University Of Pune-UOP has published Modernization And Upgradation Work Of Pumba Auditorium At Savitribai Phule Pune University Providing Civil Items Providing Interior And Acoustics Works Providing Stage Lighting And Other Works Providing Electrical Works. Submission Date for this Tender is 25-07-2022. Electrical Maintenance Tenders in Pune Maharashtra. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 18-Jul-2022 | Date corrigendum | Date | 25-07-2022 |
| Sl. No. | Item Description |
| 1 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete |
| 2 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6mmdiameter / 2 hoop iron strips 25mmX 1.6mmplacedat every third course, properly bent andbonded at ends scaffolding, racking out joints andwatering etc. complete.Bd.G.7 Page No. 316 |
| 3 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. |
| 4 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. |
| 5 | Providing sills of required material 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, polishing, rounding edges, cleaning complete. b) Granite |
| 6 | Providing and applying pearl/ luster finish paint of approved colour and shade to the existing plaster surface including scaffolding, preparing the surface, applying the acrylic wall putti etc. complete. |
| 7 | Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete. |
| 8 | Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc. |
| 9 | Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete. |
| 10 | Removing cement or lime plaster including disposing of the spoils as directed with all leads, lifts etc, complete. |
| 11 | Removing iron pipe raling having wooden R.C.C. or C.C. or iron post and stacking the materials as directed etc. complete. |
| 12 | Dismantling the R.C.C. Work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete. |
| 13 | Providingand fixing in position U.P.V.C.(UnplasticizedPoly Vinyl Chloride) having multi-chamberedouter frame section (73x50) mm with an outer wall thickness of 2 mm & steel reinforcement, multi-chamberedslider frame(73x60) mm with steel reinforcement, multi-chamberedslidersash (46x82) mm with steel reinforcementdesignedto give optimum strength, 5 mm thick tougheneddouble glass with 12 mm spacer of good quality including alluminium track, Inter-locking profile,coextrudedbeadings, EPDM gaskets, silicon sealent, sliding handle, fixtures and fastenings(couplings, hinges) including with all requiredscrews and nuts with all necessary U.P.V.C.section s as per the detaileddrawing and as directed by Engineer-In-Charge etc. complete |
| 14 | Removing white wash or colour wash by steel wire brushing and / or scrapping sand preparing and preparing the wall surface smooth including necessary repairs to scratches etc. complete.Spec.No.: As directed by Engineer in charge. |
| 15 | Demolished Material Shifting by truck Spec. No: - As directed by Engineer in charge |
| 16 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping,compacting, roughening them if special finish is to be provided,finishing if required and curing complete,with reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc.complete. With natural sand/V.S.I. quality Artificial Sand Bd. E. 1 Page No. 287 |
| 17 | Providing and making Holes (Core cutting ) in RCC chajjas , slab, pardi, beam of dia. 100 mm for passing the pipe line. Spec. No: - As directed by Engineer in charge |
| 18 | Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed designs and drawing including fixing in position without connecting plates, braces etc. and one coat of anticorrosive paint and over it two coat of oil paintings of approved quality and shade complete. Spec. No: - Bd.-C 2 Page No. 275 |
| 19 | Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc. as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc.complete. Spec. No. : As directed by Engineer-in-charge. AndB-18 Page No. 78 |
| 20 | Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. Spec. No: - Bd. M . 3B Page No. 380 |
| 21 | Removing acoustical cladding (panel) |
| 22 | Removing existing Carpet from the floors. |
| 23 | Removing existing chairs |
| 24 | Removing, refixing of existing chairsin position, re-furbishment included toucinh up PU foam density 48 – 52 kgs/cu m. wherever necessary to ensure consistency in density for longevity. Upholstered in Foam laminated stretched sandwich Fabric for clean finish and soft comfortable feel as per the colour & pattern selected by the client. Seat and Back to be provided with new protective cover. Wooden or PU armrest to be re-finished with polishing / cleaning Along with Seat & row numbers in auto glow. sample to be selected & approved Spec.: As directed by Engineer-In- Charge |
| 25 | Providing & Fixing of Armstrong Soft Fibre Acoustical Suspended Ceiling System with Optra (Bevelled Tegular) Edge Tiles With Armstrong 15mm Exposed Grid. The tiles should have Humidity Resistance (RH) of 95%, NRC 0.9 - 1.0, Light Reflectance =85%, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 15mm , suitable for Green Building application, with Recycled content of 66% (GW)and 74 % RW. The tile shall be laid on precoated G.I channel 32 with 15 mm wide T-section flanges colour white having rotary stitching on all T-sections i.e. the Main Runner, 1200 mm and 600 mm Cross Tees with a web height of 32 mm and aload carrying capacity of 7 Kilograms/M2 with aminimum pullout trength of 100 Kilograms. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system. The Tile and Grid system used together should carry a 1 year warranty. products approved as per GRIHA and BS 476 etc. complete. |
| 26 | Providing & Fixing in position, Acoustical Panelling made from Fabric wrapped Compressed polyester fibre non-woven 9 mm panels on, 50x50 mm sal-wood frame of 600x600 c to c having wooden supports from wall of required length ,in front of 1000 gsm synthetic wool 50 mm thick with chicken mesh on wall side, including cost of required Cut-Outs, decorative mouldings / finishing-items/ paint & Scaffolding , a sper Architectural & Acoustical Design & Instructions & Complete in all aspects. including all materials labour, finishing etc complete. |
| 27 | Providing & Fixing in position, Acoustical Panelling made from Gypsum plain 12 mm panels on, 50x50 mm Sal-wood frame of 600x600 c to c having woodensupports from wall of required length, in front of 1000 Gsm synthetic wool 50 mm thick with chicken mesh on wall side, including cost of required Cut-Outs, decorative mouldings/ finishing-items/ paint & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects. including all materials labour, finishing etc complete |
| 28 | Providing & Fixing in position, Acoustical Panelling made from 12mm wp Plywood & 1.5 mm laminateon, 50 x 50 mm Sal-wood frame of 600 x 600 c to c having wooden supports from wall of required length, in without synthetic wool 50 mm thick with chicken mesh on wallside, including cost of required Cut-Outs, decorative mouldings / finishing-items / paint & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects.including all materials labour,finishing etc complete |
| 29 | Providing & Fixing in position Acoustical Doors along with 150 x 150 mm teak wood door frame, doors leafs made from 50mm Teak wood frame 600 x600 c to c filled with 800 Gsm synthetic wool 50mm thick and 5mm Tecsound , 12mm waterproof ply & veneer from both sides , including 150mm heavy duty SS hinges (Geze / Dorma or eq.) 4 no each leaf, with Door-closers (Dorma / Geze or eq.) including cost of decorative mouldings / finishing-items / melamine polish & Scaffolding as per detailed Architectural -Acoustical Design & Drawings etc. Complete in all aspects. Specification No: As directed by engineer in charge |
| 30 | Providing and fixing in position stage flooring made from 18MM plywood 1200X2400 and 18MM teak wood planks 100 X 800 having tongue and groove on salwood frame of 50 x 100 and 600 MM C to C on state surface including cost ofrequired cutouts, decorative moldings / finishing items / Polish etc As for architectural and acoustical design and instructions and complete in all respects including all material labor finishing etc complete. |
| 31 | Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/ fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetr perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab.The gypsum board should be fixed to galvanized iron grid with necessary screws.The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediatec hannels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete. The ceiling should be inclussive of 1000 Gsm synthetic wool 50 mm thick |
| 32 | Providing & Fixing in position, Carpet more than 850 gsm, made with100% stain proof synthetic fibres of approved make along with 5mm underlay as per Architectural & Acoustical Design & Instructions & Complete in all aspects. Specification No: As directed by engineer in charge. (Basic Rates of Carpet Rs 1150.00/ sq.m) |
| 33 | Providing & Fixing in position, 1000 mm X 50 mm X 25mm L shape Auto-glowAluminium extruded strips on Auditorium steps as per detailed Architectural - Acoustical Design & Drawings etc. Complete in all aspects. Specification No: As directed by engineer in charge. |
| 34 | Providing & Fixing in position, MS fabrication work using angles, sqr tubes, C channels etc for various partition frame as per Design & Instructions & Complete in all aspects. Including all materials labour, finishing etc complete |
| 35 | Providing & fixing in position, heavy duty fully upholstered Auditorium Chairs 540 mm c to c tip-up type. Height of back should be 980 (+/- 20) mm. having following specifications: Powder Coated Heavy duty MS Stand. Moulded Polyurethane Foam cushion. PU foam density 48 – 52 kgs/cu m. Moulded Polyurethane Foam manufactured in certified ISO 9001 facility to ensure consistency in density for longevity. Upholstered in Foam laminated stretched sandwich Fabric for clean finish and soft comfortable feel as per the colour & pattern selected by the client. Seat and Back with moulded synthetic protective cover. Wooden or PU armrest of required size & length. Mounted using Anchor fasteners. Along with Seat & row numbers in auto glow. sample to be selected & approved Spec.: As directed by Engineer-In- Charge (Basic Rate of Chair Rs. 6000.00/No) |
| 36 | Providing and Fixing Rollar Blinds AMI Make or approved make & shade of 38 mm round Aluminium channel with Blackout fabric & telting with chain (Ball) system with all necessary fixtures and fitting etc. complete. (Sample to be final by Engineer In-charge prior execution of work) |
| 37 | Providing and fixing Rostrum of size 750x450x1050 made out of 19mm thick waterproof ply and finished with veneer, melamined polished including making necessary arrangements for elctrical conduiting, lighting etc complete (Base rate of veneer - 2000/Sqm) |
| 38 | Providing & fixing of Table (1200mm X 600mm X 750 mm) using plywood, Teakwood bidding/lipping Patti with Veneer & melamine finish from both side as per detailed Design & Drawings etc. Complete in all aspects. (Refer detailed drawing & design) Specification No: As directed by engineer in charge. |
| 39 | Providing and Fixing Armstrong Channelled Woodworks perforated panels of width 192mm, thickness of 15mm and length 2400 mm, made of a Moisture resistant fibre board substrate with a laminated facing as per the approved shade (Portland Maple, Sea Beech, Siam Wood & Mystique Walnut, Interior White, Alumina Pearl) and a melamine balancing layer on the reverse side. The boards shall have a special perforation pattern where the reverse surface has a “Helmholtz” fluted perforation with consecutive 3mm wide groove followed by 13mm of visible pane. The edges of the panel shall be “tongue-and-grooved” to fix special clips for installation and seamless visual. The back of the perforated panel shall have sound absorbing non-woven Soundtex acoustical fleece hot pressed to achieve NRC of 0.6. (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 and Humidity Resistance (RH) of 70% with camber limit less than 1mm/1000mm and bow less than 1mm/300mm.The panels shall be mounted on special aluminium splines (keel) using inside clips provided by Armstrong and approved by the Architect/ Engineer-in-Charge. |
| 40 | Providing & Fixing 19 mm ply planels finished with 1 mm laminate on any surfance including 19 mm waterproof ply, TW lipping/moulding of appropriate size with melaine polish as pe instruction, etc complete |
| 41 | Providing, installing and commissioning FOH speaker of make BOSE AMU 208 as per instruction and as per drawings including making all the requisite connections, testing after installation etc complete |
| 42 | Providing, installing and commissioning Subwoofer of make BOSE F1 Sub as per instruction and as per drawings including making all the requisite connections, testing after installation etc complete |
| 43 | Providing, installing and commissioning Mounting Bracketsas per instruction and as per drawings including making all the requisite connections, testing after installation etc complete |
| 44 | Providing, installing and commissioning Monitor speakers of make BOSE RMU 208 as per instruction and as per drawings including making all the requisite connections, testing after installation etc complete |
| 45 | Providing, installing and commissioning 16 Channel Mixer of make Yamaha as per instruction and as per drawings including making all the requisite connections, testing after installation etc complete |
| 46 | Providing, installing and commissioning Microphone with stand of make AHUJA 101 xlr as per instruction and as per drawings including making all the requisite connections, testing after installation etc complete |
| 47 | Providing, installing and commissioning Wired Handheld Microphone of make Shure SM58 as per instruction and as per drawings including making all the requisite connections, testing after installation etc complete |
| 48 | Providing, installing and commissioning Wireless Handheld Microphone system (set) of make Shure XLS UHF as per instruction and as per drawings including making all the requisite connections, testing after installation etc complete |
| 49 | Providing, installing and commissioning Wireless Headset Microphone system (set) of make Shure XLS UHF as per instruction and as per drawings including making all the requisite connections, testing after installation etc complete |
| 50 | Providing, installing and commissioning Podium Goosenec microphon 15"/ 18" of make Shure MX415 with base as per instruction and as per drawings including making all the requisite connections, testing after installation etc complete |
| 51 | Providing, installing and commissioning Microphone Patch panels 3 XLR x 3 nos of makeas per instruction and as per drawings including making all the requisite connections, testing after installation etc complete |
| 52 | Providing and fixing Microphone Cable .5 sq mm 2 core shilded including PVc piping of approved make as per instruction and as per drawings including making all the requisite connections, testing after installation etc complete |
| 53 | Providing and fixing Speaker cable 2.5 sq mm 2 core including PVc piping of approved make as per instruction and as per drawings including making all the requisite connections, testing after installation etc complete |
| 54 | Providing, installing and commissioning Power Amplifier of Maximum Rated Power: 2000 W (250 W x 8 channels at 4 ohms); Input Channels: 8 (balanced line level); Output Channels:8of make BOSE PM8250 as per instruction and as per drawings including making all the requisite connections, testing after installation etc complete |
| 55 | Providing, installing and commissioning HD / WXGA Projector 6000ANSI or more, required short throw lens of make Epson G7000 W as per instruction and as per drawings including making all the requisite connections, testing after installation etc complete |
| 56 | Providing, installing and commissioning Short Throw lens of make ELPLU03 as per instruction and as per drawings including making all the requisite connections, testing after installation etc complete |
| 57 | Providing and fixing Motorized Screen of approved make as per instruction and as per drawings including making all the requisite connections, testing after installation etc complete |
| 58 | Providing and fixing 24U Rack of approved make as per instruction and as per drawings including making all the requisite connections, testing after installation etc complete |
| 59 | Providing and fixing RGBHV cable of approved make as per instruction and as per drawings including making all the requisite connections, testing after installation etc complete |
| 60 | Providing and fixing HDMI cable of approved make as per instruction and as per drawings including making all the requisite connections, testing after installation etc complete |
| 61 | Providing and fixing HDMI Booster switch of approved make as per instruction and as per drawings including making all the requisite connections, testing after installation etc complete |
| 62 | Providing, fixing in position & commissioning as per consultant drawings & instructions 1000 W Flood asymmetric Halogen, along with all hardware & accessories (Satan/ KVM/ Canara/ Modern/ Effectron or eq) |
| 63 | Providing, fixing in position & commissioning as per consultant drawings & instructions Dimmer 2KW 6 Ch, DMX / analogue along with 4 pole 63 A mcb & db, including all hardware & accessories(Raytech ) |
| 64 | Providing, fixing in position & commissioning as per consultant drawings & instructions Colour PARCAN 64 1KW lights, along with all hardware & accessories (Satan /Canara/ kvm/ Modern) |
| 65 | Providing, fixing & commissioning in position as per consultant drawings & instructions, 15 A power points ( including socket without switch) on light bars for stage lighting, 2.5 Sq mm 3 core wiring from connector panel in control pit (Separate cable per point), including cable tray PVc piping its, all complete with termination.(Points on light bars & walls). |
| 66 | Supplying & erecting I.S.I. mark Rigid P.V.C. conduit 25 mm. dia. with necessary accessories in wall/floor with chiselling appropriately as per Spec No. WG-MA/CON |
| 67 | Supplying and erecting PVC trunking (PVC Casing n Capping) of size 25 mm with accessories on wall/ceiling Spec No: WG-MA/CON |
| 68 | Supplying & erecting mains with 1x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. (For Earthing) |
| 69 | Supplying & erecting mains with 2x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places.Spec No: WGMA/BW |
| 70 | Supplying & erecting mains with 2x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW |
| 71 | Supplying & erecting mains with 2x4 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/BW |
| 72 | Supplying and erecting modular type switch 6A / 10A ISI mark approved make duly erected on provided plate and box with wiring connections complete. Spec No. WG-PW/CW |
| 73 | Supplying and erecting modular type switch 16A ISI mark approved make duly erected on provided plate and box with wiring connections complete. Spec No. WG-PW/CW |
| 74 | Supplying and erecting modular type 3 pin 6A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete.Spec No. WG-PW/CW, Page No. 21 |
| 75 | Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete.Spec No. WG-PW/CW, Page No. 21 |
| 76 | Supplying and erecting modular type blanking plate one module ISI mark approved make duly erected on provided plate & box. |
| 77 | Supplying and erecting PVC Surface modular switch box with double mounting plate for 2 modules duly erected. |
| 78 | Supplying and erecting PVC Surface modular switch box with double mounting plate for 3 modules duly erected |
| 79 | Supplying and erecting PVC Surface modular switch box withdouble mounting plate for 4 modules duly erected. |
| 80 | Supplying and erecting PVC Surface modular switch box with double mounting plate for 6 modules duly erected. |
| 81 | Supplying and erecting PVC Surface modular switch box with double mounting plate for 8 modules duly erected. |
| 82 | Supplying and erecting PVC Surface modular switch box with double mounting plate for12modules duly erected. |
| 83 | Supplying and erecting PVC Surface modular switch box with double mounting plate for16/18modules duly erected. |
| 84 | Point wiring in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FR grade copper wire, modular type switch,earthing and required accessories as per specification No: WG-PW/SW |
| 85 | Secondary point wiring for additionallight/ bell point in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FR/ FRLSH grade copper wire with required accessories as per specification No: WG-PW/SW |
| 86 | Wiring for plug on board with Switch socket, copper wiring and earthing as per specification No: WG-PW/SW |
| 87 | Supplying and erecting modular type Telephone socket one gang with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete.Spec No. WG-TW |
| 88 | Supplying & erecting Telephone cable 2 pair with 0.5 mm dia. laid in provided PVC casing / conduit. Spec No. WG-TW |
| 89 | Supplying & installing UTP networking Cat-6 cable suitable for LAN / WAN Computer net-working. Spec No. WGCOC/NC |
| 90 | Supplying and fixing tool-less Information Outlet (Ethernet) flush/surface type in provided modular box as per specification no. WG-NAS/IO |
| 91 | Supplying, installing & testing UTP Connector (RJ-45). Spec No. WG-NAS/UTPC |
| 92 | Supplying and erecting CRCA /die-cast aluminium powder coated housing LED panel light (slim edge-lit) square /round shape suitable for 18 to 20 W with provision for plane front frame with translucent cover fixed to the housing complete. (Light should be Dimmable type) |
| 93 | Supplying and erecting CRCA /die-cast aluminium powder coated housing LED panel light (slim edge-lit) square / round shape suitable for 19 to 24 W with provision for plane front frame with translucent cover fixed to the housing complete. |
| 94 | Supplying LED concealed type foot / step light with PVC body for indoor application suitable for upto 5 W LED including driver and erecting by making necessary arrangement/recess in wall to make it flush with surface |
| 95 | Supplying & erecting LED 20W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete. |
| 96 | Supplying & erecting DALI CONTROLLER |
| 97 | Supplying & erecting KEYPAD |
| 98 | Supplying & erecting on line UPS pure sine wave of 8 kVA capacity complete with standard features,along with necessary SMF batteries for 30 mins battery backup, as per specification no. AP-UPS |
| 99 | 4Way ETPN DB - LDB (Lighting Distibution Boards)- Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SPMCB of 12 poles, on iron /GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB |
| 100 | Incomer - MCB - (Lighting Distibution Boards) -Supplying, erecting & marking TPN MCB 6A to 32A, Cseries in provided distribution board as per specification no. SW-SWR/MCB |
| 101 | Incomer - RCCB - (Lighting Distibution Boards) - Providing, erecting and commissioning 4 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 40A complete as per specification no. SWRCCB/RCCB |
| 102 | Outgoing -MCB -(Lighting Distibution Boards) -Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB |
| 103 | 8 Way ETPN DB - RPDB (Raw Power Distibution Boards)- Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SPMCB of 24 poles, on iron/ GI frame/wooden board.(horizontal busbar type) as per specification no. SWSWR/MCBDB |
| 104 | Incomer - MCB - (Power Distibution Boards) - Supplying, erecting & marking TPN MCB 40A to 63A, Cseries in provided distribution board as per specification no. SW-SWR/MCB |
| 105 | Outgoing - MCB - (Power Distibution Boards) - Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB |
| 106 | UPS I/C DB Supplying and erecting triple pole and neutral distribution board (TPNDB) surface/ flush mounted suitable for SPMCB of 12 poles on iron / GI frame (horizontal busbar type) as per specification no. SWSWR/MCBDB |
| 107 | Incomer - Supplying, erecting & marking TPN MCB 6A to 32A, Cseries in provided distribution board as per specification no. SW-SWR/MCB |
| 108 | 4Way ETPN DB - 3PH UPS O/G DB (3Ph UPS Distibution Boards)- Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SPMCB of 12 poles, on iron /GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB |
| 109 | Incomer - MCB - (3Ph UPS Distibution Boards) -Supplying, erecting & marking TPN MCB 6A to 32A, Cseries in provided distribution board as per specification no. SW-SWR/MCB |
| 110 | Incomer - RCCB - (3Ph UPS Distibution Boards) - Providing, erecting and commissioning 4 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 40A complete as per specification no. SWRCCB/RCCB |
| 111 | Outgoing -MCB -(3PH UPS Distibution Boards) -Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB |
| 112 | 12Way SPN DB - ELDB (Emergency Lighting Distibution Boards)- Supplying and erecting single pole and neutral distribution board (SPNDB) surface/flush mounted with 2 poles for incoming and 10 poles for outgoing SP MCB’s on iron/ GI frame as per specification no. SW-SWR/MCBDB |
| 113 | Incomer - MCB - ELDB - Supplying, erecting & marking DPMCB 6 A to 32 A B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB |
| 114 | Incomer - RCCB - ELDB - Providing, erecting and commissioning 2 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 16/ 25A complete as per specification no. SW-RCCB/RCCB |
| 115 | Outgoing -MCB -(Emergency Lighting Distibution Boards) -Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB |
| 116 | 12Way SPN DB - 1PH UPS O/G DB (For 1Ph I/P UPS Distibution Boards)- Supplying and erecting single pole and neutral distribution board (SPNDB) surface/flush mounted with 2 poles for incoming and 10 poles for outgoing SP MCB’s on iron/ GI frame as per specification no. SW-SWR/MCBDB |
| 117 | Incomer - MCB -(For 1Ph I/P UPS Distibution Boards)- Supplying, erecting & marking DPMCB 6 A to 32 A B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB |
| 118 | Incomer - RCCB - (For 1Ph I/P UPS Distibution Boards)- Providing, erecting and commissioning 2 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 16/ 25A complete as per specification no. SW-RCCB/RCCB |
| 119 | Outgoing -MCB (For 1Ph I/P UPS Distibution Boards) -Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB |
| 120 | Supplying & erecting Acrylic with LEDpower supply EXIT SIGNAGE board of size 9"x18" |
| 121 | Supply, Installation, Testing & Commissioning ofMain LT Panel manufactured out of SWG 14/16 sheet. Fabrication in Iron angle frames of reqd. Size Al. busbar with colour coding heat shrinkable sleeves on installation of insulators porcelain or Epoxy, neoprene gaskets for doors, two coates of redoxide paints & superior quality of enamel paints. Hardware : MS nut bolt of req. size and length, MS hinges, self locked for doors, danger board in Marathi & English, Panel foundation in MS Frame on trench. Incomer (MSEB & DG) - Providing & erecting 3 Pole MCCB of 250A,415V capacity with short circuit rating 36 kA (Ics=100% of Icu) adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB |
| 122 | Outgoing - (LDB, UPS I/C DB, Spare) Supplying, erecting & marking TPN MCB 32A, Cseries in provided distribution board as per specification No. SW-SWR/MCB |
| 123 | Outgoing - (RPDB,Fire Panel, AC O/D Unit,Spare) Supplying, erecting & marking TPN MCB 63A, Cseries in provided distribution board as per specification No. SW-SWR/MCB |
| 124 | Outgoing - (Lift, 3Ph HVAC I/D Unit,Spare) Supplying, erecting & marking TPN MCB 6A to 32A, Cseries in provided distribution board as per specification No. SW-SWR/MCB |
| 125 | Outgoing -(Stage Lighting DB, Spare)Supplying erecting and marking triple pole isolators only switch version of miniature circuit breaker of 100A with required wiring connections and lugs etc. in provided distribution board complete |
| 126 | Outgoing -(CCTV,Acc.Contr.,PA Syst.,1Ph HVAC I/D Unit) Supplying, erecting & marking DPMCB 16A, C- series in provided distribution board as per specification No. SW-SWR/MCB |
| 127 | Supplying and erecting Iron, sheet metal workconsisting of CRCA Sheets, Various sections of iron, Plates, Chequered Plates, Rods, Bars, MS pipes, etc. for panel board or any other purposes complete with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. |
| 128 | CRCA sheet 1.6 mm (16 guage) to be used for fabrication of boxes panel boards etc. including cutting bending, drilling, welding, rivetting etc. and painting with one coat of red lead paint and 2 coats of enamel paint. Spec No. CP/BB |
| 129 | Supplying and erecting bus bar chamber triple pole with neutral with four aluminium bars, 500V 300A complete as per specification no. CP-BB |
| 130 | Supplying and erecting panel mounting type digital voltmeter having Three and half digit LED display,calibrated for 0 to 750V AC suitable to operate on 500V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer. |
| 131 | Supplying and erecting panel mounting type digital ammeter having Three and half digit LED display,external C.T. operated, calibrated for suitable to operate on 500V 0to1000A AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer. |
| 132 | Providing and erecting Selector Switch suitable for Voltmeter / Ammeter for 3 phase A.C supply 500V, 50Hz, on provided box / panel and duly connectin g with necessary PVC wire leads and lugs. |
| 133 | Providing and erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 ratio with 15VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates. |
| 134 | Supplying & erecting LED type Indicating pilot lamp with LED colours Red / Yellow / Green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc. |
| 135 | Supplying, erecting & terminating XLPE armoured cable 3 core 2.5 sq. mm. copper conductor continuous 5.48 sq.mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU |
| 136 | Supplying, erecting & terminating XLPE armoured cable 3 core 4 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU |
| 137 | Supplying, erecting & terminating PVC armoured cable 4 core 4 sq mm copper conductorcontinuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU |
| 138 | Supplying, erecting & terminating PVC armouredcable 4 core 6 sq mm copper conductorcontinuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no.CB-LT/CU |
| 139 | Supplying, erecting & terminating PVC armouredcable 4 core 10 sq mm copper conductorcontinuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no.CB-LT/CU |
| 140 | Providing & erecting Hot deeped Galvanised Perforated type Cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner. Spec No. CB-CT |
| 141 | Providing & erecting Hot deeped Galvanised Perforated type Cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 200 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner. Spec No. CB-CT |
| 142 | Supplying and erecting Iron, sheet metal workconsisting of CRCA Sheets, Various sections of iron, Plates, Chequered Plates, Rods, Bars, MS pipes, etc. for panel board or any other purposes complete with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. |
| 143 | Supplying, erecting and testing optical type smoke detector complete on box as per specification No. FF-FAS/SD |
| 144 | Supplying, installing, testing and commissioning manual call point (Pill box) with break glass push button in metal enclosure complete as per specification no. FF-FAAS/MCP |
| 145 | Supply and erecting hooters with CRCA enclosure complete as per specification No. FF-FAAS/HTR |
| 146 | Supplying and erecting XLPEarmoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling as per specification No. CB-LT/CU |
| 147 | Supplying, erecting, testing and commissioning the 2 Zones Microprocessor based conventional Fire Alarm Control Panel (FACP) with standard accessories complete as per specification No. FF-FAAS/FACP |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
