Supply Of Vertical Juice Heater E-Tender For Juice Heater , Supply Of Vertical Tubular Juice Heater ( Without Tubes ) Having Heating Surface Of 285 M2, Shall Be Multiple Circulation Type, Designed To Have Juice Velocity Between 1.8 M / Sec. To 2.0 M /, morinda-Punjab

Supply Of Vertical Juice Heater E-Tender For Juice Heater , Supply Of Vertical Tubular Juice Heater ( Without Tubes ) Having Heating Surface Of 285 M2, Shall Be Multiple Circulation Type, Designed To Have Juice Velocity Between 1.8 M / Sec. To 2.0 M / Sec. At Crush Rate / Juice Flow Rate Of 115 M³ Juice / Hour.The Body Shell Must Be Of Made From 12Mm Thick M.S. Plate. Both Cover Plates Should Be Made From Atleast 32Mm Thick Ms Plate Provided With Suitable Stiffeners. The Tightening Arrangement For Covers Should Have T Type Constructions. Tube Plates From 25Mm Thick Mild Steel Plate, Juice Heater Should Be Provided With Easy Opening & Boxing Up Device To Open Both Cover Plates At A Time For Juice Cleaning.Drain Cocks Should Be Provided In Bottom Cover And Air Venting Connection With Cocks In Top Cover For Each Compartment. Proper Ammonia Connection By Providing 2” Dia Coil For Heavy And Light Non-Condensable Gases Exposure To Atmosphere Separately With Separate Control Valves. The Tube Plate Should Be Properly Drilled & Reamer Finished To Fit 45Mm Od X 1.21Mm X 4000Mm.S.S. Tubes The Thickness Of Partition Plate & Header Plate Shall Not Be Less Than 12 Mm. A Square Bar Of 1¼ “ ( 30 Mm ) With Dove Tail Grooves Should Be Welded Over The Partition Plates To Fix Rubber Packing Of 12 Mm. The Juice Heater Should Be Provided With Two Condensate Outlet Each Having Dia Of 4” And One Double Beet Valve Of 8” Dia To Operate It On Vapour Line Juice Heating. The Ligament Of Tubes Should Be Minimum 12Mm. Suitable Condensate Withdrawal Point Should Be Provided. The Detail Specification Of Juice Heater Tubes, Heating Surface & Juice Velocity Once Again Mentioned As Under : -S.S. Tubes- 45Mm Od X 1.21Mm Thick X 4000Mm Long -Ligament Of Tube- 12Mm ( Minimum ) -Heating Surface Of Juice Heater - 285 M² Juice Velocity 1.8 - 2.0 M / Sec At Juice Flowrate Of 115 Cubic Meter Per Hour Before Finalizing The Order You Have To Submit The Drawing Of The Equipment Within 10 Days From The Date Of Negotiation For Approval.

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	04-Jul-2022	Corrigendum	Date	11-07-2022
2	11-Jul-2022	Corrigendum1	Date	18-07-2022
3	18-Jul-2022	Purchase	Date	25-07-2022
4	25-Jul-2022	Purchase1	Date	27-07-2022

INR 100 /-

INR 15000.0 /-

Refer document