Construction Of New Common Toilet Block Of New Mess Block At Hirmi Kurukshetra.
Tender Value
4.25 Lakhs
Estimated cost
Bid Submission
15 Jul 2022
0 days left
EMD
4250
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
dhand → Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of New Common Toilet Block Of New Mess Block At Hirmi Kurukshetra.
BOQ
| Sl. No. | Item Description |
| 1 | Works Details |
| 2 | Earth Work in Excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cmin depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in-charge.HSR 4.14 |
| 3 | PCC 1:4:8 (1 Cement: 4 coarse sand (zone-III): 8 graded stone aggregate 40 mm nominal size) HSR 6.1.6 |
| 4 | Providing and laying of base course of floors consisting of 100 mm thick cement 1:8:16 and 100 mm sand or stone filling. HSR 10.1 |
| 5 | Brick work with common burnt clay non-modular bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement: 6 coarse sand). HSR 7.21.2 |
| 6 | Brick work with common burnt clay non-modular bricks of class designation 7.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in:Cement mortar 1:6 (1 cement: 6 coarse sand) HSR 7.22.2 |
| 7 | Pointing on brick work or brick flooring wih cement mortar 1:3 ( 1 cement : 3 fine sand ): Raised and cut pointing. HSR 11.25.2 |
| 8 | Providing & laying in position specified grade of reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3graded stone aggregate 20 mm nominal size ) HSR 6.14.1 |
| 9 | Centering & Shuttering including strutting, propping etc. and removal of form work for suspended floors, roofs, lanings, balconies. HSR 6.30.3 |
| 10 | Cement mortar 1:4 ( 1 cement : 4 coarse sand ) HSR 7.9 |
| 11 | Providing and laying pressed clay tiles on roof jointed with cement mortar 1:4 mixed with 2% integral water proofing compound laid over a bed of 20 mm thick cement mortar 1:4 and finished neat complete. HSR 9.15 |
| 12 | Provding gola 75x75 mm in cement concrete 1:2:4( 1 cement : 2 coarse sand : 4 stone aggregate 10 mm and d own gauge), including finishing with cement mortar 1:3 ( 1 cement : 3 fine sand )as per standard design : (a) Size of ceremic glazed tile 200x300mm . HSR 9.17 |
| 13 | Providing and laying Ceramic glazedfloor tilesof size 300x300 mm. HSR 10.57 |
| 14 | Providing & laying 6 mm thickPOP coating on walls, ceiling, beams and lintels etc. HSR 11.57 |
| 15 | Providing & fixing 1st quality ceramic glazed wall tiles conforming toIS :15622. HSR 10.58 |
| 16 | 12 mm cement plaser of mix 1:4 ( 1 cement : 4 fine sand ) HSR 11.5.3 |
| 17 | Providing & fixing aluminium Work for doors, windows, ventilators and partitions of powder coated aluminium ( min. thickness of powder coating 50 micron). HSR 12.157.1.2 |
| 18 | Providing & fixing 12 mm thick prelaminated particle board with decorative lamination n both sides. HSR 12.158.2 |
| 19 | Providing & fixing glazing in aluminium door, window, ventilators shutters and partitions etc. with float glass panes of 6 mm thickness. HSR 12.159.3 |
| 20 | Steel Reinforcement for R.C.C. work (cold twisted bars). HSR 6.34.3 |
| 21 | Providing & placing polyethylene water storage tank on terrace. HSR 22.181 |
| 22 | C.P.V.C. Pipes 20 mm nominal outer dia. HSR 22.85.2 |
| 23 | C.P.V.C. Pipes 25 mm nominal outer dia. HSR 22.85.3 |
| 24 | Providing & fixing C.P. brass angle valve of 15 mm nominal bore. HSR 22.108 |
| 25 | Providing & fixing C.P. brass long nose bib cock of approved qualiy weighing not less than 810 gms of 15 mm nominal bore. HSR 22.105 |
| 26 | Providing & fixing in position vitreous chinaware white lavatory suites of size 550 mm x 400 mm x 815 mm. HSR 22.221.2 |
| 27 | Providing & fixing white vitreous chinaware battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water. HSR 22.46 |
| 28 | Providing & fixing white vitreous Chinaware partition plate of size 680 mm x 330 mm. HSR 22.50.1.1.1 |
| 29 | W.C. pan with ISI marked white solid plastic seat & lid. HSR 22.24.1 |
| 30 | Providing & fixing 600 x 450 mm bevelled edge mirror of superrior glass. HSR 22.209 |
| 31 | Provding & fixing P.V.C. waste pipe of 40 mm dia. HSR 22.14.1.2 |
| 32 | Providing & fixing aluminium handles 125 mm. HSR 12.102.1 |
| 33 | Providing & fixing aluminium tower bolts 250 x 10 mm. HSR 12.99.2 |
| 34 | PVC Pipe 200mm (HDPE) . HSR 21.96.1 |
| 35 | Providing & fixing 40 mm i/d chromium plated brass \"P\" trap Or \"S\" Trap. HSR 22.17.2 |
| 36 | Providing & fixing ISI marked aluminium butt hinges anodised 100x75x4 mm. HSR 12.97.3 |
| 37 | Providing & fixing aluminium die cast body tubular type universal hydraulic door closer. HSR 12.88 |
| 38 | Wiring for Light/Fan/Call bell point with modular type switch/socket and GI box. (Group A) HSR 23.4.1.1 |
| 39 | Wiring for Light/Fan/Call bell point with modular type switch/socket and GI box. (Group B) HSR 23.4.1.2 |
| 40 | Wiring for Light/Fan/Call bell point with modular type switch/socket and GI box. (Group C) HSR 23.4.1.3 |
| 41 | Providing & fixing 15 amp. 1 way switch. HSR 23.8.11.3 |
| 42 | Providing & fixing 15 amp 6 pin Socket. HSR 23.8.11.5 |
| 43 | Supply & erection of MCB (Miniature circuit Breaker)240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp. single pole. HSR 23.22.5.1 |
| 44 | Supply & erection of PVC CONDUIT of 25 mm dia. Pipe. HSR 23.7.6.2 |
| 45 | 1 run of 1.50 Sqmm size wire. HSR 23.5.6.1 |
| 46 | Erection of Exhaust Fan. HSR 23.9 |
| 47 | Erection of wall/cabin Fan. HSR 23.10 |
| 48 | Fixing of LED Tube light. HSR 23.20 |
| 49 | Supply of 250 mm x 250 mm Exhaust Fan of Havells make. HSR 20.72 |
| 50 | Supply of 400 mm Wall Fan of Havells make. HSR NS |
| 51 | Supply of 36 W Light of Havells make. HSR NS |
AI Tender Summary
Tender Timeline
Jun 24, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 15, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender