Supply And Installation Of 1Nos Of 9 Meter Minimast Light With 5Nos Of 150W Led Flood Lights At Peedikamukku, Oralassery, Palakkaparambu In Ward 10 And 11 Of Thirivilwamala Gp In Chelakkara Lac, Thrissur District. Supply And Installation Of 1Nos Of 9 Mete
Tender Value
2.09 Lakhs
Estimated cost
Bid Submission
01 Jul 2022
0 days left
EMD
5248
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
chelakkara → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Supply And Installation Of 1Nos Of 9 Meter Minimast Light With 5Nos Of 150W Led Flood Lights At Peedikamukku, Oralassery, Palakkaparambu In Ward 10 And 11 Of Thirivilwamala Gp In Chelakkara Lac, Thrissur District. Supply And Installation Of 1Nos Of 9 Meter Minimast Light With 5Nos Of 150W Led Flood Lights At Peedikamukku, Oralassery, Palakkaparambu In Ward 10 And 11 Of Thirivilwamala Gp In Chelakkara Lac, Thrissur District.
BOQ
| Sl. No. | Item Description |
| 1 | 90.15.1.2Supply installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet70mm top diameter. 155 mm bottom diameter thickness 3mm base plate dimensions of 250x250x16 mmsuitable for windspeed as per IS 875 Part III fixed head frame including round arm luminary carriagesuitable to install 4/6 nos luminaries in symmetrical arrangement including connector foundation bolt 4nos fixed in existing RCC foundation adn junction box etc, complet 9 Meters |
| 2 | 90.15.4.9Supply Conveyance, installation, testing and commissioning of 150W LED Flood light output greater than105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factorgreater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-castPowder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98,RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatlyaccessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be producedmentioning chip manufacturer) |
| 3 | 90.14.3.2Supply and providing heavy duty \"A\" section neoprene gasket in the panel boardU\" section rubber beedingsuitable for 1.60/ 2.00 mm sheet |
| 4 | od361803/2021_2022Supply and fixing of 2 nos.of 25A 3 Pole AC 1 rated power contactor, Selector switch for motor control,supply and fixing flush head push button NO-NC and 2.5 sq. mm ISI sq. mm ISI marked FRLS PVCinsulated single core copper conductor cable, 1.5 sq. mm ISI marked FRLS PVC insulated single corecopper conductor cable.A.25A 3 Pole AC 1 rated power contactor - 2 eachB.2.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable- 5 metreC.Selector switch for motor control- 1 eachD. Supply and fixing flush head push button NO-NC - 2 eachE. 1.5 sqmm ISI marked, FRLS PVC insulated, single copper conductor cable- 6 metreF. Labour Charges |
| 5 | od361804/2021_2022Supply and fixing of 2 nos. of 25A 2 Pole AC 1 rated power contactor, 25A Connector, 2 nos. of Digitaltimer, Suitable Copper socket, 2.5 sq. mm ISI marked FRLS PVC insulated single core copper conductorcable, 1.5 sq. mm ISI marked FRLS PVC insulated single core copper conductor cable, OBO Bettermannmakes V25-B+ C/1+ NPE (switching/lightning protection) for single-phase protection.A. 25A 2 Pole AC 1 rated power contactor - 2 eachB. 25A Connector- 1 eachC. Digital timer- 1 eachD. Suitable Copper Socket- 4 eachE. 2.5sqmm ISI marked, FRLS PVC insulated, singke core copper conductor cable- 8metreF. OBO Bettermann makes V25-B+ c/1+ NPE(switching/lighting protection) for single phase protection- 1 eachG.1.5sqmm ISI marked, FRLS PVC insulated, single core copper conductor cable- 6 metreH. Labour Charges |
| 6 | od361805/2021_2022Supply and fixing HRC fuse base of 20/32A using suitable nut and bolt, 32A 2-way neutral links mountedon DMC/SMC base and 2.5 sq. mm ISI marked FRLS PVC insulated single core copper conductor cable.A. HRC fuse base of 20/32A using suitable nut and bolt- 1 eachB. 32A 2 way neutral links mounted on DMC/SMC base- 1 eachC.2.5sqmm ISI marked,FRLS PVC insulated, single core copper conductor cable- 3metreD. Labour Charges |
| 7 | 90.14.5Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panelboard |
| 8 | 2.14.2Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual currentcircuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete withconnections, testing and commissioning etc. as required.40 amps |
| 9 | 2.10.3Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breakersuitable for inductive load of following poles in the existing MCB DB complete with connections, testingand commissioning etc. as required.Double pole |
| 10 | 2.10.1Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breakersuitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole |
| 11 | 2.12.1Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB completewith connections, testing and commissioning etc. as required.40 amps |
| 12 | 90.6.5.11Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 Vgrade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface /recess conduit as required including giving necessary connections of the following sizes.3 core 1.50 sqmm |
| 13 | 5.3Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, andprovidingmasonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc.(but without charcoal/ coke and salt ) as required. |
| 14 | 90.16.4.2Supply and clamping the following sizes of strips on surface of wall / parapet/ existing cable tray usingclamps fabricated from 20 x3 mm GI flat duly painted or heavy duty GI spacer saddles, spacing of clampsnot exceeding 1 m , making good the damages, colour washing etc. as required ( for vertical run).25 x 3mm GI strip |
| 15 | 90.16.1.3Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and givingconnection as required3.15 mm copper conductor ( 10 SWG) |
| 16 | 90.16.5.3Supply of superior quality copper earth socket for the following size of earth conductor including crimpingetc. as required.3.15 mm (10 SWG) |
| 17 | 90.12.5.3Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe asrequired.2 core 10 sq mm |
| 18 | 90.12.9.2Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out ofHDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with allrequired accessories in ground in the existing trench50/38 mm or nearest size21 |
| 19 | 9.1.2Supplying and making end termination with brass compression gland and aluminium lugs for followingsize of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade asrequired.2 X 10 sq. mm (19mm) |
| 20 | od361806/2021_2022Charges for KSEB connection including all laison works (Actual Amount paid on production of receipt). |
| 21 | 2.6.1Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas(exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavatedearth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds ofsoil |
| 22 | 4.1.8Providing and laying in position cement concrete of specified grade excluding the cost of centering andshuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40nominal size) |
| 23 | 5.9.1Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases ofcolumns, etc for mass concrete |
| 24 | 5.22.6Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position andbinding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 25 | 5.1.2Providing and laying in position specified grade of reinforced cement concrete, excluding the cost ofcentering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarsesand :3 graded stone aggregate 20 mm nominal size |
| 26 | 13.1.112 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 27 | 2.25Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers notexceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m |
| 28 | od361802/2021_2022Fabrication ,supply, conveyance and installation of Granite name board indicating the cost involved, thecommencement, completion and inauguration date etc. |
AI Tender Summary
Tender Timeline
Jun 24, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJul 01, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 02, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender