Renovation Work Of 1 No. Of D Type, 2 No. Of C Type, 2 No. Of B Type And 1 No. Of H Type Quarters At Iocl Residential Colony, Sanganer, Jaipur
Tender Value
Ref. Documents
Estimated cost
Bid Submission
13 Jul 2022
0 days left
EMD
76700
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sanganer → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation Work Of 1 No. Of D Type, 2 No. Of C Type, 2 No. Of B Type And 1 No. Of H Type Quarters At Iocl Residential Colony, Sanganer, Jaipur
BOQ
| Sl. No. | Item Description |
| 1 | Renovation work of 1 no. of D type, 2 no. of C type, 2 no. of B type and 1 no. of H type Quarters at IOCL Residential Colony, Sanganer, Jaipur |
| 2 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sq.m. including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm(Make :Johnson or Equivalent)(Spacer to be used as per EIC Direction) |
| 3 | Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3 Kg/sq.m. |
| 4 | Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS:15477, in average 3 mm thickness.(Make :Saint Gobin weberset nova or equivalent) |
| 5 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to IS:15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sq.m. including grouting the joint with white cement & matching pigments etc. complete.. Size of Tile 600x600 mm(Make :Johnson or Equivalent) |
| 6 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of first quality conforming to IS:15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 Kg/ sq.m. including grouting the joints with white cement and matching pigments etc., complete.(Make :Johnson or Equivalent) |
| 7 | Providing and fixing first quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by the Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 Kg/sq.m., including pointing in white cement mixed with pigment of matching shade complete.(Make :Size 600*300 Johnson or Equivalent)(Spacer to be used as per EIC Direction) |
| 8 | Granite Work |
| 9 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade |
| 10 | Area of slab upto 0.50 sqm |
| 11 | Area of slab over 0.50 sqm |
| 12 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. |
| 13 | Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : |
| 14 | Dismantling |
| 15 | Dismantling terrazo ,tiles, marble or any other polished stone flooring and upto 15 mm base of cement mortar on walls, dados etc. in all type of floors including stacking of serviceable material and disposal of unserviceable materials within 0.5 Km lead as directed. |
| 16 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 17 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: Of area 3 sq. metres and below |
| 18 | Wooden Work & its Hardware Fitting |
| 19 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs ordash fastener shall be paid for separately). Second class teak wood |
| 20 | Providing and fixing ISI marked flush door shutters conforming to IS:2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters :(Make :Century/Greenply or Equivalent) |
| 21 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 22 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality 1 mm thick (Make :Century/Greenply or Equivalent) |
| 23 | Providing and fixing 35 mm thick wire mesh door shutter for entrance doors made of styles and rails of 35 mm thick 2nd class teak wood, galvanised M.S. wire mesh (gauze) of average width of aperture 1.18 mm with wire of dia 0.56 mm including necessary fittings such as heavy type oxidised brass butt hinges with necessary brass screws, anti-termite, wood borer treatment, painting/ polishing to required shade etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. |
| 24 | Providing and fixing magic eye piece in front door with necessary screws etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles, etc. as per drawings, specifications and directions of the Engineer-in-Charge. |
| 25 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :250x16 mm |
| 26 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm |
| 27 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250x10 mmmm |
| 28 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper |
| 29 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm |
| 30 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. |
| 31 | Providing and fixing readymade stainless steel (304 Grade) Modular Kitchen Basket and accessories such as right angle basket (Plain Cup & Saucer, Plant, Partition, Bottle Rack, Thali, Cutlery), Kitchen Utensil Basket, Dinner Set Basket, Kitchen Grain Basket, Multipurpose Basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts & bolts, stainless steel screws and telescopic channel, etc. as per direction of the Engineer-in-Charge. [Notes: (1) For payment purpose, only weight of stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners, Telescopic Channels, etc. (2) Payment for providing & fixing telescopic channel shall me made separately under relevant item of SOR(Make :Evershine/godrej/kaff or Equivalent) |
| 32 | Providing and fixing stainless steel heavy type telescopic drawer channels of approved make, 20 inch long with screws etc. complete as per direction of the Engineer-in-Charge.(Make :Hettich/godrej/kaff /ozone or Equivalent) |
| 33 | Providing and fixing 5mm thick mirror of superior glass (of approved quality) and of required shape and size with smooth bevelled edges from all sides, including necesaary fittings all complete. As per direction of EIC.Rectangular shape Rectangular shape (Make :Saint Gobin/ASI or Equivalent) |
| 34 | Providing and fixing SS curtain rods with two SS brackets fixed with SS screws and SS plugs, etc., wherever necessary complete : 20 mm dia |
| 35 | Supply & installation of anti-bird nets in the balconies of the Sanganer colony including supply & fixing of MS angles in RCC roof/wall of size25X25X3 mm at two ends, support strip, fasteners, nut-bolts, labourcharges etc complete as per directions of Engineer-in-charge. The free ends of net will be covered by PVC patti with screws of appropriate size as decided by EIC. |
| 36 | Providing and fixing in position loft shutters with 19 mm thick pre-laminated block board of BWP Grade, Decorative Type (BWP-DEC) of approved quality or equivalent stamped with IS-1659:2004 (Latest Edition) and pre-lamination should conform to IS-2046:1995 (Latest Edition) and 3 mm thick teak wood lipping at all edges of the board with polish/ enamel paint fixed with water resistant adhesive on inside and external face as per approved shade including piano type hinges 19x25 mm, best quality teak wood lipping around the shutter edges, magnetic ball catchers, brass tower bolt, knobs, handles with S.S. roses 150mm x 19mm diameter (Ref. Make - DORSET, Model - IP 06 PR SS or approved equivalent) etc. and frame size 50x35 mm in 2nd class teak wood complete including spirit polishing/ enamel painted on lipping in required shade matching to the laminate, fixing of frame to wall with hold fasts, 1:2:4 RCC etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. (Measurement of cupboard shall be taken as front area of shutters only): For shutters.(Make :Century/Greenply or Equivalent) |
| 37 | Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screwsetc. complete. Size of lock 40mm |
| 38 | Supplying, fabricating and fixing M.S. structural steel work made of joists, tubes, pipes, channels, angles, plates, flats, bars etc., for struts, chain link fencing posts as per drawing includinggate, ladders, safety grills, walkways, collapsible gate, signboards, supports for cable trench, making slots for barbed line, wire hoisting, placing in position, embedding in concrete, applying two coats of epoxy paint \"EPILUX 155\" High Build Enamel over a coat ofEPILUX 610 Primer of M/s Berger or any other approved equivalent make as permanufacturer’s recommendation, complete in all respect including cutting to required size welding of joints, fixing anchor plates,bolts, theading, nuts, washers, sleeves etc. and necessary lettering of approved pattern on main gate, signboards etc.complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of Site Engineer. (excluding the cost of concrete work). |
| 39 | Providing and fixing magnetic catcher of approved quality in cupboard/ wardrobe shutters, including fixing with necessary screws etc. complete : Double strip (horizontal type) |
| 40 | Providing and fixingHeavy Stainless Steel cup board or wardrobe knob of approved quality with necessary screws. |
| 41 | Aluminium Works |
| 42 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of the Engineer-in-Charge. [Note: Glazing, paneling and dash fasteners to be paid for separately] : |
| 43 | For fixed portion: Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 44 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provisionfor fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately): Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 45 | Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and directions of the Engineer-in-Charge complete :Up to 5 mm depth and 5 mm width |
| 46 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-Charge. [Note: Cost of aluminium snap beading shall be paid in basic item] |
| 47 | With float glass panes of 4.0 mm thickness |
| 48 | With float glass panes of 5.50 mm thickness |
| 49 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4 mm wide aperture |
| 50 | MODULAR KITHEN |
| 51 | MODULAR KITCHEN CABINET ABOVE PLATFORM IN KITCHENProviding and fixing in position built-up cupboard, internal framework, shelves, drawers, layon slides partitions and shutters 19 mm thick pre-laminated block boardof BWP Grade, Decorative Type (BWP-DEC) of approved quality or equivalent stamped with IS-1659:2004 (Latest Edition) and and pre-lamination should conform to IS-2046:1995 (Latest Edition) and 3 mm thick teak wood lipping at all edges of the board with polish/ enamel paint fixed with water resistant adhesive on inside and external face as per approved shade including piano type hinges 19x25 mm, best quality teak wood lipping around the shutter edges, magnetic ball catchers, brass tower bolt, knobs, handles with S.S. roses 150mm x 19mm diameter (Ref. Make - DORSET, Model - IP 06 PR SS or approved equivalent) complete including spirit polishing/ enamel painted on lipping in required shade matching to the laminate etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. (Measurement of cupboard shall be taken as front area of shutters only): For kitchen wall cabinets.(Make :Century/Greenply or Equivalent) |
| 52 | MODULAR KITHEN CABINET BELOW PLATFORM Providing and fixing in position built-up cupboard, shutters with 19 mm thick pre-laminated block board of BWP Grade, Decorative Type (BWP-DEC) of approved quality or equivalent stamped with IS-1659:2004 (Latest Edition) and pre-lamination should conform to IS-2046:1995 (Latest Edition) and 3 mm thick teak wood lipping at all edges of the board with polish/ enamel paint fixed with water resistant adhesive on inside and external face as per approved shade including piano type hinges 19x25mm, magnetic ball catchers, brass tower bolt, knobs, handles with S.S. roses 150mm x 19mm diameter (Ref. Make - DORSET, Model - IP 06 PR SS or approved equivalent) and frame size 50x35 mm in 2nd class teak wood as per drawing complete including spirit polishing/ enamel painted on frame & lipping in required shade matching to the laminate, fixing of frame to wall with hold fasts, 1:2:4 RCC etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. (Measurement of cupboard shall be taken as front area of shutters only): For kitchen under slab cabinets.(Make :Century/Greenply or Equivalent) |
| 53 | Plumbing & Sanitary Fitting |
| 54 | Supplying and fixingbest quality Astral or equivalent PVC floor trap (NAHAHI TRAP) of 100m inlet and 75mm outlet of self cleansing design with screwed down or hinged OVC grating with or without vent arm as per the manufacturer\"s design etc. complete including cost of cutting making good wall and floor surface. |
| 55 | Providing and fixing approved quality chromium plated nahni trap jali of size150 mm x 150 mm complete as directed. |
| 56 | Providing and fixing white wall mounted European type Water Closet (EWC)of size 655 x 365 x 755 mm with softclose set cover (PP) of CERA make (Ref. CERA.-S1060103 Cistern B1520106 Soft Close Seat Cover B1810106 Twin Flush Fittings) with twin flush slim concealed cistern body of CERA make or equivalent approved make, of approved shade including matching shade of plastic seat and lid cover, Stand for WC,fittings, connectors, necessary hanging arrangement, rubber buffers etc. including cutting and making good the wall and floors wherever required, making connections to soil / vent pipe etc., complete in all respects inclusive of cost of all required fittings, fixtures, materials, labour, tools, tackles etc. as per specifications and direction of Engineer-in-Charge. |
| 57 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron \"P\" or \"S\" trap, 10 litre low level white P.V.C. dual flushing cistern (Ref. Make: HINDWARE, Model: Cat No.-21029 or equivalent approved), including flush pipe, with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : White vitreous china orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (Ref. Make: HINDWARE, Model: Cat No.-20042 or equivalent approved). |
| 58 | Providing and fixing Chromium plated two way bib cock of approved quality Jaquar(Ref: FUS-CHR-29041 Fusion or Equivalent) or approved equivalent conforming to IS standards: 15 mm nominal bore |
| 59 | Providing & fixing health faucet (Ref. Jaquar Cat. No. 563 or approved equivalent) with flexible tube 8mm dia 1.5 m long (Ref.Jaquar Cat. No. 549 or approved equivalent) with support stand completeas per direction of EIC. |
| 60 | Providing and fixing 15mm diameter C.P. brass tap as per following with C.P. brass flange including cutting & making good the walls wherever required, etc. complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge. : Bib Cock (Ref. Make: JAQUAR, Model: Cat. No. 0107 or approved equivelent) |
| 61 | Providing and fixing 15mm diameter C.P. brass angle valve as per following with C.P. copper connecting pipe 375mm long or as required including nuts, washers, C.P. brass flange, etc. including cutting & making good the walls wherever required, etc. complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge. Angle Valve (Ref. Make: JAQUAR, Model: Cat. No. 7053 or approved equivalent) |
| 62 | Providing and fixing 15mm diameter C.P. brass stop cock with wall flange (Ref. Make: JAQUAR, Model: Cat. No. 0933 or approved equivalent), male end with C.P. copper connecting pipe 375mm long or as required including nuts, washers, C.P. brass flange etc. including cutting & making good the walls wherever required complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge. |
| 63 | Providing and fixing C.P. brass Towel Ring 300mm diameter, fixed to P.V.C. cleats with C.P. brass screws, etc. complete. |
| 64 | Providing and fixing approved quality C.P. brass Towel Rail of 20mm diameter & 600mm long including C.P. brass brackets fixed with wooden cleats and C.P. brass screws etc. complete. |
| 65 | Supplying and fixing of following PVC pipes (15 Kg/cm2, 6 Kg/cm2) including all PVC bends,elbows special arangements,tee, including MS clamps, brackets etc. complete as per IS 4985 |
| 66 | 40 mm (10 kgf/cm2) |
| 67 | 90 mm ( 6 kgf/cm2) |
| 68 | 110mm ( 6 kgf/cm2) |
| 69 | External Work: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per directions of the Engineer-in-Charge : |
| 70 | 40 mm nominal outer dia Pipes |
| 71 | 50 mm nominal outer dia Pipes |
| 72 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. |
| 73 | 20 mm nominal outer dia Pipes |
| 74 | 25 mm nominal outer dia Pipes |
| 75 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible Pipe : 32 mm dia |
| 76 | Providing and fixing glazed vitreous table top wash basin of 410X410X155 mm size of Jaguar make (Ref. Jaguar Cat No. - CNS-WHT-905) or equivalent approved make with MS or CI brackets painted white, C.P. brass chain with rubber plug, 32 mm size full thread with 80mm height waste coupling of Jaguar make (Ref. Jaguar Cat. No. ALD-705) or equivalent, 32 mm size with 300mm & 190mm Long wall connection pipes & wall flanges bottle trap of Jaguar make (Ref. Cat. No. ALD-769L300x190) or equivalent and union, 32 mm dia C.P. pipes to wall flange etc. including cutting and making good the walls & floors where required complete in all respects inclusive of cost of all required fittings, fixtures, materials, labour, tools, tackles etc. as per specifications and direction of EIC. |
| 77 | Providing and fixing White Vitreous China Wash basin size 550x400x140 (Ref: Cat no. S2020137) mm with C.P. brass Single Lever Extended Basin Mixer of approved quality Jaquar ref (PRODUCT CODE: FUS-CHR-29023B)or approved equivalent conforming to IS standards: 15 mm nominal bore C.I. brackets, coupling(Waste Coupling 32mm Size Half Thread with 130mm height ref ALD-CHR-709L130) of approved quality and make, including painting of fittings and brackets,wall flanges, bottle trap of Jaguar make (Ref. Cat. No. ALD-769L300x190) or equivalent and union, 32 mm dia C.P. pipes to wall flange etc. including cutting and making good the walls & floors where required complete in all respects inclusive of cost of all required fittings, fixtures, materials, labour, tools, tackles etc. as per specifications and direction of EIC. |
| 78 | Kitchen sink without drain board: 610x510 mm bowl depth 200 mm |
| 79 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 80 | 40 mm nominal bore |
| 81 | 50 mm nominal bore |
| 82 | Providing and fixing 15mm diameter C.P. brass shower mixer (Ref. Make: JAQUAR, Model: Cat. No. 7273 or approved equivalent) and shower (Ref. Make: JAQUAR, Model: Cat. No. 7489N or approved equivalent) including cutting & making good the walls wherever required, etc. complete in all respects inclusive of cost of all materials, labour, tools, tackles etc., as per specifications and directions of the Engineer-in-Charge. |
| 83 | Providing and fixing C.P. brass Single Lever Extended Basin Mixer with Extension Body of approved quality Jaquar ref (PRODUCT CODE: FUS-CHR-29023B)or approved equivalent conforming to IS standards: 15 mm nominal bore |
| 84 | Painting & Finshing |
| 85 | 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) |
| 86 | CEMENT PLASTER (IN FINE SAND).12 mm cement plaster of mix : 1:6 (1 cement : 6 fine sand) |
| 87 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 88 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content :. With water thinnable cement primer on wall surfacehaving VOC content less than 50 grams/litre |
| 89 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats(Make Asian Apocolite or Equivalent) |
| 90 | Polishing the wooden surface with three coats of polish as per specifications including applying sand paper (2 & 3 Nos.) filling the holes and scratches with the putty before applying polishing coaton wood and wood based surfaces to give an even surface of ASIAN paints or other equivalent approved make including cleaning the surface of all dirt,dust and sand papered smooth and including a coat of wood fillers including the cost of all labour and materials complete in all respect. Laquer polish |
| 91 | Painting with synthetic enamel paint of approved brand andmanufacture to give an even shade : Two or more coats on new work |
| 92 | Providing and fixing White Vitreous China Wash basin size 550x400x140 (Ref: Cat no. S2020137) mm with C.P. brass single lever Pillar Cock of approved quality Jaquar ref (PRODUCT CODE: FUS-CHR-29001)or approved equivalent conforming to IS standards: 15 mm nominal bore C.I. brackets, coupling(Waste Coupling 32mm Size Half Thread with 130mm height ref ALD-CHR-709L130) of approved quality and make, including painting of fittings and brackets,wall flanges, bottle trap of Jaguar make (Ref. Cat. No. ALD-769L300x190) or equivalent and union, 32 mm dia C.P. pipes to wall flange etc. including cutting and making good the walls & floors where required complete in all respects inclusive of cost of all required fittings, fixtures, materials, labour, tools, tackles etc. as per specifications and direction of EIC. |
| 93 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a)First layer of slurry of cement @ 0.488 Kg/sqm mixed with water proofing cement compound @ 0.253 Kg/sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 Kg/sqm mixed with water proofing cement compound @ 0.126 Kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 94 | Civil & Dismantling Works |
| 95 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of the Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations. (3) Cutting of all reinforcement shall be done using hack saw or chiesel or any other method as approved by the Engineer-in-Charge.] |
| 96 | Demolishing brick work in cement mortar manually or by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations] |
| 97 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of the Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations.] : Nominal concrete 1:4:8 or leaner mix (including equivalent design mix) |
| 98 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 99 | Labour charge for carefully taking out wash basin,urinal,WC pan etc.& disposing same as directed by Engineer-In-Charge. |
| 100 | Dismantling G.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore |
| 101 | Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per the directions of Engineer-in-Charge : Up to 150 mm diameter |
| 102 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing :1:1.5:3 [1 cement : 1.5 coarse sand (Zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources] |
| 103 | Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in superstructure above plinth level up to floor V level inall shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 104 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing : |
| 105 | 1:3:6 [1 cement : 3 coarse sand (Zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources] |
| 106 | Dismantling aluminium/ gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by the Engineer-in-Charge. |
| 107 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 108 | Core cutting in Brick masonary wall up to 125mm ( 5 inch) dia. with suitable core cutter for installation of UPVC pipe upto 125 mm dia includingsupply of all equipment, labour, materials etc. as per the directions of Engineer-in-Charge. [Note: This item shall be operated only on specific instructions from the Engineer-in-Charge] : |
| 109 | Electrical Works |
| 110 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. |
| 111 | 1 or 2 Module (75 mmX75 mm) |
| 112 | 3 Module (100 mmX75 mm) |
| 113 | 4 Module (125 mmX75 mm) |
| 114 | 6 Module (200 mmX75 mm) |
| 115 | 8 Module (125 mmX125 mm) |
| 116 | 12 Module (200mmX150mm) |
| 117 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.(Make Havells Crabtree Athena or Equivalent) |
| 118 | 5/6 A switch |
| 119 | 15/16 A switch |
| 120 | 3 pin 5/6 A socket outlet |
| 121 | 6 pin 15/16 A socket outlet |
| 122 | Telephone socket outlet |
| 123 | TV antenna socket outlet |
| 124 | Bell Push |
| 125 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 126 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. |
| 127 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 128 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 129 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 130 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 131 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.(Make Havells Crabtree Athena or Equivalent) |
| 132 | Supply, Installation, testing and commissioning of the followingluminaires, fixtures and fittings. The fixtures shall be installed onwall, ceiling etc. and as per the manufacturer instructions. The jobalso includes the connection of the fixture with outlet point using3core flexible wire wherever the lighting fixtures are there etc.complete as per detailed dawing and instruction of Architect/EIC. : 12\" exhaust fan of Philips or equivalent make with screw etc.complete as per detailed dawing and instruction of Architect/EIC. |
| 133 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Make Havells Crabtreeor Equivalent)Single pole |
AI Tender Summary
Tender Timeline
Jun 22, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJul 13, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 14, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender