Construction Of Chc At Gadagushaini Tehsil Balichowki Distt. Mandi ( Hp ) Sh- C / O Building Portion, Ws And Si , Septic Tank, Site Development And Rain Water Harvesting System
Tender Value
10.95 Crore
Estimated cost
Bid Submission
04 Jul 2022
0 days left
EMD
21 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
janjehli → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Chc At Gadagushaini Tehsil Balichowki Distt. Mandi ( Hp ) Sh- C / O Building Portion, Ws And Si , Septic Tank, Site Development And Rain Water Harvesting System
BOQ
| Sl. No. | Item Description |
| 1 | Cutting in earth work by mechanical means in all heights and depths in all kinds of soils comprising of pick work, jumper work and blasting work both in soft and hard rock with chiseling and wedging out of rock ( where blasting work is prohibited) and their intermediate classifiction of soils including, dewatering wherever required, setting of the required lines, levels as shown on the drawing and directed by the Engineer-in-charge at site, and sorting out useful and unuseful material and transportationof the unuseful material for disposing at dumping site( to be arranged by the contractor) as per satisfaction of Engineer-in-charge through all modes of transportion including head load, animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools , equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour (if required). All useful material such as stones, shingles aggregate and slates shall be properly stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation as per the directions of the Engineer-in-charge. Any loss to the public and private property, human being, machinery during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges. |
| 2 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains inany width any area on plan,including dressing of sides and ramming of bottoms, any lift, including gettingout the excavated soil and disposal of surplus excavated soils as directed, within any lead All kinds of soil including carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 3 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing 1:3:6 ( one cement : three coarse sand : six graded stone aggregate 20 mm (twenty millimetre) nominal size including carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. Providing and laying cement concrete 1:4:8 (one cement : four coarse sand : eight graded stone aggregate) including carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 5 | Providing and laying in position cement concrete1:5:10 ( one cement : fivesand : ten graded stone aggregate)of specified grade excluding the cost of centering and shuttering - All work up to plinth level including carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:5:10 ( one cement : five coarse sand : ten graded stone aggregate) 40mm (forty millimetre) nominal size including carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 7 | Providing and laying damp-proof course 40mm (forty millimetre) thick with cement concrete 1:2:4 (one cement :two coarse sand : four graded stone aggregate 12.5mm (twelve point five millimetre) nominal size including carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 8 | Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg(one point seven kilogram)per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil. including carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 9 | 50 mm (fifty millimetre)thick fine dressed local stone flooring over 20 mm (twenty millimetre)(average) thick base of cement mortar 1:5 (one cement : fivecoarse sand) with joints finished flush. In Plinth Protection including carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 10 | Constructing Course rubble hammer dressed \"U\" shape open surface drain with side wall. 15x22 fifteen into Twenty Two centimeter in cement mortar 1:6 (one Cement : six Sand) and inside plastring with cement plaster 1:3 (oneCement : three Sand) including earth work and laying 10 cm (ten centimetre) cement concrete in 1:5:10 (one Cement : five Sand : 1ten grad ed stone aggregate) of 40 mm (forty millimetre)nominal size and 7.5 cm (seven point five centimetre)cement concrete 1:2:4 (one Cement : two Sand : four Graded stone aggregate of 20 mm (twenty millimetre) nominal size and finished with a floating coat of neat cement complete as per standard design including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form for Foundation, footing basis of columns etc. and mass concrete including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form for Flat surfaces such as soffits of suspended floors, roofs, landings and the likeFloors etc upto anythickness including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 14 | Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 15 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts including carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 16 | Centering and shuttering including strutting, propping etc. and removal of form for Stairs, (excluding landings) except spiral stai cases including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 17 | Centering and shuttering including strutting, propping etc. and removal of form for Edges of slabs and breaks in floors and walls in any width. Under 20 cm (Twenty Centimeter)wide including carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 18 | Centering and shuttering including strutting, propping etc. and removal of form work for : Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. including carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 19 | Providing weepholes in brick masonry / stone masonry /plain reinforced concrete abutment, wing wall, return wallwith 100 mm (hundred millimetre) dia PVC pipe extending through the full with of the structures with slop of 1(v):20(H) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7including carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 20 | Back filling behind abutment, wing wall retaning walland return wall complete as per drawings & technical specification Clause 1204.3.8 including carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 21 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with1:1.5:3 (onecement : one point five coarse sand : three graded stone aggregate 20 mm (twenty millimetre) nominal sizeincluding carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 22 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (onecement : one point five coarse sand : three graded stone aggregate 20 mm (twenty millimetre) nominal size including carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 23 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete including cost of binding wire upto plinth level. Thermo-Mechanically Treated bars of gradeFe-500D or more including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 24 | Steel reinforcement for R.C.C. work ready to use \"cut and bend\" rebars of approved make from factory/workshop to construction site including placing in position and binding all complete including binding wire above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 25 | Providing and laying in position machine batched and machine mixed design mix M-25 twenty Five grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. All works upto plinth level including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 26 | Providing and laying in position machine batched and machine mixed design mix M-25 Twenty Five grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. All works above plinth level upto floor any level including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 27 | Stone soling/boulder filling dry hand packed in under floorincluding carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 28 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in super-structure above plinth all level and shapes and size in Cement mortar 1:6 (one cement : six coarse sand) including carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 29 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in foundation and plinth in Cement mortar 1:6 (one cement : six coarse sand) including carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 30 | Providing, hoisting and fixing above plinth level up to floor five level precastreinforced cement concrete in mouldings as in cornices, windows sills etc,including setting in cement mortar 1:3 (one cement : three coarse sand) cost of required centering, shuttering but, excluding the cost of reinforcement, with 1:1.5:3 (one cement : one point five coarse sand : three graded stone aggregate 20 mm (twenty millimetre) nominal size including carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 31 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five)in foundations and plinth in : Cement mortar 1:3 (one cement : three coarse sand) including carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 32 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five)in super-structure above plinth level upto floor all level inCement mortar 1:3 (one cement : three coarse sand) including carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 33 | Providing and Fixing wall/partitions of Interior Grade High Pressure Laminate 6mm/8mm/10mm (six millimetre/eight millimetre/ten millimetre) thick upto 2.05 m (two point zero five metre) height with fire resistant chimical resistant,boiling water resistant,envoirnment frendly green DNA with no uria content to be installed with stainless steelfittings,of GREENLAM/MERINO complete including carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 34 | Providing and laying factory made Precast concrete solid blocks of 200 mm (two hundred millimetre) thickness of grade M10 (ten) made of C&D waste from approved manufacturer in superstructure above plinth level up to floor V level.Cement mortar 1:6 (one cement : six coarse sand)including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 35 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm (One hundred into eight millimetre) size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single/double Toughtenglass panes 6mm thick and silicon sealant shall be paid separately) Casement window double panels with S.S. friction hinges 350 x 19 x 1.9 mm (three hundred fifty into nineteen into one point nine millimetre) made of (big series)frame 67 x 60 mm (sixty seven into sixty millimetre) & sash / mullion 67 x 80 mm (sixty seven into eighty millimetre) both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of window above 1.50 sqm).including carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 36 | Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm (one hundred into eight millimetre) size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in- Charge. (Single / double glass panes and silicon sealent shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be madeCasement door with top hung ventilator with 3D and S.S. friction hinges 400 x 19 x 1.9 mm(Four hundred into nineteen into one point nine millimetre) made of (big series) frame 67 x 64 mm (sixty seven into sixty four millimetre), sash 67 x 110 mm (sixty seven into one hundred ten millimetre) & mullion 67 x 80 mm (sixty seven into eighty millimetre) all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 37 | Providing and fixing 35 mm thick including ISI marked Stainless sqm Steel butt hinges with necessary screwsflush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 (three)ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 38 | Extra for providing lipping with 2nd class teak wood battens 25 mm (twenty five millimetre) minimum depth on all edges of flush door shutters (over all area of door shutter to be measured) including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 39 | Extra for providing vision panel not exceeding 0.1 sqm (zero point one square metre) in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured): Rectangular or square including carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 40 | Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L- Type sections, made of 2.50 mm (two point fifty millimetre) thick M.S. Hollow steel Frame Member having single rebate of size 100X50 mm (one hundred into fifty millimetre) and double rebate of size 130X65 mm (one hundred thirty into sixty five millimetre) made of galvanised sheet of Zinc coat 120 gm/sqm (one hundred twenty gram per square metre) of Apollo chaukhat/TATA Parivesh/NCL Secoolar or its equivalent, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm (fifteen into three millimetre) lugs 10 cm (ten centimetre) long kg embedded in cement concrete block 15x10x10 cm (fifteen into ten into ten centimetre) of C.C. 1:3:6 (one Cement : three coarse sand :six graded stone aggregate) 20mm (twenty millimetre)nominal size including carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 41 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm (thirty five into thirty five into five millimetre), joints mitred and welded by angle iron 35x35x5 mm(thirty five into thirty five into five millimetre) or 35x 5 mm (thirty five into five millimetre) flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete including carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 42 | Providing and fixing 19 mm (nineteen millimetre) thick COMMERCIAL board, exterior grade (Grade I)shuttersof approved make finished with1mm (one millimetre) thick laminated sheet on one side including 2nd class teak wood lipping of 19 mm wide x 12 mm (nineteen millimetre into twelve millimetre) thick with necessary screws and bright finished stainless steel piano hinges, complete including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 43 | Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm (six - twelve-six millimetre) insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm (six millimetre) thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm (six millimetre) thick, spacer tube 12mm (twelve millimetre) wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineerin- Charge. The IGUs shall be assembled in the factory/workshop of the glass processor. For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15% ( ten to fifteen percent), light reflection external 10 to 20 %, (ten to twenty percent) shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 44 | P/F wire mesh in Shutter using Stainless Steel grade 304 wire gaugewith wireof dia 0.5 mm (zero point five millimetre) and av. Width of aperture 1.4 mm (one point four millimetre) in both directions including fixing complete in all respects including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 45 | Providing and fixing 300x16 mm (three hundred into sixteen millimetre) stainless steel sliding door bolts, ISI marked with nuts and screws etc. completeincluding carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 46 | roviding and fixing stainless steel tower bolts, ISI marked, with necessary screws etc. complete including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 47 | 200X10 MM (two hundred into ten millimetre) |
| 48 | 150X10 MM (one hundred fifty into ten millimetre) |
| 49 | 100X10 MM (one hundred into ten millimetre) |
| 50 | Providing and fixing stainless steel handles, ISI marked, with necessary screws etc. complete including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 51 | 125 mm (one hundred twenty five millimetre) |
| 52 | 100mm (hundred millimetre) |
| 53 | 75mm (seventy five millimetre) |
| 54 | Providing and fixing stainless steel hanging floor door stopper, 150 mm ( onr hundredfifty milimeter with necessary screws etc. complete including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 55 | Providing and fixing stainless steel hard drawn hooks and eyes including carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 56 | 250mm (two hundred fifty millimetre) |
| 57 | 200mm (two hundred millimetre) |
| 58 | Providing and fixing 150mm (one hundred fifty millimetre) ISI marked oxidised M.S single acting spring hinges with necessary screw etc. complete including carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 59 | Providing and fixing 19mm (ninteen millimetre)thick water proof termite resistant HDMR wood conforming ply wood of ACTION TESA, GREENPLY box including shelves and shutters, the back side of cup board/cabinet shall be 8mm (eight millimetre)thick prelaminated MDF board and all the cut portions of shelves and shutters shall be finished with 1mm (one millimetre) thick pre-lamination/ 4mm (four millimetre)thick veneer pasted over shutter to be polished. All internal surfaces of cup board shall be laminated with 1mm (one millimetre) mica of approved shade . All cut portion of the shelves shall be finished with PVC edging. The shutters of cup board from all sides shall be finished with pvc edging including piano hinges and magnetic catcher with in all accessories etc.complete including carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 60 | Providing and laying full body vitrified floor tiles (premium quality) matte finish in different sizes(thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm (twenty millimetre) thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm(three point three kilogram per square metre) including grouting the joints with white cement and matching pigments etc., complete size 600x600 mm(six hundred into six hundred millimetre)of Asian tiles/ Johnson/ Kajaria/ Orient Bell/ Simpolo/ Nitco or its equivalent. with Granite Border 10 cm (ten centimetre) wide of app. shade including carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 61 | Providing and laying full body GLAZED vitrified floor tiles (premium quality) (With VC shield technology)in different sizes(thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three kilogram per square metre) including grouting the joints with white cement and matching pigments etc., complete size 600x600 mm (six hundred into six hundred millimetre) of Asian tiles/ Johnson/ Kajaria/ Orient Bell/ Simpolo/ Nitco or its equivalentincluding carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 62 | Providing and laying 10mm (ten millimetre) thick of size 60x60 cm (sixty into sixty centi metre) antistatic vitrified antistatic - conductiv abrassion resistant, hard wearing and laveled floor in ASC blue colour suitable for the specified use laid on the existing floor with proper application process. The antistatic conductive rectified vitrified tile with all punched corners of make H&R Johnson India / Orient / Rak /Kajaria/ Nitco should have surfaced electrical resistance - conductive less than 1 MEGA OHM With static Decay Time Less thaen 0.5 seconds and area of each tile should be 0.36 Sqm (zero point three six square metre) the Tile should be fixed using tile adhesive Tiles suitable to fix antistatic vitrified in minimum 6 mm (six millimetre)thick bed and by leaving a space of Minimum 5 mm (five millimetre) arround each tile with the help of + Shaped PVC spacer suitable to leave a grove of 5 mm(five millimetre) around all four sides of each tile . After curing of minimum 24 Hours, Prapare a grid of 18 (eighteen) gauge anilated pure copper wire arround all four sides of antistatic conductive endura tiles complete including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 63 | Providing and laying antiskid full body vitrified floor tiles(premium quality) matte finish in different sizes(thickness to be specified by manufacturer), with waterabsorption less than 0.08 % and conforming to I.S.15622, of approved make, in all colours & shade, inskirting, riser of steps, over 12 mm thick bed of cementmortar 1:3 (one cement: three coarse sand), jointing with greycement slurry @ 3.3 kg/ sqm (three point three kilogram per square metre) including grouting the joint with white cement & matching pigments etc. complete Size of Tile 600x600 mm (six hundred into six hundred millimetre) of Asian tiles/ Johnson/ Kajaria/ Orient Bell/ Simpolo/ Nitco or its equivalent including carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 64 | Providing and laying antiskid full body vitrified floor tiles(premium quality) (With VC shield technology) matte finish in different sizes(thickness to be specified by manufacturer), with waterabsorption less than 0.08 % and conforming to I.S.15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with greycement slurry @ 3.3 kg/ sqm (three point three kilogram per square metre) including grouting the joint with white cement & matching pigments etc. complete Size of Tile 600x600 mm(six hundred into six hundred millimetre) of Asian tiles/ Johnson/ Kajaria/ Orient Bell/ Simpolo/ Nitco or its equivalent including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 65 | Providing and laying 10mm (ten millimetre) thick of size 60x60 cm (sixty into sixty centimetre) antistatic vitrified antistatic - conductiv abrassion resistant, hard wearing and laveled floor in ASC blue colour suitable for the specified use laid in dado floor with proper application process. The antistatic conductive rectified vitrified tile with all punched corners of make H&R Johnson India / Orient / Rak /Kajaria/ Nitco should have surfaced electrical resistance - conductive less than 1 MEGA OHM With static Decay Time Less thaen 0.5 (zero point five) seconds and area of each tile should be 0.36 Sqm (zero point three six square metre) the Tile should be fixed using tile adhesive Tiles suitable to fix antistatic vitrified in minimum 6 mm (six millimetre) thick bed and by leaving a space of Minimum 5 mm (five millimetre)arround each tile with the help of + Shaped PVC spacer suitable to leave a grove of 5 mm (five millimetre)around all four sides of each tile . After curing of minimum 24 Hours, Prapare a grid of 18 gauge anilated pure copper wire arround all four sides of antistatic conductive endura tiles complete including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 66 | Providing And fixing Acid Resistant ceramictiles 300x600 x 10 mm (three hundred into six hundred into ten millimetre) thick of approved Shade and manufacturer in skirting risers of steps and dado 12 mm (twelve millimetre) thick cement mortar 1:3(one cement : three sand) and jointed with cement slurry including carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 67 | Providing and laying Antiskid digital Ceramic glazed floor tiles of size 300x300 mm (three hundred into three hundred millimetre) (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm (twenty millimetre) thick cement mortar 1:4 (one Cement : four Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm (three point three kilogram per square metre) including pointing the joints with white cement and matching pigment etc., complete of Johnson/ Kajaria/ AGT Tiles/ RAK/ Orient Bell or its equivalent including carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 68 | Providing and laying Antiskid Vitrified Matte Finished floor tiles of size 300x300x10 mm (three hundred into three hundred into ten millimetre) (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm (twenty millimetre)thick cement mortar 1:4 (one Cement : four Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm (three point three kilogram per square metre) including pointing the joints with white cement and matching pigment etc., complete of Johnson/ Kajaria/ AGT Tiles/ RAK/ Orient Bell or its equivalent including carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 69 | Providing And fixing Ceramic glazed Digitaltiles 300x600 x 8 mm (three hundred into three hundred into eight millimetre) thick of approved Shade and manufacturer in skirting risers of steps and dado 12 mm (twelve millimetre) thick cement mortar 1:3(one cement : three sand) and jointed with cement slurry including carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 70 | Providing And fixing 8mm (eight millimetre) thick HDFLaminated wooden flooring AC-IV having a good backing layer made up of plastic laminate or melaminemade in superior water Resistant High Density hard wood fibre board make action tesa or its euivalent with all accessories complete over and including 40mm (forty millimetre) thick cement concrete flooring 1:2:4 (one cement: two sand : four stone aggregate) with in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 71 | Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm (three hundred into three hundred into nine point eight millimetre) having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm (twenty millimetre) thick base of cement mortar 1:4 (one cement : four coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. completeincluding carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 72 | Providing and laying antiskid Exterior gradefull body vitrified floor tiles (premium quality) matte finish in different sizes(thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm (twenty millimetre) thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three kilogram per square metre) including grouting the joints with white cement and matching pigments etc., complete size 450x450x15 mm (four hundred fifty into four hundred fifty into fifteen millimetre) of Asian tiles/ Johnson/ Kajaria/ Orient Bell/ Simpolo/ Nitco or its equivalentincluding carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 73 | 25 mm (twenty five millimetre) thick Kota stone slab flooring over 20 mm (Twenty millimetre) with 10 cm (ten centimetre) wide marble band (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (one cement : four coarse sand) including carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 74 | Kota stone slabs 20 mm (twenty millimetre) thick in risers of steps, skirting, dado and pillars laid on 12 mm (twelve millimetre)(average) thick cement mortar 1:3 (one cement: three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing completeincluding carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 75 | Providing and fixing 20 mm (twenty millimetre) thick gang saw cut, Roughly Finishedmachine cut for flooring pproved shade, colour and texture laid over 20 mm (twenty millimetre) thick base cement mortar 1:4 (one cement : four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour and shade including carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 76 | Providing and fixing 20 mm (twenty millimetre) thick gang saw cut, Roughly Finishedmachine cut for Skirting and Riser of steps of approved shade, colour and texture laid over 20 mm (twenty millimetre) thick base cement mortar 1:3 (one cement : three coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour and shade including carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 77 | Providing and fixing of Wooden slats of approved shade 2440mm x128mm x 16mm (two thousand four hundred forty millimetre into one hundred twenty eight millimetre into sixteen millimetre) made MDF backed with acoustical fleece to be installed with 15mm (fifteen millimetre) GI and Lock in Clips on the back of tongue and groove system to be installed with 2400x50mm (two thousand four hundred into fifty millimetre) web flenges 15 and 50mm (fifteen and fifty millimetre) fully with backing of 50mm (fifty millimetre) thick absorb wool/insulation knurled hot depped galavanised steel with 120 GSM Zink coating of Prolad/ Himalayan/ Armstrong. complete including carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 78 | Providing and fixing 18 mm (eighteen millimetre) thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm (twenty millimetre) thick base cement mortar 1:4 (one cement : four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour and shadeArea of slab over 0.50 sqm (zero point fifty square metre) including carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 79 | Providing and laying Heavy Duty Cobble Stone 100x100x100 mm (one hundred into one hundred into one hundred millimetre) of approved shade stone laid over 25mm (twenty fivemillimetre) Thick cement mortar bed of 1:4 (one cement: four sand) including pointingincluding carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 80 | Cement concrete flooring 1:2:4 (one cement : two coarse sand : four graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete 40 mm (forty millimetre) thick with 20 mm (twenty millimetre) nominal size stone aggregate including carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 81 | Providing and fixing 0.60mm (Zero point six zero milimetre) thick prepainterd insulated steel sheet sandwich puf roofing with hot dipped metallic zinc coasted sheet with top coat of regular modified polyester (RNP) organic coating of 20 (Twenty) microns over 5 ( five) miconsprimer coating to back coat of polyester of 5 microns over 5 microns primer coating the thickness of puff shoulfd not be less than 5mm (five millimetre) and wt. of puff should be 35-37kg (thirty five to thirty seven kilogram) per cubic metre including fixingwith self drilling and self tapping fasten of size 5.5 mm (five point five millimetre) dia and 55 mm (fifty five millimetre)lapcomplete including carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 82 | Providing and fixing 0.62mm (Zero point six two milimetre) thick prepainterd steel sheet in roofing with hot dipped metallic zinc coasted sheet with top coat of regular modified polyester (RNP) organic coating of 20 (Twenty) microns over 5 ( five) miconsprimer coating to back coast of polyester of 5 microns over 5 microns primer coating including fixing with self drilling and self tapping fasten of size 5.5 mm (five point five millimetre) dia and 55 mm (fifty five millimetre)lapcomplete including carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 83 | Providing and fixing ridges or hips 60 cm (sixty centimetre) overall with 0.60mm (zero point six zero millimetre) thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (five) microns primer coating + back coat of polyster of 5 (five) microns over 5 (five) microns primer coating i/c fixing with self drilling and self tapping fasten of size 5.5 mm(five point five millimetre) dia and 55 mm (fifty five millimetre) lap complete including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 84 | Providing and fixing valley 90 cm (ninety centimetre) overall 0.62mm(zero point six two millimetre)thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (five) microns primer coating back coat of polyster of 5 (five) microns over 5 (five) microns primer coating i/c fixing with self drilling and self tapping fasten of size 5.5 mm (five point five millimetre) dia and 55 mm (fifty five millimetre) lap complete including carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 85 | Providing and fixing 15 cm (fifteen centimetre) wide, 45 cm (forty centimetre) overall semi- circular plain G.I. sheet gutter with iron brackets 40x3mm (forty into three millimetre) size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete0.80 mm (zero point eight zero millimetre)thick with zinc coating not less than 275 gm/m2 (two hundred seventy five grams per square metre) including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 86 | Providing and fixing M.S. BP Sheet 1.66mm to 2mm (one point six six millimetre to two millimetre) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 87 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm (five hundred ninty five into five hundred ninty five millimetre) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm (one hundred twenty grams per square metre), both side inclusive) consisting of main \"T\" runner with suitably spaced joints to get required length and of size 24x38 mm (twenty four into thirty eight millimetre) made from 0.30 mm (zero point three zero millimetre) thick (minimum) sheet, spaced at 1200 mm (one thousand two hundred millimetre) center to center and cross \"T\" of size 24x25 mm (twenty four into twenty five millimetre) made of 0.30 mm (zero point thiree zero millimetre) thick (minimum) sheet, 1200 mm(one thousand two hundred millimetre)long spaced between main \"T\" at 600 mm (six hundred millimetre) center to center to form a grid of 1200x600 mm (one thousand two hundred into six hundred millimetre) and secondary cross \"T\" of length 600 mm (six hundredmillimeter) and size 24x25 mm (twenty four into twenty five millimetre) made of 0.30 mm (zero point three zero millimetre)thick (minimum) sheet to be interlocked at middle of the 1200x600 mm (one thousand two hundred into six hundred millimetre) panel to form grids of 600x600 mm (six hundred millimetre) and wall angle of size 24x24x0.3 mm (twenty four into twenty four into zero point three millimetre) and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \"T\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm (twenty seven into thirty seven into twenty five into one point six millimetre) fixed to ceiling with 12.5 mm (twelve point five millimetre)dia and 50 mm (fifty millimetre) long dash fasteners, 4 mm (four millimetre) GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm (eighty five into thirty into zero point eight millimetre)spaced at 1200 mm (one thousand two hundred millimetre)center to center along main T, bottom exposed width of 24 mm (twenty four millimetre) of all T-sections shall be prepainted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 600x600 mm (six hundred into six one hundred millimetre), and 0.7 mm (zero point seven millimetre)thick with 8 mm (eight millimetre) drop; made of G I sheet having galvanizing of 100 gms/sqm (hundred grams per square metre) (both sides inclusive) and electro statically polyester powder coated of thickness 60sixty microns (minimum), including factory painted after bending including carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 88 | Providing and fixing \"APHONY FIBRETTE\" tiles made of wood fiber 1mm (one millimetre) width cement composit 15 mm (fifteen millimetre) thick with an option of colours as per the choice of the Architect/ person in incharge of size 595x595 mm (five hundred ninty five into five hundred ninty five millimetre) has excellent noise absorption of 0.70 Zeropoint seven zero NRC as per ISO: 354-1985 and ASTM 423-90 a, Density 400Kg/cum (four hundred kilogram per cubic metre) meets stringent fire rating ASTMD-876 and Fire class-1 as per BS 476part 5 and 6, class P not easily ignitable as per BS- 476 part 5( Ignitability for material) this is applicable for core and class 1 as per BS-476 part 7(Method for classification of surface spread of flame) , weather resistance as per IS 3308, Thermal insulation as per IS:3346-1980 with relative humidity of 90% RH at 60o celsius (140o Fahrenheit) for 15 days = no deterioration conforms to En131682001 and are Rohs complaint. Can be installed on T24 grid system of 0.6 mm thick main T length minimum 3000 mm , web minimum 35 mm (thirty five millimetre) to be placed at 600mm (six hundreds millimetre) centre to centre and secondary cross \"T\"of length 600 mm (six hundred millimetre) web minimum 35 mm (thirty five millimetre) inter locked, wire support of main T to be taken at every 1200 mm (one thousand two hundred millimetre)length wise and 600 mm (six hundred millimetre) width wise specially designed for Acoustuc vibration management and long life including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 89 | Providing and fixing Himalyan Acoustics Cement fiber Elegant Tile 595x595 x5 mm (five hundred ninty five into five hundred ninty five into five hundred millimetre) With square edge density 1050 Kg/cum (one thousand fifty kilogram per cubic metre) covered with absorbtive microfiber coating on the front side and Acoustics fiber on the back side, Thus making it Acoustically absorbtive, water resistance fire resistant NRC up to 0.71 at 100Hz tested as per ISO 354 the tiles are anti sag and are to be installed on T24 grid system of 0.6 mm thick main T length minimum 3000 mm , web minimum 35 mm (thirty five millimetre) to be placed at 600mm (six hundred millimetre) centre to centre and secondary cross \"T\"of length 600 mm (six hundred millimetre)web minimum 35 mm (thirty five millimetre) inter locked, wire support of main T to be taken at every 1200 mm (one thousand two hundred millimetre) length wise and 600 mm (six hundred millimetre) width wise specially designed for Acoustuc vibration management and long life including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 90 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 91 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 92 | Providing and fixing on 110 mm (one hundred ten millimetre) diameter wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimetre) gap for thermal expansion. (i) Single socketed pipes.including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 93 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimetre)gap for thermal expansion including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 94 | Coupler 110mm(one hundred ten millimetre) |
| 95 | Single tee without door :110x110x110 mm (one hundred ten into one hundred ten into one hundred ten millimetre) |
| 96 | Bend 87.5° 110 mm (one hundred ten millimetre) |
| 97 | 110 mm (one hundred ten millimetre)Shoe |
| 98 | 15 mm (fifteen millimetre) cement plaster on rough side of single or half brick wall of mix: 1:6 (one cement : six coarse sand)including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 99 | 15 mm (fifteen millimetre) thick Barium Sulphate plaster plaster on 20cm (twenty centimetre) thick concrete blockwall of mix: 1:6 (one cement: six coarse sand) including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 100 | 6 mm (six millimetre) cement plaster 1:3 (one cement : three fine sand)finished with a floating coat of neat cement and thickcoat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams including carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 101 | 6 mm (six millimetre) cement plaster of mix 1:3 (one cement : three fine sand) including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 102 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre (fifty grams per litre) and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.:New work (Two or more coats applied @ 1.43 litre/ 10 sqm (one point forty three litre per ten squaremetre) Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm (zero point nine zero litre per ten square metre) |
| 103 | Distempering with Acrylic washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat withcement primer including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 104 | Finishing with deluxe multi surface paint system for interior and exteriors using primer as per manufactures specification: Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm(zero point nine zero litre per ten square metre) over an under coat of primer applied @ 0.80 ltr/ 10 sqm(zero point eight zero litre per ten square metre)of approved brand and manufactureincluding carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 105 | French spirit polishing : Two or more coats on new works including a coat of wood fillerincluding carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 106 | Providing and applying white cement based putty of average thickness 1 mm (one millimetre), of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 107 | Wall painting two coats with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre (fifty grams per litre) of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colourincluding carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 108 | Providing and fixing GRC clading of Unistone/NTC tiles 10 mm (ten millimetre) thick of approved shade on R.C.C.surface side as on faces of Arches, masonry walls etc on 12mm (twelve millimetre) thick cement 1:3 (one cement: three sand) and jointed with cement slurry i/c scafolding etc complete including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 109 | Providing and fixing exterior grade High Pressure Laminate 6mm/8mm/10mm ( six milimeter/ Eight Milimeter/Ten Milimeter ) thick with UV Protection, can withstand extreme temprature conditions. fire resistant, chemical resistant , environmental- friendly green DNA with no urea content is to be installed over aluminium frame work with complementing hardware (Revets) of Greenlam/ Merino as shownin elevation & details complete including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 110 | Providing and fixing 18 mm (eighteen millimetre) thick, 150 mm (one hundred fifty millimetre) wide pelmet of coir veneer board ISI marked IS : 14842, including top cover of 6 mm (six millimetre) coir veneer board, nickle plated M.S. Pipe 20 mm (twenty millimetre)dia. (heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm (twenty five into three millimetre)M.S. Flat 10 cm (ten centimetre)long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm (one hundred millimetre into forty millimetre into forty millimetre) on both inner side of pelmet and rawl plugs 75 mm (seventy Five Milimeter long etc. all completeincluding carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 111 | Providing and Fixing Lead Lined X - Ray Room door Complete with All accessoriesincluding carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 112 | Providing and Fixing Corrosion resistant High grade A/S/316 Stainless Steel Members of Kich or Eqivalent in railingincluding carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 113 | Providing edge moulding25 mm (twenty five millimetre) thick, 50 mm (fifty millimetre) wide of Granite including machine polishing to edge to give high gloss finish etc. completeincluding carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 114 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality L D- 2.5 Rectangular shape 600x450 mm (six hundred into four hundred fifty millimetre) internal dimensions including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 115 | Providing and fixing 110 mm (one hundred ten millimetre) high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. completeincluding carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 116 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 117 | ( a ) 20 mm (twenty millimetre) nominal bore |
| 118 | ( b ) 32mm (thirty two millimetre)nominal bore |
| 119 | ( c ) 15 mm (fifteen millimetre) nominal bore |
| 120 | Making connection of 25 to 40 mm (twenty five to forty millimetre) nominal bore G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. completeincluding carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 121 | Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately) including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 122 | Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge.Concealed work, including cutting chases and making good the wall etc. including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 123 | I)2532 (two thousand five hundred thirty two) 32 mm (thirty two millimetre) OD pipe |
| 124 | (ii) 2025 (two thousand twenty five) 25 mm (twenty five millimetre) OD pipe |
| 125 | (iii) 1620 (one thousand six hundred twenty) 20 mm (twenty millimetre) OD pipe |
| 126 | (iv)1216 (one thousand two hundred sixteen) (16 mm (sixteen millimetre) OD pipe |
| 127 | Providing and fixing Anglo Indian universal WC 2061 of with PVc Cistern 2602P CERA / Hinware or Jaqua including carriage of material and other incidentals in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 128 | Providing and fixing WC no. 7011 crane EWC 740x 50x 835 (seven hundred forty into fifty into eight hundred thirty five) in white shade of cera hindware or jaquar Complete In Disabled Toilet including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 129 | Providing and fixing viterous China Water Closet No 2008 of size 520x385x390 (five hundred twenty into three hundred eighty five into three hundred ninty) of Cera or equivalentcomplete including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 130 | Providing and fixing viterous China wash basinNo 10001 Basin In White Shade of Perryware /jaquar/ Hindware/ Ceraor equivalentincluding cutting holes & making good the same including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 131 | Providing and fixing viterous China wash basin Charlotte no 1075 with No 1175 half pedestal jaquar/ Hindware/ Ceraor equivalentincluding cutting holes & making good the same including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 132 | Providing and fixing viterous China wash basin No. 7707 for person with Disability of jaquar/ Hindware/ Ceraor equivalentincluding cutting holes & making good the same and carriage of materials within all leads and lifts :-Of Superior quality as per direction of Engineer-Charge. |
| 133 | Providing and fixing vitreous China Flat backurinal 5001 in White Shade ofHindware/ Ceraor equivalentincluding cutting holes & making good the same and carriage of materials within all leads and lifts :-Of Superior quality as per direction of Engineer-Charge. |
| 134 | Providing and fixing Stainless Steel sink no. 1022-XD of praPrayag Polimers or ots equivalent with C.I. brackets and stainless steel plug 40 mm (forty millimetre), including painting of fittings and brackets, cutting and making good the walls wherever required 510x1040 mm (five hundred ten into one thousand forty millimetre) bowl depth 250mm ( Teo Hundred fifty Milimeter including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 135 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 40mm (forty millimetre) dia including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 136 | Providing and fixing 15 mm (fifteen millimetre) nominal boreuplasticised PVC connection pipe with brass unions 45 cm (forty five centimetre) lengthincluding carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 137 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work 40mm (forty millimetre) dia including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 138 | Providing and fixing 600x450 mm (six hundred into four hundred fifty millimetre) beveled edge mirror of superior glass (of approved quality) complete with 6 mm (six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 139 | Providing and fixing 15 mm (fifteen millimetre) nominal bore C.P. brass long nose bib cock Cat no.CON 107KNJaquar or equivalentsingle controlof approved quality conforming to IS standards.including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 140 | Providing and fixing 15 mm (fifteen millimetre) nominal boreC.P. brass long nose bib cock Cat no.OPP -15037PM Jaquar or equivalentsingle controlof approved quality conforming to IS standards including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 141 | Providing and Fixing Swan neck pillar tap with left hand operating knob single control CON-CHR-123BKN of Jaquar or equivalentcomplete including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 142 | Providing and Fixing OPP-15001PM Pillar cockJaquar or equivalent as per direction complete including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 143 | Providing and Fixing Angular stop cock with wall flange of opel primeno. CON 150083KNStop Cock of jaquar or equavalent complete in all respect including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 144 | Providing and Fixing Concealed stop cock with wall flange of opel primeno. CON 083FTKStop Cock PM single control of jaquar or equavalent complete in all respect including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 145 | Providing and Fixing Angular stop cock with wall flange of opel primeno. OPP-15053PM jaquar or equavalent complete in all respect including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 146 | Providing and Fixing Angular stop cockwith wall flange of opel primeno. CON 053KN of jaquar or equavalent single control complete in all respect including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 147 | Providing and fixing C.P.Mixer for kitchen sink with casted swinging CON 309KN jaquar or equavalent complete In all respect including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 148 | Providing and Fixing Soap dish recessed type stainless steel AHS-1531of Jaquar or equivalentcomplete in all respect including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 149 | Providing and fixing Towel Rack with lower hangerNo. AHS-1581H of hotelier series of JAQUAR, or equivalentof superior quality including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 150 | P/FU Shaped wall mountedrail with hinges 600 x 100mm (six hundred into one hundred millimetre) Cat No. B2210107 and Wall Mounted Grab Bar 600mm (six hundred millimetre) Long CAT No.B2210106jaquar or equivalent Superior quality including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. Jaquar |
| 151 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 152 | 25mm (twenty five millimetre) |
| 153 | 20mm (twenty millimetre) |
| 154 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 155 | 15 mm (fifteen millimetre) |
| 156 | 20mm (twenty millimetre) |
| 157 | 32mm (thirty two millimetre) |
| 158 | Providing and Placing on terrace ( at all floor levels ) polyethylene water storage tank , IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet , outlet and overflow pipes but without fittings and the base support of tank including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 159 | Providing and fixing 15 mm (fifteen millimetre) nominal bore ball valve (brass) of approved quality, High or low pressure, with plastic floats completeincluding carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 160 | Providing and fixing 110 mm (one hundred ten millimetre) high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. completeincluding carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 161 | Providing and fixing 150 mm (one hundred fifty millimetre) high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. completeincluding carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 162 | Providing and fixing 110 mm X 90 mm (one hundred ten millimetre into ninty millimetre)PVC floor trap of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete.including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 163 | Providing and fixing PVC door bend with ovalaccess door, insertion rubber washer 3 mm (three millimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 164 | I) 110mm (one hundred ten millimetre) dia |
| 165 | II) 150 mm (one hundred fifty millimetre) dia |
| 166 | Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 167 | I) 110mm (one hundred ten millimetre) dia |
| 168 | II) 150 mm (one hundred fifty millimetre) dia |
| 169 | Providing and fixing PVC plain double equal branch ISI marked including fixing withapproved adhesive etc. complete including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 170 | I) 110mm (one hundred ten millimetre) dia |
| 171 | II) 150 mm (one hundred fifty millimetre) dia |
| 172 | Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm (three millimetre) thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 173 | I) 110mm (one hundred ten millimetre) dia |
| 174 | II) 150 mm (one hundred fifty millimetre) dia |
| 175 | Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc.complete including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 176 | I) 110mm (one hundred ten millimetre) dia |
| 177 | II) 150 mm (one hundred fifty millimetre) dia |
| 178 | Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 179 | I) 110mm (one hundred ten millimetre) dia |
| 180 | II) 150 mm (one hundred fifty millimetre) dia |
| 181 | Providing and Fixing Paper Holder No 1553 of Jaquar or equivalentcomplete in all respect including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 182 | Providing and Fixing Cloth Liner No 1565 of Jaquar or equivalentcomplete in all respect including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 183 | Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slabwith 1:1.5:3 mix (one cement : one point five coarse sand : three graded stone aggregate 20 mm (twenty millimetre) nominal size, foundation concrete 1:4:8 mix (one cement : four coarse sand: eight graded stone aggregate 40 mm (forty millimetre) nominal size), inside plastering 12 mm (twelve millimetre) thick with cement mortar 1:3 (one cement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm (ninty into eighty centimetre) and 45 cm (forty five centimetre) deep including C.I. cover with frame (Light duty) 450x610 mm (four hundred fifty into six hundred ten millimetre) internal dimentions, total weight of cover and frame to be not less than 38 kg (thirty eight kilogram) (weight of cover 23 kg (twenty three kilogram) and weight of frame 15 kg (fifteen kilogram)including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
| 184 | Constructing soak pit 1.20x1.20x1.20 m (one point twenty into one point twenty into one point twenty metre) filled with brickbats including S.W. drain pipe 100 mm (hundred millimetre) diameter and 1.20 m (one point twenty metre) long complete as per standard design including carriage of material and other incidentials in all leads and lifts and as per direction of the Engineer-in-Charge. |
AI Tender Summary
Tender Timeline
Jun 25, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJul 04, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 04, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender