Conversion Of Earthern Road Into Bt Road At Arivolinagar Vivekanadhar Sathukkam From Kumar And Brothers Factory To Abs Plastic Industrials Ward No 4 In Madukkarai Municipality
Tender Value
Ref. Documents
Estimated cost
Bid Submission
04 Jul 2022
0 days left
EMD
21000
Bank guarantee accepted
Document Fee
7080
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
madukkarai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Conversion Of Earthern Road Into Bt Road At Arivolinagar Vivekanadhar Sathukkam From Kumar And Brothers Factory To Abs Plastic Industrials Ward No 4 In Madukkarai Municipality
BOQ
| Sl. No. | Item Description |
| 1 | Construction of Granular sub base by providing close graded materials mixing in a machanical mix plant at CMC, carriage of mixed materials to work to site spreading in uniform layers with motor grade on perparel surface and compacting with vibnatory power miller to achive the desried density complete as per std specification |
| 2 | Providing and Laying Wet Mix Mecadam Using 0.396m3 of 45-22.40mm Graded metal, 0.528m3 of 22.40-2.36 mm graded metal and 0.396m3 2.36 and below size graded metal premixing with water to a densemass on a prepared subgrade / base to temple in uniform 15cm Consolidated thickness and consolidation with Vibratory roller of 8 to 10 tonne capacity in stages to proper grade and camber rolling with protecting edges, etc completing with MORTH specification Clause 406. |
| 3 | Providing and laying Prime Coat over WBM/ WMM surface using 7 Kg of EmulsionBitumen (SS1) per 10 sqm for preparatory to another bituminous construction over it, including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as perClause 502 of MORTH Rev-5 |
| 4 | Providing and laying tack coat of 2.5 kgs/10 sqm over the Prime surface treated with binder using 2.5 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev V Specifications |
| 5 | Providing and laying 50mm consolidated thick Dense Bituminous Macadam using 0.24 cum of 26.50-13.20mm, 0..25cum of 13.20-2.36mm and 0.23cum of 2.36mm & below and with 53.20 Kgs of VG30/VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site,heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to work site, spreading themix to uniform thickness of 50mm with paver to the specified grades and cross sections and compactedby Vibratory / Pneumatic Roller to the required density etc., including labour for attending to paver at site etc., including hire charges and fuel charges for 20-30 t CMP with bitumen boiler, tipper trucks,Paver Finisher / 9m paver finisher, Vibratory / Pneumatic rollers and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 505 MORTH Rev-5 |
| 6 | Providing and layingBituminous Concrete to 30mm thick using 0.13 cum of 19.00 - 9.50mm graded metal 0.17 cum of 9.50-2.36mm graded metal and 0.26 cum of 2.36mm & below metal by adding theshredded plastic 10% of Bitumen quantity 4.02Kg (50.30x10%=4.02Kg) shredded plastic waste over the aggregate heated to 170 degree calcious in the central hot mix palnt mixed well with 46.28 Kgs of hot bitumen VG30 Bitumen (160 degree calcious) 60/70 grade for premixing per 10 sqm to lay 30mm compacted thick of bituminious concrete including the cost of materials and conveyance of all materials to CMP site, heating the bitumen and agregates to the required temperature and mixing the minimum required Temperaturein central hot mix plant 20-30 tonnes capacityconveying the mix by tipper trucks to paver site, spreading the mix in required temperature of unform thickness of 30 mm with mechanical paver to the specified grades and cross section and consolidated by 80-100 KN vibratory Roller/Pneumatic roller to there quired density etc, including labour for loading bitumenin to bitumen tank and metal to feeder unit, labour for attending to paver site etc., including hire charges and fuel charges for 20-30 TCMP with bitumen boiler, tipper trucks, paver finisher/9m paver finisher, vibratory / Pneumatic roller and all other tools and palnts required, including all other incidental charges etc, complete as per specification using CMP clause 507 of NORTH REV-5 Specification |
| 7 | Providing and laying of of hot applied thermoplastic compound 2.50mm thick including reflecting glass beadsat 250 GSM per Sq.m area thickness of 2.50mm is exclusive of surface applied glass beads as per IRC 35. The finished surface to be level, uniform and free form streaks and holes etc, complete (as morth & H Specification No.803) |
| 8 | Manufacturing supply and fixing of retro reflective road name sign board single arrow of size 0.75mx0.40m made out of wide angle cube corner micro prosmatic grade sheeting conforming to IRC-67: 2010 & Type XI standards of ASTM D4956 - 09 specfication and fixed over 2mm thick aluminium aheet & back support frame of 25x25x3mm MS angle frame supported by 32NB stainless steel pipe all around by means of properly designed foundation with MIS grade cement concrete 30 cm x 30 cm x 45 cm etc complete. The informaction message shall be made out of cut letters in bule colour transparent overlay film as per IPC 67-2010 Guidelines, 7 years warranty for retro reflective sheeting from the orginal sheeting manufacture & a certified copy of three years outdoor exposure report from an independent test lab for the product offered shall be submitted by the contractor |
AI Tender Summary
Tender Timeline
Jun 20, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJul 04, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 05, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender