Bids Are Invited For Custom Bid For Services - Boq Item No 1 , Custom Bid For Services - Boq Item No 2 , Custom Bid For Services - Boq Item No 3 , Custom Bid For Services - Boq Item No 4 , Custom Bid For Services - Boq Item No 5 , Custom Bid For Services - Boq Item No 6 , Custom Bid For Services - Boq Item No 7 , Custom Bid For Services - Boq Item No 8 , Custom Bid For Services - Boq Item No 9 , Custom Bid For Services - Boq Item No 10 , Custom Bid For Services - Boq Item No 11 , Custom Bid For Services - Boq Item No 12 , Custom Bid For Services - Boq Item No 13 , Custom Bid For Services - Boq Item No 14 , Custom Bid For Services - Boq Item No 15 , Custom Bid For Services - Boq Item No 16 , Custom Bid For Services - Boq Item No 17 , Custom Bid For Services - Boq Item No 18 , Custom Bid For Services - Boq Item No 19 , Custom Bid For Services - Boq Item No 20 , Custom Bid For Services - Boq Item No 21-- 1 Providing Work Services for 11KV/433 volts sub station consisting of transformers, DG sets and connected switch gears and related HT/LT switch gears, distribution systems, UG cables/devices fixed in the installations and maintenance of service cells etc on all days including Sundays and Holidays all as specified and as directed by Engineer-in-Charge for area covered under the following installations. (a) FMME & Assaye line S/s, MEG Offrs Mess S/s with one Electrician skilled (with ITI relevent trade) per shift (08 hrs) for 02 shifts per day. Per month per job 11 2 (b) DGI Complex with one Electrician skilled (with ITI in relevant trade) Per Shift (08 Hrs) for 03 Shifts per day. Per month per job 11 3 (c) ADMC Ph 1, OLD TB3 etc with one Electrician skilled (with ITI in relevant trade) Per Shift (08 Hrs) for 02 Shifts per day. Per month per job 11 4 Comprehensive maintenance of 8 passenger lift manufactured by OMEGA Elevators bearing No 802046, regularly and systematically including inspection adjustment, repair, renewal or replacement of machine motor and controller parts including worms, bearing gears, brake magnet coils or break motors, break shoes, brushes, windings, commutators, rotating elements, contacts, coil resistance for operating and motor circuits, magnets frames and other mechanical parts, Door shoes, safety devices controller, Door dirve card, speed relay board card and governors guide shoes, guide rollers, gibs, wire ropes, ARD, PCB cards of main control panel, existing capacity of batteries etc as per the direction of Engineer- in charge and as per the written directon of Govt lift inspecter and lubrication as required including emergency call back services and over time examination etc complete all as specified and as directed. Location :ADMC Ph-I Per month 11 5 Comprehensive maintenance of 8 passenger lift manufactured by OMEGA Elevators bearing No 802047, regularly and systematically including inspection adjustment, repair, renewal or replacement of machine motor and controller parts including worms,bearing gears, brake magnet coils or break motors, break shoes, brushes, windings, commutators, rotating elements, contacts, coil resistance for operating and motor circuits, magnets frames and other mechanical parts, Door shoes, safety devices controller, Door dirve card, speed relay board card and governors guide shoes, guide rollers, gibs, wire ropes, ARD, PCB cards of main control panel, existing capacity of batteries etc as per the direction of Engineer- in charge and as per the written directon of Govt lift inspecter and lubrication as required including emergency call back services and over time examination etc complete all as specified and as directed. Location :ADMC Ph-I Per month 3 6 Comprehensive maintenance of Dum weighter Lift manufactured by Heera Engg co Ltd bearing No- 7736 (Phase-I) regularly and systematically including inspection adjustment,repair,renewal or replacement of machine motor and controller parts including worms, bearing gears, brake magnet coils or break motors, break shoes, brushes, windings, commutators, rotating elements, contacts, coil resistance for operating and motor circuits, magnets frames and other mechanical parts, Door shoes, safety devices controller, Door dirve card, speed relay board card and governors guide shoes, guide rollers, gibs, wire ropes, ARD, PCB cards of main control panel, existing capacity of batteries etc as per the direction of Engineer- in charge and as per the written directon of Govt lift inspecter and lubrication as required including emergency call back services and over time examination etc complete all as specified and as directed. Location : ADMC- Ph -I Per month 11 7 Comprehensive maintenance of 8 passenger lift manufactured by Supriya lift bearing No - 20010 (Phase-II) regularly and systematically including inspection adjustment,repair,renewal or replacement of machine motor and controller parts including worms, bearing gears, brake magnet coils or break motors, break shoes, brushes, windings, commutators, rotating elements, contacts, coil resistance for operating and motor circuits, magnets frames and other mechanical parts, Door shoes, safety devices controller, Door dirve card, speed relay board card and governors guide shoes, guide rollers, gibs, wire ropes, ARD, PCB cards of main control panel, existing capacity of batteries etc as per the direction of Engineer- in charge and as per the written directon of Govt lift inspecter and lubrication as required including emergency call back services and over time examination etc complete all as specified and as directed. Location - ADMC Ph-II Per month 11 8 Comprehensive maintenance of 8 passenger lift manufactured by Supriya lift bearing No - 20011 (Phase-II) regularly and systematically including inspection adjustment, repair, renewal or replacement of machine motor and controller parts including worms, bearing gears, brake magnet coils or break motors, break shoes, brushes, windings, commutators, rotating elements, contacts, coil resistance for operating and motor circuits, magnets frames and other mechanical parts, Door shoes, safety devices controller, Door dirve card, speed relay board card and governors guide shoes, guide rollers, gibs, wire ropes, ARD, PCB cards of main control panel, existing capacity of batteries etc as per the direction of Engineer- in charge and as per the written directon of Govt lift inspecter and lubrication as required including emergency call back services and over time examination etc complete all as specified and as directed. Location - ADMC Ph-II Per month 11 9 Comprehensive Maintenance of single full collective control passenger elevator equipment bearing Nos A-890240 (OTIS make) regularly and systematically including inspection adjustment, repair, renewal or replacement of machine motor and controller parts including worms, bearing gears, brake magnet coils or brake motors, brake shoes, brushes, windings, commutators, rotating elements, contacts, coil resistance for operating and motor circuits, magnet frames and other mechanical parts, Door shoes, safety devices controller, Door dirve card, speed relay board card and governors guide shoes, guide rollers, gibs, wire ropes, ARD, PCB cards of main control panel, existing capacity of batteries etc as per the direction of Engineer - in - Charge and as per the written direction of Govt lift inspector and lubrications as required including emergency call back service and over time examination etc complete all as specified and as directed. Location :- FMME Bldg No - 155. Per month 11 10 Comprehensive Maintenance of single full collective control passenger elevator equipment bearing Nos A-89069 (OTIS make) regularly and systematically including inspection adjustment, repair, renewal or replacement of machine motor and controller parts including worms, bearing gears, brake magnet coils or brake motors, brake shoes, brushes, windings, commutators, rotating elements, contacts, coil resistance for operating and motor circuits, magnet frames and other mechanical parts, Door shoes, safety devices controller, Door dirve card, speed relay board card and governors guide shoes, guide rollers, gibs, wire ropes, ARD, PCB cards of main control panel, existing capacity of batteries etc as per the direction of Engineer - in - Charge and as per the written direction of Govt lift inspector and lubrications as required including emergency call back service and over time examination etc complete all as specified and as directed. Location :- FMME Bldg No - 156. Per month 11 11 Comprehensive maintenance of 13 passenger lift manufactured by ESCON Elevators bearing No 16010571, regularly and systematically including inspection adjustment, repair, renewal or replacement of machine motor and controller parts including worms, bearing gears, brake magnet coils or break motors, break shoes, brushes, windings, commutators, rotating elements, contacts, coil resistance for operating and motor circuits, magnets frames and other mechanical parts, safety devices and governors guide shoes, guide rollers, gibs, wire ropes, ARD, PCB cards of main control panel, existing capacity of batteries etc as per the direction of Engineer- in charge and as per the written direction of Govt lift inspecter and lubrication as required including emergency call back services and over time examination etc complete all as specified and as directed. Location : Chowdhary Line, Block - A. Per month 11 12 Comprehensive maintenance of 13 passenger lift manufactured by ESCON Elevators bearing No 16010562, regularly and systematically including inspection adjustment, repair, renewal or replacement of machine motor and controller parts including worms, bearing gears, brake magnet coils or break motors, break shoes, brushes, windings, commutators, rotating elements, contacts, coil resistance for operating and motor circuits, magnets frames and other mechanical parts, safety devices and governors guide shoes, guide rollers, gibs, wire ropes, ARD, PCB cards of main control panel, existing capacity of batteries etc as per the direction of Engineer- in charge and as per the written direction of Govt lift inspecter and lubrication as required including emergency call back services and over time examination etc complete all as specified and as directed. Location : Chowdhary Line, Block - B. Per month 11 13 Comprehensive maintenance of 13 passenger lift manufactured by ESCON Elevators bearing No 16010575, regularly and systematically including inspection adjustment, repair, renewal or replacement of machine motor and controller parts including worms, bearing gears, brake magnet coils or break motors, break shoes, brushes, windings, commutators, rotating elements, contacts, coil resistance for operating and motor circuits, magnets frames and other mechanical parts, safety devices and governors guide shoes, guide rollers, gibs, wire ropes, ARD, PCB cards of main control panel, existing capacity of batteries etc as per the direction of Engineer- in charge and as per the written direction of Govt lift inspecter and lubrication as required including emergency call back services and over time examination etc complete all as specified and as directed. Location : Chowdhary Line, Block - C. Per month 11 14 Comprehensive maintenance of 13 passenger lift manufactured by ESCON Elevators bearing No 17110462, regularly and systematically including inspection adjustment, repair, renewal or replacement of machine motor and controller parts including worms, bearing gears, brake magnet coils or break motors, break shoes, brushes, windings, commutators, rotating elements, contacts, coil resistance for operating and motor circuits, magnets frames and other mechanical parts, safety devices and governors guide shoes, guide rollers, gibs, wire ropes, ARD, PCB cards of main control panel, existing capacity of batteries etc as per the direction of Engineer- in charge and as per the written direction of Govt lift inspecter and lubrication as required including emergency call back services and over time examination etc complete all as specified and as directed. Location : RC Line, Block P-80 Per month 11 15 Comprehensive maintenance of 13 passenger lift manufactured by ESCON Elevators bearing No 16010570, regularly and systematically including inspection adjustment, repair, renewal or replacement of machine motor and controller parts including worms, bearing gears, brake magnet coils or break motors, break shoes, brushes, windings, commutators, rotating elements, contacts, coil resistance for operating and motor circuits, magnets frames and other mechanical parts, safety devices and governors guide shoes, guide rollers, gibs, wire ropes, ARD, PCB cards of main control panel, existing capacity of batteries etc as per the direction of Engineer- in charge and as per the written direction of Govt lift inspecter and lubrication as required including emergency call back services and over time examination etc complete all as specified and as directed. Location : RC Line, Block P-81 Per month 11 16 Comprehensive maintenance of 13 passenger lift manufactured by ESCON Elevators bearing No 16010573, regularly and systematically including inspection adjustment, repair, renewal or replacement of machine motor and controller parts including worms, bearing gears, brake magnet coils or break motors, break shoes, brushes, windings, commutators, rotating elements, contacts, coil resistance for operating and motor circuits, magnets frames and other mechanical parts, safety devices and governors guide shoes, guide rollers, gibs, wire ropes, ARD, PCB cards of main control panel, existing capacity of batteries etc as per the direction of Engineer- in charge and as per the written direction of Govt lift inspecter and lubrication as required including emergency call back services and over time examination etc complete all as specified and as directed. Location : RC Line, Block P-82 Per month 11 17 Comprehensive maintenance of 13 passenger lift manufactured by ESCON Elevators bearing No 17110461, regularly and systematically including inspection adjustment, repair, renewal or replacement of machine motor and controller parts including worms, bearing gears, brake magnet coils or break motors, break shoes, brushes, windings, commutators, rotating elements, contacts, coil resistance for operating and motor circuits, magnets frames and other mechanical parts, safety devices and governors guide shoes, guide rollers, gibs, wire ropes, ARD, PCB cards of main control panel, existing capacity of batteries etc as per the direction of Engineer- in charge and as per the written direction of Govt lift inspecter and lubrication as required including emergency call back services and over time examination etc complete all as specified and as directed. Location : RC Line, Block P-83 Per month 11 Note :- (i) If any water collected in the lift well shall be drain out with suitable capacity of pumpset with out any extra cost (ii) The contractor is responsible for repair/replacement of LED spot light /light fitting/fan/exhaust fan/call bell/limit switch, main cable and branch cable without any extra cost etc. (iii) The contractor is responsible for internal painting of lift cabin once in a contract period without any extra costas per the direction of Engr-in-charge. (iii) The contractor is also responsible for deployed his lift mech daily to report Engr-in-Charge at 0830hr morning without fail for routing check of each lift and handover the daily report of each lift for countersignature. If the lift mech not report to the Engr-in-Charge then necessary recovery will be carriedout i.e Rs. 1000/day as a penelty of each lift upto 3 days afterthat Rs.1500/day for next 3 days and after that Rs. 2500/day will be carriedout for each lift. (iv) If the contractor not attend /resolve the logged/given complain within 24 hours then Rs. 1000/day as a penelty will be carriedout upto 3 days afterthat Rs. 1500/day for next 3 days and after that Rs. 2500/day will be carriedout for each lift. 18 Carrying out the inspection of lift by Govt lift inspector for wortiness certificate all as specified and as directed. Each Job 14 19 Disconnecting the electric cable from the terminal box of 2 HP motor, Decoupling the motor from them pump, remove the motor from the foundation bed and taking out the motor and transporting to authorised work shop and performing following works as specified and directed by Engr-in-Charge Each Job 4 (i) Dismantling the motor and taking out the burnt copper winding /fiber strip/insulating materials and worn out ball bearing - 2 No (ii ) Clean the stator slots by CTC solution and rewind on stator slots with super enamelled copper wire of existing gauge with insulating materials/fiber strip/varnishing and made terminal connection of fiber glass coated wire. (iii) Replacement of ball bearing - 2 No (iv) Assembling the motor and painting with two coat of primer and one coat of synthetic enamel paint including marking flow of water and MES NO all as per norms and all as specified and as directed as directed by the engr-in-charge. (v) Transporting to the motor to the site refixing on foundation channel with new bolts and nuts , coupling the pump and motor with correct alignment apply grease and connecting electrical connections testing complete alll as directed and specified by the Engr-in-charge. 20 M&L for Emptying complete water, removing sludge, silt, cleaning internal surface and bottom of PVC tank of any capacity upto 1000 ltrs with wire mesh/brush/brooms etc by using washing soda and bleaching powder completely, finally cleaning with plain water for making the tank suitable to store water and marking out side the tank in visible place the capacity of tank, date of cleaning, due date for cleaning with white enamel paint complete all as specified and as directed by Engineer-in-Charge. Each Job 6 21 S&F in replacement of rubber hose pipe 32 mm dia heavy duty.
