Renovation Of Switchyard Road, Gate And Guard Room At 132Kv Substation, Bhowai Under 220Kv Oandm Division, Ptcul, Haldwani
Tender Value
Ref. Documents
Estimated cost
Bid Submission
20 Jul 2022
0 days left
EMD
35500
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bhowali → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation Of Switchyard Road, Gate And Guard Room At 132Kv Substation, Bhowai Under 220Kv Oandm Division, Ptcul, Haldwani
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 2 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 4 | Providing and laying specified grade of reinforced cement concrete exciuding the cost of centering shuttering finishing and reinforcement all work upto plint level 1:3:6 (1 cement :3 sand :6graded stone aggregate 20 mm nominal size . |
| 5 | Providing and laying specified grade of reinforced cement concrete exciuding the cost of centering shuttering finishing and reinforcement all work upto plint level 1:4:8 (1 cement :4 sand :8graded stone aggregate 40 mm nominal size . |
| 6 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement :4 coarse sand) |
| 7 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete(1:6:12) (1 cement :6 sand : 12graded stone aggregate 20 mm nominal size ). upto plinth level with cementmortar 1:6 (1 cement :6 sand). |
| 8 | Plaster work12mm in ratio 1:4 at Pillars & Guard room including all materiallabour T&P etc. |
| 9 | Dismantling Brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material withing 50 metres lead asper direction of engineer in charge . 15.7.4 in cement mortar. |
| 10 | Laying and fitting of Galvanized Wire Mesh Security fencing with the help of Nut Bolt & MS Angle and MS Flat including Making Holes ,Welding etc |
| 11 | Laying & Fitting of Barbed wire in three straight and one in Zig Zag Shape. |
| 12 | Providing & Fabrication ,Bolting etc of MS Angle 65x65x5 and 45x45x5 for making Structure. |
| 13 | Painting work of all MS Angle & Flat with one coat of primer and two coats of Silver Paint. |
| 14 | Providing, Laying, Cutting&Binding ofSteel Bar of different sizesincluding all materiallabour T&P etc. |
| 15 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. |
| 16 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strikeplate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineerin-charge: Profile B Fixing with adjustable lugs with split end tail to each jamb |
| 17 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 18 | Providing and fixing pressed steel window frames, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead ( if required ), mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge. Modified Profile B having single rebate on both side as in intermediate members. |
| 19 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class teak wood 35 mm thick |
| 20 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) |
| 21 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 22 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete. |
AI Tender Summary
Tender Timeline
Jun 20, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 21, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender