Construction Of C / O Link Road To Village Kuwall Km 0 / 00 To 0 / 535. P / L M / T At Rd 0 / 0 To 0 / 535. ( Mmgsy )
Tender Value
5.80 Lakhs
Estimated cost
Bid Submission
25 Jun 2022
0 days left
EMD
11600
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
jaisinghpur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of C / O Link Road To Village Kuwall Km 0 / 00 To 0 / 535. P / L M / T At Rd 0 / 0 To 0 / 535. ( Mmgsy )
BOQ
| Sl. No. | Item Description |
| 1 | Providing laying spreading and compacting by mechanical means 75 mm (seventy five millimetre) compacted thickness broken /crushed of stone aggregateof size 63mm to 45mm (sixty three millimetre to forty five millimetre) Grading-II towater bound Macadam specification including spreading in uniform thickness using template,hand packing, rolling with three wheel 80-100 (eighty to hundred ) K.N. static roller in stages to proper grade andcamber including applying and brooming, stone screening type-B of size 11.2mm (eleven decimal two millimetre) nominal size at the rate of 0.20 cum (zero point two zero cubic metre) per ten square metre and binding material at the rate of 0.06(zero decimal zero six) cubic metre per ten square metreto fill up the interstices ofcoarseaggregate, watering andcompacting to the requireddensity as per drawing and M.O.R.D. technical specifications section400 and as per the directions of Engineer-in-Chargeincluding carriage of materialwithin all leads, lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .The rate is including octroi, royality, GST, toll tax or other taxes imposed by the government. |
| 2 | Providing laying spreading and compacting by mechanical means 75 mm (seventy five millimetre) compacted thickness broken /crushed stone aggregateof size 53mm to 22.4mm (fifty three millimetre to twenty two point four millimetre) nominal size Grading-III towater bound Macadam specification including spreading in uniform thickness using template,hand packing, rolling with three wheel 80-100 (eighty to hundred) K.N. static roller in stages to proper grade andcamber including applying and brooming, stone screening type-B of size 11.2mm (eleven decimal two millimetre) nominal size at the rate of 0.18 cum(zero point one eight cubic metre) per ten square metreto fill up the interstices ofcoarseaggregate, watering andcompacting to the requireddensityas per drawing andM.O.R.D. technical specifications section 400 and as per the directions of Engineer-in-Chargeincluding carriage of materialwithin all leads , lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .The rate is including octroi, royality, GST, toll tax or other taxes imposed by the government. |
| 3 | Providing and applying primer coat with BITUMEN emulsion (SS-1) on the prepared surface of granular base including cleaning of road surface with hydraulic brooms and spraying primer @0.85 Kg. per Sqm.( zero point eight five kilogram) persquare metre using mechanical means as perM.O.R.D. technical specifications section 500 and as per the directions of Engineer-in-Chargeincluding carriage of materialwithin all leads, lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .The rate is including octroi, royality, GST, toll tax or other taxes imposed by the government. |
| 4 | Providing and applying tack coat with Bitumen emulsion(RS-I) using emulsion pressure distributor at the rate of 0.275kg. (zero point two seven five kilogram) per Square metre on the prepared granular surface treated with primer and cleaned with hydraulic broom as per M.O.R.D. technical specifications section 500 and as per the directions of Engineer-in-Chargeincluding carriage of materialwithin all leads , lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .The rate is including octroi, royality, GST, toll tax or other taxes imposed by the government. |
| 5 | Providing, laying and rolling of open-graded premix carpet of 20 mm (twenty milimetre) compacted thickness composed of 13.2 mm (thirteen decimal two milimetre)to 5.6 mm (five decimal six millimetre) aggregates at the rate of0.27 Cum.( zero point two seven cubic metre) mixed with bitumenviscosity grade-ten (V.G-10 ) at the rate 14.60 Kg. ( Fourteen point six zero kilogram) per ten Square metres of road surface to the requiredline, grade and level to serve as wearing course on a previously prepared base, including mixingandheating binder andaggregate in Hot mix Plant 30/40 ( Thirty / Forty) Tonne per hour capacity, transporting mixed material with tipper and laying with paver finisher to the required grade and camber and rolling with a three wheel 80-100 (Eighty - Hundred) KN static road roller,capacityfinished to required level and grades to be followed by seal coat as per MORD Technical Specification section 500 as per the entire satisfaction and direction ofthe Engineer-in-Charge excluding the cost of tack coat and seal coatincluding carriage of materialwithin all leads, lifts and other incidentals.The rate is including octroi, royality, GST, toll tax,or other taxes imposed by the government. |
| 6 | Providing and laying seal coat for sealing the voids in a bituminous surface laid to specified level grade and cross fall using type-B premixed with 6.80 kg (Six point eight zero kilogram) pentration grade bitument VG-10 (Viscosity grade- Ten)with 0.06 (Zero point Zero six) Cubic metre of fine aggregate per 10sqm (ten square meter) of road surface heated in mini hot mix plant and laying manually of mixed material and rolling with power road roller 8 - 10 tonne (eight to ten) tonne capacity including carriage of material / machinery and equipement required to execute work to the site of work complete in all respect within all leads , lifts aas per entire saticfication and direction of Engineer -In-Charge as per MORD technical specification section 500.The rate is including octroi, royality, GST, toll tax,or other taxes imposed by the government. |
AI Tender Summary
Tender Timeline
Jun 20, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJun 25, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 27, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender