Repairs Hand Pumps Repairs To Hand Pumps And Power Pumps In Kirkee Cantonment Area ( Ii Call )
Tender Value
Ref. Documents
Estimated cost
Bid Submission
07 Jul 2022
0 days left
EMD
10000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kirkee → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repairs Hand Pumps Repairs To Hand Pumps And Power Pumps In Kirkee Cantonment Area ( Ii Call )
BOQ
| Sl. No. | Item Description |
| 1 | HAND PUMPS :Removing & lowering the Hand Pumps with minor reapers to suction pipe, delivery pipe, any depth complete(Labour only, Below G.L.Work) |
| 2 | Repairing to Hand Pumpby Removing assembling & fixing etc. complete.(above G.L,Labour Only) |
| 3 | Fixing of hand pumpstandwith PCC foundation /otta complete |
| 4 | Aluminum painting to hand pump complete. |
| 5 | Hand pump Handle ( supply only) |
| 6 | Hand pump Connecting Rod 10\"-00\"Long ( supply only) |
| 7 | Hand pump C.I.Non Return Valve up to1-1/4\" ( supply only) |
| 8 | Hand pump C.I.Non Return Valve1-1/2\"& 2\" ( supply only) |
| 9 | Hand pump Chain with nut bolt ( supply only) |
| 10 | Hand pump Shaft With Nut Bolt ( supply only) |
| 11 | Hand pump Bearing ( supply only) |
| 12 | Hand pump MS Coverwith nut bolt Only ( supply only) |
| 13 | Hand pump Welding for assembling above GL ( supply only) |
| 14 | Hand pump Suction Cylinder Packing Complete ( supply only) |
| 15 | Hand pump Complete Cylinder ( supply only) |
| 16 | S/F M.S clamp pairs with nut bolts ( supply only) |
| 17 | S/F Boring cap ( supply only) |
| 18 | HDPF pipe connector 1\" to 2\" dia GIwith clamps ( supply only) |
| 19 | S/L/F UPVC pipe with necessary fittings1\" dia |
| 20 | Dissembling & Assembling , Mono Block, subermersible monoblock assembling, Including replacement of bearings fan, Bushes, Repair, to impeller Nut bolts any required pare, transportation etc.i)up to3 HP |
| 21 | Dissembling & Assembling , Mono Block, subermersible monoblock assembling, Including replacement of bearings fan, Bushes, Repair, to impeller Nut bolts any required pare, transportation etc ii) 5 HP to 7.5 hp |
| 22 | Removing , Fixing, Rewinding Monoblock/subermersible monoblock with Necessary electrical Connection etc.i)up to3 HP |
| 23 | Removing , Fixing, Rewinding Monoblock/subermersible monoblock with Necessary electrical Connection etc ii) 5 HP to 7.5 hp |
| 24 | Repairingof submersible pump with bearing/ water seal/ gasket/trust plate/ impeller, mesh painting, nut bolt etc complete .up to 2.0 HP. |
| 25 | Repairingof submersible pump with bearing/ water seal/ gasket/trust plate/ impeller, mesh painting, nut bolt etc complete. up to 5 HP. |
| 26 | Rewinding ofbore well submersible pumpetc complete up to 2.0 HP. |
| 27 | Rewinding ofbore well submersible pumpetc complete up to 5 HP. |
| 28 | Repairs electrical wireing from pump to panel board/ repairs to panel etc. complete |
| 29 | Supplying / lowering / jointingISI HDPF 6kg pressure pipe with all fitting, testing forpump etc complete including fitting & testing etc complete., 2\" |
| 30 | flushing of blocked borewell 200 ft. |
| 31 | S/F Electrical pump panel box with dry run facility, over load , healthy ,on, volt meter, amp meter meter,starter,indicator , on /off timer setting all units inms panel powder coatedbox etc testing complete .i) single phase |
| 32 | S/F Electrical pump controlpanel box with dry run facility, volt meter, ampmeter meter,starter, fuses/Mcb, indicator , single phase preventer on /off timer setting all units inms panel powder coatedbox testing complete. ii) three phase |
| 33 | S/F 1.0to 3HP CRI/ LAXM (LADA)/KSB MAKE SINGLE /THREE PHASE subermersible bore well pump, as per company design, cable jointing, all connection fittings complete(4\" dia bore well) as directed. |
| 34 | S/F 1to 2HP CRI/ LAXMI/KSB MAKE SINGLE /THREE PHASEcentrifugal pump, as per company design, cable jointing complete as directed. |
| 35 | Drilling of bore well perfectly vertical of 150 mm dia. (6\") including shifting, transportation of machinery at the location given above. ( In soil & murum 200/215 mmdiavarying as per formation & inhard rock 150 mm dia boringvarying in hard rock formation) including shifting , transportation of machinery at the location given above. |
| 36 | Providing / lowering150 mm dia MS boringcasingpipe as per ISI rule includingtransportation cutting with grouting the same in cement slung , cap completed.(4 kg/sq cm) |
AI Tender Summary
Tender Timeline
Jun 18, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJul 07, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 09, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender