fixing Round/Square surface mounted LED panel 12 Watts, PDC aluminum housing and high translucent frosted plastic diffuser makes it a robust Luminaries, Efficacy not less than100lm/w, suitable for fixing at roof/ceiling including connecting up with three core flexible copper conductor cable of suitable size complete as per site requirement and as directed. |
| 49 | S&F in replacement of Post top, 30W LED lamp, LED post top Lantern E-Top with low glare optical design acrylic diffuser wired with all accessories, 240V, including connecting up with three core flexible copper conductor cable of suitable size complete as per site requirement and as directed. |
| 50 | Supply and fix in replacement of MCCB 125 Amp, TP/TPN/FP, 415 volts with rupturing capacity 16KA as per site requirement complete all as specified and directed. |
| 51 | Supply and Fixing in replacement of RCCB DP 30mA, 230 Volts, 50 Hz of capacity upto 40 Ampas per site requirement and as directed. |
| 52 | Material & Labour in replacement of Earthing complete withgalvanised steel earth plate electrode 60cmx60cmx6 mm thickness burried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to and incl galvanised earth lead wire of 4.00mm dia by means of nuts & bolts, check nuts and washers of galvanised incl PCC pit of 1:2:4 type B-1, cover reinforced with XPMweightnot less than 4 Kg/Sqm and 6mm dia bar handle, earth pit angle iron frame of size 25mm x 25mm,excavation and earth work in anytype of soil, charcoal dust, salt, light grade GI watering pipe 20mm dia with funnel and wire -mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distribution board complete allto as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected main switch board all as specified and testing on completion. |
| 53 | Supply & Fixingin replacement of modular type fan regulator,AC 230 Volts. |
| 54 | Supply & Fixing in replacement of switch modular type 6 Amps one wayAC 230 Volts. |
| 55 | Supply & Fixing in replacement of switch modular type 16 Amps one wayAC 230 Volts. |
| 56 | Supply & Fixing in replacement of modular type bell push 6 Amps,AC 230 Volts. |
| 57 | Supply & Fixing in replacement of modular type socket 6 Amps 2/3 pin combined,AC 230 Volts. |
| 58 | Supply & Fixing in replacement of modular type socket 6/16 Amps 2/3 pin combined,AC 230 Volts. |
| 59 | Supply & Fixing in replacement ofmodular white cover plate with frame, 2 module. |
| 60 | Supply & Fixing in replacement of modular white cover plate with frame, 4 module. |
| 61 | Supply & Fixing in replacement ofmodular white cover plate with frame, 8 module. |
| 62 | M&L in replacement of submain wiringPVC insulated FRLS single core with stranded copper cable of size 6 Sqmm in 2 runs and 6 Sqmm one run for earth drawing through existing surface, casing/capping, recessed steel/PVC conduct complete as per site requirement and all as directed. (Note:- Two runs of main cable and one run of earth cable all-toghter shall be considered as one length). |
| 63 | M&L in replacement of submain wiring PVC insulated FRLS single core with stranded copper cable of size 4 Sqmm in 2 runs and 4 Sqmm one run for earth drawing through existing surface, casing/capping, recessed steel/PVC conduct complete as per site requirement and all as directed. (Note:- Two runs of main cable and one run of earth cable all-toghter shall be considered as one length). |
| 64 | Replacement of plastic laminated sheet top cover 3mm thick of approx size 4" x 4" or6" x 4"as per site requirement and fitted with MS galvanised screws and cup washerin repairs including cutting of sheet and shifting of all fixtures from the old switch board and connection complete, all as specified and directed by Engr-in-charge. (Make :- Anchor/ Hylum/Mayur). |
| 65 | All as per item No 64 here in before but for plastic laminated sheet top cover 3mm thick of approx size8"x 5" or 9" x 7". (Make :- Anchor/ Hylum/Mayur). |
| 66 | All as per item No 64 here in before but for plastic laminated sheet top cover 3mm thick of approx size 11"x 9". (Make :- Anchor/ Hylum/Mayur). |
| 67 | Taking down hanging laminated sheet cover of any size and re-fixing the same in repairs by replacing rusted screws and cup washers etc., complete, all as directed. |
| 68 | Supply and fixing in repairs for Circular Hylam Sheet upto 10 Cm diaof 3 mm thick including brass machine screws of suitable size as per site requirement (for using as Junction box Cover) all as directed. |
| 69 | All as per item No 68 above here-in-before but for Circular Hylam Sheet of 15 Cm dia of 3 mm thick (for using at ceiling as Canopy Cover for ceiling fan) all as directed. |
| 70 | M&L for point wiring in repairs complete with multistranded copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable in but with through existing concealed PVC/MS conduit/Casing capping with replacement of unserviceable pressed steel terminal boxes of required size with top cover 3 mm thick plastic/laminated sheet of required colour with screwed and cup washer with all accessories including 1.5 sqmm stranded copper conductor PVC unsheathed cable earth wire to common earth and connected to earth dolly for One Fan/exhaust fan point controlled by one switch 5 Amps one way using cable 1.5 Sq mm for phase and neutral and 1.5 sqmm for earthing complete all as per site requirement and as directed. |
| 71 | All as per item No 70 above but One 3 pin 5/6 Amps, socket outlet point, independent board, for Wall/Cabin/Pedestal fan etc with cables 1.5 sq. mm size with through existing concealed PVC/MS conduit. |
| 72 | Repairs to hanging/old point wiring for light point/ceiling fan/exhaust fan etc on wall surface by replacing with heavy duty PVC casing capping upto 32mm or PVC conduit upto 25mm with all accessories with all accessories and including single core copper cable of suitable gauge in short lengths, MS boxes, sheet top covers, and fixed with cadmium platted steel screws, complete, all as specified and directed including testing and making full functional for that point after repair. (Note:- fitting and fixtures if replaced will be paid and measured separately). |
| 73 | Taking down, strip opening, cleaning all parts and packing of ceiling fan of any make and size and greasing ball bearing with specified quality grease and re-assembling theceiling fanas a one unit, complete all as specified. Note : Replacement of spare parts such as rewinding, painting, cable for connection etc., to be measured and paid separately under relevant items. |
| 74 | Hanging only ceiling fan in position after necessary repairs and re-commissioning the same including making electric connection complete all as specified and directed. |
| 75 | All as per srl No 73 here in before but of exhaust fan any make and any size complete all as specified and directed. |
| 76 | Hanging only exhaust fan in position after necessary repairs and re-commissioning the same including making electric connection complete all as specified and directed. |
| 77 | M&L for rewinding of ceiling fan of 1200 mm size complete with super enamelled insulated copper wire of suitable size/gauge and varnishing including oiling, greasing, and replacement of old unsv or weak capacitor of suitable capacity as per manufacturer and testing complete in MES store yard all as specified and directed. Note: The unserviceable winding wire shall be returned back to MES store and necessary RV to be obtained for same. |
| 78 | All as per item No. 77 above here-in-after but for ceiling fan of 1400mm sweep. |
| 79 | M&L for rewinding of exhaust fan of upto 350mm sweep with super enamelled insulated copper wire of suitable size/gauge and varnishing including oiling, greasing, and replacement of old unsv or weak capacitor of suitable capacity as per manufacturer and testing complete in MES store yard all as specified and directed. Note: The unserviceable winding wire shall be returned back to MES store and necessary RV to be obtained for same. |
| 80 | All as per item No. 79 above here-in-after but for Exhaust fan of 380mm to 450mm sweep complete all as specified and directed. |
| 81 | M&L for rewinding of Wall/Cabin/Pedestal fans of upto 350mm sweep with super enamelled insulated copper wire of suitable size/gauge and varnishing including oiling, greasing, and replacement of old unsv capacitor of suitable capacity as per manufacturer and testing complete in MES store yard all as specified and directed.Opening and refixing of fan motor and refixing the same after necessary repair/rewinding to be done at MES store yard within quoted rate by the contractor all as specified and directed. Note: The unserviceable winding wire shall be returned back to MES store and necessary RV to be obtained for same. |
| 82 | All as per item No. 81 above here-in-before but for Wall/Cabin/Pedestal fans of 400mm to 500mm sweep complete all as specified and directed. |
| 83 | M&L in replacement of defective shaft of ceiling fans including matching work for any make as per sample. |
| 84 | M&L in replacement of defective shaft of Exhaust fans including matching work for any make as per sample. |
| 85 | M&L in replacement of gun metal bush for fans of any make, type and size all as per sample approved. |
| 86 | M&L in replacement of ball bearing No. 6200/6201/6202 for ceiling/exhaust/Wall/Cabin/ Pedestal fans of any size and makes all as directed of sample as approved. (Make:- NBC/SKF/HCH) |
| 87 | All as per item No. 86 above here-in-before but of Nos. 6203/6204 for exhaust/Pedestal fans. |
| 88 | M&L for cleaning and de-scaling/greasing of exhaust fan and louvers with necessary cleaning materials and including painting with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc as specified and directed upto connecting complete. (Note:-Taking down and refixing of exhaust fan will be measured and paid separately.) |
| 89 | M&L in replacement of exhaust fan/Wall/Cabin/Pedestal fan blades heavy duty for exhaust fan of size upto 300mm sweep complete all as specified and directed. |
| 90 | All as per item No. 89 above here-in-before but for Exhaust fan of size 350mm to 400mm sweep. |
| 91 | All as per item No. 89 above here-in-before but for Exhaust fan of size 450mm sweep. |
| 92 | Supply & fixing in replacement ceiling fan blade set of three heavy duty suitable for 1200 mm sweep including provision of fixing of screws of suitable sizecomplete all as specified and directed. |
| 93 | All as per item No. 92 above here-in-before but for size of 1400mm sweep. |
| 94 | Supply & fixing in replacement of MS louvers suitable for exhaust fan of size upto 350mm sweep complete all as specified and directed. |
| 95 | All as per item No. 94 above here-in-before but for Exhaust fan of size above 350mm and upto 450mm sweep. |
| 96 | Supply and Fixing in replacement of PVC canopy for ceiling fan 1200/1400mm sweep for existing make and model complete all as directed and as approved by Engr-in-Charge. |
| 97 | Supply and fixing in replacement of rubber reel with nut, bolts, split pins etc of ceiling fan with rubber reel heavy duty for hanging fan. |
| 98 | Supply and fixing in replacement of Shackle assembly (hanging clamp set) suitable for hanging down rod of ceiling fan 1200/1400 mm sweep complete with nuts, bolts, washers and split pin complete all as specified and directed. |
| 99 | Supply and fixing in replacement of down rod with clamps etc of ceiling fan with down rod of 15mm bore medium grade GI pipe 0.30 metre long with clamps, bolts, nuts, split pins washers of suitable size of approved quality all as per specified and directed. |
| 100 | All as per item No. 99 above here-in-before but of size 0.45m long. |
| 101 | Supply and fixing in replacement of connector block of ceiling fan of suitable size of approved quality. |
| 102 | Supply and fixing in replacement of capacitor suitable for ceiling fans with capacitor having capacity 2.5mfd, 240 Volts. |
| 103 | All as per srl item No 102here-in-before but of capacity 3.15mfd. |
| 104 | All as per srl item No 102 here-in-before but of capacity 4mfd. |
| 105 | Supply and fixing PVC Round Sheathed, FR grade, Copper Conductor (flexible) industrial cable, 1100 Volts,of size 0.5 Sqmm 3 core, complete incl taking down old unsv cable and all as specified and directed. (Make : Havells/Polycab/Plaza/KEI as approved). |
| 106 | All as per srl item No 105here-in-before but of size of size 1.5 Sqmm 3 core |
| 107 | M&L for painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and directed. |
| 108 | All as per item No. 107 above here-in-before but gray paint for Exhaust fan of any size and make complete all as specified and directed. |
| 109 | Taking down geyser 25/50 ltrs capacity of any make, opening up for inspection descalling by chemical treatment of internal tank, thermostat pipe, base plate assembly carrying out minor repairs including testing for water tightness and pressure and refixing in position including making electrical and water connection all as directed. |
| 110 | S&F heating element Triangle/Cup Type 1.5 KW in replacementfor any make of geyser of 25 litres capacity as per site requirement and sample approved. (Make : Micron/Theetha/ Standard or ISI Marked as approved). |
| 111 | All as per srl item No 110 here-in-before but of 2.0 KW capacity (Make : Micron/Theetha/ Standard or ISI Marked as approved). |
| 112 | All as per srl item No 110 here-in-before but of 3.0 KW suitable for Instant Start Geyser of 3 Ltrs cap of any type. (Make : Micron/Theetha/ Standard or ISI Marked as approved). |
| 113 | S&F in replacementthermostatupto of size 9" long, auto cut/push button type all as specified. (Make : Micron/Theetha/ Standard or ISI Marked of approved make). |
| 114 | All as per srl item No 113 here-in-before but of size 11" long, auto cut/push button type all as specified. (Make : Micron/Theetha/ Standard or ISI Marked of approved make). |
| 115 | S&F indicating lamp round /flat type as required in replacement for geyser 25/ 50 litres capacity as per sample approved. |
| 116 | S&F Non Return Valve ISI marked for geyser 25/50 litres capacity in replacement as per sample approved. |
| 117 | S&F safety plug/valve for geyser 25/50 litres capacity in replacement as per sample as per sample approved. |
| 118 | S&F 304 grade stainless steel re-inforced flexible connection pipe of size 15mm x 300 mm long complete with 2 Nos brass/CP nuts and washers etc in replacement suitable for geyser of any capacity as per sample and all as directed. (Make : SHAKTI/PRAYAG/ ISI Mark as approved) |
| 119 | S&F 304 grade stainless steel re-inforced flexible connection pipe of size 15mm x 450 mm long complete with 2 Nos brass/CP nuts and washers etc in replacement suitable for geyser of any capacity as per sample and all as directed. (Make : SHAKTI/PRAYAG/ ISI Mark as approved) |
| 120 | S&F base plate geyser syphon assembly set complete with inlet, outlet and thermostat pipe including rubber gasket in replacement for any make of geyser of 25 litres cap as per sample. |
| 121 | S&F base plate geyser syphon assembly set complete with inlet, outlet and thermostat pipe including rubber gasket in replacement for any make of geyser of 50 litres cap as per sample. |
| 122 | Supply and fixingin replacement 25 Ltr inner stainless steeltank suitable for 25 Ltr storage water heater complete and all as directed. |
| 123 | Supply and fixingin replacement 50 Ltr inner stainless steel tank suitable for 50 Ltr storage water heater complete and all as directed. |
| 124 | M&L for welding /brazingtheinner shell made out of stainless steel /copper sheet for geyser 25/35/50 ltrs capacity of any make and make the shell water tightincluding testing all as Specified and Directed. (Note:-Taking down, de-scaling, replacement of rubber gasket and any minior repair involvedwill be measured and paid separately.) |
| 125 | S&F Rubber gasket for water heater storage type of any capacity fixed, in replacement and suitable as per the existing, complete all as specified and directed |
| 126 | S&F in replacement MS fastener bolt 8mm dia and upto 150mm long for fixing geyser/Exhaust fan with nut and washer complete. |
| 127 | M&L for replacement of outer body suitable for 25 Ltrs storage water storage heater made of MS Sheet complete with Top & Bottom Cover as per site requirement all as directed. |
| 128 | Supply andproper filling glass wool in between inner and outer tank of geyser complete all as specified and directed. |
| 129 | S&F PVC Round Sheathed, FR grade, Copper Conductor (flexible) industrial cable, 1100 Volts of size 2.5 Sqmm 3 core for connecting the geyser, complete incl taking down old unsv cable and all as specified and directed. |
| 130 | S & F in replacement of Metra clad Socket 240V, 20 A, 2P + E, upto of20Amps capacity of Ivory or blue cap colour. |
| 131 | S & F in replacement of Metra clad plug top 240V, 20 A, 2P + E, upto of 20Amps capacity of Ivory or gray colour. |
| 132 | Supply and Fixing in replacement of MCB SP 16 Amps/ 20 Amps, 230 Volts, 50 Hz with 10 KA,"C" series. |
| 133 | Supply and fixing in replacement of sheet matal enclosures with plug socket single pole and neutal with two pin and earth plug and with one MCB of 20 Amps (SP) complete all as specified . |
| 134 | Supply and fixing in replacement of switch piano flush button 5 Amp single pole one way 230 volts white finish for ceiling fan or exhaust fan as per site requirement and all as directed. |
| 135 | Supply and fixing in replacement of switch piano flush button 15 Amp single pole one way 230 volts white finish for hot water storage/geyser as per site requirement and all as directed. |
| 136 | Supply and fixing in replacement of switch socket combination flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish for connection of wall/cabin/pedestal fans all as specified & directed. |
| 137 | Supply and fixing in replacement of ceiling rose surface PVC 50mm dia 3 terminals including PVC mounting block white/ivory finish for ceiling fan or exhaust fan connection complete as per site requirement and all as directed. |
| 138 | Supply & fixing in replacement of stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqdall as specified and directed. |
| 139 | M&L in replacement of submain wiring PVC insulated FRLS single core with stranded copper cable of size 4 Sqmm in 2 runs and 4 Sqmm one run for earth drawing through existing surface, casing/capping, recessed steel/PVC conduct complete as per site requirement and all as directed. (Note:- Two runs of main cable and one run of earth cable all-toghter shall be considered as one length.) |
| 140 | M&L in replacement submain wiringPVC insulated FRLS single core with stranded copper cable of size 6 Sqmm in 2 runs and 6 Sqmm one run for earth drawing through existing surface, casing/capping, recessed steel/PVC conduct complete as per site requirement and all as directed. (Note:- Two runs of main cable and one run of earth cable all-toghter shall be considered as one length.) |
| 141 | Supply & fixing rigid non-metallic PVC conduit, smoke free, fire retardant, and temp stable quality of size 20mm external dia including all fixing accessories such as couplers, lock nuts, saddles, pipe hooks for securing of electric wires/cables of any type and sizeas laid on roof/ceiling or on wall surface of ISI make as approved all as directed. |
| 142 | All as per item No. 141 above of size 25mm external dia. |
| 143 | NOTES :- 1.The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
