Public Works Department-PWD has published Electrification Of Sports Hostel Facility , Leh. Submission Date for this Tender is 28-06-2022. Electrification Work Tenders in Leh Jammu And Kashmir. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVCconduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
2 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
3 | Wiring for circuit/ submain wiring alongwith earth wire with thefollowing sizes of FRLS PVC insulated copper conductor, singlecore cable in surface/ recessed medium class PVC conduit asrequired. A ) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
4 | b )2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
5 | c ) 4 x 6 sq. mm + 1X 6 sq. mm earth wire |
6 | d)4 X 16 sq. mm + 2 X 6 sq. mm earth wire |
7 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.1x 1.5 sq.mm |
8 | 2x1.5sq.mm |
9 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excludin modular plate etc. as required.a)5/6 A switch |
10 | 3 pin 5/6 A socket outlet |
11 | Bellpush |
12 | TV Antenna socket outlet |
13 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction boxwooden block including connections etc. as required |
14 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
15 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 No.s 3 pin 5/6 A modular socket outlet and 2 No.s5/6 A modular switch, connections etc. as required. |
16 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
17 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)a ) 6 way (4 + 18), Double door |
18 | b) a ) 8 way (4 + 24), Double door |
19 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. A )Single pole 6 /16 amp |
20 | Triplepole andneutral |
21 | Supply, installation , testing & commissioning of GI Electrode Earthing with 84mm dia and 3 meter length , with 3mm thick the electrode should be hot dip galvinised . The GI Electrode shall be pre filled with cristaline Conductive Material ( CCM ) . The GI electrode shall be surrounded with BEE MOIST compound to provide maximum contact between the electrode and compound should be eco - friendly GI Electrode Earthing should be eco - friendly GI Electorde Earthing should be maintinance free and does not require regular manual addition of water . The earthing pit should be covered with PVC cover |
22 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at |
23 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
24 | Supplying and fixing following rating and breaking capacity and pole MCCB with thermagmetic release and terminal spreaders in existing cubical panel board including drilling holes in cubical panel making connections etc as requiredMCCB FP 400 Amp 50 KA |
25 | On load Change over switch 200 Amp |
26 | Fabrication, supplying , installation testing and commissioning of following pannel made out of 2mm thick M.S sheet , floor mounted , vermin & dust proof, indoor , duly painted with provsion for fixing of1 nos incomer MCCB, , MCCB type change over switch - 1 No including supply and fixing 2 set of Aluminium bus bar and strip for housing MCB,s 56 Nos , MF Digital Meter and other allied accessories as required ( Make as per annexure) |
27 | Supplying and fixing of following rating 240 /415 Volt" C" series miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connection , testing and commissioning.( Above to32 Amp)TPN 40 Amp |
28 | TPN 63 Amp |
29 | Supplying and fixing of 1.1 KV PVC insulated and PVC sheathed XLPEat power cable of following sizes on surface / surface cables tray , 0.50 mtr below ground level etc. as required including carriage upto site of work ( Make as per annexure enclosed)150 Sqmm 3.5 core Armoured |
30 | Supplying and fixing of 120 watt LED Street Light complete with GI pipe bracket duly embeded along the parapet /wall.Wipro LR02-132-XXX-57-G2 or equivalent approved make |
31 | Supplying & fixing following luminaries as requiredLL20-111-XXX-65NE3wipro 10 watt LED tube light fitting. equivalent make and model Philips/Crompton Greaves. |
32 | 20 watt LED tube light fitting. LL20-221-XXX-65NE3 of wipro or equivalent make and model Philips/Crompton Greaves. |
33 | Supplying, installation testing and commissioning of LED 2"x2" recess mounted fixture that deliversatleast3000 lumens and wattage not more than 36 watt. The luminaries shall have a CRC a power coated body and a high efficiency diffuser. WIPRO CRCO10 RO 38HP57GL OR equivalent approved make. |
34 | Supplying and fixing of following electrical items suitable for operating on 240 /230 volts AC, 50 HZ supply , including connection etc. as required.Exhaust fan 300 mm size ( Heavy duty) CG transair or equivalent approved make |
35 | 250 mm Shutter Type |
36 | Supply and fixing LED type down lighter 12 watt |
37 | Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail