}

Work Of Installation Decorative Post Top Lamp With Pole On Ghoda Nikas Road ( From Ramganj Chaupad To Char Darwaja ) Located In The Walled City Area Of Municipal Corporation Jaipur Heritage Year 2022-23 Work Of Installation Decorative Post Top Lamp With, jaipur-Rajasthan

Department Of Local Bodies has published Work Of Installation Decorative Post Top Lamp With Pole On Ghoda Nikas Road ( From Ramganj Chaupad To Char Darwaja ) Located In The Walled City Area Of Municipal Corporation Jaipur Heritage Year 2022-23 Work Of Installation Decorative Post Top Lamp With. Submission Date for this Tender is 11-07-2022. Cutting Crimping and Punching Tools Tenders in jaipur Rajasthan. Bidders can get complete Tender details and download the document.




Tender Notice

32818423
Corrigendum : Work Of Installation Decorative Post Top Lamp With Pole On Ghoda Nikas Road ( From Ramganj Chaupad To Char Darwaja ) Located In The Walled City Area Of Municipal Corporation Jaipur Heritage Year 2022-23 Work Of Installation Decorative Post Top Lamp With
Open Tender
Indian
Rajasthan
jaipur
11-07-2022

Tender Details

Work Of Installation Decorative Post Top Lamp With Pole On Ghoda Nikas Road ( From Ramganj Chaupad To Char Darwaja ) Located In The Walled City Area Of Municipal Corporation Jaipur Heritage Year 2022-23 Work Of Installation Decorative Post Top Lamp With Pole On Ghoda Nikas Road ( From Ramganj Chaupad To Char Darwaja ) Located In The Walled City Area Of Municipal Corporation Jaipur Heritage Year 2022-23 , ( E040106 ) Supplying And Drawing Fr Pvc Insulated & Unsheathed Flexible Copper Conductor As Per Pwd Specification For Electrical Works With Isi Marked ( Is:694 ) And As Per Is 8130 : 2013 Of 1.1 Kv Grade . Wire Should Be Made From 99.99% Purity Copper, Class 5 Stranding In Acc. To Iec 60228 For Lower Watt Loss , Oxygen Free ( <10 Ppm ) For Less Chances Of Oxidization And Higher Silver Content For Gives Better Conductivity , Insulation Pvc Type A Or C , Flame Retardant As Per Is 10810-53, Better Amperage Rating As Per Vde 0298 Part 4, In Existing Surface Or Recessed Pvc / Ms Conduit / Casing Capping Including All As Per Pre Approved By Engineer In Charge, Making Connections, Etc. As Required. Oem Must Have Its Own In House Nabl Lab Setup For All Testing Facilities For Wires. For Additional Technical Parameters Of Products / Work , Refer Annexure A Attached With This Bsr . 2 X 2.5 Sq.Mm , ( E110100 ) Providing & Laying P.V.C. / Xlpe Insulated & P.V.C. Sheathed Unarmoured / Armoured Aluminium Cable Of 1.1 Kv Grade As Per Pwd Specification For Electrical Works In Existing Rcc / Hume / Stoneware / Pvc Pipe / Open Duct / Cable Trench With Filling Of Excavated Earth In Trench , On Existing Cable Trays Or On Surface Etc. Including Making Necessary Connection, Testing Etc. As Required Of Size And As Per Points ( A ) , ( B ) , ( C ) , Mentioned Below:- ( A ) Material :- H4- Grade Aluminium Conductor Of Purity >99.6 % & As Per Is:1554 P-I / Is :7098 P – I ( B ) Conductor Shall Have Electrolytic Aluminium Confirming To Is 8130, Is 3975-1999 For Armouring Of Cables In Armoured Cable Items , Is 5831 For Sheath, Is 10810 ( Part 0 To 64 ) For Testing Procedures. ( C ) Oem Must Have Iso 9001 & 14001 Certifications For Quality Assuarance & Its Own In House Nabl Lab Setup For All Testing Facilities For Cables . Appropriate Type Test Certificate / Oem Test Report Shall Be Submitted . All Above As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products / Work , Refer Annexure A Attached With This Bsr. , ( E110133 ) 10.0 Sq. Mm , ( E110133a ) 2 Core , ( E110134 ) 16.0 Sq. Mm , ( E110134d ) 4 Core , ( E120100 ) Supplying And Making One End Termination With Heavy Duty Brass Compression Gland ( As Per Is 12943- 1990 ) Sibg Type, Heavy Duty Aluminium Lugs ( As Per Is 8309 -1993 & Is 8337-1976 ) Duly Crimped With Crimping Tool, Pvc Tape As Per Pwd Specification For Electrical Works Etc For Following Size Of Armoured Pvc Insulated & Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1100 Volt Grade As Required Of Size. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products / Work , Refer Annexure A Attached With This Bsr . , ( E120139 ) 4 X 25.0 Sq.Mm , ( E120138 ) 4 X 16.0 Sq.Mm , ( E140514 ) Sitc Of Chemical Gel Earthing System Of Dual Pipe Technology Made Of With B Class G I Pipe As Per Is 1239 ( Part-1 ) :2004 Of Medium Duty Of Following Sizes As Per Points Mentioned ( A ) , ( B ) , [ C ) , ( D ) , ( E ) Below :- ( A ) Filled With Anti Corrosive Conductive Compounds With The Permanent Sealings At Both The Ends, Cpri / Erda Tested With Rms Capacity Of Minimum 35- 40 Ka For Withstanding 1 Second . ( B ) To Ensure The Moisture Content And Electrical Conductivity, 25 Kg For 2000 Mm & 50 Kgs For 3000Mm Of Resistance Lowering Earth Enhancement Material Shall Be Used As A Backfill Compound. The Compound Shall Be Tested Form Nabl Acredeated Lab For Low Resistivity ( Less Than 0.12 Ohm - Meter ) & High Conductivity In Nature With Carbon As A Major Content As Per Referance Of Is 3043-1987, Ieee 80-2013 ( Clause 14.5D ) , Ieee 837 & Ier 1956 With Latest Amendemnts ( C ) Heavy Duty Weather Proof Poly-Propylene Earth Pit Chamber With Lockable Jam Free Lid Suitable For Safe Working Load 5000 Kg Or More Of Size Top Dia. 225 To 260 Mm, Bottom Dia 300 To 350 Mm. And Height 250 To 300 Mm. ( D ) Testing Of Earth Resistance For Value Of 5 Ohms Or Less As Required & Must Record By Engineer In Charge During Site Visit And Ensure To Enter In Measurment Book. ( E ) Self Certificate For Confirming Above Standards From Oem Is Mandatory. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products / Work , Refer Annexure A Attached With This Bsr . With Pipe In Pipe Technology ( Outer Pipe Dia. / Inner Pipe Dia. ) Minimum 100 Mm Dia Borewell Gi Pipe 3000 Mm Long, 80 / 50 Mm, Terminal 50Mm X 6Mm Gi Strip , ( E140702 ) Supply & Laying Following Size Earth Wire In Horizontal Or Vertical Run In Ground / Surface / Recess Including Riveting, Soldering, Saddles, Making Connection With Gi / Cu Thimble Etc. As Required. All As Per Pre Approved By Engineer In Charge. For Additional Technicalparameters Of Products / Work , Refer Annexure A Attached With This Bsr . 8 Swg Copper Wire , ( E210411 ) Providing & Fixing Of Hdpe Pipe Isi Mark ( Is:4984 / 2016 ) For Water Supply ( Suitable For Submersible & Jet Pump ) With Required Fittings Ie Socket, Elbows, Tee Etc. Complete In All Respect. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products / Work , Refer Annexure A Attached With This Bsr . For Vertical Installation 40 Mm Od 6 Kg / Cm2.

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 04-Jul-2022 DateCorrigendum Date 11-07-2022

Key Value

Document Fees
INR 500 /-
EMD
INR 108894.0 /-
Tender Value
INR 54.44 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail