Public Works Department-PWD has published Deposit Cabin Restructuring Works In Sub Treasury , Vaikom Cabin Restructuring-General Civil Work Multi Wood Is Proposed For Cabin Work Granite Slabs Are Proposed As Cabin Top Covering And Front Projected Portion. Aluminium Work , Prelaminated Particle Bo. Submission Date for this Tender is 29-06-2022. Civil Work Tenders in vaikom Kerala. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | APPENDIX-ACabin Restructuring |
2 | 15.57:Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 metres lead as directed by Engineer - in-Charge |
3 | OD80190/2021-2022:Providing and fixing Thomson Multi wood board or equivalent make,(colour or laminated) in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer or edge bond tape(fittings to be paid separately) as per the direction of site Engineer-in-charge. |
4 | 9.79.2:Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.50 mm |
5 | 9.81.3:Providing and fixing bright finished brass handles with screws etc. complete:75 mm |
6 | 9.101.2:Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Twin rubber stopper |
7 | 9.114.1:Providing and fixing magnetic catcher of approved quality in cupboard/ward robe shutters, including fixing with necessary screws etc. complete.Triple strip vertical type |
8 | 9.115:providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer -in-charge. |
9 | 9.116:Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by with stainless steel rollers to run inside C or E aluminium channel section ( The payment of C or E channel shall be made separately |
10 | 21.17:Providing and fixing anodised aluminium grill ( anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.(Only weight of grill to be measured for payment ). |
11 | OD78964/2021-2022:Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for cabinplatforms, vanity counters,facias and similar locations, of required size, approved shade, colour and texture laid over suitable frame work, joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Area of slab over 0.50 sqm |
12 | OD78963/2021-2022:Providing and fixing 12 mm thick frameless toughened glass of approved brand and manufacture, including providing and fixing stainless steel glass holder and making necessary holes etc. for fixing glass panels, all complete as per direction of Engineer-in-charge. |
13 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) |
14 | 13.48.2:Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.75 ltr/10 sqm of approved brand and manufacture |
15 | 21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) |
16 | 21.2.1:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side |
17 | 21.3.2:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness |
18 | OD80414/2021-2022:Providing and fixing Wire manager of EBCOor similar make. |
19 | OD80417/2021-2022:Providing and fixing Etching on 12 mm glassincluding fixing and labour charges etc. complete as per the drawings and the directions of the Engineer-in-charge |
20 | OD80418/2021-2022:Providing and fixing Autoclose hinges7.5 cm in size including screws and labour. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail