Repair / Replacement Of Joinary, Plumbing Fittings Etc And Allied B And R Otm Accn Of Nco Academy At Dhana Mil Stn.
Tender Value
10 Lakhs
Estimated cost
Bid Submission
25 Jul 2022
0 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
dhana → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair / Replacement Of Joinary, Plumbing Fittings Etc And Allied B And R Otm Accn Of Nco Academy At Dhana Mil Stn.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 04-Jul-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 11-Jul-2022 |
| 2 | 06-Jul-2022 | Corrigendum_date | Date | 19-Jul-2022 |
| 3 | 21-Jul-2022 | 12_Corrigendum_date | Date | 25-Jul-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down wooden chowkhats or frame area exc 1.5 Sqm and not exc 4 Sqm Each with shutter (without taking off shutter from frame), complete all as specified and directed. |
| 2 | All as per item No 1 above but not exc 1.5 Sqm Each, complete all as specified and directed. |
| 3 | Taking down wooden shutter of any description exc 1 Sqm and not exc 2 Sqm Each complete all as specified and directed. |
| 4 | Supply & fixing 2nd class hard wood plain solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints, complete including treating the ends of chowkhats with coal tar/black paint etc, complete all as specified and directed. |
| 5 | Supply & fixing 105 x 60 mm size Pressed steel frames 1.25mm thick for doors with onerebate including necessary fixing lugs, hinges, lock strike plate, and making good with plastering in CM 1:4 including distempering as required at site etc, complete all as specified and directed. |
| 6 | Supply & fixing 165 x 60 mm size Pressed steel frames 1.25mm thick for doors with two rebate including necessary fixing lugs, hinges, lock strike plate, and making good with plastering in CM 1:4 including distempering as required at site etc, complete as specified and directed. |
| 7 | Supply & fixing 35mm thick factory made second class hard wood Glazed and skeleton door shutters, open rebated and prepared to receive gauze with sash bars, edges of framing plain fitted with cut and mitred beads (all around of 1st class soft wood) for securing wire mesh or glass, size of members of shutter as specified in SSR Pt-I Sec-8 clause 8.24(b) fitted to chowkhats, complete as specified and directed. |
| 8 | Supply & fixing 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engr in Charge. |
| 9 | Supply and fixing powder coated anodised aluminium frame Minimum thickness of 1.5 mmfor doors, windows, ventilators with one or more rebates, including jointing cleat for fixing etc. complete all as specified and directed. Note :- Minimum thickness of powder coating 50 micron. |
| 10 | Supply and fixing aluminium anodised powder coated door shutters of aluminium section Minimum thickness of 1.5 mm including necessary jointing cleats, glazing clips, ruber neoprene packing , aluminium anodised powder coated fittings such as handle 2 nos, 100mm hinge 3 nos , 200 tower bolt 2 nos , mortice lock including keys 1 set , anodised aluminium snap beading & screws complete all as specified and directed. Note :- Minimum thickness of powder coating 50 micron |
| 11 | Supply and fixing aluminium anodised powder coated window and ventilator shutters side hung type or sliding type with orwithout sash barsof aluminium section weighing minimum 0.55 kg/mtr including necessary jointing cleats, glazing clips, ruber neoprene packing , anodised aluminium snap beading , screws including powder coated anodised aluminium fittings such as peg stay 150mm long (1 no), hinge type B-21 100mm long (2 nos), suitable handle (2 no), tower bolt(2 nos), complete all as specified and directed. |
| 12 | Supply and fixing aluminium anodised grill of aluminium section Over 50 mm Pitchincluding necessary jointing cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws complete all as specified and directed. |
| 13 | Supply & Fix 18 mm thick Plywood over door / window frame and walls in girth not less than 0.60 M in interior decoration complete with necessary fitting like glue or any other binding material and ply filling in gap between wall and Plywood frame etc, complete all as specified and directed by Engr in Charge. |
| 14 | Supply & Fix 8 mm thick Plywood over door / window flush Shutters in interior decoration fixed with glue or any other binding material for groove cutting or any other design, complete all as specified and directed by Engr in Charge. |
| 15 | Supply & Fix 1.00 mm thick laminates / Sunmica/ decorative face veneers in any design/colour/pattern over door / window flush Shutters or Plywood in interior decoration fixed with glue or any other binding material, complete all as specified and directed by Engr in Charge. |
| 16 | Supply & Fix fancy brass assembly handle lock with Key set in interior designed flush shutters any size and colour complete all as specified and directed by Engr in chargeMake:- godrej / Link |
| 17 | Supply & Fix shuttering Magnet complete all as specified and directed. |
| 18 | Supply & Fix pointed backside door stopper complete all as specified and directed. |
| 19 | Providing and fixing ECO-4000 series pre-coated double rebated openable window or ventilator made out of galvanised steel colour coated/powder coated (base steel as per IS 513 of \"D\" quality galvanised as per IS 277 with zinc of 120 gm/Sqm) with total thickness of coating 0.58 microns finished painted with polyester paint of 12 to 16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with polyester powder up to 50-60 microns thick outer frame section 72x55 mm, centre mullion section 72x50 mm, shutter section 47x20 mm, fly mesh section 40x20 mm and the fixed glass beading section 12x12 mm outer frame and mullions shall consist rebate for glazed shutter, fly mesh and 20 mm provision for guard bars/grills, the section cut to length miter jointed with corner brackets, center mullions fixed with mullion cap, stay handles, latch 2 Nos of heavy duty stainless steel pivot hinges per shutter and paneled with 5 mm thick pain float glass and stainless steel (304 grade) mesh for fly mesh shutter fitted with EPDM (Ethyl Propylene Diamine Monomer ) gaskets including fixing window with concrete/stone or brick masonry wall by means of self expanding sleeves and driving MS electroplated 80 mm long bolt into the sleeves through frames (Minimum 4 nos for 1600mm high windows, 3 Nos for 1200 mm less window and 2 nos in ventilator ), including 10 mm square bars welded to 6x12 mm flat at a distance 125 mm c/c etc as per direction of engineer in chaege. Note:- Refer TD No CELZ/C-TD/102 sheet 1/2 and 2/2 |
| 20 | Supply & fixing solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet & edges will be painted to match with printed sheet as reinforced with M.S. square tube and fixing in opening as per specification & drawing, complete all as specified and as directed by the Engineer-in-Charge. |
| 21 | Supply & fixing factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face & 2mm thick plain colour PVC sheet on back face, fixing in frame at site as per specification & drawing, complete all as specified and as directed by the Engineer-in-Charge. |
| 22 | Supply & fixing in repairs 15mm bore 3-hole wash hand basin mixer with pop up waste system to mix hot and cold water fixed to iron pipe or PVC connection complete all as specified and directed. |
| 23 | Material & labour for mild steel work in framed work such as grills, gratings, guard bars etc., including angle frame and hinges where required with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe 290.Gde-E-165, complete all as specified and directed. |
| 24 | Material & labour for mild steel 0.63 mm thick, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched, including round headed screws clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joint with riveted or welded seams, including bending or turning up mitred angles etc as requires, complete all as specified and directed. |
| 25 | Material and labour for framed work Fe 410-W (Grade - E-250) as in door or gates of angle or other section with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings etc, complete all as specified and directed. |
| 26 | Supply & fixing in repairs sheet glass ordinary quality & glazing with wooden bead/oil putty in Square n.exc 0.5 Sqm in Each panel 3 mm thick complete all as per specified and directed. |
| 27 | Supply & fixing tinted / coloured floated glass ordinaryquality & glazing with wooden/ aluminium bead/oil puttyin Square n.exc 0.5 Sqm in Each panel 4 mm thick complete all as per specified and directed. Make:- Modiguard/ saintgobin / Hariyana glass |
| 28 | Supply & fixing Stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples, complete all as specified and directed. |
| 29 | Supply & fixing in repair Stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples, complete all as specified and directed. |
| 30 | Supply and Fixing of Stainless steel Drapery Rods (curtain rods) of 25 mm dia along with all accessories as per requirements such as Holding Bracket, Finials (End capping), screws, fissures etc. Including fixing of same on the desired door windows locations on all floors and in any length, complete all as specified and directed. |
| 31 | Supply and fixing 100 mm butt hinges medium weight cold rolled mild steel ISI marked fixed with screws complete all as specified and directed. |
| 32 | Supply & fixing 150mm extruded aluminium alloy handles, fabricated type anodized, complete all as specified and directed. |
| 33 | Supply & fixing 150mm long aluminium anodized barrel tower bolt of extruded section, complete all as specified and directed. |
| 34 | Supply & fixing 300mm long aluminium anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheets cast of extruded sections and fixing bolt and sliding bolts of extruded sections of cast aluminium alloy, complete all as specified and directed. |
| 35 | Demolition of brick / stone masonry built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed. |
| 36 | Material & labour for brick work with sub-class `B\" bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6, complete all as specified and directed. |
| 37 | Taking down cement plaster on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc, complete all as specified and directed. |
| 38 | Material and labour for 15mm thick renderingin cement mortar 1:4 on fair faces of brick work or concrete surfaces finishing the surface even and smooth without using extra cement, including preparing new plastered surface of wall and applying two coats of white wash, complete all as specified and directed. |
| 39 | Material and labour for 15mm thick renderingin cement mortar 1:6 on fair faces of brick work or concrete surfaces finishing the surface even and smooth without using extra cement, including preparing new plastered surface of wall and applying two coats of white wash, complete all as specified and directed. |
| 40 | Supply and fixing 10 to 15 mm Toughened glass door shutters including necessary jointing cleats, glazing clips, rubber neoprene packing, stainless steel fittings such as handle 2 nos, 100mm hinge 3 nos, lock including keys 1 set, Stainless steel snap beading & screws complete all as specified and directed. |
| 41 | Supply and fixing frosted film or logo in any type or design and size complete all as specified and directed. |
| 42 | Material and labour for Double action Floor Spring Hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other part made of mild steel heavy duty and fixed for toughened glass door etc, complete all as specified and directed. |
| 43 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises, complete all as specified and directed. |
| 44 | Material & labour for 15 to 18 mm thick granite machine cut bedded and jointed with grey cement slurry and pointed with white cement and pigment to match the shade of granite including grinding and polishing in cooking platform complete over and including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with CM 1:6., complete all as specified and directed. |
| 45 | Rounding to edges of the stone slab on edge such as cooking platform and other similar work., complete all as specified and directed. |
| 46 | Material & labour for15 to 18 mm thick granite machine cut bedded and jointed with grey cement slurry and pointed with white cement and pigment to match the shade of granite including grinding and polishing complete in skirting over and including backing coat 10 mm thick in cement mortar 1:4, complete all as specified and directed. |
| 47 | Material & labour for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) light shedpolished, area of each tiles exc 0.18 sqm andnot exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes withCM 1:6, complete all as specified and directed. |
| 48 | Material & labour for vitrified tiles 10mm thick (square or rectangular ) light shed, polished area of each tiles not exceeding 0.36sqm in vertical surfacesetc set and jointed in neat cement slurry and pointed in white or cloloured cement to match including backing coat 10mm thick in CM 1:4, complete all as specified and directed. |
| 49 | Material & labour for Non-skid ceramic colour tiles 7 to 8 mm thick, (square/rectangular), area of each tiles exceeding 0.09 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:4 complete all as specified and as directed. |
| 50 | Material & labour for glazed coloured ceramic, designer/ concept pattern tiles 300mmx600mm / 300mm x 450mm x7mm thick set and jointed in neat cement slurry in vertical surfaces and jointed in white cement with pigment to match colour over 10mm thick rendering in CM (1:4) including taking down old dado/skirting/wall finishes of any description, complete all as specified and directed. |
| 51 | Material & labour for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) Double charged polished, size of each tiles 800 mm X 800 mm / 600 mm X 1200 mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes withCM 1:6, complete all as specified and directed. |
| 52 | Material & labour for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) Double chargedpolished, size of each tiles 600 mm X 600 mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes withC M 1:6, complete all as specified and directed. |
| 53 | Material & labour for Machine cut kota stone slab flooring 20-25mm thick over 15 mm thick cement screed 1:6base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 54 | Material & labour for Bees-wax polishing on kota stone/ granite or any other surfaces of any description, width or girth including cleaning and preparing the surfaces complete all as specified and directed. |
| 55 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. including cement mortar bedding (but not backing). complete all as specified and directed. |
| 56 | Material & labour for machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 57 | Material & labour for Marble of green shade other than white and black, 18 to 20mm thick (table rubbed and polished) in steps, bathroom self, corner(including necessary cutting chasing) jambs, pillars, window cills, cocking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed |
| 58 | Material & labour for precast cement concrete type B1 1:2:4 (20mm graded aggregate) solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) are setting in mortar 1:4 complete all as specified and directed. |
| 59 | Material & labour for 25 mm thick PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) in floor, sub base complete all as specified and directed. |
| 60 | Material & labour for PCC 1:4:8 type D2 (using 40mm graded stone aggregates) as in foundation and path and hard standing, complete all as specified and directed. |
| 61 | Material & labour for Sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed. |
| 62 | Material & labour for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid with Grey cement and pigment all as specified and directed by Engr in charge. |
| 63 | Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed. |
| 64 | Supply & fixing steel water tubing medium grade galvanizes fixed to walls, floors, roof ceiling etc including all tube fittings of 15mm bore complete all as specified and directed. |
| 65 | Supply & fixing in repair 15mm bore ball valve, high pressure with epoxy coated aluminium rod and high density plastic valve screwed for iron pipe and fixed of 20mm dia (min wt 210 grms) complete all as specified and directed. |
| 66 | Supply & fixing in repair vitreous china wash basin white flat / Table top back size 550x400mm including PVC waste pipe, CP pillar tap Sawn neck CP waste coupling brackets,PVC connections 15mm dia 450mm long complete all as specified and directed. |
| 67 | Supply & fixing for bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board on commercial plywood or wall and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 68 | Supply & fixing in repair Bib tap 15mm standard of cast copper alloy with crutch or butterfly handle screwed down for iron pipe and fixed complete all as specified and directed. |
| 69 | Supply & fixing in repair 15mm stop valve standard of cast copper alloy with crutch or butterfly handle high pressure screwed for iron pipe and fixed complete all as specified and directed. |
| 70 | Supply & fixing in repair 15mm dia shower rose of PTMT any colour high pressure screwed for iron pipe and fixed (min wt 40 grms ) complete all as specified and directed. |
| 71 | Supply & fixing in repairs vitreous China squatting pan, \"Orrissa\" pattern, size 580 mm x 440 mm white, with integral foot rests (excluding flushing cistern, flush pipe and waste pipe) and ‘P’ or ‘S’ trap front or back inletincluding concrete bedding, complete all as specified and directed. |
| 72 | Supply & fixing in repair vitreous china wash down water closet pan (pedestal pattern ) white including plastic water closet set black closed pattern with flat bottom and cover with mild steel chromium plated hinging devices and chromium plated Jet arrangement with 1.00 mtr long flexible pipe for fixed with suitable system complete all as specified and directed. |
| 73 | Supply & fixing as in repair 10 ltr capacityPVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve , float and handle including brackets, and PVC connection 15mm diacomplete all as specified and directed. |
| 74 | Supply & fixing 20mm dia brass CP tubular towel rail D type 60 cm long fixed with bracket complete all as specified and directed. |
| 75 | Supply & fixing 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete as directed. |
| 76 | Supply & fixing in repair kitchen sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160mm complete all as specified and directed. |
| 77 | Supply & fixing in repair vitreous china Half Stalltype urinal (minimum), with grating and union for discharge pipe(includingflush pipe, and waste pipe), complete including providing and fixing plugs, bedding urinal against wall in CM 1:2 and including 60cm long brass screws pointing around urinal back in cement etc complete all as specified and directed. |
| 78 | Demolition of un-reinforced cement concrete in ground floors and paving not exceeding 15 cm thickness. (Below or above ground level), complete all as specified and directed. |
| 79 | Material & labour for 40 mm thick PCC 1:2:4 type B1 (using 20 mm gradedstone aggregate) in floorings including finishing the surface even and smooth with using extra cement, complete all as specified and directed. |
| 80 | Supply & fixing glass dividing strips, 38 x 3 mm thick and inserted in position, confirm to design, complete all as specified and directed. |
| 81 | Material & labour for 50mm thick cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate finished even & smooth without using extra cement as in plinth protection including forming joint to full depth at every 3.0m in formingand at every charge of direction and filled mixture of bitumen and sand (1:3) by weight, complete all as specified and directed. |
| 82 | Material & labour for preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of Pink primer complete all as specified and directed. |
| 83 | Material & labour for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxideprimer, complete all as specified and directed. |
| 84 | Material & labour for preparation of old wooden based painted surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 85 | All as per item No. 84 abovebut one coat of synthetic enamel paint over old steel surfaces complete all as specified and directed. |
| 86 | Material & labour for a coat of Birla putty 1 mm thick as per manufacturer\"s instruction on wall surfaces including complete removal of existing treatment & preparation of old decorated surfaces all as specified and directed by Engr-in-Charge. |
| 87 | Preparation of old decorated surfaces of wallsincluding, corners, pillars etc by washing, scraping, rubbing & brooming down one coat of oil bound distemper including filling of minor holes/cracks with putty & removing nails etc complete all as specified & directed. |
| 88 | All as per item No. 87 above but two coat of oil bound distemper complete all as specified and directed. |
| 89 | Supply & fixing HDPE pipes or pressure rating 6kgf/sqcm of 40 mm dia fixed/concealed on walls or floors complete all as specified and directed. |
| 90 | NOTE :- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs 15,620.00 /- ] |
AI Tender Summary
Tender Timeline
Jul 21, 2022
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 11, 2022
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 19, 2022
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 25, 2022
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
CompletedJul 25, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 27, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender