Annual Maintenance And Repair Of Civil Works At 220 Kv Sub Station Baraut Baghpat- 1 Excavation In Foundation In Ordinary Soil ( Loam Clay Or Sand ) Including Lift Upto 1.5M And Lead Upto 30M And Including Filling, Watering And Ramming Of Excavated Earth Into The Trenches Or Into The Space Between The Building And Sides Of The Foundation Work. ( Csi No. 4.01 ) 2 Clearing Jungle Including Uprooting Of Rank Vegetations, Grass, Bush, Wood, Trees And Saplings Of Girth Upto 30Cm Measured At A Height Of 1.0M Above Ground Level And Removal Of Rubbish Upto A Distance Of 50M Outside The Periphery Of Uppcl Area Cleared. ( Csi No. 4.08 ) 3 Cleaning Of Grass And Removal Of Rubbish Upto A Distance Of 50 Moutside The Uppcl Area Cleaned. ( Csi No.4.09 ) 4 Concrete With 4Cm Gaugestone Ballast, Coarse Sand ( F.M. 1.8 To 2.5 ) & Cement In Proportion Of 12:6:1 In Foundations &Under Floors Including Supply Of All Materials, Labour And Tools And Plants Etc. Required For Proper Completion. ( Csi No. 5.02 ) 5 Cement Concrete With 2Cm Gauge Approved Hard Stone Ballast, Coarse Sand ( F.M. 1.8 To 2.5 ) And Cement In Proportion Of 3:1.5:1Including Supply Of All Materials, Labour, Side Shuttering Ifrequired And T&P Etc. Required For Proper Completion Of Work ( Csi No. 5.21 ) 6 Precast Cement Concrete Door Sills, Chaukhats Boundary Posts, Shelves And Similar Small Work With Cement, Approved Coarse Sand ( F.M. 1.8 To 2.5 ) And 2 Cm Gauge Graded Approved Hard Stone Ballast In The Proportion 1:1.5:3, Excluding Reinforcement But Including Fixig The Same In Position Including Cost Of All Other Material, Labor And T&P . ( Csi No. 5.22 ) 7 First Class Brick Work In 1:4 Cement And Coarse Sand ( F.M.1.8 To 2.5 ) Mortar In Foundation And Plinth Including Supply Of Allmaterials, Labour & T&P Etc. Required For Proper Completion Of Work ( Csi No. 6.03 ) 8 First Class Brick Work In 1:4 Cement And Coarse Sand ( F.M.1.8 To 2.5 ) Mortar In Super Structure Including Supply Of Allmaterials, Labour & T&P Etc. Required For Proper Completion Of Work For Walls Of One Brick Thickness. ( Csi No. 6.03+6.07+6.08 ) 9 Brick Work In Foundation & Plinth With Old Dismantledbricks ( Supplied By Department Free Of Cost ) And Coarse Sand Of F.M. 1.8 To 2.5Mortar In 1:6 Including Supply Of All Other Materials, Labour, Removing Mortar & Cleaning Of Old & Used Bricks, T&P Etc Complete. ( Csi No. 6.18 ) 10 Same As In Item 6.18 Above Butin Super Structure For 230 Mm Thick Wall. ( Csi No. 6.19 ) 11 Removal Of Cement Mortar From Dismantled Bricks And Stacking In Countable Position At Place As Directed By The Engineer In Charge, Including Cost Of All Labour And T&P Required For Proper Completion Of Work. ( Csi No. 6.22 ) 12 S / F Of Indian Sal Wood Frames Of Door, Window, Ventilators, Etc. And Fixing The Same In Proper Position And Alignment Including Simple Moulding And Straight Line Work As Per Direction Of E / I Including Cost Of All Material, Labour And T&P Required For Proper Completion Of Work. 13 Supply And Fixing Of 3.5 Cm Thick Shisham Wood Fully Panel Shutterincluding Supplying And Fixing Of Wooden Cleats, Stoppers And Necessary Screws Including Supply And Fixing The 4Mm Thick Glass Panes With Putty And Brad, ( 0.64Kg Or 21 Oz Per Sqm ) Required For Proper Completion Of Work And As Per Direction Of E / I. 14 S / F Ofmalayshian Sal / Marandi / Chir Wood Frames Of Door, Window, Ventilators, Etc. And Fixing The Same In Proper Position And Alignment Including Simple Moulding And Straight Line Work As Per Direction Of E / I Including Cost Of All Material, Labour And T&P Required For Proper Completion Of Work. 15 Supply And Fixing Galvanised Mosquito Proof Jali ( 16X24 Gauge ) Withm.S. Flat Of 20 X 3 Mm. Size, On Both Sides Screwed Or Welded To Windowor Door Frame. ( Csi No. 9.18 ) 16 S / F Galvanized Mosquitos Proof Heavy Quality Iron Wire Gauge ( 14X24 ) Over Window Frames And Including Supply Of Country Woodbattens 8Cm X 1Cm. And Including Supply And Fixing Of Necessary Screws, All Materials, Labour Andt&P Etc. Required For Proper Complete. ( Csi No. 8.45 ) 17 Supply And Fixing Of 32 Mm Thick Single Leaf Flush Door Shutter ( Boiled Water Resistance, Phenol Maldehide Resin Bonded, Hot Pressed Factory Made ) Commercial Quality To I.S.2202 Part-1 ( 1983 ) Isi Marked Including Fixing Of Wooden Cleats And Stoppers And Including Fixing And Adjustment Of Hinges, Bolts.Locks, Handles, Springs And Other Fittings But Excluding Their Supply Including All Materials, Labour & T&P Etc. Required For Proper Completion Of Work. ( Csi No. 8.57 ) 18 Providing And Fixing In Place A Full Height Storage Cabinet 600 Mm Deep Made With 19 Mm Thick Isi Marked Ply Borad, All Interior Surfaces To Finished With Pasting Of 0.8 Mm Thick Mica And All Exterior Surfaces To Be Finshed With Pasting Of 1 Mm Thick Mica Of Texture And Colour As Approved By Engineer In Charge Including All Labour, T&P, Other Items Like ( But Not Limited To ) Fevicol, Nails Screws, Higes, Sliders, Door Handles, Multipurpose Lock Of Godrej Or Equivalent Rate Etc. Required For Proper Completion Of Works, To Be Measured Interms Of Front Area Only. ( Csi No. 8.64 ) 19 Mild Steel Or Iron Work In Heavy Sizes Such As Trusses Built Upgates, Door Frames, Record, Racks Roof Work Gates Etc. Wrought Torequired Form Including Holes Rivetting Or Welding Where Necessary And Also Fixing In Proper Position And Alignment Including Cost Of All Materials Supplied By Contractor. ( Csi No. 9.01 ) 20 As In Item 9.01 Above But When Steel Is To Be Provided By The Department. ( Csi No. 9.02 ) 21 Tmt / Tor Steel In Plain Work Such As Reinforced Concrete Orreinforced Brick Work ( When Not Included In An Over All Rates ) Wrought To Required Shape As Necessary Including Bending Forproper Completion Of The Work And Including Supply Of Steel Its Wastage, Bend, Hooks And Authorized Overlapping Shall Be Measured. ( Steel Shall Be Arranged By The Contractor ) ( Csi No. 9.03 ) 22 12 Mm Thick Plaster With Cement Mortar Consisting Of One Part Of Cement & Four Part Of Coarse Sand ( 1:4 ) , Minimum Thickness Not To Be Less Then 10 Mm Including Supply Of All Material, Labour And T&P Etc For Proper Completion Of Work. ( Csi No. 11.07 ) 23 Making Drip Coarse ( 25X12 ) Mm In 1:2 Cement And Coarse Sandincluding Supply Of All Materials, Labour And T&P Etc Requiredfor Proper Completion Of Work. ( Csi No. 11.19 ) 24 2.5 Cm Thick 1:2:4 Plain Cement Concrete Floor With Cement, Approved Coarse Sand & 2Cm Graded Approved Stone Ballast Laid In Panels Finished With 3Mm Floating Coat Of Neat Cement Or Cement And Marble Dust In Ratio Of 5:1 As Specified And Removing Any Overlapping Mortar At The Joints Of The Panels If Any And Giving Them A Uniform Finish Including Supply Of All Materials, Labour And T&P Etc, Required For Proper Completion Of The Work. ( Csi No. 12.02 ) 25 4.0 Cm Thick 1:2:4 Plain Cement Concrete Floor With Cement, Approved Coarse Sand & 2Cm Graded Approved Stone Ballast Laid In Panels Finished With 3Mm Floating Coat Of Neat Cement Or Cement And Marble Dust In Ratio Of 5:1 As Specified And Removing Any Overlapping Mortar At The Joints Of The Panels If Any And Giving Them A Uniform Finish Including Supply Of All Materials, Labour And T&P Etc, Required For Proper Completion Of The Work. Without Base Cc. ( Csi No. 12.04 ) 26 Supply And Laying 8 Mm Thickglazed Floor Tiles Of Somany, Johnson Or Equivalent Make, , Laid With1:3 Cement And Approved Coarse Sand Mortar Finished With Whitecement Slurry, Jointing And Polishing Complete, Including Supplyof All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work. ( Csi No. 12.11 ) 27 Providing And Laying Floor Of 8 Mm Thick Vitrifiedtiles In Flooring Or Skirting Of Approved Brand ( Bell, Johnson Or Equi. Make ) Size Of 600X600 Mmof Approved Shade, Colour And Pattern , Laid Over Base Cement Mortar 1:4 Mix Including Finishing The Joints With White Cementmixed With Pigment To Match The Shade Of Tile Including Cost Of All Material, Labour And T&P Required For Proper Completion Of The Work. ( Csi No. 12.18 ) 28 Same As 12.18 Above But For Providing And Fixing 8 Mm Thick Vitrifiedtiles In Flooring Or Skirting With Adhesive Of Approved Quality On Existing Smooth Floor Including Cost Of All Material, Labour And T&P Required For Proper Completion Of The Work. ( Csi No. 12.19 ) 29 Supply Of 80 Mm Thick I Shaped Mechanically Compressed Inter Locking Cement Concrete Paver Block Manufactured By High Pressure & Controlled Vibration Machine Having Plan Dimension 200X ( 160+120 Mm ) With Minimum 5 Mm Thick Toping Of O.P.Cement Mixed With 25% Marble Powder. The Compressive Strength Of Concrete Pavers Blocks Shall Not Be Less Than 30 Mpa & 4.5 Kg / No. Including Cost Of All Material, Labour, T&P Etc. Required For Proper Completion Of Work As Directed By Engineer-In-Charge But Excluding G.S.T. Which Shall Be Paid Extra As Per Rules. ( Csi No.12.23 ) 30 Painting Or Varnishing New Iron Work In Small Areas Or New Woodwork With One Coat Of Ready Mixed Priming Paint And One Coat Ofapproved Superior Quality Ready Mix Paint Luxol Or Equivalentbrand Or Varnish Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work. Paint To Be Used Should Conform To The I.S. 103-1950. ( Csi No. 13.01 ) 31 As In Item 13.01 Above But For Every Coat After First Coat. ( Csi No. 13.02 ) 32 As In Item 13.01 Above But For Every Coat On Previously Paintedold Wood Or Iron Work Including Its Sand Papering, Rubbing Andcleaning As Required, For Proper Completion Of Work. ( Csi No. 13.03 ) 33 Applying Birla Or Equivalent Putty On New Interior Or Exterior Surface Over One Coat Of Water Based Cement Primer Of Ici Or Equivalent Brand For Smoothening And Levelling Of The Surface As Per Requirement And Direction Of Engineer I / C Including Cost Of All Material, Labour, T & P Etc Required For Proper Completion Of Work. ( Csi No. 13.20 ) 34 Applying Birla Putty Or Equivalent Putty On Previousaly Bila Putty Smoothen Surface Over One Cost Of Water Base Cement Primer Of Ici Or Equivalent Brand For Smoothining And Leveling Of The Surface As Per Requirement And Direction Of E / I Including Cost Of All Material , Labour And T&P Required For Proper Completion Of Work. ( Csi No.13.21 ) 35 One Coat Priming & Painting One Coat With Apex Or Equivalent Brand Weather Coat Paint On New Wall Surfaces Including One Coat Of Undercoat Primer Ici Or Equivalent, Including Through Washing With Water Including Cost Of All Materials, Labour, T&P Required For Proper Completion Of Work. ( Csi No. 13.22 ) 36 Same As In Item No 13.22 Above But For Every Coat Of Additional Apex Or Equivalent Brand Weather Coat Paint . ( Csi No. 13.23 ) 37 Same As In Item 13.22 But For Each Coat Ofapex Or Equivalent Brand Weather Coat Paint .On Previously Treated Surface. ( Csi No. 13.24 ) 38 Dismantling Brick Work Or Stone Work In Lime Or Cement Mortar Andincluding Stacking Of Materials As Directed By Theengineer-In-Charge Within A Distance Of 60 Metres. ( Csi No. 15.01 ) 39 Dismantling Reinforced Cement Concrete Or Reinforced Brick Work, Including Stacking Of Dismantled Materials As Directed By Theengineer-Incharge Within A Distance Of 60 Metres. ( Csi No. 15.03 ) 40 Dismantling Cement Concrete Or Brick Or Granolithic Floorsincluding Base Concrete And Including Stacking Of Dismantledmaterials As Directed By The Engineer In-Charge Within A Distanceof 60 Metres. ( Csi No. 15.05 ) 41 Dismantling Doors Or Window Leaves Including Stacking Ofmaterials As Directed By The Engineer I / C Within A Dist. 60 M. ( Csi No. 15.09 ) 42 Dismantaling Doors And Windowschowkhatsincluding Stacking Of Materials As Directed By Engg-In-Charge Within A Distance Of 60 Meters. ( Csi No. 15.10 ) 43 Dismantling Existing Plaster Including Disposal Of Refuse Asdirected By The Engineer-I / C Within A Distance Of 60 M. ( Csi No. 15.11 ) 44 Scrapping Old White Or Colour Wash Or Distemper Including Disposal Of Refuseas Directed By The Engineer-I / C Within A Distance Of 60 M. ( Csi No. 15.12 ) 45 Renewing Door Cleats Including Supply Of All Materials, Labour & T&P Etc. Required For Proper Completion Of The Work. ( Csi No. 20.06 ) 46 Fixing Panes Of Glass With And Including Putty Brads And Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work But Excluding Cost Of Glass. ( Csi No. 20.07 ) 47 Labour For Fixing Door Bolts Or Hinges Or Tower Bolts Or Hasp And Staples Or Handles Etc.To Doors And Window. ( Csi No. 20.10 ) 48 Cleaning Of Septic Tank Including Disposal Of Waste Out Side The Uppcl Area As Per Direction Of The Engineer-In-Charge Including Cost Of All Labour, T&P Etc.Required For Proper Completion Of The Work. ( Csi No. 20.12 ) 49 Same As In Item No.20.12 Above But For Inspection Chamber.. ( Csi No. 20.13 ) 50 Cleaning Of Main Drain Or Width More Than 300 Mm.Including Disposal Of Waste Refuses Sludge Out Side The BoardS Area Including Washing And Cleaning By Clean Water Completely As Per Direction Of The Engineer-In-Charge Including Cost Of All Labour, T&P Etc.Required For Proper Completion Of The Work. ( Csi No. 20.14 ) 51 Same As Above In Item No. 20.14 But For Drain Of Width Less Than 300 Mm. ( Csi No. 20.15 ) 52 Disposal Of Rubbish / Debris Out Side The Uppcl Area As Per Direction Of Er / In- Charge Including Cartage, Labour And Materials, T&P Etc. Required For Proper Completion Of The Work. ( No. Deduction For Voids Shall Be Made ) . ( Csi No. 20.16 ) 53 Supply And Replacing Of Following Chromium Polished Iron Fittings Including Cost Of Nuts, Bolts Etc.Complete. L Drops 16 Mm Dia X 300 Long. 54 Supply And Replacing Of Following Chromium Polished Iron Fittings Including Cost Of Nuts, Bolts Etc.Complete. Tower Bolts 10 Mm Dia X 250 Mm Long. 55 Supply And Replacing Of Following Chromium Polished Iron Fittings Including Cost Of Nuts, Bolts Etc.Complete. Tower Bolts 10 Mm Dia X 100 Mm Long. 56 Supply And Replacing Of Following Chromium Polished Iron Fittings Including Cost Of Nuts, Bolts Etc.Complete.Iron Hinges 100 Mm Size.12 Gauge.Thick 57 Supply And Replacing Of Following Chromium Polished Iron Fittings Including Cost Of Nuts, Bolts Etc.Complete. Iron Door Spring. 58 Supply And Replacing Of Following Chromium Polished Iron Fittings Including Cost Of Nuts, Bolts Etc.Complete. M.S.Handles 100 Mm Size 59 Supply And Replacing Of Following Chromium Polished Iron Fittings Including Cost Of Nuts, Bolts Etc.Complete. M.S. Chain Kunda. 60 Supply And Replacing Of Following Chromium Polished Iron Fittings Including Cost Of Nuts, Bolts Etc.Complete. L-Drop 16 Mm Dia X 200 Mm Long. 61 Leveling And Dressing Of Land By Cuttingfilling And Upto 150 Mm. Depth Complete With All Labour, T&P Etc. Required For Proper Completion Of The Work. ( Csi No. 20.18 ) 62 Cleaning And Opening Of Chocked W.C. / Bath / Kithchen Pipe Line Including Opening And Refixing Of Chamber Cover Including Washing Etc. Complete. ( Analysis Based On Nbo - 11 25.020. ( Csi No. 20.19 ) 63 Cleaning Of Existing Pipe Line Of Different Dia. Ranging From 4 To 2 Dia. Including Digging Trenches And Refilling, Opening Of Pipes, Cleaning Of Pipes, Cutting, Threading, If Required Fixing And Including Making Good The Road, Wall Etc As Directed By The Engineer I / C. ( Csi No. 20.26A ) 64 Cleaning Of Existing Water Pipe Line Of Different Dia Up To 2 Dia Including Digging Trenches And Refilling, Opening And Cleaning Of Pipes, Cutting, Threading, If Required Fixing And Including Making Good The Road And Wall Etc. As Directed By The Engineer In Charge. ( Csi No. 20.26B ) 65 Cleaning Of R.C.C. Over Head Tank Up To Capacity Of One Lac. Liters And Chlorinating With Bleaching Power Mixed To Water As Per Direction Of Engineer - In - Charge Complete. ( Csi No. 20.27 ) 66 Extraction Of Defective Vt Submersible Pumps And Motor With 60 X 90 Column Pipe And Then Lowering Of The Repaired Pump And Motor With Pipe And Testing The Same Including Checking Main Cut-Out Fuse And Operation Of Tube Well For 24 Hours Fo Rits Smooth Working With All Cost Of Materials, Labour And T&P Etc Required For The Proper Completion Of The Work. ( Csi No. 20.28 ) 67 Supply And Mixing Bleaching Powder In Over Head Tank As Required Or As Directed By Engineer - In - Charge. ( Csi No. 20.29 ) 68 Supply And Replacing Of Angle Holder Of Anchor Or Equivalentmake Of Approved Quality Including All Materials, Labour And T&Petc. 69 Supply And Replacing Of 6 Amp. Piano Tyre Switch Of Anchor Orequivalent Make Of Approved Quality Including All Materials, Labour And T&P Etc. 70 Supply And Replacing Of 6 Amp. Piano Tyre Socket Of AnchorEquivalent Make Of Approved Quality Including All Materials, Labour And T&P Etc. 71 Supply And Replacing Of 16 Amp.Piano Type Switch Of Anchor Orequivalent Make Of Approved Quality Including All Materials, Albour And T&P Etc. 72 Supply And Replacing Of 16 Amp.Piano Type Socket Of Anchor Orequivalent Make Of Approved Quality Including All Materials, Labour And T&P Etc. 73 Supply And Laying 1.5Sq.Mm Gauge Copper Wire Of Plaza Orequivalent Make Of Approved Quality Including Connecting Withexisting Wiring In Existingp.V.C.Pipe. Including Allmaterials, Labour And T&P Complete. 74 Supply And Laying 2.5Sq.Mm Gauge Copper Wire Of Plaza Orequivalent Make Of Approved Quality Including Connecting Withexisting Wiring In Existingp.V.C.Pipe. Including Allmaterials, Labour And T&P Complete. 75 Supply And Laying 4.0Sq.Mm Gauge Copper Wire Of Plaza Orequivalent Make Of Approved Quality Including Connecting Withexisting Wiring In Existingp.V.C.Pipe. Including Allmaterials, Labour And T&P Complete. 76 Supply And Laying 6.0Sq.Mm Gauge Copper Wire Of Plaza Orequivalent Make Of Approved Quality Including Connecting Withexisting Wiring In Existingp.V.C.Pipe. Including Allmaterials, Labour And T&P Complete. 77 Labour For Fixing Of Electrical Fittings Such As Switches / Plug / Socket / Holder / Cut Out / Ceilingrose / Wooden Board Etc.Complete. 78 Rewinding Of Burnt Ceiling Fan With Approved Copper Wire Including Cost Of All Materials, Labour And T&P Etc. Complete ( Burnt Wirewill Not Be Taken Back. ) 79 Supply And Replacing Of Burnt And Damaged Condenser Of Ceilingfan Of Approved Quality Including All Materials, Labour And T&Petc. 80 Taking Off The Defective Ceiling Fan From Position & Re Hanging After Receiving The Repaired Fan And Proper Connection Etc. 81 Greasing Of Ceiling Fan After Cleaning The Bearing And Shaft Withoil / Petrol And Its Testing. 82 Attending To Petty Maintenance Service Like Plumbingservice, Welder Service, Mansion Service And Carpenter Servicerequired As Below. Job Attending By One No. Plumber / Welder / Mason / Carpenter With Oneno. Helper Per Hour Or Part Of An Hour. 83 Supply And Sprinkling Of Lime In All Drains Of Colony And Waterlogged Area Including Cost Of All Labour, Materials, And T&P Etc, As Required For Proper Completion Of The Work. 84 Cleaning And Sweeping Of Roof Of Residence As And When Requiredincluding Uprooting Of Rank Vegetation And Disposal Of Thegarbage Upto 50 M. 85 Providing And Fixing 15 Mm Dia B-Class Jindal, Jtc, Isi Marked G.I. Pipes Complete With Special Such As Bend, Tee, Socket, Cross, Clamp Etc Earth Work Including Filling The Trenches Etc Required For Proper Completion Of The Work. The Rate Also Includes Concealed Gi Fitting Where Required, Cutting And Making Good The Walls Etc And All Materials, Labour And T&P Complete. ( Csi No. 26.01 ( A ) ) 86 Providing And Fixing 20 Mm Dia B-Class Jindal, Jtc, Isi Marked G.I. Pipes Complete With Special Such As Bend, Tee, Socket, Cross, Clamp Etc Earth Work Including Filling The Trenches Etc Required For Proper Completion Of The Work. The Rate Also Includes Concealed Gi Fitting Where Required, Cutting And Making Good The Walls Etc And All Materials, Labour And T&P Complete. ( Csi No. 26.01 ( B ) ) 87 Providing And Fixing 25 Mm Dia B-Class Jindal, Jtc, Isi Marked G.I. Pipes Complete With Special Such As Bend, Tee, Socket, Cross, Clamp Etc Earth Work Including Filling The Trenches Etc Required For Proper Completion Of The Work. The Rate Also Includes Concealed Gi Fitting Where Required, Cutting And Making Good The Walls Etc And All Materials, Labour And T&P Complete. ( Csi No. 26.01 ( C ) ) 88 Providing And Fixing 15 Mm Dia Jindal, Jtc, Isi Marked G.I. Pipes Complete With Special Such As Bend, Tee, Socket, Cross, Clamp Etc Earth Work Including Filling The Trenches Etc Required For Proper Completion Of The Work. The Rate Also Includes External Gi Fitting Where Required, Cutting And Making Good The Walls Etc And All Materials, Labour And T&P Complete. ( Csi No. 26.02 ) 89 Providing And Fixing 20 Mm Dia Jindal, Jtc, Isi Marked G.I. Pipes Complete With Special Such As Bend, Tee, Socket, Cross, Clamp Etc Earth Work Including Filling The Trenches Etc Required For Proper Completion Of The Work. The Rate Also Includes External Gi Fitting Where Required, Cutting And Making Good The Walls Etc And All Materials, Labour And T&P Complete. ( Csi No. 26.02 ) 90 Providing And Fixing 25 Mm Dia Jindal, Jtc, Isi Marked G.I. Pipes Complete With Special Such As Bend, Tee, Socket, Cross, Clamp Etc Earth Work Including Filling The Trenches Etc Required For Proper Completion Of The Work. The Rate Also Includes External Gi Fitting Where Required, Cutting And Making Good The Walls Etc And All Materials, Labour And T&P Complete. ( Csi No. 26.02 ) 91 Providing And Fixing 40 Mm Dia Jindal, Jtc, Isi Marked G.I. Pipes Complete With Special Such As Bend, Tee, Socket, Cross, Clamp Etc Earth Work Including Filling The Trenches Etc Required For Proper Completion Of The Work. The Rate Also Includes External Gi Fitting Where Required, Cutting And Making Good The Walls Etc And All Materials, Labour And T&P Complete. ( Csi No. 26.02 ) 92 Providing And Fixing 50 Mm Dia Jindal, Jtc, Isi Marked G.I. Pipes Complete With Special Such As Bend, Tee, Socket, Cross, Clamp Etc Earth Work Including Filling The Trenches Etc Required For Proper Completion Of The Work. The Rate Also Includes External Gi Fitting Where Required, Cutting And Making Good The Walls Etc And All Materials, Labour And T&P Complete. ( Csi No. 26.02 ) 93 Making Water Connection Of Gi Pipe Line With Gi Mains ( 25 Mm To 100 Mm ) Dia. By Providing And Fixing Ferrule ( 25 Mm Dia ) Gi Union And Nipple Including Cutting And Threading The Pipe, Inspection, Testing, Cutting And Making Good The Road, Executing Bond With Nagar Maha Palika, Fixing Of Pipe Line Upto The Points Near The Building Complete Work Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of Work. ( Csi No. 26.03 ) 94 Providing And Fixing Full Way 15Mm Dia G.M. Gate Valvewith Wheel, Isi Mark Heavy Quality Including Supply Of All Materials, Labour And T&P Required For Proper Completion Of Work. ( Csi No. 26.04 ) 95 Gm Full Way Gate Valve 20 Mm Dia. 96 Gm Full Way Gate Valve 25 Mm Dia. 97 Gm Full Way Gate Valve 40 Mm Dia. 98 Gm Full Way Gate Valve 50 Mm Dia. 99 Providing And Fixing Pvc Ball Float Valve 15 Mm Dia. With Brass & Union Complete, Isi Mark Heavy Quality Including Supply Of All Materials, Labour And T&P Required For Proper Completion Of Work. ( Csi No. 26.06 ) 100 Pvc Ball Float Valve 20 Mm Dia. With Brass & Union Complete 101 Providing And Fixing Pvc Connection Pipe, 300X15 With 2 Brass Units Isi Mark Heavy Quality Including Supply Of All Materials, Labour And T&P Required For Proper Completion Of Work. ( Csi No. 26.09 ) 102 P / F Gi Unions Nominal Bore 15 Mm, Isi Mark Heavy Quality Including Supply Of All Materials, Labour And T&P Required For Proper Completion Of Work. ( Csi No. 26.10 ) 103 Gi Unions 20 Mm Nominal Bore 104 Gi Unions 25 Mm Nominal Bore 105 Gi Unions 40 Mm Nominal Bore 106 Gi Unions 50 Mm Nominal Bore 107 Supply And Fixing Of Syntex Or Equivalent Make Water Storage Tank Including All Materials, Labours, T&P Etc Required For Proper Completion Of Work. ( Csi No. 26.12 ) 108 P / Fbrass Bib Cock, 15 Mm Dia ( 400 Gsm ) Isi Mark Heavy Quality Including Supply Of All Materials, Labour And T&P Required For Proper Completion Of Work. ( Csi No. 26.13 ) 109 Brass Bib Cock 15 Mm Dia. 200 Gms ( L & K And Equi. ) 110 Supply And Fixing Of 15 Mm Dia Ci / Pvc Bib Cock Including Replacing Of Old Bibcock Complete. 111 P / F Brass Stop Cock, 15 Mm Dia Isi Mark Heavy Quality Including Supply Of All Materials, Labour And T&P Required For Proper Completion Of Work. ( Csi No. 26.14 ) 112 Brass Stop Cock 20 Mm Dia. 113 P / F 15 Mm Dia Brass Wheel Valve, Isi Mark Heavy Quality Including Supply Of All Materials, Labour And T&P Required For Proper Completion Of Work. ( Csi No. 26.15 A ) 114 P / F 25 Mm Dia Brass Wheel Valve, Isi Mark Heavy Quality Including Supply Of All Materials, Labour And T&P Required For Proper Completion Of Work. ( Csi No. 26.15 C ) 115 Providing And Fixing Cp Brass Bib Cock15 Mm Dia. Heavy Quality ( 400Gm ) ( L & K And Equi. ) Fittings, Isi Mark Heavy Quality Including Supply Of All Materials, Labour And T&P Required For Proper Completion Of Work. ( Csi No. 26.16 ) 116 Cp Brassstop Cock 15 Mm Dia. Heavy Quality ( 400Gm ) ( L & K And Equi. ) 117 Cp Brass Bib Cock 15 Mm Dia. Heavy Quality ( 200Gm ) ( L & K And Equi. ) 118 Cp Brass Shower Heavy Quality ( > 225 Gms ) 119 Cp Brass Wash Basin Mixer Heavy Quality ( L & K And Equi. ) 120 Cp Brass Angle Valve Heavy Quality ( L&K Or Equi. ) 121 Cp Brass Piller Cock Heavy Quality ( L&K Or Equi. ) 122 Providing And Fixing Of 110 Mm Dia Pvc Pipe 6 Kg / Sq.Cm Forwith Special Such As Tee, Bend, Socket, Elbow Etc Including Supply Of All Labour, Material, T & P Etc Complete Required For Proper Completion Of Work. ( Csi No. 26.17 ) 123 Providing And Fixing Of 110 Mm Dia Pvc Pipe 4 Kg / Sq.Cm Forwith Special Such As Tee, Bend, Socket, Elbow Etc Including Supply Of All Labour, Material, T & P Etc Complete Required For Proper Completion Of Work. ( Csi No. 26.18 ) 124 Providing And Fixing First Quality White Glazed Orissa Pattern W.C.Pan Hindustan, Cera Make. Size 580 Mm. ( Hindustan, Cera Make ) With Out P Trapincluding Supply Of All Materials, Labour And T&P Etc.Complete. ( Csi No. 27.01 ) 125 As In Item No. 27.01 But Of European Type. ( Csi No. 27.02 ) 126 Providing And Fixing Plastic Seat Covercomplete With Plastic Lid For European Type Wc Isi Markedincluding Supply Of All Materials, Labour And T&P Etc.Complete. ( Csi No. 27.04 ) 127 Providing And Fixing Flat Back 465 Mm.X 355 Mm X 265 Mm. Size Lipped Front Urinal Basin Of White Glazed Earthern Ware First Quality ( Hindutan, Neycer Make ) I.S.I. Marked Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work. ( Csi No. 27.05 ) 128 Providing And Fixing 550X400 Mm Wash Hand Basin Of White Glazed Earthern Ware First Quality I.S.I. Marked ( Hindustan, Neycer / Cera Make ) Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work. ( Csi No. 27.08 ) 129 Providing And Fixing 10 Litres Low Level Pvc Flushing Cistern, Complete With All Fittings Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work. ( Csi No. 27.12 ) 130 Providing And Fixing In Position 32 Mm. Dia P.V.C. Flush Pipe. For W.C. With Unions, Bends Etc. Including Supply Of All Materials, Labour And T&P Etc.Required For Proper Completion Of The Work. ( Csi No. 27.13 ) 131 Providing And Fixing In Position 32 Mm. Dia P.V.C.Waste Pipe For Wash Basin. Including Supply Of All Materials, Labour And T&P Etc.Required For Proper Completion Of The Work. ( Csi No. 27.14 ) 132 Providing And Fixing 600 Mm X 450 Mm Beveled Edge Mirror Of Atul, Kiran Makeglass With Indian Polish 6.50 Mm Thick Complete With Back Of 600 Mm X 450 Mm X 6 Mm Hard Board Sheet Fixed To Wooden Cieats With C.P. Brass Screws And Washers Including Supply Of All Materials, Labour And T&P Etc.Required For Proper Completion Of The Work. ( Csi No. 27.15 ) 133 Providing And Fixing 750 Mm X 20 Mm Size C.P. Brass Towel Rail Of Approved Qualityincluding Bracketsincluding Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work And Cutting And Making Good The Wall Plaster Etc. Required For Work. ( Csi No. 27.16 ) 134 Supply And Fixing Cp Nahani Trap India Make Of Heavy Approved Quality Complete With Ci Grating, Includingsupply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work. ( Csi No. 27.21A ) 135 Asabove But For 100 Mm.Pvc Trap. 136 Providing And Fixing 100 Mm Dia White Glazed P Or S Trap Including Cement Concrete And All Materials, Labour Cartage T&P Etc.Required For Proper Completion Of The Work. ( For W.C. ) ( Csi No. 27.23 ) 137 Providing And Fixing 100 Mm Dia Pvc P Or S Trap Including Cement Concrete And All Materials, Labour Cartage T&P Etc.Required For Proper Completion Of The Work. ( For W.C. ) ( Csi No. 27.24 ) 138 Providing And Fixing Ci Grating 100 Mm Dia Includingall Materials, Labour Cartage T&P Etc.Required For Proper Completion Of The Work. ( Csi No. 27.25 ) 139 Providing And Fixing Stainless Steel Sink 610X450x200 Mm Heavy Quality ( Isi Marked ) Includingall Materials, Labour Cartage T&P Etc.Required For Proper Completion Of The Work. ( Csi No. 27.26 ) 140 Providing And Laying Swr, Pvc ( Finolex Or Equivalent ) Pipe Including Cost Of Excavation, C.C Etc Including Its Jointing And Connection, All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work. ( C ) 110 Mm Dia. ( Csi No. 27.29 ) 141 Providing And Fixing Swr, Pvc ( Finolex Or Equivalent ) Bends Including Cost Of All Materials, Labour And T&P Etcrequired For Proper Completion Of The Work. ( Csi No. 27.30 ) ( C ) 110 Mm Dia. 142 Providing And Fixing Swr, Pvc ( Finolex Or Equivalent ) Trap Including Cost Of All Materials, Labour And T&P Etcrequired For Proper Completion Of The Work. ( Csi No. 27.31 ) ( C ) 110 Mm Dia. 143 Providing And Fixing Swr, Pvc ( Finolex Or Equivalent ) Socket Including Cost Of All Materials, Labour And T&P Etcrequired For Proper Completion Of The Work. ( Csi No. 27.32 ) ( C ) 110 Mm Dia. 144 Minor Repair Of Wood Work Such As Windows, Door, Almirah Shutter & Frame Work Of Various Residences / Offices. ( One Carpenter + One Helper To Be Engaged In Full Working Day. ) 145 Minor Repair Of Water Supply Line Leakages In Various Residence / Offices. ( One Plumber + One Helper Need To Be Engaged In Full Working Day. ) 146 Attending Electrical Faultin Various Residences / Offices. ( One Electrician+ One Helper To Be Engaged In Full Working Day. ) 147 Wiring Point For Light With 1.5 Sq. Mm Frpvc Insulated Multistrand Single Core Copper Conductor Cable In Pvc Conduit Pipe Concealed In The Wall, Complete With 14 Swg Copper Earth Continuity Wire, Modular Type Switch And Ceiling Rose / Angle / Batten Holder On 3Mm Thick Phenolic Laminated Backelite Sheet Etc, Complete In All Respects, As Directed, Including Maching Colour Wash. 148 Wiring Point For Fan / Fresh Air Fan With 1.5 Sq. Mm Frpvc Insulated Multistrand Single Core Copper Conductor Cable In Pvc Conduit Pipe Concealed In The Wall, Complete With 14 Swg Copper Earth Continuity Wire, Modulartype Switch And Ceiling Rose / Angle / Batten Holder On 3Mm Thick Phenolic Laminated Backelite Sheet Etc, Complete In All Respects, As Directed, Including Maching Colour Wash. 149 Supply And Fixing And Concealing Of 25 Mm Dia. 2Mm Thick Pvc Conduit Pipe With Isi Mark Embossed And With Pvc Accessories Confirming To Is No. 3419 For Drawing Wires Duly Sealed At Joints With Original Resin / Adhesive To Make The Complete Piping Rigid, Plastering With Cement Sand Mortar Finished To The Level With Matching Colour Wash Including Cost Of All Material Labour And T&P Etc Required For Proper Completion Of The Work As Per Directions And To The Satisfaction Of Engineer In Charge. 150 S / F Of 6 / 10 / 16 / 20 / 25 / 32 Amp. Sp Mcb ( 10Ka ) ( Legrand Lexic ) 151 Applying Two Coat Of Dr. Fixit Pidicrete Urp With Cement Slurry Of One Parts Of Dr. Fixit Pidicrete Urp ( Covering Area Of Urp- 2.00 To 2.2 Sqm / Kg ) And 1.5 Parts Of Cement On Horizontal And Vertical Damp Surface. Before Application, Clean The Surface With Wire Brush Or Scrubber To Remove Hidden Dirt, Loose Particles Laintance And Dust Degrease The Surface By Using Suitable Solvent. Throughly Saturated The Surface With Portable Water Should Not Be Oceumnlated At Any Place As Per Direction E / I Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of Work
