Rejuvanation Of Urban Heritage Core Near Tali Temple Phase Iii Rejuvanation Of Urban Heritage Core Near Tali Temple Phase Iii
Tender Value
17.66 Lakhs
Estimated cost
Bid Submission
02 Jul 2022
0 days left
EMD
50000
Bank guarantee accepted
Document Fee
2800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kozhikode → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Rejuvanation Of Urban Heritage Core Near Tali Temple Phase Iii Rejuvanation Of Urban Heritage Core Near Tali Temple Phase Iii
BOQ
| Sl. No. | Item Description |
| 1 | FURNITURE WORKS |
| 2 | od69469/2022_2023 : Providing and fixing Glazed showcase units of size 1700mm height, 1500mm Length and 600mm width with 12mm thick glass planes and 18mm marine plywood and multi wood sheets of approved standard. All outer exposed surfaces should be concealed with teak wood veneer and inner surfaces of glazed area should be concealed with Mica sheets. glazed sliding opening and a proper locking system are to be provided. |
| 3 | od69470/2022_2023 : Providing and fixing Glazed showcase unit of size 1900mm height, 1500mm Length and width with 12mm quality glass and 18mm marine plywood and multi wood sheets of approved standard. All outer exposed surfaces should be concealed with teakwood veneer and inner surfaces of glazed area should be concealed with Mica sheets. An Aesthetic top roofing, glazed sliding opening and a proper locking system are to be provided. |
| 4 | od69471/2022_2023 : Providing and fixing of wooden carved main board of 2nd class teak wood, fully polished, including carving of letters in various sizes pre-approved by engineer-in-charge, finishing, transporting, hanging and all other conveyance charges included. |
| 5 | od69472/2022_2023 : Providing and supplying of wooden display stand made of anjili/pincoda wood 90cm height and 0.1 to 0.30 sqm top plank area, as per the design approved by Engineer-in-charge, fully polished and all other finishing works included. |
| 6 | od69473/2022_2023 : Providing and fixing of wooden stand photo frame made of anjili/pincoda wood, 0.5 to 0.9sqm size frames fully polished including fitting of picture and all finishing works etc. complete |
| 7 | RENOVATION AND REPAIR WORKS |
| 8 | 15.23.2 : Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles above 25 mm and up to 40 mm |
| 9 | 15.7.4 : Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar |
| 10 | 15.9.2 : Demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in- Charges:In cement mortar |
| 11 | 2.1.1 : Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil |
| 12 | 2.28.1 : Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil |
| 13 | od69474/2022_2023 : Providing and laying natural stone paver blocks with strong vibratory compaction, of<br>approved size, design & shape, laid in required colour and pattern over and including thick compacted bed<br>of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.<br> |
| 14 | od69475/2022_2023 : Providing and fixing Korean/Mexican grass turf throughout the gaps of Natural stone paver block pavement with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and even, including application of pesticides and watering for 30 days |
| 15 | 13.91 : Removing dry or oil bound distemper, water proofing cement paint and thelike by scrapping, sand papering and preparing the surface smooth includingnecessary repairs to scratches etc. complete. |
| 16 | 13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 17 | 13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer |
| 18 | 13.48.1 : Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm |
| 19 | 13.48.3 : Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Painting Steel work with Deluxe Multi Surface Paint to give an even shade.Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture |
| 20 | 13.48.2 : Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Painting wood work with Deluxe Multi Surface Paint of required shade.Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.75 ltr/10 sqm of approved brand and manufacture |
| 21 | 13.68.1 : French spirit polishing:Two or more coats on new works including a coat of wood filler |
| 22 | 13.67.2 : Varnishing with varnish of approved brand and manufacture :Two or more coats glue sizing with spar varnish or an under coat of flatting varnish |
| 23 | 13.97.1 : Painting with oil type wood preservative of approved brand and manufacture:Old work (one or more coats) |
| 24 | 13.70 : Floor polishing on masonry or concrete floors with was polish of approved brand and manufacture . |
| 25 | 15.2.1 : Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 26 | 4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) |
| 27 | 5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size |
| 28 | 5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete |
| 29 | 5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 30 | 4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 31 | 50.6.1.2 : Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete. |
| 32 | od69481/2022_2023 : Providing and laying Terra cotta floor tiles of size 225 x 225 mm or nearest available, laid on cement mortar 1:4 (1 cement:4 coarse sand) with 6mm open joints, gouted and pointed with cement mortar 1:2 (1 cement:2 fine sand) including Floor polishingwith wax polish of approved brand and manufacture, all complete. |
| 33 | Roofing Work |
| 34 | 15.14.1 : Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead:Of sectional area 40 square centimetres and above |
| 35 | 15.14.2 : Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead:Of sectional area below 40 square centimeters |
| 36 | 15.23.1 : Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm |
| 37 | 50.9.13.1 : Supplying and fixing Anjily wood wrought and put up for roof members including cost and conveyance of materials etc. complete . |
| 38 | 50.9.17.2 : Providing and Fixing Anjili wood frame work consisting of battens 50x25 mm fixed with rawlplug & drilling necessary holes and including priming coat etc complete |
| 39 | 13.57.1 : Painting with oil type wood preservative of approved brand and manufacture :New work (two or more coats) |
| 40 | 85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges |
| 41 | 10.25.2 : Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 42 | 50.10.1 : Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 43 | 50.10.2 : Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 44 | od69476/2022_2023 : Providing & fixing on roof pressed clay tile (Mangalore tile) of 22 mm nominal thickness and of approved size and as per approved pattern on wooden frame work complete (wooden frame work to be paid separately) |
| 45 | od69477/2022_2023 : Providing & fixing on roof pressed clay ceiling tile (Mangalore tile) of 22 mm nominal thickness and of approved size and as per approved pattern on wooden frame work complete (wooden frame work to be paid separately) |
| 46 | od69478/2022_2023 : Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 22 mm thickness and of approved pattern on wooden frame work complete (wooden frame work to be paid separately ). |
| 47 | od69479/2022_2023 : Providing & laying on roof pressed clay tile hip end (Mangalore tile) of 22 mm thickness and of approved pattern and design, all complete. |
| 48 | od69480/2022_2023 : providing and fixing of decorative wooden thoomanam of size 3 inches width or nearest, on tiling ends of the roof. |
AI Tender Summary
Tender Timeline
Jun 25, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJul 02, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 04, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender