Public Works Department-PWD has published Providing And Fixing Steel Shed For Electrical Sub Station And Concertina Coil Fencing In District Level Office Building Of Excise And Taxation Department In Sector – 32 In Gurugram District. Submission Date for this Tender is 18-07-2022. Electrical Substation Tenders in gurugram Haryana. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5m in width or 10sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. (HSR:4.14.1_2021) |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work upto plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) (HSR:6.1.6_2021) |
| 3 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) (HSR:6.14.1_2021) |
| 4 | Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns (HSR:6.29.1_2021) |
| 5 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. (HSR:6.33.6_2021) |
| 6 | Structural steel work riveted, bolted or welded in builtup sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (HSR:13.28_2021) |
| 7 | Providing and fixing bolts including nuts and washers complete. (HSR:13.32_2021) |
| 8 | Providing and fixing galvanised wiremesh of average width of aperture 1.4mm and nominal dia of wire 0.63mm fixed on steel windows of standard rolled steel section, with 3mm thick MS flat iron covermoulding of 12.5 mm width, fixed with machine screws welded complete in all respects. (HSR:13.19_2021) |
| 9 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) 0.50mm (+0.05%) total coated thickness with zinc coating 120grams per sqm as per IS:277, in 240m paste elgrade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied ins ingle length upto 12metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling / self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal / vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (DSR:12.50) |
| 10 | Applying priming coat With readymixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron / steel works (HSR:11.68.3_2021) |
| 11 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90litre/10 sqm over an under coat of primer applied @ 0.80 litre/10 sqm of approved brand and manufacture (HSR:11.97.3_2021) |
| 12 | Providing & fixing concertina coil fencing with punched tape concertina coil 600mm dia 10 metre openable lenth (total lenth 90m), having 50 no. rounds per 6 metre length, upto 3m. Height of wall with existing angle iron "Y" shaped placed 2.4m. Or 3.00m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engneer-in-charge, with reinforced barbed tape (R.B.T)/ Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52mm thick) and weight 43.478gm/metre (cost of M.S. angle, C.C. blocks shall be paid seprately (DSR:16.53) |
| 13 | Providing and fixing M.S. angle 50x50x5 mm to act as nosing with lugs of M.S. flat 10x5 mm, 10 cm long, forked at end 60cm apart (minimum three lugs to be provided), including necessary welding and applying a priming coat of approved primer on exposed surface etc. complete.(HSR : 10.56_2021) Boundary Wall |
| 14 | Core cutting (for angle)up to 200mm RCC slab - 100mm dia (HSR:PH229_2021) |
| 15 | Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over (BIS 15658:2006) and including 50 mm thick compacted bed of coarse sand, filling the joints with lines and etc. all complete as per the direction of Engineer-in-charge. (HSR: 10.76_2021) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
