Military Engineer Services-MES has published Repair And Replacement Of Defective Spare Of Effluent Treatment Plants, Fume Suction Plant, Car Washing Plant, Degreasing Plant And Hull Painting Plant Located In Delhi Cantt Under Ge ( U ) P And M Delhi Cantt. Submission Date for this Tender is 27-07-2022. Industrial Process Machinery and Equipments Tenders in delhi Delhi. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 04-Jul-2022 | Corrigendum No 1 | Date | 16-07-2022 |
| 2 | 04-Jul-2022 | Corrigendum No 1 | BOQ | 16-07-2022 |
| 3 | 06-Jul-2022 | Corrigendum No 2 | Date | 20-07-2022 |
| 4 | 12-Jul-2022 | CorrigendumNo3 | Other | 20-07-2022 |
| 5 | 20-Jul-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 27-07-2022 |
| Sl. No. | Item Description |
| 1 | Draining and cleaning of alkaline chemical tank ,Hot water tank, Cold water tank in installed basement of de-greasing plant and 05 Nos ofETP tank complete andremovingfrozen solid sludge from alltank in each month. Solid sludge and other wastage should be disposed / thrown at a minimum distance of 100 metre away from the plant or a location decided by users with in the 505 ABW premises complete all as specified and as directed. Detailsof Tank - (a)05 ETP tank ( Clean in each Month) Total -5 x 6 (month )= 30 month (b)03 Tank (Alkaline Tank-01, Hot water Tank-01, ColdWater tank -01) Total = 3 x 3 (clean the tankonce in 02 months) = 9 Months G total=30+9=39 Months |
| 2 | Material & Labour for cleaning and repairingof all spray pipe lines of various size, laying on the floor inside the de-greasing washing chamber plantforalkaline chemicalandHot/coldwater pumping through this pipe and connected nozzels complete, dismatling / open the oulet valve of pipeor nozzle including coupling with packing near joining the pipecomplete drain out any remainingfrozen materials inside the pipe line and nozzels, making good any leakage in pipe line withnecessary gas cutting, welding , polishing, testing as per site requirement complete all as specified and as directed. |
| 3 | Material & Labour for overhauling of squirrel cage induction electric motor 3 phase 415 volts , 1455 RPMof capacity60 HP/45KW with pump setcomplete cleaning the impeller and dischage /suction casing of the pump including repairs to pumpcomplete with dismantling andre-assembly and testing NOTE:Rewinding of motor by super enamelled copper wire with class F insulation necessary disconnecting electric connections/ taking down and shifting to local workshop and brought back to site completly reassembled as per existing location . Lubrications oils and apply greasing to all moving parts. Repair/replacement, retrofit ,of all major/ minor parts i.e rotor,stator,winding,terminal box ,bearing, shaft , Fan, impeller , gland assembly, bearning assembly , coupling,Contact Terminals and checking and replacing the burnt cable glandsand consumableitems complete as per requirementfor smoothfunctioning ofmotor & pump set ,all materilas are deemed to beinclude in the quoted rate by the contractorall as specified and as directed. |
| 4 | All as per srl item No 3 here-in-before but motor of capacity 7.5 HP complete all as specified and as directed. |
| 5 | All as per srl item No 3 here-in-before but motor of capacity 5.0 HP complete all as specified and as directed. |
| 6 | All as per srl item No 3 here-in-before but motor of capacity 3.0 HP complete all as specified and as directed. |
| 7 | Taking down complete and supply & fixing in replacement of centrifugal air blower with motorof capacity10 HP, 3P,415 Volt coupled with blower including complete fitting suitable for car washing plant necessary retrofit as per site requirement complete all as specified and as directed. |
| 8 | Taking down complete and supply & fixing in replacement of centrifugal air blower with motorof capacity5 HP, 3P,415 Volt including complete fitting with existing suction / deliveryduct necessary retrofit as per site requirement complete all as specified and as directed. |
| 9 | Supply and fixing in replacement of foot valve heavy duty of size 50mm complete all as specified and as directed. |
| 10 | Supply and fixing in replacement of foot valve heavy duty of size 40 mm complete all as specified and as directed. |
| 11 | Supply and fixing in replacement of AC induction tubular heater 9 KW, 415 volts, 3 phase of length 1.5 mlength or as per sample with MS powder coated terminal cover as per sample complete all as specified and as directed. |
| 12 | Supply and fixing in replacement of industrial heating element capacity of 9 KW ,3P,415 volt, L shape , 2.6 Mtr length or as per samplewith MS powder coated terminal cover as per samplecomplete all as specified and as directed. |
| 13 | Supply and fixing in replacement of power contactor 3 pole, type MNX 18 with 1 NO/1 NC 415V AC3 rating complete all as specified & as directed. |
| 14 | Supply and fixing in replacement of power contactor 3 pole, type MNX 25 with 1 NO/ 1 NC 415V AC3 rating complete all as specified & as directed. |
| 15 | Supply and fixing in replacement of power contactors 3 pole, type MNX 70 complete all as specified and as directed. |
| 16 | Supply and fixing in replacement of power contactor 3 pole type MNX 140with 2NO+2NC complete all as specified and as directed. |
| 17 | Supply and fixing in replacement of digital temperature indicator 6100 as per sample,complete fitting and necessary wiring as per existing panel complete all as specified and as directed. (Make : Audiotronics or equivalent make as per ISI) |
| 18 | Supply and fixing in replacement of thermostat 62" long as per sampleincluding electrical connection complete, suitable for hot water tank as per sample complete all as specified and as directed. |
| 19 | Supply and fixing in replacement of stainless steel water Spray Nozzels 16LPM; 1/2 BSPwithnecessary gas cutting, welding , polishing, testing as per site requirement completeall as specified and as directed. |
| 20 | Taking down complete and Supply , installation, commissioning, testingin replacement inof centrifugal monoblock Pump set of capacity 12.5 HP,3000 RPM, 3 Phase 415 Volt with IP-44 protection including arrangement complete, mounting ,foundation and connecetd suction and delivery pipecomplete as per existingall as specified and as directed. |
| 21 | Taking down complete and Supply , installation, commissioning, testingin replacement of centrifugal monoblock Pump set of capacity 7.5 HP,3000 RPM, 3 Phase 415 Volt with IP-44 protection arrangement complete, mounting ,foundation and connected suction and delivery pipecomplete as per existingall as specified and as directed. |
| 22 | Taking down complete and Supply , installation, commissioning, , testingin replacement of centrifugal monoblock Pump set of capacity 3.0 HP,3000 RPM, 3 Phase 415 Volt with IP-44 protection including mounting ,foundation complete all as specified and as directed. |
| 23 | Supply and replacement of Exhaust fan heavy duty of size 600mm sweep of 900RPM, 3 Phase, 415 Volt, 50 Hz AC with metal body including all accessories, connections, testing, assembling and making good to disturbed surfaces of wall including taking down old unserviceable one complete all as specified and as directed. (Make : Model Turbo Force SP of Havells or equivalent in Bajaj/Philips/ Crompton Greaves) |
| 24 | Supply and replacement of Electro Hydraulic thrustor brake complete settype MDT150-18kg alongwith Thrustor type ST-520, 18 Kg and 150mm dia brake shoe liner complete with base frame complete all as specified and as directed. (Make: USGC or equivalent to Speedage/ Speed-O-Controls) |
| 25 | Supply and replacement ofMCB TP 25 Amp rating 415 volts, 16KA rupturing capacity complete with any retrofit work complete all as specified & as directed. |
| 26 | Supply and replacement ofMCB TP 32 Amp rating 415 volts, 16KA rupturing capacity,complete with any retrofit work thimbles, gland as per requirement inexisting panel complete all as specified and as directed. |
| 27 | Supply & Fixing in replacementMCB SP, 32 Amp rating 16 KA ,230 Volts rupturing capacity,complete with any retrofit work thimbles, gland as per requirement inexisting panel complete all as specified and as directed. |
| 28 | Supply and fixing in replacement of4 core4.0 Sqmm PVC insulated & round sheathedbright annealed copper conductorcable for voltage grade 1100 V as per IS: 694 complete all as specified & as directed. |
| 29 | Supply and fixing in replacement of3 core2.5 Sqmm PVC insulated & round sheathedbright annealed copper conductor cable for voltage grade 1100 V as per IS: 694 complete all as specified & as directed. |
| 30 | Supply and fixing in replacement of3 core4.0 Sqmm PVC insulated & round sheathedbright annealed copper conductor cable for voltage grade 1100 V as per IS: 694 complete all as specified & as directed. |
| 31 | Supply and fixing inreplacement of3 core6.0 Sqmm PVC insulated & round sheathedbright annealed copper conductorcable for voltage grade 1100 V as per IS: 694 complete all as specified & as directed. |
| 32 | Material & Labour for Servicingof Hull pullinggear box of ratio 70:1 type 400 with taking out gears , rope drum with rope & replacement of gear shaft , locks , gasket set,nuts & boltstop up gear oil of standard grade , greasing, energizer ofdefective control panel and accessories and also Rates to include replacement of minor spares (control copper wiring, aluminium lugs, nut bolts and cosumable items)complete all as specified and asdirected Note:- Other parts shall be measured and paid separately as supply only. |
| 33 | supply onlysteel wire rope size of 16 mm FMC construction 6 x 36 ungalvanised as per IS 2266/02 complete all as specified and as directed. |
| 34 | Supply only rotary typelimit switchRG/LS/4C , suitable for gear ratio 70:1 with 2 NO + 2 NC completeall as specified and as directed. |
| 35 | Supply and fixing in replacement of Switchdisconnector fuse TPN with HRC fuse and handle open execution type of size 250 Amp complete all as specified and as directed. |
| 36 | Supply and fixing in replacement of Switchdisconnector fuse TPN with HRC fuse and handle open execution type of size 160 Amp complete all as specified and as directed. |
| 37 | Material & Labour for replacement of Floating shaft made out of M.S. EN8 material medium carbon steel of Cylindrical shape of size 100 mm diaand 1.80 mtr length and shaft end both side machining with keyway slot as per sample weight approx. 110.98kg complete all as specified & as directed. |
| 38 | Material & Labour foroverhauling of helical rotor pump /chemical pump series RN with replacement of oil seal and ball bearingminor / major parts complete all as specified & as directed. (Make : Roto or equivalent make as per ISI) |
| 39 | Supply and fixing in replacement ofPneumatic Solenoid valve 100NB with Air Pipe & Pipe connected accessories and complete with electrical wiring upto control panel complete all as specified and as directed. (Make: Rotex/Trident/Aira (Model ECF50)) |
| 40 | Dismantling / taking down defective & rusted pH controller withaccessories and supply & fix pH controller with new SS enclosure outdoor type and wiring with copper cable not less than 1.5 sqmm ,complete all as specified & as directed. |
| 41 | Material & Labour for Servicing of centrifugal floor mountedID (Induced Draft) Fan of capacity 36000 CFM , V belt driven for ventilation system make of IEPL including their connected accessories completefor smooth functiononing with re-assembly and testing complete all as specified & as directed. NOTE: (a) Servicingto be done by auth service team. (b) Cleaning and inspecting all component part of ID fan i.e vibration checking, fan housing, fan balancing & vabration analysis, Nut & Bolt proper tighting,suction pressure,abnormal noise, V belt correctly aligned and properly streched, clean disassembled partcomplete. (c) Lubrication and greasing all movable parts i,e bearing shaft, (d) Repair/replacementofV belt, rollerbearing block, shaft ,V belt , in/out duct ,MS 20mm round bar studs of length 60cm 4 Nos to hold the blades firmly with welding, brazing parts required for smooth functioning of ID fan completeto included in the quoted rate by the contractor. |
| 42 | All as per srl item No 41here-in-before butcentrifugal floor mountedFD (Forced Draft) Fan of capacity 40000 CFM , V belt driven for ventilation system make of IEPL including their connected accessories complete all as specified and as directed. |
| 43 | M&L for overhauling of squirrel cage induction electric motor 3 phase 415 volts , 1475 RPMof capacity30 HP/22KW make of CG complete with re-assembly and testing complete all as specified & as directed. NOTE:Rewinding by super enamelled copper wire with class F insulation necessary disconnecting electric connections/ taking down and shifting to local workshop and brought back to site, dismantling and assembly, Lubrications oils and apply greasing to all moving parts and repair/replacementof all major/ minor parts i.e rotor, stator, winding, terminal box ,bearing, shaft , Fanitems as required to make motor smoothfunctional to be included in the quoted rate by the contractor. |
| 44 | Supply and fixing in replacement of paint spray guns HPLV Type - 59 or as per sample suitable for manual paintingand flexible PVC pipe heavy duty ISI mark not less than 15mm bore ,6 Mtrlong complete all as specified and as directed. |
| 45 | Material & Labour for replacement of floor paint filtersize 630 x 650 x 50mmMat Type – Class ‘A’ Glass Fiber Grade : G3 (EN779) Color : Green + White Thickness : 50 mm Weight : >250g/m2 Paint Hold Capacity : 2450 g/sqm Avg. Paint Arrest : 92% Rated Air Flow : 0.65 cum/sec Media Velocity : 2.5 m/sec InitialTemp Resistant : Up to 177 Degree ‘C’ Flame Resistant : Non Flammable complete with removal of old filter from floor after carefully taking out MS grating,removal of old filter and cleaning filter frame, replace filter media,refixinggrating complete all as specified & as directed. |
| 46 | Material & Labour for replacementof ceiling Air Filter Type : Progressively Structured ,PolyesterThermally Bonded Impregnated, Grade : F5 (EN779) Thickness : 22 mm ,Weight : 600g/sqm Dust Hold Capacity : 437g/sqm Avg. Dust Arrest : 94% Rated Air Flow : 900cum/hr Media Velocity : 0.25m/sec ,Temp Resistanto 100 Degreecomplete with removal of old filter from ceiling after carefully taking down ceiling support and refixing after replacement of filters complete all as specified and as directed. |
| 47 | Material & Labour for replacement of fine filterof size 600mmx600mmx150mm woven synthetic media housed in GI wire mesh, capacity of dust filtration up to 99% efficiency, the complete housing shall be fabricated out of 16 gz GI sheet,and double skinned insulation complete all as specified and as directed. |
| 48 | Material & Labour for overhauling compressor unit 9 KG/ Sqcm of make ELGI with replacement of compressor oil , air oil separator, oil filter primary and secondary, safety valve assembly, non return valve assembly,gasket set, fan belts, nuts & bolts, air pressure valves, complete items for smooth functioning of compressorincluded in quoted rate by the contractor all as specified and as directed. |
| 49 | Supply & fixing in replacement of defectiveAC heating elements6 KW, 415 volts, 3 phase of length 610mmcomplete fitting as per existing location all as specified and as directed. |
| 50 | Supply and fixing in replacement ofMCCB 4 pole, 415V AC, 250 Amp rating 35/36 KA rupturing capacity, thermal magnectic release, complete with any retrofit work, terminal links withthimbles, gland as per requirement inexisting panel complete all as specified and asdirected. |
| 51 | Supply and fixing in replacement ofMCCB 3 pole, 415V AC, 125 Amp rating 35 KA rupturing capacity, thermal magnectic release, complete with any retrofit work, terminal links terminal links withthimbles, gland as per requirement inexisting panel complete all as specified and as directed. |
| 52 | Supply and fixing in replacementof 04 x LED panel light of 36 watt Weather and Water proof (600mm x 600 mm Square PL Armstrong quadra series) with cabling to be done through SS Capping Argon Welded with SS walls of the washing chamber suitable to the existing site with all fixing accessories complete all as specified and directed by Engr-in-Charge. (Make: Syska SSK-PL-36WSQ 5.7K or equivalent in Bajaj/ Phillips/ Havells) |
| 53 | Material & Labour for taking out motor from 15HP ,1400 RPM blower set andrewinding of electric motor squirrel cage induction 15 HP, 1400 RPM, 415 Volts 3 Phase, 50 Hz with super enamelled copper wire of superior quality as per existing guage including varnishing, insulating materialincluding reassembling fixing with suction & dischage duct in position making connection testing and commissioning complete all as specified & as directed. |
| 54 | All as per srl item No 53 here-in-before but blower motor of capacity 10 HP complete all as specified and as directed. |
| 55 | Supply and fixing in replacement of defectivehull resting trolly wheel OD 410mmx95mm and wheel collar thickness 15mm and depth of collar 25mm and wheel centre bored 60mm with key slot with six no supporting rives made out of M.S forging /M.S casting E.N.8 material complete all as specified and as directed. |
| 56 | Repair/replacement Sliding gate motors kitfor the automation of sliding gates up to 400 kg, 24V DC, incorporated control unit with following accessories (a) RB 400,irreversible electromechanical gear motor-01 Nos (b)OXI, Receiver -01 Nos (c ) ON2E, Transmitter-01 Nos (d) MOFB, pair of photocell-01 Nos (e) MOSE, key selector -01 Nos (f) MLBT, Flashing Light-01 Nos.And along with repairofautomatic industrial sliding door of size4.9mx3.25m with alignment bottom & top track, replacement of gasketto ensure complete air tightness along bottom, top and side wall, complete all as specified & as directed. (Make:Nice or equivalent make as per ISI) |
| 57 | Taking down complete and Supply & fixing in replacement ofgun metal vertical NRV 40mm heavy duty complete with fittings all as specified & as directed. |
| 58 | Servicing of servo voltage stablizer of capacity 150 /100 KVA 415 Volt ,50Hz of make VOLINA by disconnecting of all electrical connections of stabilizer and check the auto/manual function of stabilizer, to be check the oil level and topup, oil seals leakage if any, check all volt meters and amp meter working condition or not, Taking out top cover of stabilizer for replacing defective parts/items clean the dust by air blower, check the neutral and earthing connections properly or not, to be done properly, to be check the all nut bolts tightining. and refixing, the same in existing location, and re connect all the incoming/outgoing cables properly including testing and commissioning complete all as specified and as directed. Note: (i) Spares parts if required shall be measured & paid separately as ‘supply only’ under relevant items. (ii) Labour charge for ‘supply only’ materials are deemed to be included in the quoted rate by the contractor. |
| 59 | Supply onlyServo motor 3 K.G. torque single phase. |
| 60 | Supply onlyof dimmer coil 60 amp . |
| 61 | Supply only of Main Transformer 100/150 KVA |
| 62 | M&L for replacement ofdamage chemical filter jacketmade out of 3mm SS sheet of size 800mm x490mmor as per existing sample / model . Jacket holding flange s.s round on the upper side of size 40mm x 3mm along with suitable size mounting holes /lifting hook. Wiremess of nominal dia 0.56mm and apperture 1.18mm bend into shape for fixing in side in jacket complete fitting all as specified and as directed. |
| 63 | Supply and fixing in replacement of power contactor 3 phase MNX series type or as per existing sample / model of rated capacity 6 Amp to 9 Amp 415volts along with suitable rating of NC/NO type Auxiliary contactor block complete all as specified and as directed. |
| 64 | Supply andreplacement of rubber gasket of size 60mmx5mm mounted on hull painting sliding gate by adhesive with flap on both sides along the length of size 3370mm gate complete all as specified & as directed. |
| 65 | Supply andreplacement of defective Car wash Brush suitable for existing automatic car washing plant or as per sample complete all as specified and as directed. (Make - as per ISI mark) |
| 66 | Supply and replacement ofBrush Rivite forsuitable for automatic car washingbrushor as per sample complete all as specified and as directed. (Make - as per ISI mark) |
| 67 | Supply andreplacement of DOL starter Three Phase 415 voltsuitable for 5.0 HP pump set complete all as specified and as directed. |
| 68 | Supply andreplacement of DOL starter Three Phase 415 voltsuitable for 3.0 HP pump set complete all as specified and as directed. |
| 69 | Supply andreplacement of defective detergent pump capacity as per sample for car washing plant all as specified and as directed. |
| 70 | Supply andreplacement ofMCCB FP 250Amp36KA 415V AC , Thermal magnetic release alonwith powder coated SS enclosure 2mm thick suitable lock arrangement andgland ,thimble for cable, wall mounting type with cable connection complete all as specified and as directed. |
| 71 | Supply andreplacement of copperBus bar chamber 300Amp TPN 4 strip equal size with powder coatedSS enclosure 2mm thick alongwith suitable gland ,thimble for cable, wall mounting type with cable connection complete all as specified and as directed. |
| 72 | M &L for Painting steel and iron surfaces with preparation of old painted surface andrust free,and anti-corrosive paint.,filling cavities with suitablefiller material and apply on sheet with paint two coats of synthetic enamelpaint over a coat of red oxide paint as per existing colour matching complete all as specified and as directed. |
| 73 | Taking down complete andSupply, installation and testing of three cylinder double gun extra heavy duty high pressure Car washing pumpmodel of TCTW. 300RPM,650-700 PSI ,42-45 Kgf./Cm.Sq, including 5.0.HP motor,1440 RPM three phase 415 Volt,50Hz pressure tank, filling suitable oil, pressure pipe up to 15 Mtr, pulley with base frame complete mounting as per existing location and connected to the motor with the help of V belt , pipe line in /out complete all as specified and as directed. (Make : HIMALAYA AGRO PUMPS PVT LTD or equivalent make as per ISI) |
| 74 | Taking down complete andSupply, installation and testing of two cylinder single gun extra heavy duty high pressure Car washing pumpmodel of DCCW320RPM, 300-320 PSI , including 3.0.HP motor,1440 RPM three phase 415 Volt,50Hz pressure tank, filling suitable oil, pressure pipe up to 15 Mtr, pulley with base frame complete mounting as per existing location and connected to the motor with the help of V belt , pipe line in /out complete all as specified and as directed. (Make: HIMALAYA AGRO PUMPS PVT LTD or equivalent make as per ISI) |
| 75 | Supply and replacementof Stainless Steel filter of the hull washing chamber with suitable mesh size and pattern of nominal dia 0.56mm and a aperture hole 1.18mm alongwith suitable size of SS angle for supporting to around the wiremesh plate complete fabricationinto rectangular shape size of 0.3M ( width) X 1.8 M (Length) or as per existing sample complete with necessaryretrofit work all as specified and as directed. |
| 76 | Servicing and maintenance of Automatic Car washing Plant having three brush system with wasable dimension 1.8 X 2.0 x 5.0 mtr make of KRE installed at TPT ASC Coy alongwith 02 Nos heavy duty washing pump and other connected accessorieswith all testing for smooth functioning of equipment complete all as specified and as directed. NOTE: (a) Servicingto be done by auth service team once in month. (b) The contractor will also send technician on call basis in case of any fault and work will be carried out by well qualified technician having good experience in the repairing field ofautomatic car washing machine. (c) Cleaning and inspecting all component part of Automatic Car washing Machine alongwith 02 Nos heavywashing pump seti.echecking bruising system alignment and smooth movement of up and down direction with rotation, fan housing, Air blower balancing & vibration analysis, Nut & Bolt proper tighting,,abnormal noise,V belt correctly aligned , PLC based control panel , alignment of rail track, wax pump,wheels , wiring system, Gear box, GI pipe line with nozzles complete connected parts of equipment. (d) Lubrication and greasing all movable parts of equipment complete in each month (e) Repair/replacementofV belt, bearing of blower, shaft ,oil for pump, on/off push button, locking arrangement of panel, pressure pipe,nozzles,and other consumable items of equipment completeto included in the quoted rate by the contractor all as specified and directed. |
| 77 | Supply and fixing in replacement of Bearing with plumberBlock No. SYJ80TF ofcomplete mounting in existing place alongwith any retrofit work complete all as specified and as directed |
| 78 | Repairing andblocking ofexisting seepage and leakage of water and chemicals fromDe-greasing plants through wall/floor/ceiling and tank of alkaline /fresh water /hot watermade out stainless steel sheet ,16 gauge rectification complete by suitable size SS electrode rod ,argon cylinder, with the help of Argon welding machine and ,filling cavities with suitablefiller materialfor SS sheet complete all as specified and as directed. Note:- Argon welding machine with SS electrode rode/wire, gas cylinderand their connected other machine and man power for above work will beincluded in the quoted rate by the contractor. |
| 79 | Supply and fixing in replacement of Stainless Steel sheet 304 grade ,1.6mm ( 16 gauge) thick including necessary cutting ,jointing,welding,and grinding in the shape/size as per requirement in washing chamber of De-greasing plant. Replacedamage SS sheet with new SS sheet by the SS electrode and with the help of Argon welding machine for jointing between SS sheet and after the work is done,it will be thoroughly checked/testedthat there is no any leakage and cracking from replaced SS sheet complete all as specified and as directed. |
| 80 | Supply and replacement of cotton filter press of size 60 X 60 cm complete all as specified and as directed. |
| 81 | Supply & fixing in replacement of Step Down Transformer double bound type 415/220V AC 1KVAcomplete all as specified & as directed. |
| 82 | Material & Labour for PCC 1:3:6 typeC-1 using 40 mm graded stone aggregate as in foundation filling and mass concrete for motor and floor ofbasement including necessary formwork of degreasing plant and hull painting complete all as specified and as directed. |
| 83 | Supply and fixingof2.5 Sqmm singlecore wire multi stranded copper conductor ,PVC insulated . FRLS insulated ,unsheathed cable 1100 volts grade including complete all as specified and as directed. |
| 84 | Supply and fixingof4.0 Sqmm singlecore wire multi stranded copper conductor ,PVC insulated . FRLS insulated ,unsheathed cable 1100 volts grade including complete all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
