|
| 1 | Wiring for light point/ fan point/ exhaust fanpoint/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single corecable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single corecable etc as required. |
| 2 | Group C |
| 3 | Supplying and fixing of following sizes ofsteel conduit along with accessories insurface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit asrequired. |
| 4 | 25 mm |
| 5 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, singlecore cable in the existing surface/ recessedsteel/ PVC conduit as required. |
| 6 | 3 x 4 sq. mm |
| 7 | Supplying & fixing suitable size GI box wihmodular plate and cover in front on surface orin recess including providing and fixing 25 Amodular socket outlet and 25 A modular SP MCB, “C” curve including connections, painting etc. as required. |
| 8 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. |
| 9 | 8 Module (125 mmX125 mm) |
| 10 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 11 | 15/16 A switch |
| 12 | 6 pin 15/16 A socket outlet |
| 13 | Supply and replacement of the following materials for 300 KLD STP i/c dismantled of old & credit buy back of olddismantled as and where basis etc as required. |
| 14 | Bio Culture |
| 15 | Media Size- 16 x 22 mm |
| 16 | Rewinding and repairing of defective Mono Block motor of 10 HP capacity, 415Volt, 3 Phase , 50Hz AC with proper insulation including replacement of bearings, terminal plate etc. including dismantling and Charges to take site to workshop and workshop to site for repairing, re-installation, testing & commissioning the motor and buyback of burnt copper wire/Bearing complete etc. as required. |
| 17 | Supplying and laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size in existing wall etc as reqd. |
| 18 | 3.5 x 50sqmm |
| 19 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. |
| 20 | 200 A, 36kA, FPMCCB |
| 21 | 400 A, 50kA, FPMCCB |
| 22 | Supply and Fixing ML-6 Heavy Duty 3 pole Contactor with 2NO+2NC Aux contact in existing Feeder pillar/Panel including replacement of worn /burnt out control wirng, thimbles etc complete as reqd. |
| 23 | Replacement of 1.5/2 TN inverter PCB in existing indoor/Outdoor unit complete as reqd. |
