|
| 1 | Dismantling the existing RCC including clearing away from site etc.,complete |
| 2 | Dismantling the existing damaged weathering course with pressed tiles including clearing away from site etc.complete |
| 3 | Dismantling the existing brick masonary including clearing away from site etc., complete |
| 4 | Dismantling the existing damaged wall and floor tilesincluding clearing away from site etc., complete |
| 5 | Supplying and filling with M sand in layers of 15cm thick including watering and ramming to consolidation etc.,complete. |
| 6 | Plain cement concrete 1:5:10 (one cement, five sand and ten aggregates) mix using 40mm ISS gauge HBBG matel for foundation and flooring etc., complete. |
| 7 | Providing Steel Centering and shutteringstrutting arrangements for sides and soffits etc., complete. |
| 8 | Withstrutting etc., complete. |
| 9 | Withoutstrutting etc., complete.-(Drain) |
| 10 | Column etc., complete. |
| 11 | Supplying,cutting,bending,tying andfixing inposition ofRTS grills including cost of steel and binding wire etc., complete |
| 12 | Plain cement concrete 1:2:4 mix (One cement,Two M sand and four aggregate) using 20mm ISS gauge HBBG metal from the approved quarry including mixing,laying,consolidating,curing cost and conveyance of all materials to site and all labour charges etc complete. |
| 13 | Providing Steel Centering and shutteringstrutting arrangements for sides and soffits etc., complete. |
| 14 | for basement |
| 15 | for superstructure |
| 16 | Reinforced cement concrete 1:2:4 mix (One cement,Two M sand and Four aggregate) using 20mm ISS gauge HBBG metal for precast slab of 75mm tk including moulding,casting,curing cost and conveyance of all materials to site and all labour charges etc complete. |
| 17 | Providing Steel Centering and shutteringstrutting arrangements for sides and soffits etc., complete. |
| 18 | foundation and basement |
| 19 | for superstructure |
| 20 | Supplying and fixing inposition of MS grill using necessary MS angle with one coat of red oxide paint and the shutter properly fixed inposition etc.,complete. |
| 21 | Finishing Top with one course of pressed tiles of size 20x20x2cm thick laid in Cement Mortar 1:3 mix with water proofing compound wall as per Indian Std Specification 2% by weight of cement use & pointing with same mortar etc., complete. |
| 22 | Supplying and fixing inposition of 20 BWG MS plain sheet shutter door of size 70x170cm framed with alround MS angle iron of size 30x30x5mm with one ledge and two braces made out of MS flat 30x5mm size without door frame but with necessary gudjin pins and locking arrangements on both sides complete.The 20 BWG GI plain sheet should cover the MS angle frame alround in such a way that there would not be any exposition of the angles to avoid any rusting.The fastening of the GI sheet with the angle iron frame must be with aluminium rivets at 25cm C/C.The entire shutter door must be painted with one coat of red oxide paint and the shutter properly fixed in position etc.,complete. |
| 23 | Supply and fixing in position of white glazed indian oriya type water closet 580 x 440mm size white glazed earthernware of approved quality with S or P trap confirming to IS: 2556-part XII with sand cusion and forming flooring around the closet using 40mm broaken brick jelly in lime concrete1:4:8 mix, 100mm thick using 20mm ISS gauge brick jelly and finished the top to required slop and including giving necessary connection to cast iron soil pipes by dismantling brick masonry, RCC/ floor slab and making good of the disturbed portion to original condition without leakage etc. complete complying with std. specifications and as directed by dept. officers |
| 24 | Supplying and fixing in position best quality approved make white glazed earthen ware wash hand basin size 550x400mm with a pair of cast iron brackets including cost of 15mm F brass chromium plated pillartap,32mm F CP waste,32mm F PVC waste pipe with rubber plugs and chain,15mm F GM Wheel valve 15mm F brass nipple,15mm F Nylon connections etc Including fixing the wash hand basin in the wall in position with a pair of CI Brackets with teak wood plugs and screws and giving necessary water supply connection and paintingthe brackets with two coats of paint over a priming coat of anticorrosive paint including testing for leakage etc. complete as per standard specifications. |
| 25 | Special ceiling plastering with cement mortar 1:3 mix 10mm thick etc., complete |
| 26 | Plastering with cement mortar 1:3 mix 12mm thick etc., complete |
| 27 | Plastering with cement mortar 1:5 mix 12mm thick etc., complete |
| 28 | Dadooing and skirting the wall with glazed tiles of size 150x300x6mm thick laid in cement mortar 1:2 mix 10mm thick and pointing with white cement using 0.40 kg/cm2 including finishing the joint and pointing flush with tiles surface etc.complete |
| 29 | Supply and fixing of following water supply materials at site with best quality etc.,complete |
| 30 | 110 mm dia PVC pipe 6 ksc |
| 31 | 110 mm dia PVC Elbow(mould) |
| 32 | 110 mm dia PVC tee(mould) |
| 33 | Pvc adhesive-110mm dia pvc pipe |
| 34 | 25mm dia UPVC Pipe SCH-80 |
| 35 | 25mm dia UPVC coupling |
| 36 | 25mm dia UPVC Union |
| 37 | 25mm dia UPVC Elbow |
| 38 | 25mm dia GM Gate valve |
| 39 | 15mm dia half turn tap |
| 40 | Solvent Cement- 118ml |
| 41 | Conveyance ofPVC rigid pipes to proper grading and alignment jointing with pre cement paste and testing to the required pressure etc., complete. |
| 42 | 110mm dia pvc pipe |
| 43 | Supply and fixing in position of European water closet with \"S\" (or) \"P\" trap of approved color and quality with dauble flapped rigid PVC sheet cover the CP brass hinges etc., complete complying with standard specification including supply and fixing in position of 10litre capacity glazed porcelain low level flushing tank on wall including 2 Nos of 15mm & brass nipple, 15mm dia PVC brass connection, 15mm dia GI wheel value, 15mm dia Nylon connection and giving necessary water supply connection etc., complete |
| 44 | Flooring with ceramic tiles of size 305x305x6mm of approved colour and quality in cement mortar 1:3 mix and pointing with the same mortar etc.complete and finish very neatly etc.complete. |
| 45 | Supply and fixing inposition of DI man hole cover of size 600x600mm-40kgincluding cost of all materials and labour charges etc., complete. |
| 46 | Supply and fixing inposition of DI man hole cover of size 300x300mm-33kgincluding cost of all materials and labour charges etc., complete. |
| 47 | Supply and Laying of 4 of 7/20 Sq.mm PVC insulated wire etc.,Complete |
| 48 | Supply and fixing of single box type 4\"40W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceilig with flu tube with PVC unsheather copper leads from terminals SD(88) |
| 49 | Paving the floor with best approved quality fine polished Tandon Shagbad green stone slab of size 610 x 610 x 20mm laid over a cement mortar 1:3 mix, fixing the slab in true tight angles with minimum possible width of joints and polishing the joints with cement mortar 1:3 mix and polishing with floor polisher to a high degree to finish and curing etc. complete as directed by depat. officers. |
| 50 | Paving the floor with best approved quality fine polished granite stone slab of size 1200x610x20mm laid over a cement mortar 1:3mix,fixing the slab in true tight angles with minimum possible width of joints and polishing the joints with cement mortar 1:3mix and polishing with floor polisher to a high degree to finish and curing etc. complete as directed by depat. officers. |
| 51 | Removing and refixing the existing TAMIN paver block of size 63mm thick in uniform shape of approved make to be laid in lorrying bone pattern with approved non sticking surface in the top and the rate including levelling the base,preparation of sub base with sand cushion 100mm thick,laying out the pavement,cut the pieces to fit the edge,vibrating the pavers,sweeping the sand grouting,providing transporting,loading,unloading and laying of paver block as per standard specification |
| 52 | Supplying and fixing 110mm dia PVC rain water down fall pipe including cost of pipe, shoe, bend, brackets, teakwood plugs, etc., complete |
| 53 | White washing with two coats using best shell lime etc complete |
| 54 | Painting with two coats of readymix plastic emulsion paintof approved colour to new wall surface including curing and finishing etc., complete |
| 55 | Painting with two coats of synthetic enamel paint of quality and colour to new iron work etc., complete |
| 56 | Painting with two coats of synthetic enamel paint of quality and colour to old iron work etc., complete |
| 57 | Supply and fixing of vinyle name board with corporation embalom and lettering asin Tamil as directed by the departmental officers including framed with 50x25mm country wood reepers outer finished with 1”x1” Aluminium beeding with all material and labour cost for fixing etc., complete |
| 58 | Supply and fixing ofvinyle ladies and gents figure board of size 0.30x0.30m size as directed by departmental officers with all material and labour cost for fixing etc. complete. |
