|
| 1 | Excavation in trenches n. exc 1.5 M in depth for foundation etc and getting out in hard / dense soil. |
| 2 | Surface excavation in hard dense soil n.exc (not exceeding) 30cm deep and averaging 15 deep and getting out in Hard / dense soil. |
| 3 | M & L for PCC Type D2 1:4:8 (40 mm graded aggregate) Cement concrete in foundations, filling, concrete bed to drain pipes and mass-concrete |
| 4 | M&L Brick work with sub class ‘B’ bricks curved on plan exc 6 M mean radius built in cement mortar 1:6 |
| 5 | M&L Brick work with sub class ‘B’ bricks curved on plan exc 6 M mean radius built in cement mortar 1:4 |
| 6 | M&L Brick work with sub class ‘B’ bricks curved on plan exc 6 M mean radius built in cement mortar 1:4 in half brick thick walls |
| 7 | Returning filling including spreading,levelling watering and well ramming in layers not exc 25 Cm thick complete |
| 8 | Removal of excavated soil exe 250m but not exe 500 m and deposited where directed. |
| 9 | M & L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; verticle or to batter fair finish surface. |
| 10 | M & L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions fair finish surface |
| 11 | M & L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc fair finish surface |
| 12 | M&L for Form work to soffits of suspended slabs such as roof slabs,floor slabs,landings and similar work, not exc 200mm thick (Horizontal or sloping) |
| 13 | M & L Formwork to chullah hoods, chajjas, troughs and similar items including edges fair finish |
| 14 | Form work to edges of concrete slabs exc 10 cm but not exc 20 cm thick |
| 15 | M&L TMT bars 10mm dia & over cut to length bent to shape required including cranking, bending spirally for hooping for columns hookingends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed. |
| 16 | All as per srl item No 1.14 here-in-before but6mm to 8mm dia and stirrups complete all as specified and directed. |
| 17 | M&L for RCC M30 in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concreteall as specified and as directed. |
| 18 | M&L forRCC M30 in Columns, pillars, piers, posts and struts complete all as specified. |
| 19 | M & L for RCC M30 in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified. |
| 20 | M & L for RCC M30 in slab supported on walls, beams, and column in floors, roofs, landings, balconies,canopies, deck slabs and inshelves,chajja complete all as specified. |
| 21 | M & L for Rendering 15mm thick cement mortar in two layers i.e 10mm in CM 1:6 and5mm in CM 1:4 mixed with with approved water proofingcompound as per manufacturer instruction on fair faces of brick work or concrete surfaces.Note: WPC measured and paid separtely. |
| 22 | M&L Rendering 10mm thick cement plaster on ceiling surfaces in cement mortar 1:4 finished fair and evenwithout using extra cement complete all as specified |
| 23 | M&L Rendering 12mm thickin cement mortar (1:6) on any face of Brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified. |
| 24 | M&L Non Skid Glazed ceramic coloured (light colour as approved) tilesof size 300x300x7-8 mm thick as in flooring set and jointed in neat cement slurry over & including 15 mm thick screed in cement mortar (1:6) as in floors/ sub floors and pointed in white cement with pigment to match the colour of tiles complete all as specified. |
| 25 | M&L Glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 1:4 CM 10mm thick rendering rough finishedto recive tiles as in skirting/Dado. |
| 26 | M&L Granite galaxy 20mm thick factory polished fixedwithcement slurrypointing with coloured pigment to match the granite including cutting to shape,grinding,polishing bulnosing etc in floors with 15mm thick screed bed in cement mortar (1:6) all as specified anddirected by the Engineer-in-Charge. |
| 27 | M & L 75mm thick PCCD2, 1:4:8 (40mm graded aggregate) in subbase offlooring complete all as specified. |
| 28 | M &L for broken stone Hardcore of gauge n exc. 63mm, broken stone or boulders deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified. |
| 29 | M&L for Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection, 50 mm thick, surfaces finished even and fair without using extra cement as in plinth protection including provision of construction joints complete all as directed by Engr-in-Charge and complete all as specified. |
| 30 | M&L Rendering 15 mm thick screed/ cement plaster in CM 1:3 with WPC on RCC surfaces of roof/Brick walls finished fair and even while the concrete is green. Note : WPC shall be measured and paid seperately. |
| 31 | Supply only integral water proofing compound. |
| 32 | M&L for APP based polymeric membrane minimum weighing 3.5 Kg/Sqm and minimum 3mm thick reinfored with polyster non wooven fabric ( wt not less than 160gm/sqm ) laid over primed surfaces includingbituminous primer conforming to IS-3384applied @ 0.3 Ltr/Sqm byby forced all as specified and directed.Four course roof treatment consist of as under:-(i) Applying one coat of bituminous primer conforming to IS-3384 @ 0.3 Ltr/ Sqm.(ii) Laying of APP based membrane as specified thickness and weight.(iii) Applying one coatbitumen grade 85/[email protected]/sqm.(iv) Applying two coataluminium paint @100ml/Sqm. |
| 33 | S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheetreinforced with MS square tubes S&F opening as per specification & drawings complete all as specified. |
| 34 | S&F Factory made soild PVC Moulded Door shutter 28 to 30mm thick(stiled) with 2,4,or 6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face with particle board core. |
| 35 | S&F 125mm long PTMT Butt hinges fixed with necessary screws powder coated any colour complete all as specified and directed. |
| 36 | S&F 150mm long PTMT handles powder coated any colour oval type complete all as specified coloured 125 mm long fixed all as specified and directed. |
| 37 | S&F 150mm long PTMT barrel tower bolts powder coated any colour complete all as specified and directed. |
| 38 | S&F 250mm long Aluminum sliding door bolt powder coated any colour, with hasp and staple bolt type all as specified and directed. |
| 39 | Supply and fix Anodised aluminium, powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. Complete all as specified. |
| 40 | S&F Alumnium powder coated louvers (movable arrangement in pair) for ventilators including locking arrangement complete all as specified and as directed |
| 41 | S&F Figured glass coloured pin headed type 4mm thick fixed to aluminium lovers in strips width not exceeding 80mm all as directed. |
| 42 | M&L for PVC (SWR) Floor trap 75 mm dia ,including 40mm dia HDPE pipe up to the trap of bath room and jointing with solventwith outlet pipes, stainless steel grating etc fixed all as specified. |
| 43 | M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement with outlet pipesand PCC 1:2:4 filling around trap and 25mm thick coverslab (size as directed by EIC) complete all as specified. |
| 44 | S&F of 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed and laid in trenches/floors including distance pieces complete all as specified and directed. |
| 45 | S&F of 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including distance pieces and stack clamps as in SWR pipes complete all as specified and directed. |
| 46 | S&F 110 mm PVC(SWR) Bend of any radius |
| 47 | S&F PVC (SWR) junction single,(Single T) equal or unequal for 110mm dia pipe |
| 48 | S&F 110/75 mm dia PVC(SWR) Reducers connected to door bend with access door complete all as specified |
| 49 | S&F 110 mm trap P or S trap PVC (SWR) complete all as specified. |
| 50 | S&F 75/110 mm dia PVC (SWR) Vent Cowl. |
| 51 | S&F Vitreous china squatting pan, Orissa pattern, size 580x440mm white/ coloured with integral foot rests including flus pipe and connection to trap, and to flushing pipe, anti-syphonage pipe, etc. fixed complete all as specified. |
| 52 | S&F PVC 10 ltr. Capcityvalveless syphonic action type, flushing cistern, low level, white/ coloured with inlet, ball valve, float and handle including brackets and connection to pipe etc with all neccassary fittings complete all as specified directed. |
| 53 | S&F in 15 mm size PVC connections with PTMT nuts of 450 mm long complete all as specified. |
| 54 | S&F Vitreous china Urinal, bowl type, coloured ,flush pipe and waste pipe including providing and fixing plugs, bedding urinal against wall in cm 1:2 securing urinal to plugs fixing with brackets,flush pipe,grating and union for 32mm dia PVC pipe discharge pipe connection to drain etc. |
| 55 | S&F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (minium weight 60gms) |
| 56 | S&F Wash hand basin flat back 550x400mm vitreous chine (white) with cantilever brackets embedded in concrete block including the following and fixed in repairs complete all as specified (a) Brass chromium plated waste coupling 32mm bore size(b) Waste pipe PVC 32mm bore (c) Angle iron/cast iron brackets (d) CP Fancy type pillar cock 15 mm dia. |
| 57 | S&F 600x 450 mm leveled edged mirror, 5mm thick of selected quality glass mounted on hard board covered with PVC moulding as per sample kept in GE office and fixed to wooden plugs with chromium plated brass screwed all as directed. |
| 58 | M&L Soap shelf, PVC white/colour appx size 450 x 125 x 40mm (as per sample). Make: Prayag or equivalent |
| 59 | S&F in repar Tubular towel rail 20mm dia D type60cm long between flanges brass chromium plated. |
| 60 | S&F Bib taps,CP, fancy type screwed for 15mm bore of iron pipe or for brass ferrule and fixed all as specified. |
| 61 | S&F Bathroom cabinet PVC with mirror suitable for to keep the bathroom items, size 400 x 500mm, white colour all as specified. Make : PRIYAG (CAT. NO - 554) |
| 62 | S&F Stop valves, fancy type, CP with long shank and cup ( concealed typee ), screwed both ends for 15mm bore of iron pipe or for union and fixed all as specified. |
| 63 | S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed for 15mm bore pipe all as specified and directed. |
| 64 | S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed for 20mm bore pipe all as specified and directed. |
| 65 | S&F in Mild steel galvanized tubing 15 mm bore medium grade with fittings to walls, ceiling or laid on floor all as specified. |
| 66 | S&F in Mild steel galvanized tubing 20 mm bore medium grade with fittings to walls, ceiling or laid on floor all as specified. |
| 67 | S&F ofrotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 Ltr capesity hoisted and fixed in position all as specified including ball brass valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe complete all as specified and directed. |
| 68 | M&L Preparing new plastered surfaces and applying two coats of white wash on soffits/ceilings etc; complete all as specified or as directed. |
| 69 | Preparation of new plastered surface and apply two coat of cement base paint over a coat of primer with 2mm thick wall care putty complete all as specified. |
| 70 | Preparation of newly plastered surfaces of walls and applying two coats of distemperoil emulsion over a coat of Chalk whiting, on plastered surfaces with 2mm thick wall care putty complete all as specified. |
| 71 | M&L Chequered cement colouredconcrete tiles 300mm x 300mm x 25mm, set, jointed and pointed in thick neat cement slurry in floors and pointed with white cements and pigments andincluding 15 mm thick screed in cement mortar (1:6) as in floors/ sub floors and pointed in white cement with pigment to match the colour of tiles complete all as specified. |
| 72 | Cutting existing Galvanized ironwater supply pipe line up to 100 mm dia for inserting suitable size GI Tee and socket of size 20mm dia for taking branch connection complete all as specified.Note: Excavation shall be measured and paid seperately. |
| 73 | M&L of 150mm bore salt glazed stone ware pipe Grade ‘A’ as in trenches at any depth complete all as specified (Excavation , earth work & concrete shall be measured and paid separately). |
| 74 | M&L PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in benching for manholes, bands , coping , bed plate etc with slightly chamfered or rounded angles including necessary form work, if any, and finishing exposed surface even and smoothwithout using extra cement |
| 75 | Extra for forming fair finish to drain or channel 30cm internal girth in cement concrete using extra cement inl. forms moulds/mitred stopped ends etc. |
| 76 | M & L Precast RCC 1:2:4 type B1 using 20mm graded crushed stone agg as in manhole cover slabs, of any thickness, size or shape incldg necessary form work, finished concrete surfaces fair & even in CM all as specified and directed by Engr - in -Charge. |
| 77 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming bench-ing as required(Internal Dia of pipe in 150mm) |
| 78 | M&L for Point wiring with PVC insulated, FRLS PVC unsheathed,two single core, stranded, copper conductor cable 1.5 Sqmm size, 1100V grade, drawn into and including concealed rigid non-metallic PVC conduit not less then 20mm wide, ISI marked with 1.5 Sqmm unsheathed, stranded copper FRLS cable for continuous earth wire and including pressed modular metal concealed terminal boxes of reqd size and suitable size inner frame with outer cover suitable for modular switches/sockets/regulators all as specified & directed for the folowing :- (a) One light/Fan controlled by one switch |
| 79 | S&F switch piano flush type, 6 amps, 230V AC,single pole, one way. |
| 80 | S&F ceiling rose, surface type, bakelite 65x50mm three terminal |
| 81 | S&F batten 4 feet LED tube light fitting 18W high lumen efficiency, min 5700K and extruded aluminium body with suitable electronic driver, 230Vwith all accessories pre wired,connecting up with and including twin core twisted flexible copper cable complete inclluding taking down unserviceable FTL fitting any type any watts all as specified and directed.Make: Havells/wipro/philips |
| 82 | S&Fbatten 2 feet LED tube light fitting 10W high lumen efficiency, min 5700K and extruded aluminium body with suitable electronic driver, 230Vwith all accessories pre wired,connecting up with and including twin core twisted flexible copper cable complete inclluding taking down unserviceable FTL fitting any type any watts all as specified and directed.Make: Havells/wipro/philips |
| 83 | Sub main wiring with 2 runs of single core 2.5 sqmm 1100 Volts grade, FRLS PVC insulated, unsheathed cable, copper conductor, multistranded drawn through and incl provision of ISI markedPVC conduit 20mm dia medium grade surfcaein walls / roofs / floors etc., including provision of one run FRLS PVC insulated 2.5 sqmm copper conductor as earth continuity conductor and connecting to common earth dolly incl taking down u/s aluminium wiring complete all as specified and directed. Note: Two runs of 2.5sqmm cable, one run of earth continuity conductor shall be measured as one unit length and PVC conduit shall be measured under relevant items. |
| 84 | Supply and fix ventilating Fans Ventil Air - DX White 250mm sweep, 230/240 volt mounting ring and louvers and shutters with clamp sets, nuts and bolts suitable for ventilatort fansincluding provn of connecting cable 1 sqmm, 3 core, PVC insulated all as specified and directed. |
| 85 | Supply and fixing inof energy efficient LED building security fitting of not less than 30 Watt, epoxy powder coated pressure die cast aluminium housing and toughened glass with IP 66 degree of protection, system luminous efficiency morethan 100 lumens / watt and PF>0.9 with voltage range 140 to 270 Volt, fitting should be provided wih inbuilt 10 KV minimum surge protection, short circuit and over voltage protection facility for Driver and fitting including making electrical connection for cable connection complete all as directed. Note :- Cable for connection of LED Light fitting andincluding mounting bracket of GI Pipe 32 mm bore bend to shape with 2 Nos MS flat 32 x 3 mm thick with suitable nuts & bolts for mounting the fitting shall be is included in this item and nothing shall be paid extra on this account |
| 86 | S&F sheet metal enclosure (MCB DB), single phase and neutral with suitale Amps rated bus bar, double door type, 240 volts 4 way- |
| 87 | S&F MCB single pole, 240 volts, 6Amps, \"C\" series, 10 KA breaking capacity & connection complete all as specifed and directed. |
| 88 | S&FMCB single pole & neutral10amp, 240 volts, \"C\" series, 10 KA breaking capacity & connection complete all as specifed and directed. |
| 89 | S&F fix inEarthing complete with galvanised steel earth plate electrode 60x60cm x 6.0mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to and including using of 4 mm GI wire as earthing leadby means of bolts, nuts, check nuts and washers of galvanised steel , connected to earthing test point, all as specified & indicated, including testing on completion including earth work and excavation in any type of soil/rock, PCC 1:3:6 type C1, earthing chamber, precast RCC slab 50mm thick in cement concrete 1:2:4 type B1 reinforced with welded steel wire febric weight hot less than 4 Kg/Sqm, funnel with GI watering pipe of 20mm bore, medium grade wire mesh and lugs, GI protection pipe of 15mm bore light grade upto 7.50 mtr long test point etc all as specified and directed. |
