|
| 1 | Disconnecting electric connections of unserviceable street light fitting installed on poles/ high masts/ walls etc, sealing the ends of cables with insulating tape and taking down the fitting carefully; carrying out repairs including replacing unserviceable LED driver, minor spares like nut/ bolts etc. and making the fitting serviceable and re-fixing at the same/ new location and connecting up with new copper flexible conductor of suitable size complete including necessary tools, safety gear, ladders etc. all as specified and as directed by Engineer-in-Charge.[Note: (i) LED drivers require replacement shall be measured and paid separately as \"Supply only\" under relevant items of BOQ.(ii) Cost of any other minor spares, insulation tape, copper cable for connection & T&P shall be deemed to be included in the quoted rate(iii) All street light complaints notified to the contractor shall be attended to and rectified within 24 hours by engaging requisite manpower on all working days] |
| 2 | All as per Item No. 1 herein before but for Gate light/ Garden light fixed to gate pillars/ poles. |
| 3 | All as per Item No. 1 herein before but for Flood lights fixed to poles/ walls. |
| 4 | Supply only LED Electronic driver 100 W, 0.7A, 240V, 50Hz operating range 120-277V[Model No. X100C070V143FNY1BO of Make: Philips] |
| 5 | Supply only LED Electronic driver 150 W 0.7A, 240V, 50Hz operating range: 120-277V[Model No. XITANIUM 150W 0.7A 0-10V INTELLIVOLT of Make: Philips] |
| 6 | Supply only LED Electronic driver for street light 45W, 240V, 50Hz operating range: 120-277V[Model No. SODRVQL-65-700-45W of Make: CG] |
| 7 | Supply only LED Electronic driver for street light 15W, 240V, 50Hz operating voltage range 100-107V[Model No. EUP-150S105SV of Make: Havells]. |
| 8 | Supply only LED driver 240 V, 50Hz[Model No. FLPT-3512 of Make: Bajaj]. |
| 9 | Supply and Replacement of shock proof, rust proof, fire retardant non transparent SMC Kiosk pole box of internal size not less than 300x200x105mm with hinged door, for out door duty with and including four Nos. insulated aluminium bus bar of 60 Amp rating, mounted on unbreakable insulators, 10 Amp MCB SP with aluminium lugs of suitable size up to 50 sq.mm cable including 02 Nos. 40x3mm flat iron clamps duly painted with two coats of synthetic enamel paint over a coat of red oxide primer including suitable size nut-bolts, washers etc. all as specified and as directed.[Make: Sintex/ Hensel] |
| 10 | M&L for Preparation of surfaces of steel electric poles/ masts of height up to 7.5m (exposed) by scraping with emery paper and making free from rust, dust and any foreign material and applying one coat of aluminium paint including lettering on poles such as Pole No and source point of electric supply with white enamel paint on black back ground, zebra painting up to 1.2 m height from ground level with two coats of synthetic enamel paint in 30cm height of alternate bands all as specified and as directed. |
| 11 | Dismantling of electric pole up to 9 metre long and taking out from the trench with and including necessary excavation, earth work, breaking of pole foundation and making good the disturbed surface complete all as specified and as directed. |
| 12 | Fixing only electric pole of height up to 9m in re-location complete all as specified and directed.[Note: Necessary excavation, earth work, foundation & coping will be measured and paid separately] |
| 13 | Supply and replacement ofTraffic Signal Light LED based, solid state, low power consumption, powder coated CRCA/ Poly carbonate body withtoughened front glass with rubber gasket, ultra bright AlGaAs LED in red and green colour 1x20 watt LED, working voltage: 150-300 V AC complete all as specified and as directed.(Model No. TLL ofmake: Keltron/ Innovation Technologies or equivalent) |
| 14 | Supply and install LED post top lantern with spun aluminium housing with opal acrylic diffuser, 25W, IP 65 protection complete including necessary cable connection all as specified and as directed including taking down existing unserviceable fitting.[Cat No. CORALPT25WLED757PSYMTOPC of Make: Havells or Cat No. BGCTN 25W LED WW of Make: Bajaj or Techno-commercially equivalent in Philips/ Wipro]. |
| 15 | S&F of LED street light fitting, energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP-66 with high power LEDs and unique peanut lens to ensure uniform light distribution complete with all accessories pre-wired including taking down existing unserviceable fitting complete all as specified and directed.[Cat. Part No. BRP409 LED 074 CW HO MR FG S1 PSU GR of Philips or ENDURACITYLINERNEO SL70WLED757 PASYBOTG (ENDURA CITYLINER NEO) of Havells or LR02-671-XXX-57-G2 (Skyline) of Wipro] |
| 16 | S&F die cast aluminium LED Flood light not less than 60W IP 66 with high power LEDs, integral flood light with driver inside a PDC housing including all fittings, clamps, angle frame etc for fixing on wall/ pole etc with all accessories pre-wired including taking down existing unserviceable fitting complete all as specified and directed[Make: Cat Part No. JETA PROFL70WLED757LT G of make Havells or LF19-711-060-57-XX of make: Wipro or BVP192 LED82 CW HO NB FG GR PSU of make: Philips]. |
| 17 | S&F in repairs power contactor 415 volts, 32 Amps, 3 pole including Auxiliary contact complete all as specified and as directed.[Cat No. MNX 32 of Make: L&T or equivalent in Legrand/ Schneider] |
| 18 | Taking out of existing LT UG cable of size 3½/4 core, 10 to 25sq.mm including taking out protection bricks complete all as specified and directed.[Note: Earth work & excavation will be measured and paid separately]. |
| 19 | Supply, lay, connect, test and commissioning of LT XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured electric power cables (heavy duty) with aluminium conductor 1100 volts grade of size 4 core 10 sq.mm complete all as specified and directed.[Note: (i) Necessary test results like continuity test, megger tests shall be submitted to Engineer-in-Charge before the cable is laid.(ii) Excavation & earth work will be measured and paid separately]. |
| 20 | All as per Item No. 20 herein before but cable of size 4 core 16 sq.mm |
| 21 | All as per Item No. 20 herein before but cable of size 4 core 25 sq.mm |
| 22 | Relaying of old serviceable LT XLPE UG cable 1100V grade of size 2/4 core, 10 to 25sq.mm after fault rectification complete all as directed by Engineer-in-Charge [Note: Excavation & earth work will be measured and paid separately]. |
| 23 | Excavating manually in trenches n. exc. 1.5m wide and n. exc. 1.5m in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n. exc. 10sq.m. on plan and n. exc. 1.5m in depth and getting out in soft/ loose soil. |
| 24 | Supply and spread river sand as in cushioningfor UG cable allas specifiedin clause 19.75 of SSRPart I.[Note: Punned down thickness shall be considered for payment] |
| 25 | Supply and laying well burnt sub class ‘B’ bricks (old size brick) laid in trenches above sand cushioning for cable protection complete all as specified and as directed. |
| 26 | All as per Item No. 25 herein before but except bricks. [Note: Serviceable bricks retrieved from taking out cable item shall be reused]. |
| 27 | Returning, filling in including spreading leveling watering and well ramming in layers not exc 25cm in any type of soil all as specified and as directed. |
| 28 | Removing excavated materials to a distance not exc. 50m and depositing where directed at a level n.exc 1.50m above the starting point all as specified and as directed. |
| 29 | M&L for LT cable straight through jointing kit heat shrinkable type suitable for XLPE/ PVC insulated cable of size 4C x 10 - 25sq.mm complete including testing the cable joint for healthiness, cutting & removing unserviceable joint, preparation of both ends of cable to be joined with necessary stretching, aligning, making joint all as specified and as required at site. |
| 30 | Horizontal Boring under hard standing/ pavements or roads manually using suitable auger for insertion of GI pipes of 40mm bore and making good the disturbed surface complete all as specified and as directed.[Note: GI pipe will be measured and paid separately] |
| 31 | S&F GI tubes 40mm bore dia light grade with all fittings laid in trenches or inserting in horizontal boring complete all as specified and as directed. |
| 32 | S&F steel pad lock 50mm with 3 Nos keys for battery boxes complete all as specified and as directed.[Make: Godrej/ Sheel/ Link] |
| 33 | M&L for pole mount street light bracket made of GI pipe light grade 40mm dia, appx 0.65 m long welded at an angle of 120º to MS cap made of MS sheet of suitable thickness and of length 6” and dia suitable for fixing at the top of steel tubular poles, fixed with nuts and bolts complete including painting with two coats of aluminium paint over a coat of zinc chrome primer all as specified and as directed |
| 34 | M&L for street light bracket made of GI pipe medium grade 40mm dia, appx 1.20 m long bent to shape suitable for fixing street light fixed to pole with 2 Nos of MS FI brackets with nuts and bolts complete including painting with two coats of aluminium paint over a coat of zinc chrome primer all as specified and as directed |
| 35 | S&F in repair three core PVC insulated flexible cable cord 1.5 sq.mm multi stranded copper conductor flexible cables 1100 Volt grade complete for making connection from pole box to street light all as specified and as directed. [Make: Finolex/ Polycab/ Havells/ Plaza]. |
| 36 | All as per Item No. 35 herein before but of size 2.5 sq.mm |
| 37 | S&F in repair twin corePVC insulated multi-stranded aluminium conductor (un sheathed) flexible industrial cables 1100 Volt grade of size 6sq.mm complete all as specified and directed.[Make: Finolex/ Polycab/ Havells/ Plaza]. |
| 38 | All as per Item No. 37 herein before but of size 10 sq.mm |
| 39 | S&F in repairsMCB TPN 6 to 32 Amps, 415V, \"C\" curve, 10 KA complete all as specified and as directed.[Make: L&T/ Legrand/ Schneider] |
| 40 | S&F in repairsMCB TPN 40 to 63 Amps, 415V, \"C\" curve, 10 KA complete all as specified and as directed.[Make: L&T/ Legrand/ Schneider] |
| 41 | S&F in repairsMCB SP 6 to 32 Amps, 240V, \"C\" curve, 10 KA complete all as specified and as directed.[Make: L&T/ Legrand/ Schneider] |
| 42 | Supply and install out door type digital street light timer panel, 1 Ph, 6kW, 230 Volts AC, IP-54 protection with necessary contactor, relay, MCB, internal wiring with FRLS copper conductor cables complete all as specified and as directed. [Make: IHXSS01060 of make: Havells or equivalent in Indo Asian/ Swadeep] |
| 43 | Supply and install out door type digital street light timer panel, 1 Ph, 12kW, 230 Volts AC, IP-54 protection with necessary contactor, relay, MCB, internal wiring with FRLS copper conductor cables complete all as specified and as directed. [Make: IHXSS03120 of make: Havells or equivalent in Indo Asian/ Swadeep] |
| 44 | Supply and install out door type digital street light timer panel, 3 Ph, 6kW, 415 Volts AC, IP-54 protection with necessary contactor, relay, MCB, internal wiring with FRLS copper conductor cables complete all as specified and as directed. [Make: IHXTS03060 of make: Havells or equivalent in Indo Asian/ Swadeep] |
| 45 | Supply and install out door type digital street light timer panel, 3 Ph, 12kW, 415 Volts AC, IP-54 protection with necessary contactor, relay, MCB, internal wiring with FRLS copper conductor cables complete all as specified and as directed. [Make: IHXTS09120 of make: Havells or equivalent in Indo Asian/ Swadeep] |
| 46 | Supply & erecting in true vertical position, steel tubular swaged pole 410-SP-22, 8.5 meter long complete with mild steel base plate, pole cap, finial taper plug, bolts, nuts, washers etc. including painting the exposed outer surfaces with two coats of aluminium paint over a coat of red oxide primer including 3 Nos of bands/straps painted with signal red and white colour (300mm each) in alternate layers from plinth block, marking of pole number with black synthetic enamel paint 2.5 cm height including applying one coat of black bituminous paint on portion embedded in concrete foundation complete all as specified and directed.[Note: Earth work and excavation, PCC foundation & coping shall be measured and paid separately] |
| 47 | M&L for plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete all as specified and as directed. |
| 48 | M&L for plain cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete all as specified and as directed. |
| 49 | M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping of pole all as directed including use & waste of necessary form work all as specified and as directed. |
| 50 | S&F outdoor type stand mounted high mast control panel made of 3mm thick CRCA sheet duly powder coated, comprising of MCB TPN 63 A as incomer, single dial timer switch, 3P contactor 45 Amps for automatic switching of luminaires, 3P contactor 9 Amps - 02 Nos for power tool control, push buttons, terminals for incoming 16 Sq.mm and outgoing 12x2.5 Sq.mm cables including necessary PCC pedestal, disconnecting and taking down existing unserviceable panel complete all as specified and as directed by the Engineer-in-charge |
