Providing Laying Water Line From Recycling Plant To Rising Main Office Hp-I At Haiderpur Ww.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
30 Jun 2022
0 days left
EMD
22500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing Laying Water Line From Recycling Plant To Rising Main Office Hp-I At Haiderpur Ww.
BOQ
| Sl. No. | Item Description |
| 1 | Providing 1.6 Mtr.high corrugated G.I. sheet barricading supported on safeda ballies 100 mm dia. 2 mtr. High placed at 2.5 M C/C Corrugated G.I. sheets fixed with nails of required legth and dia. To safeda ballies including excavating holes of size 0.30x0.30x0.30 m gating out the excavated soil and then riturning the soil including consolidating by ramming and watering etc. all complete including disposal of surplus earth within lead of 50 mt. lift upto 1.50 mt and painting on full surface of G.I sheets on one side with bright paint of red and white colour in vertical strips 0.30 mt. wide alternatively as directed by engineer- in -charge. |
| 2 | Cutting of bituminous road and taking out soiling,metalling i.e. sorting screening and stacking within 50 mtr. Lead i/c cost of barricading and chowkidar. |
| 3 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 4 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal or unserviceable material within 50 metres lead as per direction of Engineer in charge.In cement mortar. |
| 5 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil |
| 6 | Labour for cutting C.I. pipe with steel saw. 100 mm dia |
| 7 | Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 :Excluding excise duty component100 mm dia |
| 8 | Providing and fixing C.I. sluice valves (with cap) complete with bolts,nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 100 mm diameter Class I |
| 9 | Providing and laying D.I. specials of class K-12 suitable for push-on jointing as per IS : 9523 : Excluding excise duty componentUp to 600 mm dia |
| 10 | Providing and laying D.I. Specials of Class K - 12 suitable for mechanical jointing as per IS : 9523 : Excluding excise duty component Up to 600 mm dia |
| 11 | Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and the cost of rubber gasket : 100 mm dia |
| 12 | Hire charges of pump set of capacity @4000 ltr. Per hour including cost of services of operating staff and supply of lubricating |
| 13 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 14 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 20 mm dia nominal bore |
| 15 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20 mm nominal bore |
| 16 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level. 1:4:8(1 cement : 4 coarse sand : 8 graded stone aggregate 20 mm nominal size) |
| 17 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 18 | Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in : Cement mortar 1:4 (1 cement : 4coarse sand) |
| 19 | 12 mm cement plaster of mix : 1:4 (1 cement : 4 coarse sand) |
| 20 | P/FC.I.D joints to A.C pressure pipe or plain ended C.I special complete with nut bolts rubber ring and coller without excise duty 100 mm dia. |
| 21 | Carriage of material By Mechanical Transport including loading ,unloading and stacking Lime, moorum, building rubbish 3km |
| 22 | Providing house service connection from old to new water distribution main upto water meter which includes providing and fixing of composite strap saddle having outer body of non corrosive engineering plastic (MDPE) moulded with SS304 threaded metal insert for tapping distribution main with 8mm bore size, saddle seal / gasket of SBR grade 30/NBR, strap of plastic with integrated bolt and nut SS202 etc., having total minimum weight of 0.565kg.,PP compression male threaded metal insert elbow 90 dgree, female threaded adopter with one sided compression, GI pipe of class \"B\" confirming to relevant IS code of 15mm nominal bore with all fittings upto 1.5m length for above ground and MDPE pipe of minimum PE-80 grade PN-16 Size of20mm OD upto 4 m lengthwith all fittings i/c compression elbow underground portion complete in all respect as per the directions of Engineer-in Charge. |
| 23 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 15 mm dia nominal bore |
| 24 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 15 mm nominal bore |
| 25 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality Rectangular shape 600x450 mm internal dimensions |
| 26 | Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces,tapers etc if required will be paid separately) : 50 mm dia |
AI Tender Summary
Tender Timeline
Jun 23, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJun 30, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 30, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender