|
| 1 | De-tensioning of the belt by removing counter weight from take-up/lifting the take-up system/lifting of counter weight by chain pulley block/crane, opening \"C\" clamps of wire ropes of take-up system & normalizing the system and other associated work. |
| 2 | Dismantling of skirt board of MBF and reassembly of the same with proper alignment after completion of work. |
| 3 | Tensioning of belt for vulcanizing including all the rigging works. This also includes removal of idlers & structures required for carrying out work of jointing. Refitting of same after work is completed. |
| 4 | Jointing of belt by hot vulcanizing process.( Splicing of conveyor belt & jointing the belt Pieces) |
| 5 | Jointing of belt cold vulcanizing process (Splicing of conveyor belt & jointing the belt Pieces) |
| 6 | Repairing of conveyor belt by cold/hot vulcanizing process repair may be for belt cover, internal plies or edge of belt. |
| 7 | Removal of old & damaged belt & shifting of the same to the scrap yard / stack yard along with other scraps. |
| 8 | Repositioning of folded belt on take-up/tail pulley or other pulleys of conveyor & MBF along with its associated work |
| 9 | Laying of new / old / repaired belt kept in rolled drum |
| 10 | Transportation of conveyor belt from departmental store to the different site of conveyor. |
| 11 | Repair of sealing belt of bunkers/mobile head/MBF by spot patching. |
| 12 | Jointing of cut/damaged sealing belt of bunkers/mobile head/MBF / obturation belt by vulcanizing process including all associated works. |
| 13 | Laying of sealing belt (old/existing) collecting from any point of bunker bay due to breaking of belt or laying new belt. |
| 14 | Repairing of conveyor belt havingstraight longitudinal cut by removing top rubber & one / two ply in 250-300 mm width equally spaced on both sides of cut and pasting a piece of required length having top rubber and one / two ply and width 250-300 mm by cold / hot vulcanizing process /strengthening of conveyor belt havingstraight longitudinal joint up to size 250x1600 mm. |
| 15 | Replacement of belt (L 8250 mm x W1000 mm) of magnetic separators with all associated work / replacement of sealing Belt of MBF/MH after it’s preparation. |
| 16 | Repairing of spot repair vulcanizing machine as per scope of work |
| 17 | Repairing of Hydraulic vulcanizing machine including servicing of the jack & control box as per scope of work. |
| 18 | Lagging/Lining of different pulleys of CHP |
| 19 | Fixing of rubber lining on various pulleys of CHP by cold process with all the necessary allied work such as de-tensioning of belt, normalization and successful trial run of pulley as per scope of work. |
| 20 | Rubber lagging with 16mm herring bones/ diamond grooved neoprene rubber having shore hardness 75º + 5º on drive pulley installed in CHP of 2X500MW with all the necessary allied work such as de-tensioning of belt, removal of hood etc. normalization and successful trial run of belt as per scope of work. |
