|
| 1 | Civil work |
| 2 | Boring, providing and installing bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring, with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete, including removal of excavated earth with all lifts and leads (Length of pile for payment shall be measured upto bottom of pile cap). ofdia 450 mm. |
| 3 | Supplying, fabricating and placing in position MS liner made of 6 mm thick MS plate for intial length of cast in situ concrete piles including all operation such as straightening, cutting, bending to shape, welding, fabrication, driving, fabricating, driving placing in position applying 2 coats of primer and 2 coats of anti corrosive paint etc. complete as per specification excluding temporary liner if provided depth of line shall be decided by engineer-in-charge as per site condition. |
| 4 | Providing and casting in situ or precast controlled Cement Concrete M-350 for prestressed concrete work in Super structure including centering, shuttering, curing, scaffolding, ramming, vibrating, finishing, lauching or shifting complete.(I) Solid Slab. |
| 5 | Load testing of foundation piles including loading with necessary kentledge or any other suitable method as directed. |
| 6 | Providing and casting in situ controlled cement concrete M- 250 for R.C.C. work in superstructure including centering, shuttering scaffolding, ramming, vibrating curing and finishing complete.(A) T-Beam and Deck slab type of superstructure (I) Deck slab (upto 10 ton). |
| 7 | Providing and laying in position FE 500/500D TMT bar reinforcement including cutting, bending, hooking and tying complete as per detailed drawings for the following.(A) Piers (B) Abutments (C) R.C.C. Returns (upto 10 ton). |
| 8 | Brick work using common burnt clay building bricks having and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B) Conventional (upto 10 ton). |
| 9 | Providing 20 mm thick double coat mala cement plaster on interior brick / concrete work for plastering comprising of base coat of 12 mm thick cement plaster in cement mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel including scaffolding curing etc. complete. |
| 10 | Applyingtwo coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth. |
| 11 | Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete. |
| 12 | Providing upto floor two level precast cement concrete jali or grill 1:2:4 mix (1- Cement : 2- coarse sand : 4-graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia. Mild steel wire including roughening,cleaning, fixing and finishing in cement mortar 1:3 and curing complete. (A) 50mm thick. |
| 13 | Providing and fixing rolling shutters of approved make made of 80 mm wide M.S. laths inter-locked together through their entire length and jointed together at the ends by end locks mounted on specially designed pipe shaft with bracket plates, guide channels and arragements for inside and outside locking with push-pull operation including the cost of hood cover and spring etc. complete.(A) Shutters having width below 3.5 M. |
| 14 | Manufacture, supply & Delivery of submerged Arc welded M.S. Pipe outside coated with best quality bituminious paint having beveled ends plate or coil conforming to IS-3589-2001 or its lates revision/ammendment for following thickness outside diameter at GWSSB stor or site anywhere in GujaratState including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading conveyance to departmental tores, stacking contractors overhead charges & profit and labour cess(1%) etc. complete. (Rate for MS pipe based on the ex. works price or HR coil as Rs. 38900.00 per MT (above 3.15 mm to 10 mm ) & Rs. 39400.00 per MT (above 10 mm ) dtd 6-3-2013). With excise duty. 219.1 mm. |
| 15 | Lowerin, laying & jointing in position to correct line & level M.S. pipe with outer gunniting & inside lining/epoxy painting on pedestal or chairs upon prepared formation or prepared bedding in trenches the rates include conveyance from store to site of work loading, unloading, joint plastering, hydrotesting etc. complete. 4 mm to 7 mm thick. 219.7 mm |
| 16 | Providing, supplying and erecting fabrication work for gantry crane of appropriate size single girder type HOT crane with 5 m lift complete with manually operated chain pulley block long travel rail track moving across girder, break, safety devices etc & tested to 50% over head of capacity 2 Ton. of bharat company make its equivalent as directed by engineer in charge. |
| 17 | Charges for lifting, lowering and fixing of motor pump set centrifugal/submerssible of 40/50/100 H. P. with M.S. pipeline of 200 mm, casingpipe and pipe clamp etc. from intakewell/sump/pond including transportation i.e. from site to workshop & vice versaor shifting to another place & loading, unloadin charges etc. complete but excluding all taxes as directed by Engineer in charge. |
| 18 | Steel work, riveted in built up sections framed work including cutting, hoisting, fixing in position and applying a priming coat of read lead paint. (A) In beams and joists, channels angles Tees, flats, with connecting plates or angle cleats as in main and cross beams. Hip and jack rafters, purlins conneted to common rafters and the like. (upto 10 ton) |
