Construction Of Wazu Khana At Jamia Masjid Malik Pora Verinag By Way Of Pf Of Sanitary Fittings And Other Allied Works
Tender Value
10.46 Lakhs
Estimated cost
Bid Submission
24 Jun 2022
0 days left
EMD
20920
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
verinag → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Wazu Khana At Jamia Masjid Malik Pora Verinag By Way Of Pf Of Sanitary Fittings And Other Allied Works
BOQ
| Sl. No. | Item Description |
| 1 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length: First class kail wood. |
| 2 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.)\"For fixed portion\" Powder coated aluminum (minimum thickness of powder coated 50 microns) |
| 3 | P/F Ceramic glazed(floor tiles) floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in color such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1:4 (1 cement: 4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete. |
| 4 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 5 | P/F glazed shutters for doors, windows & clerestory windows using 10 Kg/sqm (4mm thick) float glass panes including ISI marked M.S. pressed butt hinges bright finished of required sizewith necessary screws.(Firstclass kail wood). 35mm |
| 6 | P/F of khatambandi in ceilings of approved pattern / design incld. cost of screws / nails & sca-folding charges incld. cost of rough ceiling of 12mm thick ply wood & supportingframe work 50x50mm not less than 600mm c/c bothways, ( First class Budloo wood) includingproviding & applingof French spirit polishing (two or more coats) complete in all respects. |
| 7 | P/F of 5 mm thick clear float glass panes for glazing of doors and windows etc. incld. cost of kail wood beading of required size, cuttings and wastage all complete. |
| 8 | P/F of M.S. pipe light grade weight 9\" or more for Hamam including cutting of walls and making the walls good with all necessary supports as required complete in all respects. |
| 9 | P/F of water Heater Gyser 50 litres capacity (Venus / Recold make) inclulding cost of all necessary fittings etc. complete. |
| 10 | P/F of Exuast fan of standard make like USHA or Crompton including all electric arrangements complete.(12\" size) |
| 11 | P/F G.I pipes complete with G.I fittings & clamps incld. cutting & making good the walls etc. concealed pipe incld. painting with anti corrosive bitumastic paint, cutting chases & making good the wall:- |
| 12 | a. (15mm dia nominal bore) |
| 13 | b. (20mm dia nominal bore) |
| 14 | c. (25mm dia nominal bore) |
| 15 | Brick work with common burnt clay F.P.S (non-modular ) bricks class designation 75 in foundation & plinth including superstructure above plinth level upto floor V level incement mortar 1:6 (1 cement : 6 course sand) including cost of scaffolding charges and all carriages / head load upto site of work complete. |
| 16 | 12 mm cement plaster finished with a floating coat of neat cement of mix 1:4 ( 1 cement : 4 fine sand) including all carriages / head load upto site of work complete. |
| 17 | P/applying white cement based putty of specifiedthickness of approved brand and manufacture, over plastered wall surface to prepare the surface even and smooth complete. |
| 18 | P/F water closet squatting pan (Indian type W.C. pan) with 100mm sand cast iron P or S trap 10 liter low level PVC flushing cistern (of approved make) with manually controlled device (handle lever) conforming to IS: 7231 with all fittingsand fixtures complete, including cutting and making good the walls and floors wherever required (Long pan pattern white vitreous china W.C, pan of size 580 mm. |
| 19 | P/F C.P. Brass sanitary fittingsof approved quality(jaquar or equivalent make)all complete:- |
| 20 | a) Basin / wall mixer. |
| 21 | b)2 in 1 Bib cock. |
| 22 | c)Health fuset. |
| 23 | d) Angle valve. |
| 24 | e) Bib cock. |
| 25 | f) Connection. |
| 26 | g) Nipple. |
| 27 | P/F of following PVC pipes (Prince/Supreme make)having pressure 4 kg N/cm incld. cutting and making good the walls where ever necessary required all complete.(Including all fittings as required) |
| 28 | a) 100mm dia. |
| 29 | b)75mm dia. |
| 30 | c) 32mm dia. |
| 31 | P/F and installation of water lifting motor (1 -HP) of approved quality including all fittings complete in all respects. |
| 32 | Stone work in plain Ashler ornamental type in superstructure upto floor V level in cement mortar 1:6 (1 cement: 6 course sand) incld. pointing with cement mortar 1:2 (1 white cement :2 stone dust) with an add mixture of pigment matching the stone shade (Devri stones) including extra labour for rectangular pillars and arch portion / moulding on top and including all carriage upto site of work complete.(Fine chiseled dressed) |
| 33 | P/F of ornamental type first class deodar wooden door shutter 40 mm thick double sided hand carved type as required including cost of hinges / screws / hands and french sprit polishing (two or more coats) etc. complete. |
AI Tender Summary
Tender Timeline
Jun 18, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJun 24, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 25, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender