Various Works Of Divisional Office Complex Including Partition Of Office Hall, Glass Fitting Etc.”.- 1 Demolishing Cement Concrete Manually / By Mechanical Means Including Disposal Of Material Within 50 Meters Lead As Per Direction Of Engineer-Incharge 1:3:6 Or Richer Mix ( I / C Equivalent Design Mix ) 1X15.5’X12’X1’=186Cft, 1X18’X12’X1’=216Cft=> Total=402Cft Or 11.38M³ 2 Taking Out Doors, Windows And Clerestory Window Shutters ( Steel Or Wood ) Including Stacking Within 50 Meters Lead : Of Area Of 3 Sqm. And Below07 No. 3 Of Area Beyond 3 Sqm02 No. 4 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering- All Work Upto Plinth Level 1:4:8 ( 1 Cement: 4 Coarse Sand :8 Graded Stone Aggregate 40Mm Nominal Size ) Crushed1x15.5’X12’X0.5’=93Cft, 1X18’X12’X0.5’=108Cft => Total= 201Cft Or 5.7 M? 5 Providing And Laying Vitrified Tiles In Floor With Different Sizes ( Thickness To Be Specified By The Manufacturer ) , With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Brand And Manufacturer, In All Colours And Shades, Laid With Cement Based High Polymer Modified Quick Set Tile Adhesive ( Water Based ) Conforming To Is: 15477, In Average 6 Mm Thickness, Including Grouting Of Joints ( Payment For Grouting Of Joints To Be Made Separately ) 11.54.2 Size Of Tile 600X600 Mm1x15.5’X12’=186Sft, 1X18’X12’=216Sft=> Total=402Sft Or 37.36M² 6 Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections / Appropriate Z. Sections And Other Sections Of Approved Make Conforming To Is : 733 And Is : 1285, Fixed With Dash Fastener Of Required Dia. And Size Including Necessary Filling Up Of Gaps At Junctions I.E, At Top, Bottom And Sides With Required Epdm Rubber I Neoprene .. Gasket Felt Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing I Panelling, C.P. Brass I Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In- Charge ( Glazing, Panelling And Dash Fasteners To Be Paid For Separately. ) Powder Coated Aluminium ( Minimum Thcknessof Powder Coated 50 Microns ) 2X10’X1’=20Rft, 2X3.25’X1’=6.50Rft, 2X10’X1’=20Rft, 4X2.75’X1’=11Rft, 4X10’X1’=40Rft, 4X18’X1’=72Rft => Total =169.50@0.85Kg / Feet=144.07Kgadd Weight For Beading@2Kg, Therefore Total =146.07Kg 7 For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges I Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber I Neoprene Gasket Required ( Fittings Shall Be Paid For Separately. ) Powder Coated Aluminium ( Minimum Thickness Of Powder Coated 50 Micronsdoor 1:2×2’×7’=28, 2×3’×3.25’=19.50=> Total =47.50@0.7Kg / Feet=33.25Kg, Add Weight For Beading=1Kg 8 Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber I Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge. ( Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item. ) With Float Glass Panes Of 5.50 Mm Thickness ( Weight Not Less Than 12. 50 Kg I Sqm ) Total=439.25Sft Or 40.82M² 9 Providing And Fixing 12Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board ( Conforming To Is: 12823 Grade-L Type-11 ) In Panelling Fixed In Aluminium Doors, Windows Shutters And Partition Frames With C. P. Brass I Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer-In-Chargepre-Laminated Particle Board With Decorative Lamination On One Side And Balancing Lamination On Other Sidetotal=417.63Sft Or 38.81M² 10 Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia And Length ( Hold Fast Lugs Or With Dash Fasteners Shall Be Paid For Separately ) :6 Second Class Kail Wood2x8.5X1=17Rft, 2X4x1=8Rft, 5X2x6=60Rft, 5X2x5=50Rft=> Total=135Rft Or 41.16Rm41.16×0.12×0.10=0.49M³ 11 Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows Fixing With Butt Hinges Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer-In-Charge. ( Note: -Butt Hinges And Necessary Screws Shall Be Paid Separately ) . Second Class Deodar Wood 35Mm Thick.1X2x4x8.5=68Sft Or 6.32M²×0.5=3.16M² 12 Providing And Fixing Panelling Or Panelling And Glazing In Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows ( Area Of Opening For Panel Inserts Excluding Portion Inside Grooves Or Rebates To Be Measured ) . Panelling For Panelled Or Panelled And Glazed Shutters 25 Mm To 40 Mm Thick.Plain Particle Board Flat Pressed, 3 Layer Or Graded Wood Particle Board Medium Density Grade I, Is : 3087 Marked 13 Providing And Fixing Glazed Shutters For Doors, Windows And Clerestory Windows Using 4Mm Thick Float Glass Panes Including Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws. Second Class Deodar Wood5×4×1.25×4=100Sft Or 9.29M²9.29×0.80=7.43M² 14 Providing And Fixing Wire Gauze Shutters Using Galvanized M.S. Wire Gauze Of Average Width For Aperture 1.4 Mm In Both Directions With Wire Of Dia. 0.63 Mm For Doors, Windows And Clerestory Windows With Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required 35Mm Thick Second Class Deodar Wood Size With Necessary Screws As Per Direction Of Engineer-In-Charge :5×4×1.25×4=100Sft Or 9.29M²9.29×0.80=7.43M² 15 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade. Two Or More Coats On Wood Work.Total=282Sft Or 26.21M² 16 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade. Two Or More Coats On New Steel Work.Qty Vide Item No. 14 17 Providing And Fixing Aluminum Sliding Door Bolts Isi Marked Anodized ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade With Nuts And Screws Etc. Complete :300X16 Mm 250X16 Mm2×2=4No. 18 Providing And Fixing Aluminum Tower Bolts Isi Marked Anodized ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade With Necessary Screws Etc. Complete :5×4×4=80Nos.- Windows@57.53 / No 19 4×2×1=8Nos. – Doors@102.3 / No. 20 Providing And Fixing Aluminum Handles Isi Marked Anodized ( Anodic Coating Not Less Than Grade Ac 10 As Per Is: 1868 ) Transparent Or Dyed To Required Colour And Shade With Necessary Screws Etc. Complete.5×4×2=40Windows@66.35 / No 21 4×2=08Doors@52.3 / No 22 Providing And Fixing Pvc Wall Panelling Including Lead Lift Complete Job.2×15.5×10=310Sft, 2×12×10=240Sft, 2×18×10=360Sft, 2×12×10=240Sft=> Total=1150Sft Or 106.68M²deductions=10.13M²=> Total Net Qty.=96.75M² 23 Providing And Fixing Pvc Ceiling Panelling Including Lead Lift Complete Job.1×15.5×12×10=155Sft , 1×18×12×10=180Sft=> Total= 335Sft Or 31.13M² 24 Carriage Of Material By Mt Including Loading Unloading And Stacking Complete Job At Sitebajree For An Average Distance Of 03 Km By Mt6.65Mt@328.7 25 Sand For An Average Distance Of 18 Km By Mt10.97Mt@163.13
