}

Supply And Fixing Of Laboratory Furniture For Cluster University At Ggm Science College, Jammu- 1 Providing And Fixing Sefa -8M / Sefa-10 Compliant ‘C’ Frame System Made Up Of 60 Mm X 30 Mm Rectangular Pipe Of 2 Mm Thickness, With Frame Having 3 Proje, jammu-Jammu And Kashmir

Public Works Department-PWD has published Supply And Fixing Of Laboratory Furniture For Cluster University At Ggm Science College, Jammu- 1 Providing And Fixing Sefa -8M / Sefa-10 Compliant ‘C’ Frame System Made Up Of 60 Mm X 30 Mm Rectangular Pipe Of 2 Mm Thickness, With Frame Having 3 Proje. Submission Date for this Tender is 27-06-2022. Kitchen Equipment Tenders in jammu Jammu And Kashmir. Bidders can get complete Tender details and download the document.




Tender Notice

32782064
Supply And Fixing Of Laboratory Furniture For Cluster University At Ggm Science College, Jammu- 1 Providing And Fixing Sefa -8M / Sefa-10 Compliant ‘C’ Frame System Made Up Of 60 Mm X 30 Mm Rectangular Pipe Of 2 Mm Thickness, With Frame Having 3 Proje
Open Tender
Indian
Jammu And Kashmir
jammu
27-06-2022

Tender Details

Supply And Fixing Of Laboratory Furniture For Cluster University At Ggm Science College, Jammu- 1 Providing And Fixing Sefa -8M / Sefa-10 Compliant ‘C’ Frame System Made Up Of 60 Mm X 30 Mm Rectangular Pipe Of 2 Mm Thickness, With Frame Having 3 Projecting Pipe Sections Of 60 Mm X 30 Mm With Thickness Of 2 Mm On The Back; With The Leveller At The Bottom. All Frame Work Must Be Pre - Treated With Superior Pure Epoxy Powder Coating Of 50 - 60 Micron. L-700 Mm X H - 875 Mm X D -30 Mm. The C - Frames Should Have Enough Strength For Suspending Storage Cabinets Capable Of Fully Carrying The Load Of Worktops. Its Superior Strength Combined With Aesthetically Appealing End Caps Shall Give Maximum Flexibility And Modularity While Making A Layout. 2 Providing & Fixing Horizontal Connecting Sets Should Comprise Of 4 Elements. One Front Connecting Beam & One Back Connecting Beam, Each Made Up Of 2 Mm Thick Sheet Formed In A “C” Section, Beams Are Removable. One Bottom Skirting Type Connecting Bar & One Centre Beam Should Be Placed Between Back Beam & Skirting Beam. Together With The C Frames & Horizontal Members Connected Together, The Skeletal Structure Of The Work-Bench Is Formed On Which The Worktop Can Be Placed & The Hanging-Type Storage Cabinets Can Be Suspended. 3 Connecting Set Of L-1500 Mm For C Frame Structure 4 Connecting Set Of L-1350 Mm For C Frame Structure 5 Connecting Set Of L-1200 Mm For C Frame Structure 6 Connecting Set Of L-850 Mm For C Frame Structure 7 Connecting Set Of L-750 Mm For C Frame Structure 8 Connecting Set Of L-600 Mm For C Frame Structure 9 Supply & Fixing Of Storage Boxes Made Up 100% Epoxy Powder Coated Crca Virgin Tata ® / Mittal Arcelor Make Sheet, Powder Coating Thickness Of 50 - 60 Microns, Sheet Thickness Of 0.8 Mm For All Body, Shutters & Drawers Are Of Sandwich Type. All Modules Should Go In Knock Down Condition & Assembled & Fitted At Site. Shutters Should Have Exposed S.S.-304 Butt Hinges Or Self Closing Ced Coated Concealed Hinges. All Joinery Hardware Is To Be Of Ss-304 Bolting System. Handles Should Be “D” Type Made Up Of Ss-304, 8 Mm Thick Solid Rod, With Nickel-Chrome Plating And Further A Lacquer Coat. 10 Storage Size, L-600 Mm X D-530 Mm X H-635 Mm, 1 Drawer / 2 Shutters 11 Storage Size, L-750 Mm X D-530 Mm X H-635 Mm, 1 Drawer / 2 Shutters 12 Corner Storage Size-L-850+850Xd-530Xh-635 Mm, 1 Shutter 13 Supply & Fixing Of Sink Storage Boxes Fitted With Sink, Made Up Of 5 Mm Thick High Density And Elastic Polypropylene With Bowl Size ( L X W X D ) Is 560 X 340 X 245Mm. Each Sink To Be Provided With A Bottle Trap & Hose Pipe. A 3-Way Tap To Be Be Provided With The Sink Unit, Which Should Have 2 Fixed Bib Cocks & One Swan Neck Swivel Cock Made In Brass And Heavy Duty Knobs. 360 Swing Goose Neck Spout With Brass Head Work. Storage Boxes Are Made Up 100 % Epoxy Powder Coated Crca Virgin Tata ® Make Sheet Powder Coating Thickness Of 50-60 Microns, Sheet Thickness Of 0.80 Mm For Body, Shutters & Drawers Are To Be Sandwich Type. All Modules Should Go In Knock Down Condition And Assembled And Fitted At Site. Shutters Should Have Exposed S.S. - 304 Butt Hinges With Rotary Catcher Closing Mechanism ( Preferable With Pp Rollers To Have Longer Life ) Or Self Closing Ced Coated Concealed Hinges. All Our Joinery Hardware Is To Be Of Ss-304 Bolting Systems. Handles Should Be “D” Type Made Up Of Ss-304, 8 Mm Thick Solid Rod, With Nickel-Chrome Plating And Further A Lacquer Coat. 14 Sink Storage Size-L-600Xd-530Xh-635 Mm, 2 Shutters 15 Corner Sink Storage Size-L-850+850Xd-530Xh-635 Mm, 1 Shutter 16 Supply And Fixing Of Knee Space Having One Footrest Made Up Of 1Mm Thick Sheet ( 25 X 50 X 25 Mm ) C Channel Type And Openable Back Cover Panel Of 0.8 Mm Thickness With Length As Per Requirement. 17 L-600 Mm 18 L-750 Mm 19 End Cover Panel For 750Mm Counter Depth, With Standing Height 20 C Frame Back Cover Sheet In 0.8 Mm Thickness H-875 Mm 21 Space Filler Of For The Last C Frame 22 Providing And Fixing Two Tier Regent Rack To Be Fixed At Suitable Places Wherever Required, All Vertical End Pillars And Horizontal Shelves To Be Made Of 1 Mm Thick Crca Sheet, Front, Back Cover & Inside Panels To Be Made Out Of 0.8 Mm Thick Crca Sheet, With Both Sides Epoxy Based Powder Coated With Complete Modular Design Consisting Of 2 Stage Horizontal Storage Shelves; With An Integrated Raceway Of Minimum Height So As To Provide Maximum Storage Space. Cover Panles Should Have One Cutout For 6 Module Plate ( On Each Side Of Island Regent And One Side Of Wall Regent Rack ) For Electrical Switches And Sockets. 23 Regent Shelf 2 Tier, Size L-1200 X D-300 X H-650 Mm 24 Reagent Shelf 2 Tier, Size L-900 X D-300 X H-650 Mm 25 Single Sided Crca Electrical Raceway Max L-2M, H-125 X D-85 Mm Top / Wall Mounted With 3 Nos. 6 Module Cut-Outs 26 Providing And Fixing Electrical Sockets Procured From Norisys / Legrand / Anchor Roma Or Equivalent To Be Placed On The Face Of The Regent Rack. Each Set Comprising Of 1 No. 6 M Plate, 1 No. 6A Switch & Socket, 1 No. 20A Switch & Socket ( Without Wiring ) Electrical Sockets Should Be Read As Providing And Fixing Electrical Sockets In 6 Module Plates Having One Number 5 / 15 Amps Switch And Socket And One Number 16 Amps Switch And Socket Of Northwest / Anchor Roma / L&T / Norisys Make With 2.5Sqmm Frls Cable Complete With Internal Wiring. 27 Providing And Fixing Of The Worktops Is 18 Mm ± 2 Mm Jet ( Z ) -Black Granite Of An Even Surface. The Exposed Edges Of The Granite Should Be Chamfered And Smoothened. Granite Should Have Packing Of 6 Mm X 30 Mm Neoprene Underneath So As To Have Dampening Effect And Better Absorption Of Vibration. 28 Pegboard - Acrylic With 23 Pegs Made Of Acrylic With 23 Pp Pegs And Ss 304 Collection Tray. Preferred Makes : : Premier Polymers, Space Plus Design Labs. 29 2-Way Eye Wash With Preferred Makes : Premier Polymers 30 Overhead Storage Size-L-750Xd-375Xh-675 Mm, Openable Shutters With Glass 31 Lab Stool In Ss-304 Adjustable Height, Pipe Frame 32 Laboratory Chair- Medium Rise With Ring 33 Wooden Table Size L-900 X W-900 X H-750 Mm Working Top 25Mm Thick, Prelaminated Partcle Board 2Mm Pvc Edgebanding, Gable End & Modesty Panel 18Mm Plpb. 34 Wooden Table Size L-600 X W-600 X H-750 Mm Working Top 25Mm Thick, Prelaminated Partcle Board 2Mm Pvc Edgebanding, Gable End & Modesty Panel 18Mm Plpb. 35 Wooden Table Size L-900 X W-600 X H-750 Mm Working Top 25Mm Thick, Prelaminated Partcle Board 2Mm Pvc Edgebanding, Gable End & Modesty Panel 18Mm Plpb. 36 Full Height Fume Hood ( Cav ) Overall Dimension- L- 1500 X D-900 X H - 2400 Mm Upper Structure Made Of Heavy Duty Crca / Gi Outer Dimension - 1500 X 900 X 1500 Mm. Inside Working Volume- 1250 X 740 X 1200Mm 37 2 Nos. Under Counter Storages Made In Crca Powder Coated, Size- L- 750 X D- 530 X H- 725 Mm With Casters 38 Robust Heavy Duty Frame With Connecting Sets & Covering Plates To Take Load Of Fume Hood Overstructure. Overall Size- L- 1500 X D-850 X H-900 Mm 39 Centrifugal Blower Of 1.5 Hp 2800 Rpm, 600 To 2200 Cfm, Static Pressure 0 To 140 Wcmm Moulded Propylene Impeller, Crompton / Equivalent Motor 40 Cu. Flex. Cable 2.5 Sqmm X 4 Core Of Reputed Brand ( Lapp / Finolex / Polycab / Havells Or Equivalent ) From Fume Hood Control Panel To Blower Or Spot Extractor / Ductable Chemical StorageS Switch To Blower. 41 Polypropylene Glass Lined Sheet ( Pp-Gl ) And Fibre Reinforced Polyster ( Frp ) Ducting - Rigid Ducting Of Pp-Gl ( Thickness 2 Mm ) + Frp ( Thickness 1 Mm ) , Along With Flexible Ducting ( Wherever Required ) , Complete With Flanges, Bends, T-Connectors, Damper Transition, Clamps, Etc. 42 Full Height Storage With Glass In Shutter, Size H-1800 X W-1000 X D-480 With 4 Shelves Making 5 Compartments, And Having 4 Shutters With Floating Glass And Inner Frp Lining 43 Centrifugal Blower Of 1 Hp 2800 Rpm, 600 To 2200 Cfm, Static Pressure 0 To 120 Wcmm Moulded Propylene Impeller, Crompton / Equivalent Motor 44 Centrifugal Blower Of 0.5 Hp 900 Rpm, 300 To 800 Cfm, Static Pressure 0 To 20 Wcmm, Moulded Propylene Impeller, Crompton / Equivalent Motor 45 Rigid Polyprpylene / Pvc Ducting - 100 / 150 Mm Dia, Along With Flexible Pipe, Complete With Bends, T-Connectors, Etc. 46 Providing And Fixing Aluminum Work In 14 Gauge For Doors, Windows, Ventilators And Partitions With 50 Microns Powder Coating Extruded Built Up Standard Triangular Sections / Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is:733 And Is:1285, Fixed With Dash Fastener Of Required Dia , And Size Including Necessary Filling Up Of Gaps At Junctions I.E., At Top, Bottom And Sides With Required Epdm Rubber / Neoprene Gasket Felt Etc. Aluminum Sections Shall Be Smooth, Must Free, Straight, Mitered And Joined Mechanically Wherever Required Including Cleat Angle, Prelam Board For Partitioning, Glazing For Doors 5Mm / 8Mm Aluminum Snap Beading For Glazing / Paneling C.P. Brass / Stainless Steel Screw, All Complete As Per Architectural Drawings And The Directions Of Engineer-In -Charge.

Key Value

Document Fees
INR 3000 /-
EMD
INR 389140.0 /-
Tender Value
INR 1.94 Crore /-

BOQ Items

Name of Work:-Supply and Fixing of Laboratory Furniture for Cluster University at GGM Science College, Jammu
Sl. No. Item Description
1Providing and Fixing SEFA -8M/SEFA-10 Compliant ‘C’ Frame System made up of 60 mm x 30 mm rectangular pipe of 2 mm thickness, with Frame having 3 projecting pipe sections of 60 mm x 30 mm with thickness of 2 mm on the back; with the leveller at the bottom. All frame work must be pre - treated with superior pure epoxy powder coating of 50 - 60 micron. L-700 mm x H - 875 mm x D -30 mm. The C - Frames should have enough strength for suspending storage cabinets capable of fully carrying the load of worktops. Its superior strength combined with aesthetically appealing end caps shall give maximum flexibility and modularity while making a layout.
2Providing & Fixing Horizontal Connecting Sets should comprise of 4 elements. One Front Connecting Beam & One Back Connecting Beam, each made up of 2 mm thick Sheet formed in a “C” section, Beams are removable. One Bottom Skirting type connecting Bar & One Centre Beam should be placed between Back Beam & Skirting Beam. Together with the C Frames & Horizontal Members connected together, the skeletal structure of the work-bench is formed on which the worktop can be placed & the hanging-type storage cabinets can be suspended.
3Connecting Set of L-1500 mm for C Frame Structure
4Connecting Set of L-1350 mm for C Frame Structure
5Connecting Set of L-1200 mm for C Frame Structure
6Connecting Set of L-850 mm for C Frame Structure
7Connecting Set of L-750 mm for C Frame Structure
8Connecting Set of L-600 mm for C Frame Structure
9Supply & Fixing of Storage Boxes made up 100% Epoxy Powder Coated CRCA Virgin TATA ® / MITTAL ARCELOR make Sheet, powder coating thickness of 50 - 60 microns, Sheet Thickness of 0.8 mm for All Body, Shutters & Drawers are of sandwich type. All Modules should go in Knock Down condition & assembled & fitted at site. Shutters should have exposed S.S.-304 butt hinges or Self Closing CED Coated Concealed Hinges. All joinery Hardware is to be of SS-304 Bolting system. Handles should be “D” type made up of SS-304, 8 mm thick Solid Rod, with nickel-chrome plating and further a Lacquer Coat.
10Storage Size, L-600 mm x D-530 mm x H-635 mm, 1 Drawer / 2 Shutters
11Storage Size, L-750 mm x D-530 mm x H-635 mm, 1 Drawer / 2 Shutters
12Corner Storage Size-L-850+850xD-530xH-635 mm, 1 Shutter
13Supply & Fixing of Sink Storage Boxes fitted with Sink, made up of 5 mm thick high density and elastic polypropylene with bowl size (L x W x D) is 560 x 340 x 245mm. Each sink to be provided with a bottle trap & hose pipe. A 3-way Tap to be be provided with the Sink Unit, which should have 2 fixed Bib Cocks & One Swan Neck Swivel Cock made in Brass and heavy duty knobs. 360" Swing Goose Neck Spout with Brass Head Work. Storage boxes are made up 100 % Epoxy powder coated CRCA Virgin TATA ® make Sheet powder coating thickness of 50-60 microns, Sheet Thickness of 0.80 mm for Body, Shutters & Drawers are to be sandwich type. All Modules should go in Knock Down condition and assembled and fitted at site. Shutters should have exposed S.S. - 304 butt hinges with Rotary Catcher closing mechanism (preferable with PP rollers to have longer life) or Self Closing CED Coated Concealed Hinges. All our joinery Hardware is to be of SS-304 Bolting systems. Handles should be “D” type made up of SS-304, 8 mm thick Solid Rod, with nickel-chrome plating and further a Lacquer Coat.
14Sink Storage Size-L-600xD-530xH-635 mm, 2 Shutters
15Corner Sink Storage Size-L-850+850xD-530xH-635 mm, 1 Shutter
16Supply and fixing of Knee Space having one Footrest made up of 1mm thick sheet (25 x 50 x 25 mm) "C" Channel type and openable Back Cover Panel of 0.8 mm thickness with length as per requirement.
17L-600 mm
18L-750 mm
19End Cover panel for 750mm Counter Depth, with Standing Height
20C" Frame Back Cover Sheet in 0.8 mm Thickness H-875 mm
21Space Filler of for the last "C" Frame
22Providing and fixing two tier regent rack to be fixed at suitable places wherever required, All Vertical End Pillars and Horizontal Shelves to be made of 1 mm thick CRCA sheet, Front, Back Cover & Inside Panels to be made out of 0.8 mm thick CRCA Sheet, with both sides epoxy based powder coated with complete modular design consisting of 2 stage horizontal storage shelves; with an integrated Raceway of MINIMUM HEIGHT so as to provide maximum storage space. Cover Panles should have One cutout for 6 Module Plate (on each side of Island Regent and One side of Wall Regent Rack) for electrical switches and sockets.
23Regent Shelf 2 Tier, Size L-1200 x D-300 x H-650 mm
24Reagent Shelf 2 Tier,Size L-900 x D-300 x H-650 mm
25Single Sided CRCA Electrical Raceway max L-2m, H-125 x D-85 mm Top/Wall Mounted with 3 Nos. 6 Module Cut-outs
26Providing and Fixing electrical sockets procured from NORISYS/ LEGRAND/ ANCHOR ROMA or equivalent to be placed on the face of the Regent rack. Each set comprising of 1 No. 6 M Plate, 1 no. 6A Switch & Socket, 1 no. 20A Switch & Socket (without wiring) electrical sockets should be read as Providing and Fixing Electrical sockets in 6 Module plates having one number 5/15 Amps switch and socket and one number 16 Amps switch and socket of Northwest / Anchor Roma/ L&T / Norisys make with 2.5sqmm FRLS cable complete with internal wiring.
27Providing and Fixing of the worktops is 18 mm ± 2 mm Jet(Z)-black Granite of an even surface. The exposed edges of the granite should be chamfered and smoothened. Granite should have packing of 6 mm x 30 mm Neoprene underneath so as to have dampening effect and better absorption of vibration.
28Pegboard - Acrylic with 23 Pegs made of acrylic with 23 PP pegs and SS 304 collection tray. Preferred makes : : Premier Polymers, Space Plus Design Labs.
292-way Eye Wash with preferred makes : Premier Polymers
30Overhead Storage Size-L-750xD-375xH-675 mm, openable shutters with Glass
31Lab Stool in SS-304 Adjustable Height, Pipe Frame
32Laboratory Chair- Medium rise with ring
33Wooden Table Size L-900 x W-900 x H-750 mm Working top 25mm thick, prelaminated partcle board 2mm PVC edgebanding, Gable end & Modesty Panel 18mm PLPB.
34Wooden Table Size L-600 x W-600 x H-750 mm Working top 25mm thick, prelaminated partcle board 2mm PVC edgebanding, Gable end & Modesty Panel 18mm PLPB.
35Wooden Table Size L-900 x W-600 x H-750 mm Working top 25mm thick, prelaminated partcle board 2mm PVC edgebanding, Gable end & Modesty Panel 18mm PLPB.
36Full Height Fume Hood (CAV) Overall Dimension- L- 1500 x D-900 x H - 2400 mm Upper Structure made of Heavy Duty CRCA / GI Outer Dimension - 1500 x 900 x 1500 mm. Inside Working Volume- 1250 x 740 x 1200mm
372 Nos. Under Counter Storages made in CRCA Powder Coated, Size- L- 750 x D- 530 x H- 725 mm with Casters
38Robust Heavy Duty Frame with Connecting Sets & Covering Plates to take load of Fume Hood Overstructure. Overall size- L- 1500 x D-850 x H-900 mm
39Centrifugal Blower of 1.5 HP 2800 RPM, 600 to 2200 cfm, Static Pressure 0 to 140 WCMM Moulded Propylene Impeller, Crompton/equivalent Motor
40Cu. Flex. Cable 2.5 Sqmm x 4 Core of reputed brand (LAPP / FINOLEX / POLYCAB / HAVELLS or equivalent) from Fume Hood Control Panel to Blower or Spot Extractor/Ductable Chemical Storage"s Switch to Blower.
41Polypropylene Glass Lined Sheet (PP-GL) and Fibre Reinforced Polyster (FRP) Ducting - Rigid Ducting of PP-GL (Thickness 2 mm) + FRP (Thickness 1 mm), along with Flexible ducting (wherever required), complete with flanges, bends, T-connectors, damper transition, clamps, etc.
42Full Height Storage with Glass in Shutter, Size H-1800 x W-1000 x D-480 with 4 shelves making 5 compartments,and having 4 shutters with floating glass and inner FRP lining
43Centrifugal Blower of 1 HP 2800 RPM, 600 to 2200 cfm, Static Pressure 0 to 120 WCMM Moulded Propylene Impeller, Crompton/equivalent Motor
44Centrifugal Blower of 0.5 HP 900 RPM, 300 to 800 cfm, Static Pressure 0 to 20 WCMM, Moulded Propylene Impeller, Crompton/equivalent Motor
45Rigid Polyprpylene / PVC Ducting - 100/150 mm Dia, along with Flexible Pipe, complete with Bends, T-connectors, etc.
46Providing and fixing aluminum work in 14 Gauge for doors, windows, ventilators and partitions with 50 microns powder coating extruded built up standard triangular sections/appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixed with dash fastener of required dia , and size including necessary filling up of gaps at junctions I.e., at top, bottom and sides with required EPDM rubber/ neoprene gasket felt etc. Aluminum sections shall be smooth, must free, straight, mitered and joined mechanically wherever required including cleat angle,Prelam board for partitioning, Glazing for Doors 5mm/ 8mm Aluminum snap beading for glazing/paneling C.P. brass/ stainless steel screw, all complete as per architectural drawings and the directions of Engineer-in -Charge.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail