Construction Of Odisha Adarsha Vidyalaya At Keseipali Under Bhatli Block In The District Of Bargarh (Balance Work) Building Work (Civil, Ei, Ph)
Tender Value
73.81 Crore
Estimated cost
Bid Submission
06 Jul 2022
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bhatli → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Odisha Adarsha Vidyalaya At Keseipali Under Bhatli Block In The District Of Bargarh (Balance Work) Building Work (Civil, Ei, Ph)
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 24-Jun-2022 | 1st Corrigendum | Other | 06-Jul-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | Civil WorkLabour for cleaning the floor surface & perphery cleaning etc all complete. (Ground Floor) |
| 2 | First Floor |
| 3 | Dismantling brick or stone masonry in clay under 3M height including stacking the useful materials for re use and removing the debris within 50M lead as per direction of Engineer-in-charge. |
| 4 | Dismantling and removing old tile cladding from walls including racking out joints 12mm deep including stacking the useful materials for re use and removing the debris away from the work site as directed by Engineer-in-charge. (Ground Floor) |
| 5 | First Floor |
| 6 | Dismantling and removing doors, windows and ventilators including removal of frames, hinges, fastenings and stacking the same for reuse and removing the debris within 50M lead as directed by Engineer-in-charge. (Ground Floor) |
| 7 | First Floor |
| 8 | Earth work in excavation of foundation trenches in hard soil including dressing and leveling the bed and depositing the soil within 50M initial lead and 1.5M initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3M in depth and as per the direction of the EIC. |
| 9 | Supplying, filling in foundation and plinth with sand well watered and rammed in 22.5 cm (9”) thick layers including watering and ramming with cost, conveyance, royalties and taxes of sand with labour and T&P required for the work etc. complete (Measurement will be taken on finished compacted section only). |
| 10 | Cement concrete of proportion (1:3:6) in foundation using 4cm (1 ½”) size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6”) thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties & taxes of all materials with all labour, cess & T&P required for the work etc. complete in all respect. |
| 11 | Fly Ash brick masonry in cement mortar (1:6) in Foundation and plinthusing Fly Ash bricks of 25cmx12cmx8cm size having a crushing strength of not less than 75 kg/cm2 with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing including cost, conveyance, royalties and taxes of all materials with all labour and T&P required for the work complete in all respect in all floors |
| 12 | 12mm (½”) thick cement plaster (1:6) finished smooth to outside smooth surface of brick walls after raking out the joint including watering and curing with cost, conveyance, royalties and taxes of all materials with all labour and T&P required for the work etc. complete in all respect. (Ground Floor) |
| 13 | First Floor |
| 14 | 16mm (5/8”) thick cement plaster (1:6) finished smooth to inside roughsurface of9”/10” thick brick walls after raking out the joints including watering and curing with cost with cost, conveyance, royalties and taxes of all materials with all labour, T&P required for the work etc. complete. (Ground Floor) |
| 15 | First Floor |
| 16 | Supplying, fitting and Fixing Kota stoneof approveddimension 16mm to 25mm thick as directed by Engineer-in-charge in floor on 20mm thick cement plaster (1:4) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties and taxes of all materials complete in all respects. (Ground Floor) |
| 17 | First Floor |
| 18 | Supplying, fitting and Fixing kota stone using kota tile of minimum 16mm thick and dimensional area 0.10 sqm as directed by Engineer-in-charge in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties and taxes of all materials complete in all respects. (Ground Floor) |
| 19 | First Floor |
| 20 | Supplying, fitting and fixing vitrified industrial floor tile of premimum grade having thickness 8mm to 10 mm in floors of size 300mm x 300mm coloured / printed series of approved make of premium grade having thickness 8mm to 10mm conforming to IS-4457 on 20mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties and taxes of all materials complete in all respects (Ground Floor) |
| 21 | Labour for refixing of kota stone using kota tile in dados of minimum 16mm thick and dimensional area 0.10 sqm as directed by Engineer-in-charge in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties and taxes of all materials complete in all respects.(Ground Floor) |
| 22 | First Floor |
| 23 | Labor for fitting and fixing of old doors & windows and T & P required for the work etc all complete. (Ground Floor) |
| 24 | First Floor |
| 25 | Painting two coats with any approved weather seal coat (I.S.I.) paint of approved quality shade and make over a coat of priming with water bound wall cement primer (I.S.I.) to wall surface including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect.(Ground Floor) |
| 26 | First Floor |
| 27 | Distempering two coats with Oil bound water distemper of approved shade, make and quality over a coat of cement primer including cost of distemper, primer and brush, conveyance, and taxes of all materials with labour with T&P required for the work etc. complete in all respect (Ground Floor) |
| 28 | First Floor |
| 29 | Manufacturing, supplying, fitting and fixingM.S. iron grill gate/ M.S. grills, grills made out of M.S.flat of 20mmx6mm &frame made out of 35mmx 35mm x6mm size M.S. angle iron of approved design as directed by Engineer-in-charge and placing in proper position including cost, conveyance, taxes with all labour and T&P required for the work etc. complete in all respect. A) Panel Room grill |
| 30 | (B)R.H.S corridor door |
| 31 | Supply Fitting fixing of 6mm thick Louvers glass for ventilators etc including cost conveyance and taxes of all materials with labour and T&P complete in all respect. |
| 32 | First Floor |
| 33 | Pressed steel double leaf door assembly comprising of 100mm x 48mm frame in 1.25mm CRCA Sheet having 80mm x 32mm stiles and rails with nosing 170mm x 32mm lock rail with noising flted/designed panel including cost of all and complete (Ground Floor) |
| 34 | First Floor |
| 35 | Painting two coats with any approved synthetic enamel paint of approved quality shade and make over a coat of priming to old/new wood work / iron work including cost of the primer and paint, sand papering polishing the surface with cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect. (Ground Floor) |
| 36 | First Floor |
| 37 | Letter writing two coats with any approved enamel paintincluding cost, conveyance, taxes with all labour and T&P required for the work etc. complete in all respect. |
| 38 | Providing fitting and fixing of Stainless steel of 304 grade in hand railing using 50 mm dia 2mm thick circular pipe with Balustrade of 32mm x 32 mm x 2mm @ 90 mtr C/C and stainless square pipe bracing of size 32mm x 32 mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etcincluding cost conveyacne royalties of all materials and cost of all labour T&P required for the work etc. complete as per direction of the Engineer-in-charge.(Ground Floor) |
| 39 | First Floor |
| 40 | Cement concrete (1:2:4) using 12mm size black hard crusher broken granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete in layers, watering, curing etc. complete including cost, conveyance, royalties and taxes of all materials with labour and T&P etc. required for the workcomplete (Ground Floor) |
| 41 | Supplying & applying of sikadur combiplex SG (200x2mm) of sika product for joint & crack of expansion joints with sikadur-31C epoxy adhesive & Aluminum sheeting on top, over a cleaned, free from oil, grease surface including cost, conveyance, royalties & taxes of all materials with all labour, cess & T&P required for the work etc. complete in all respect. |
| 42 | Providingwax polishing to Kota stone flooring of havingdimensional area above 0.10 sqm of16mm to 25mm thick as directed by Engineer-in-charge in floors, treads of steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties and taxes of all materials complete in all respects.(Ground Floor) |
| 43 | First Floor |
| 44 | Removing, Carriage of excavated earth & debris etc. by mechanical means & disposing of 5 Km away from the work site as directed by Engineer-in-charge including loading and unloading etc complete in all respect. (Ground Floor) |
| 45 | First Floor |
| 46 | Providing fitting, fixing of partition walling OEL aluminum anodized section No.9210 and 9207 as single groove and double groove respectively as horizontal and vertical member and OEL section 4660 as tapered clip for fixing up jointing angle No.1855 etc including cost conveyance and taxes of all materials with labour and T&P complete in all respect.(first Floor) |
| 47 | Supplying, fitting, fixing 5mm black glass in fully glazed aluminum framed open able windows using 15 micron anodized OEL aluminum section 2082 as out section, 9139 as mullion section, 4124 as a shutter section frame with tapered clip of section 4125 aluminum angle, rubber beading, friction stay & handle etc. with including cost, conveyance, taxes of all materials complete in all respect as per direction of EIC. (First Floor) |
| 48 | E.I WorkRecessed wiring to light/Fan/Exhaust fan/ Call bell pointwith 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V modular type switch ISI marked and ceiling rose ISI marked mounted on MS box having FRLSHont bakelite cover of suitable size , MS box with 1 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge.(Make of wire Finolex/L&T/Havels/HPL/V Guard)(Modular).(a) Group-A |
| 49 | (b) Group-B |
| 50 | (c) Group-C |
| 51 | Recessed wiring to 5/6amp Plug pt. point on Existing boardwith 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having FRLSHont bakelite cover of suitable size , MS box with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Make of wire Finolex/L&T/Anchor/Havels/HPL/V GuardI) |
| 52 | S/F of 5A socket on existing Board |
| 53 | S/F of 15A socket on MS Board |
| 54 | S/F of call bell |
| 55 | Circuit Sub main with FRLSH wiring in PVC Conduit.(Make of wire Finolex/L&T/Anchor/Havels/HPL/V GuardI)(a)2 x 1.5 sq.mm + 1 x 1.5 sq.mm |
| 56 | (b)2 x 2.5 sq.mm + 1 x 1.5 sq.mm |
| 57 | (c)2 x 4 sq.mm + 1 x 1.5 sq.mm |
| 58 | (f) 4 x 10 sq.mm + 2 x 4sq.mm |
| 59 | S/F of B.K angle holder |
| 60 | S/F of 15w LED bulb (C.G/Havells/Philips) |
| 61 | S/F of 20w LED tube light (Phillips/C.G/havells) |
| 62 | S/F of 48\" ceiling fan (Bajaj, Usha striker, Havells) |
| 63 | S/F of electronic type fan reguletor(C.G/Havells/Philips) |
| 64 | S/F of standard GI Pipe earthing as per standard specification as per direction of engineer-in-charge. |
| 65 | S/F of computer board (3nos switch & socket) as per direction of engineer-in-charge. |
| 66 | S/F of 9\" exhaust fan(bajaj/havells/CG) |
| 67 | S/F of 90 watt LED street light with fixing with M.S angle clamping on wall/parapit (C.G/Havells/Philips) |
| 68 | S/F of surface squre type 15w led ceiling light (Philips/havells/C.G) |
| 69 | S/F of Main panel board (48\"x36\"x12)with 16swg CRCA sheet one coat red oxide & 2coat of gray enemeled paint dust proof with following arrangements I/C-125A 36ka 4p mccb-1no,cu.Busbar-200A, O/G-63A TPN mccb-1no,100A cu.busbar-1no,40A DP mcb-12nos. (Schneider/Ligrand/L&T) including indicating lamp(RYB)1set as per IE rules. |
| 70 | S/F of Main panel board (48\"x36\"x12)with 16swg CRCA sheet one coat red oxide & 2coat of gray enemeled paint dust proof with following arrangements I/C-36A 36ka 4p mccb-1no,cu.Busbar-100A, O/G-63A TPN mccb-1no,100A cu.busbar-1no,40A DP mcb-12nos. (Schneider/Ligrand/L&T) including indicating lamp(RYB)1set as per IE rules. |
| 71 | S/F of 4way single Door DB with( 6-32A sp mcb -4nos )HPL/L&T/Havels) as per direction of engineer-in-charge. |
| 72 | S/F of fire extinguisher of capacity 4kg |
| 73 | Supply of 35sqmm 3 1/2 core allm.armed cable (polycabe, Havells/v-guard) |
| 74 | S/F of cable terminatio |
| 75 | Laying of 25sqmm 3 1/2 pvc armored cable |
| 76 | S/F of portico light |
| 77 | P.H. WorkSupplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV (10 k.g. F/cm) on firming I.S.4985 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge.15mm dia PVC ASTM pipe (sch-80) (Ground Floor) |
| 78 | First Floor |
| 79 | 25mm dia PVC ASTM pipe (sch-80) (Ground Floor) |
| 80 | First Floor |
| 81 | 32mm dia PVC ASTM pipe (sch-80) |
| 82 | 40mm dia PVC ASTM pipe (sch-80) |
| 83 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materialsincluding cost & conveyance of all materials to worksite, payment oftaxes etc. allcomplete as per P.H specification and direction of the Engineer-in-charge.15mm dia CP angle stop cock (Plaza make) |
| 84 | 15mm dia CPtwo way bib cock (Plaza make) |
| 85 | 15mm dia CP short body bib cock (Plaza make) |
| 86 | 15mm dia CP long body bib cock (Plaza make) |
| 87 | 20mm dia CP concealed stop cock (Plaza make) |
| 88 | 25mm dia brassfull way valve (Shakti make) |
| 89 | 32mm dia brassfull way valve (Shakti make) |
| 90 | 40mm dia brassfull way valve (Shakti make) |
| 91 | 25mm dia CP Health Faucet (Plaza make) |
| 92 | Flush cock with wall flange (Plaza make) |
| 93 | 15mm CP Extension piece |
| 94 | 125mm CP grating |
| 95 | 15mm size C.P. flange |
| 96 | Supplying all materials , labour, T&P and fixing rotational mouldedpolyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr widthKBbrickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxesetc.all complete as per approved drawing , P.H. specification and direction ofEngineer-in-charge2000 liters capacityPVC water storage tank roof of 1st floor |
| 97 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damagesincluding watering ,curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.Ground Floor |
| 98 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer\"s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment oftaxes etc.all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B) |
| 99 | 110mm U-PVC‘P’ Trap(Ori Plast/Finolex/Supreme Make) |
| 100 | 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 101 | 110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make) |
| 102 | 110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make) |
| 103 | 110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 104 | 110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make) |
| 105 | 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 106 | 110mm U-PVC D/Jn door(Ori Plast/Finolex/Supreme Make) |
| 107 | 110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make) |
| 108 | 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 109 | Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI \"p\" or \"s\" trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.580mm size Orissa pan (Hindware/Parryware/Neycer make) |
| 110 | Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make ) |
| 111 | Supplying all materials,labour,T&P and fixing Flat back lipped wall (Mini stall urinal -630mmx180mm) urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge Half stall urinal |
| 112 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral \"p\" or \"s\" trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-chargeEuropean water closet with \"p\" trap plain(Hindware/Parryware/Neycer make) |
| 113 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered \"Hot\" and \"Cold\" with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with Pedestal |
| 114 | Counter Top Basin (560x455) (Perryware/Hindware/nycer Make) white with 15mm C.P. Pillar cock (jaquar/essco) |
| 115 | Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen/wall sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24” x 18” x 10” sink |
| 116 | Differently Abled series (2nos)Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered \"Hot\" and \"Cold\" with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge.550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with pedestal |
| 117 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.600mmx450mm size B.E mirror (swivelled type) |
| 118 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C pan) with integral ‘P’or ‘S’ trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge.SINGLE PIECE-WATER COLSET P TRAP - LYS-WHT-0204P |
| 119 | CP soap Dish holder (Jaquar make) CAN - MCH - 1131N |
| 120 | CP towel ring (Jaquar) CAN - ANQ - 1121 |
| 121 | Grab bar 692 mm long (WAC - SAP - BR 0600CS ) |
| 122 | Grab bar vertical Swing (WAC - SAP - BG 0800CS ) |
| 123 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge25mmx600mm long CP towel rail (Plaza make) |
| 124 | Towel ring (Plaza make) |
| 125 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.600mmx125mm plate glass shelf (Plaza make) |
| 126 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.Large Size mirror with Frame (16x0.90x0.90)= 12.96 |
| 127 | 600mmx450mm size B.E mirror (swivelled type) |
| 128 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in chargeCP soap holder (Plaza make) |
| 129 | Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge.½” x 5” CP Shower (Plaza make) |
| 130 | Supplying all materials , labour, T&P and cutting holes through existing brickor laterite masonry wall for takingU-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 131 | Supplying all materials ,labour ,T&P and constructing Inspection Chamber ofinside size 760mmx760mmx460mmwith cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips,12mm thick cement plaster (1:3)with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxesetc.all complete as perapproved drawing, P.H specification and direction of Engineer-in-charge.Inside size 76cmx76cmx46cm with 18” dia RCC MH cover |
| 132 | Supplying all materials ,labour ,T&P and constructing gully trap chamber ofinside size 250mmx250mmwith 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinthand inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI gratingetc.all complete as per drawing,specification and direction of Engineer-in-charge |
| 133 | Supplying all materials labour T&P filling sand in lavatories well watered and rammed including lead of materials to work site. |
| 134 | Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 135 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-chargeGround Floor |
| 136 | First Floor |
| 137 | Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 40cmx40cm special printed seriesto be pre-approved by the Engineer-in-charge )Ceramic tile 30cmx30cm Ground Floor |
| 138 | First Floor |
| 139 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. (Ground Floor) |
| 140 | First Floor |
| 141 | Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirtingon 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 25cmx33cm special plain / printed series to be pre-approved by the Engineer-in-charge ) Glazed tile 30cmx20cm Ground Floor |
| 142 | First Floor |
| 143 | Granite Tiles 20mm Thick (Ground Floor) |
| 144 | First Floor |
| 145 | Factory made single leaf rigid FRP(alternately called GRP) sanwhch composite door shutter of 32mm thick laminated ith two GRP skins with wood grain finish fabricated using UV-stabilised Isothealica Gelcoat and one layer of 450 gsm E-glass chopped starand mat (CSM) impregnated with orthopthalic palyester resin. The thikness of the skins shall not be less that 1.50mm expanded polyestyrone(EPS) stuctural foam panel of 29 mm thickness and a density of 20Kg/cu.mtr shall be used as core material .Wooden reinforcements made of seasoned sal wood reinforements for fitting the metal fittings such as tower bolts ,aldrops,handles etc. shall be provided .A Strictira; adehsive compatible with(EPS) foam shall be used for bending the core material,the sal wood reiforcements and the skins.The materials and process for manufacturing the door shutters shall conform to RC-TIFAC composites Design centre\"s standars and specifications and the door shutters tested in conformation to IS:40250-1998.The finish of door shutter will be plain colour white/Lvory/beige/Light grey/Mahogany/Teak wood of any other colour using high quality pigments .Three heavy whight mild steel butt hinges typpe-I(ISI-marked) size 100 mm are to be fitted on one side of shutter. |
| 146 | Factory made FRP (alternately called GRP) door frame of sixe75mmX100 mm fabricated using E-Glass chopped strand Mat(CSM) U.V stabilised inopthalic Gelcoat and impregnated with inopthalic resin.The thickness of the GRP sikns shall no be less that 2.00 mm .The door frame consist of foru segments which are provided with plug-in-socket arrangement in-sitein the ,ould .The segments are plugged in and are joined together by means of screw . The GRP frame shall be provided with wooedn rainforcement of six locations for high screw holding capacity for fixing metallic hold fast and shall be consolidated by filling with medium destity foam/Plaster of paris with fibre reinforcement,Six numbers of 260mm X 25mm X 5 mm size \"S\"shaped M.S flat hold fast shall be provided with the frame .The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design centre\"s stanards and specifications.The finish of door rrame will be plain colour white/Lvory/Beige/Light grey Golden brown Mahogany/Teak wood sand stone/Champagne /Pastel blue or any other colour using high quality pigments cimplete in all respect as per specification and direction of the Engineer in Charge. |
| 147 | Supplying all materials labor T&P and fitting & fixing 40mm to50mm thick marble partition wall or screen wallincluding cutting grooves and mending good the damages with cement concrete (1:2:4) using 12mm size hard granite chipsincludingwatering, curing, conveyance of all materials to worksite, payment of royality, taxes etc all complate as per specification and direction of the Engineer in charge |
| 148 | Fitting & fixing of Aquagurad Cooler Cum Purifier for drinking water privision.Cost of Aquaguard Cooler - Cum Purifier 2nosCost of Aquaguard Cooler - Cum Purifier |
| 149 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV (10 k.g. F/cm) on firming I.S.4985 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge.20mm dia PVC ASTM pipe (sch-80) |
| 150 | Supplying all materials, labor, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge.15mm dia CP angle stop cock (Jaquar)CON-CHR-059KN |
| 151 | Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture\"s specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge.100mm dia P.V.C. pipe |
| 152 | 150mm dia P.V.C. pipe |
| 153 | Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification. MH size 0.91m x 0.91 m with 0.45 m (18” dia RCC Cover ) |
AI Tender Summary
Tender Timeline
Jun 24, 2022
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 06, 2022
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedJul 06, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 07, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender