Comprehensive Maintenance Of Smq Of B And R Works At Nandini Complex, Pushp Vihar, Single Offr Living And Pump House At Af Stn Bhisiana As Per Boq / Price Schedule
Tender Value
Ref. Documents
Estimated cost
Bid Submission
28 Jul 2022
0 days left
EMD
42600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bhisiana → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Comprehensive Maintenance Of Smq Of B And R Works At Nandini Complex, Pushp Vihar, Single Offr Living And Pump House At Af Stn Bhisiana As Per Boq / Price Schedule
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 08-Jul-2022 | Amendment to Critical date | Date | 21-Jul-2022 |
| 2 | 21-Jul-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 28-Jul-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down Cement Plaster including raking out Joints, hacking for Key, scrubbing down with Water and removing Debris, etc. to Outside MD/AF Land, complete all as specified and as directed. |
| 2 | M&L Rendering (External) 15mm thick in Cement Mortar 1:4 on Brick Walls/Concrete Surfaces mixing with WPC as per Manufactures instruction, plastered surfaces finished Even and Fair without using Extra Cement, complete all as specified and as directed.NOTE : WPC shall be Measured and Paid for as ‘Supply only’ separately under appropriate Item. |
| 3 | Supply only Integral Water Proofing Compound, conforming to IS and/or as approved, complete all as specified. |
| 4 | M&L for 15 mm thick, cement plaster in CM (1:6) on fair faces of brick or concrete on wall surfaces and finishing the surface even and smooth (without using extra cement) etc,complete all as specified as directed by engr-in-charge |
| 5 | M&L for 5 mm thick cement plaster in CM (1:3) on fair faces of concrete surfaces as in ceiling and finishing the surface even and smooth (without using extra cement ) etc, complete all as specified and as directed. by engr-in-charge |
| 6 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. |
| 7 | M&L Preparing Newly Plastered Surfaces of Ceiling and applying Three Coats of White Wash, complete all as specified and as directed. |
| 8 | M&L preparing New Plastered Surfaces of Walls by applying a Coat of Wall Care Putty including rubbing down with Sand Paper to obtain a smooth finish surface and applying Two Coats of Distemper Oil Emulsion (as approved) over a Coat of Primer, complete all as specified and as directed. |
| 9 | Demolition Brick work built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc., complete all as specified and as directed. |
| 10 | M&L Brick Work with Sub-Class ‘B’ Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed. |
| 11 | Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing) and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed. |
| 12 | Material and labour for Screed bed or bedding layer of mortar (1:6) ,15 mm thick for laying floor finishes complete all as specified and as directed. |
| 13 | Material and labour Rendering 10 mm thick cement plaster 1:4 on fair faces of brick work or concrete surfaces, including finishing the surfaces even andfair to receive the wall tiles etc all as specified and as directed. |
| 14 | M&L for Non-skid Coloured Ceramic joint free Tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceedig 0.06 Sqm but not exceeding 0.11 Sqmin Flooring, set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including Screed or Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed.NOTE : Cost of Cement Screed Bed shall be measured and paid under respective items. |
| 15 | Material and labour for Glazed Ceramic Colouredtiles of size 350mmx250mmx7 mm/ 450/350/7mm thick thick on vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour oftiles compete all as specified and as directed. |
| 16 | Material and labour for Joint free light shade vitrified tiles 10 mm thick (square /rectangular) polished, area of each tile not exceeding 0.38 sqm, in floors/ skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified. |
| 17 | Dismantling Stone Slabs and/or Tiles of any description or thickness in Floors, Aprons, etc. laid, bedded and pointed in Cement Mortar and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed. |
| 18 | M&L Granite (of any type) Tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement and admixture of pigment to match the shade of granite stone including grinding, polishing and including 10mm thick Screed or Screed Bed in Cement Mortar 1:3 complete all as specified and as directed.NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate. |
| 19 | Demolition Cement Concrete (un-reinforced) of in Ground & Pavings. not exc. 150mm thickness (below or above Ground Level) and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed. |
| 20 | M&L for Cement Concrete 1:3:6, type C-1 (20mm graded stone aggregate) 75mm thick as in Plinth Protection, finishing Cement Concrete surface Even and Smooth without using Extra Cement, including making joints 12mm wide upto total depth of concrete at every 3.00 metre interval and every change of direction, complete all as specified and as directed. |
| 21 | Dismantling Structural Steel or Mild Steel Work of any description not otherwise provided for, complete all as specified and as directed. |
| 22 | S&F Rolled mild steel as in cooler stands (framed/unframed) purlins, rafter,trusses, rails and wind tie etc (Tee, Angle, channel or flat sections) incl distance pieces etc of grade Fe 410-W quality A including fixing with fastners at site complete all asspecified and as directed. |
| 23 | S&F in repairs Harrison rails, stainless steel, chromium plated with fixing brackets, stops rollers etc |
| 24 | Taking down Chowkhats or frames of any descriptionnot exc 1.5 Sqm each(without taking off shutters from the frames) |
| 25 | Taking downchowkats/ frames & shutters without taking offshutters from the frame, size of openingexc. 1.50 sqm but not exc 4 sqmeach complete all as specified and as directed. |
| 26 | Taking down shuttter of any descriptionexc 1 sqm but n exc 2 sqmeach complete all as specified and directed. |
| 27 | S&F Factory made Solid PVC Door Frame of size 50x47mm made out of 5.0mm thick plain colour PVC Sheet reinforced with Mild Steel Square Tube and fixing in opening as per Specification and Drawing of MES Schedule Part-II, complete all as specified and as directed. |
| 28 | S&F Factory Made Solid Panel PVC Door Shutter 30mm thick (Style) Plain Colour (Ivory Shade) consisting of Frame made out of Mild Steel Tubes for Top & Bottom Rails of Mild Steel Frame shall be covered with Heat Moulded Wood Grain PVC ‘C’ Channel having a PVC Sheet Strip of 20mm width Stuck inside withSolvent Cement for Stiles and Wood Grain PVC Sheets for Top Rail Lock Rail & Bottom Rail on either side and as gap insert for Top Rail & Bottom Rail, Panelling of Wood Grain PVC Sheetto be fitted in the Mild Steel Frame welded/sealed to the Stiles & Rails with suitable 5.0mm thick x 15mm wide PVC Sheet Beading used inside Stiles and Rails and decorative PVC Beading of 10mmx10mm (90°) and jointed together with Solvent Cement and fixing in the Frame at Site, complete all as specified and as directed. |
| 29 | S&F Pressed Steel Frame for door of size 105x60mm using 1.25mm thick Mild Steel Sheets for Doors with One or More Rebates including necessary Fixing Lugs, Hinges, Lock Strike Plate, etc., complete all as specified and as directed. |
| 30 | S&F Pressed Steel Frame of size 125x60mm using 1.25mm thick Mild Steel Sheets for Doors with One or More Rebates including necessary Fixing Lugs, Hinges, Lock Strike Plate, etc., complete all as specified and as directed. |
| 31 | M&L Cement Concrete 1:3:6 (20mm graded stone aggregate) as in Filling Back side of Pressed Steel Frame, complete all as specified and as directed. |
| 32 | M&L for Factory made Glazed and Skeleton Shutter 35mm thick of Second Class Hardwood factory made panelled shutters (Two Panel) with lock rail and panel of 9mm BWP commercial ply or 12mm venered particle board with commercial veneering on both sides. The size of rail and stile as per IS 1003 (part I ), kiln seasoned and chemically pressure treated, complete all as specified and as directed. |
| 33 | M&L for Factory made Glazed and Skeleton Shutter 35mm thick of Second Class Hardwood prepared to receive Gauge/Glass (without Sash Bars) fixed with mitred beeds supplied and fitted to Chowkat and securing Glass, Gauge, etc. sizes of Members of Shutter as specified in SSR Part-I, Section-8, Clause 8.24(a), complete all as specified and as directed. |
| 34 | S&F 200 Aluminium anodised barrel tower bolts of extruded section and fixed, complete. |
| 35 | S&F 200 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed |
| 36 | S&F 300 mm Mild steel Sliding door bolts plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts,four on bolt plate and two on staple plate and fixed |
| 37 | S&F 150mm Aluminium handles, cast type anodised, |
| 38 | S&F Floor door stopper of size 140mmof aluminium alloy body and tongue, anodised, with hard drawn steel spring ficed in floors. |
| 39 | 100mm size PVC butt hinges all as specified. (Make : Prayag/ Raj shree) |
| 40 | 100mm size PVC handles all as specified and directed (Make : Prayag/ Raj shree) |
| 41 | 150mm long PVC tower bolt all as specified and directed. Make : Prayag / Raj Shree. |
| 42 | Supply and fixing box type steel windows/ ventilators glazed & gauged factory made with side hung shutters includingbox type hinges with steel handle and steel peg stay, supply and fixing Stailess steel wire cloth 1.14mm dia and 3mm thick glass fixing with putty and glazed pins and necessary grills and guard bars of 10mm squre bars with spacing not exc 125mm c/c complete and making good the disturbed portion with PCC or Plaster and painting the surface to match with the existing surface complete all as specified and as directed. |
| 43 | M&L applying Two coats of Synthetic enamel paint over a coat of pink primer including prepration of new or previously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth |
| 44 | Hacking out old broken glass any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins / spring clips and providing and fixing new ones complete. |
| 45 | S&F in sheet glass 3mm thick ordinary quality and glazing with oil putty or fixed withwoodenbeadsin squarenot exc. 0.5 Sqm in each pane complete. |
| 46 | S&F in 5.5 mm thick tinted glass ordinary quality and glazing with oil putty or with wooden/ alluminium shutter exc 0.50 sqm each complete all as specified. |
| 47 | S&F in repairsGalvanised mild steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 48 | Dismantling Posts or Struts, rafter, purlin (wood, steel or R.C.C ) any section, including taking out embedded portion in concrete , brick work , masonaryComplete all as specified and diercted. |
| 49 | M&L for Excavating in post holes (or similar holes) eachn exc0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc50m and making good surface (soft/loose soil) complete all specified as directed by Engr-In-Charge. |
| 50 | S&F Mild Steel works in: posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc : flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to FE-290 Gde E-165complete all as specified and as directed. |
| 51 | M&L for PCC type B-2, 1:2:4( using 40mm graded stone aggregate) for foundation filling , mass concrete and etc complete all as specified and as directed. |
| 52 | Material and Labour forMild steel round bars 10mm dia and over, cut to length,bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed. |
| 53 | Dismantling fencing wire mesh, any type complete all as specified and directed by Engr-in-Charge. |
| 54 | Supply only Chain link fencing 3.14mm dia and mesh size 50mm x 50mm completeincluding provisioning of binding wirecomplete all as specified and directed by Engr-in-Charge. |
| 55 | Fixing onlyChain link fencing 3.14mm dia and mesh size 50mm x50mm complete including line wires of any mesh size and to any type standereds, rails, straining bolts etc including provisioning of binding wire complete all as specified and directed by Engr-in-Charge. |
| 56 | M&L for Mild steel screw bolts 5 to 10 mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long as in repairs complete all as specified and directed by Engr-in-Charge. |
| 57 | S&F as in repairs 75mm dia Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4)but as in repairs |
| 58 | S&F in repairs 75mm bore( Sand Cast )Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints , laid in trenches or in floors complete all as specified and directed. |
| 59 | S&F in repairs 100mm bore( Sand Cast ) Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints , laid in trenches or in floorsbut as in repairs in repairs |
| 60 | S&F in repairs75mm bore( Sand Cast ) Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints , fixed to walls but as |
| 61 | S&F in repairs 100 mm bore( Sand Cast )Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints , fixed to walls |
| 62 | S&F in repairs 75 mm dia CI bends (any radius), diminishing pieces or tapers provided with access door complete all as specified and directed. |
| 63 | S&F in repairs 100 mm dia CI bends (any radius), diminishing pieces or tapers provided with access door |
| 64 | S&F in repairs Brass Chromium plated shower rose 125 mm size with or without swivel joints,including fixing to steel pipe or union as |
| 65 | S&F in repairs 15 mmborebrass CP wall mixer for mixing hot and cold water screwed down for iron pipe and |
| 66 | S&F in repairs corner glass shelf assembly 300 size with CP railing |
| 67 | S&F in repairs CP soap dish trey. |
| 68 | S&F in repairs sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding inement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm |
| 69 | S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes;ncluding bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm |
| 70 | S&Fin repairs600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 71 | S&FFactory made PVC cupboard sides, top & bottom frame (Each side measured Seperately ) , 30 mm thick (hollow) with a wall thickness of 5mm made out of extruded 5mm thick plain PVC sheet reinforced with 19 mm x 19 mm MS square tubes of 19 gauge thickness throughout the frame and mitre cut at two corners and jointed with two numbers 150mm long brackets of 10 mm x 10 mm square tubes and cupboard frame shall be fixed to the wall using 65/100mm long MS screws through the frame by using PVC fasteners. A minimum of 4 nos of screw to be provided for each vertical member and minimum of 2 nos of srew to be provided horizontal member & including leeping to front of frame with plain/printed/prelam PVC sheet etc complete as per manufacter\"s instructions and all as specified and directedincluded in the item. including dimantling old boarding complete all as specified. Note :- Making good the disturbed side plastering and Painting with existing colour (OBD ) |
| 72 | S&F Factory made PVC centre partition, shelfs of 25 mm thicknessconsisting of MS Frame made out of MS tubeof 19 guage thickness and size of 15x15mm inserted all around the hollow profile section and insert 15mmx15mm MS tube in the centre of this section and liped with 10mm (5mm x2 ) thick plain PVCsheet at the top andbottomand 20mm wide and 15mm thick on sides using solvent cement adhesive included in the item and dimantling old boarding complete all as specified. |
| 73 | S&FFactory made PVC cupboardshutterof 30 mm thick consisting of frame made out of MS tubes of 19 gauge thickness and size 19mm x 19mm covered withpanneling of 5mm plain plus 5mm thick prelaminated PVC sheet fitted in the MS frame and sealed to the front stiles and rails which shall be20mm x15mm wide PVC beading and attached to back stiles and rails (which shall have a 5mm, 45 degree bend portion as beading) and decorative PVC beading is used on the front side of pannel externally impart perfect finish to the shutter and joint together with solvent cement adhesiveincluded in the item. including dimantling old boarding complete all as specified. |
| 74 | 5 mm thick termite proof, water proof and fire retartant plain PVC sheet jointed together & fixed on back side of Cupboard frame using solvent cement adhesiveincluded in the item. including dimantling old boarding complete all as specified. |
| 75 | Factory made PVC drawer of required size(Each side measured Seperately ) constructed by joining two nos5 mm thick plain PVCsheet at the sides andbottomjoint together with solvent cement adhesive complete all as specified and directed. |
| 76 | 5 mm thick termite proof, water proof and fire retardant laminated PVC sheetjointed together at front side of Cupboard drawer frame using solvent cement adhesive complete all as specified and directed by Engr-in-charge. |
| 77 | 5 mm thick termite proof, water proof and fire retartant plain PVC sheet exc 25 mm wide but not exc 75 mm wide fixed as a liping to sides of Cupboard frame using solvent cement adhesive complete all as specified and directed by Engr-in-charge. |
| 78 | S&F in repairs Continous piano hingesstainless steel ,bright finish width of flaps when open 40 mm complete all as specified and directed by Engr-in-charge. |
| 79 | S&F in repairs Fency type chromium plated handle , 100 mm polished bright.complete all as specified and directed by Engr-in-charge. |
| 80 | S&F in repairMagnetic catcherfor cupboards complete as all specified and directed by Engineer in Charge. |
| 81 | S&F in repair40 mm wide Mild Steel telescopic channelfixed to drawer with screws complete all as specified and as directed . |
| 82 | S&F in repair mortice latch with two levers of aluminium anodised body 65 mm longcomplete as all specified and directed by Engineer in Charge. |
| 83 | Taking up or down 15 mm bore GI tubing , fittings and connection and removing from sitecomplete all as specified and as directed by Engineer-in-charge. |
| 84 | Taking up or down 20 mm bore GI tubing , fittings and connection and removing from sitecomplete all as specified and as directed by Engineer-in-charge. |
| 85 | S&F 15 mm dia GI tubing medium grade inlcuding necessary fittings such as elbow tees cap plugs short pieces unions etc fixed to walls, floors, ceilingcomplete all as specified and as directed by Engineer-in-charge. |
| 86 | S&F 20mm dia GI tubing medium grade inlcuding necessary fittings such as elbow tees cap plugs short pieces unions etc fixed to walls, floors, ceilingcomplete all as specified and as directed by Engineer-in-charge. |
| 87 | S&F in repairs Vitreous China Squatting pan \"orissa pattern size 580x440 white with integral foot restswith front or back inlet including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including concrete complete including making good to floor. |
| 88 | S&F in repairs 110 mm dia PVC SWR\"P\" trap comple all as specified and a directed. |
| 89 | S&F in repairs Vitreous Ware wash down water closet (Pedestal), white (EWC) excluding flush pipe and flushing cystrenincluding concrete complete including making good to floor. |
| 90 | Material and labour Flush pipe of Polyethylene of low or high density or PVC 32 mm dia, for low level cistern |
| 91 | S&F in repairs plastic water closet seat cover white close pattern with flat bottom and cover complete all as specified as direected. |
| 92 | S&F in repair health faucet with 8 mm dia, 1.5 mtr long flexible tube & wall hook,all as specified and directed |
| 93 | S&F in repair 10 Liters capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets and flush pipe of polyetylene of low or high density or PVC 32 mm dia connections pipe complete. |
| 94 | S&F in repairs vitreous china WHB white flat back size 550 x 400 mm including brackets, 32 mm dia waste fittings brass CP for WHBwith long shank screwed and fly nuts , flags and bedded in red lead cement and outer end fixed complete all as specified and as directed by Engineer-in-charge. |
| 95 | S&F in repairs Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe & waste pipe) complete all as specified and as directed by Engineer-in-charge. |
| 96 | S&Fin repairs 15mm dia Pillar taps fancy type cast copper alloy, with capstan heads,chromium plated,screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and flu-nuts screwed for iron pipe complete all as specified and as directed by Engineer-in-charge. |
| 97 | S&F in repairs 15 mm bore Stop Valve fancy type chromium plated with long shank and cup (concealed type) ,cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed in repairs complete all as specified and as directed by Engineer-in-charge. |
| 98 | S&F in repairs 15 mm bore Stop Valve fancy type chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and as directed by Engineer-in-charge. |
| 99 | S&F in repairs 15 mm bore Fancy type Chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engineer-in-charge. |
| 100 | S&F in repairsPVC connections 15 mm size with PTMT nuts of length 450mm complete all as specified and as directed by Engineer-in-charge. |
| 101 | S&F in repairs Aluminium anodisedTubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed by Engineer-in-charge. |
| 102 | S&F in repairs 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with and including clamps, nut bolts including dismantling of old AC rain water pipe etc. complete all as specified and as directed by Engineer-in-charge. |
| 103 | S&F in repairs 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed, complete all as specified and as directed by Engineer-in-charge. |
AI Tender Summary
Tender Timeline
Jul 21, 2022
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 21, 2022
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 28, 2022
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedJul 28, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 30, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender