Supply Of Various Type Of Alu. Crimping Lug, Empire Tape And Tailless Unit For Maintenance Work Under Jurisdiction Of E.U.D.C.-I, Prayagraj Refer To Tender Description , Solder Less Aluminium Crimping Type, Aluminum Tube Terminal Barrel Lugs Dowels Or Its, prayagraj-Uttar Pradesh

Supply Of Various Type Of Alu. Crimping Lug, Empire Tape And Tailless Unit For Maintenance Work Under Jurisdiction Of E.U.D.C.-I, Prayagraj Refer To Tender Description , Solder Less Aluminium Crimping Type, Aluminum Tube Terminal Barrel Lugs Dowels Or Its Equivalent Make Suitable For Various Sizes Conforming To Iss : 5082 For Aluminium Lugs For Tubing Terminal Or Latest Amendment. The Lugs Should Be Smooth And Threaded For Proper Crimping Of Sizes Given Below :- , Al. Crimping Lugs Suitable For Size 240 Sq Mm. , Al. Crimping Lugs Suitable For Size 400 Sq Mm. , Al. Crimping Lugs Suitable For Size 630 Sq Mm. , Al. Crimping Lugs Suitable For Size 800 Sq Mm. , Empire Tape 20 Mm X 50 Mtrs Long Roll As Per Relevant Iss. , Henley Type Tailless Unit 300 Amps. 650 Volts Conforming To Henley Standard Manufactured From 18 Swg Ms Sheet Duly Painted With Two Coats Grey Enameled Paint With One Coat Red Primer. The Ms Sheet Having 7 Holes Suitable For 6 Nos. Top & Bottom Insulator And One Hole For Neutral. The Top & Bottom Insulator Should Be Fitted By 6 Nos. Hexagonal Clamps With 6 Nos. Brass Sheet For Tightening The Metal Part Connector And 6 Nos. Copper Spring Contact (Made For Copper Strip Of Size 35X4 Mm) 3 Nos. L Contact One No. Neutral Phase With Contact Including 3 Nos. Metal Part Connector For Holding Busbar/Alum. Cable. Tailless Unit Should Be 54 Length And 5½ Width Including Nuts & Bolts And Washer. The Ms Sheet Patti Have Drilled Hole At Bottom For Tightening And One Casted Sheet Strips With Drilled Hole At The Copper Point Of Ms Sheet For Tightening With Base. , Henley Type Tailless Unit 500 Amps. 650 Volts Conforming To Henley Standard Manufactured From 18 Swg Ms Sheet Duly Painted With Two Coats Grey Enameled Paint With One Coat Red Primer. The Ms Sheet Having 7 Holes Suitable For 6 Nos. Top & Bottom Insulator And One Hole For Neutral. The Top & Bottom Insulator Should Be Fitted By 6 Nos. Hexagonal Clamps With 6 Nos. Brass Sheet For Tightening The Metal Part Connector And 6 Nos. Copper Spring Contact (Made For Copper Strip Of Size 44X4.5 Mm) 3 Nos. L Contact One No. Neutral Phase With Contact Including 3 Nos. Metal Part Connector For Holding Busbar/Alum. Cable. Tailless Unit Should Be 54 Length And 5½ Width Including Nuts & Bolts And Washer. The Ms Sheet Patti Have Drilled Hole At Bottom For Tightening And One Casted Sheet Strips With Drilled Hole At The Copper Point Of Ms Sheet For Tightening With Base.

INR 1180 /-

INR 8.60 Lakhs /-