Military Engineer Services-MES has published Repair To Flooring Bathroom And Allied Works In Md Accn In The Area Of Age B / R-Ii Under Ge ( West ) Jabalpur. Submission Date for this Tender is 26-07-2022. Flooring Work Tenders in jabalpur Madhya Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 08-Jul-2022 | Corrigendum | Date | 19-07-2022 |
| 2 | 19-Jul-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 26-07-2022 |
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 2 | M&L forBrick work using old size bricks with sub class "B" bricks straightor curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed. |
| 3 | Ditto all as per above item but except brick |
| 4 | Taking down cement plaster or cement lime plaster or wall tiles of any description on bricks or stone walls etc including raking out joints hacking for key scrubbing down with water etc |
| 5 | M&L for 15mm thickplasterin CM 1:4 on brick wall finished even & smooth w/o using extra cement in patchesall as specified and directed by Engr-in-charge. |
| 6 | M & L forrendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified. |
| 7 | M&L for 5mm thickplasterin CM 1:4 on ceiling finished even & smooth w/o using extra cement in patchesall as specified and directed by Engr-in-charge. |
| 8 | M&L for preparation of new or priously untreated wall surfaces applying two coats of cement based paint over a coat of cemet primer etc allcomplete. |
| 9 | M&L for preparation of new or priously untreated wall surfaces applying two coats of oil bound distemper over a coat chalk whitening etc all complete. |
| 10 | M&L for preparation of new or priously untreated ceiling surfaces applying three coats of white washcomplete. |
| 11 | Easing of door shutters for easy closing / opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed by Engr-in-charge. |
| 12 | Easing of window shutters, kitchen cupboard shutters, show case shutter drawers incl fixing of screws adjusting handles, knobs tightening piano hinges incl misc small adjustments complete all as specified and directed by Engr-in-charge. |
| 13 | S&F in repair stainless steel chromium plated fancy type curtain rod with bracket holders for curtain rod 20 mm dia and fixed with screws to pelmet boxes complete all as specified and directed by Engr-in-charge. |
| 14 | S&F in repair brass chromium plated tubular towel rail 20mm dia "D" type 60cm long between flanges all as specified and directed by Engr-in-charge. |
| 15 | S&F in repair 18 mm Factory Made Solid PVC Mouldedfor cupboard shutters shelves ,kitchen cabinate etc all as specified and directed by EIC |
| 16 | S&F in repairHandles of senso (as per 3D designs) 150 mminclduding all connection fitting as complete all as specified and directed and approved by GE. |
| 17 | S&F in repair Europa cupboard locks as complete all as specified and directed. |
| 18 | S&F in repair 30 mm wide Continuous (piano) hinges, mild steel, bright finish or electrogalvanised |
| 19 | S&F in repair mild steel cold rolled medium weight butt hinges 100mm size fixed screws to wooden frames or with welding to steel frames all as specified and directed by Engr-in-charge. |
| 20 | Ditto all asper above item but butt hinges 75mm size all as specified and directed by Engr-in-charge. |
| 21 | S&F in repair mild steel helical door spring 300mm ordinary rat tail type incl roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed by Engr-in-charge. |
| 22 | S&F in repair mild steel sliding door bolts plate type stove enameled black with bright bolt not less than 12mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, length of bolt 250mm complete all as specified and directed by Engr-in-charge. |
| 23 | S&F in repair aluminium alloy anodized sliding door bolt with hasp,staples (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast aluminium alloy length of bolt 250mm complete all as specified and directed by Engr-in-charge. |
| 24 | S&F in repair stainless steelwire cloth 0.36 mm nominaldia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples beads or in steel window complete all as specified and directed by Engr-in-charge. |
| 25 | S&F in repair aluminium anodized barrel tower bolts of extruded section length of bolt 200mm complete all as specified and directed by Engr-in-charge. |
| 26 | Ditto all as per above item but length of tower bolt 150 mm all as directed by Engr-in-Charge |
| 27 | S&F in repair mild steel barrel tower bolts stove enameled with bright bolt length of bolt 200mm –ISI marked all as specified. |
| 28 | Ditto all as per above item but length of bolt 150mm all as directed by Engr-in-Charge |
| 29 | S&F in repairs extruded aluminium alloy handles fabricated type 150mm size complete all as directed by Engr-in-Charge |
| 30 | Ditto all as per above item but100mm size all as directed by Engr-in-Charge |
| 31 | S&F in repair mild steel pressed handles oval type stove enameled black of size 125mmcomplete all as directed by Engr-in-Charge. |
| 32 | S&F in repair looking mirror 600 x 450mm bevelled edges of selected quality glass mounted on 5 mm thick PVC Sheet with PVC frame around and fixed to wooden plugs with CP brass screws all as directed by Engr-in-charge. |
| 33 | S&F in repair3mm thick sheet glass ordinary quality and galzing with oil putty or wooden beads in squares of any size complete all as specified and directed by Engr-in-charge. |
| 34 | S&Fin repairs3mm thickfigured glass pin head type and glazing with oil putty or wooden beads in squares n exc 0.50 Sqmtr each pane complete all as specified and directed by Engr-in-charge. |
| 35 | S&F in repair 15mm bore bib tap cast copper alloy chromium plated with fancy type crutch or butterfly handels screwed down for iron pipes or for brass ferrule all as specified and directed by Engr-in-charge. |
| 36 | S&F in repair 15mm bore pillar taps, cast copper alloy, fancy type chromium plated, screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes, att as directed Engr-in-Charge. |
| 37 | S&F in repair chromium plated mixer for wash hand basin for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete all as specified and directed by Engr-in-charge. |
| 38 | S&F vitreous china wash basin white flat back size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but including bracketsall as specified and directed by Engr-in-charge. |
| 39 | S & F in repair Brass chromium plated bath Mixer (2/3 hole) for mixing hot & Cold water arrangement, long shank suitable 15mm bore of pipe of approved quality screwed down for iron pipe and fixed |
| 40 | S&F in repair 15mm bore stop valves/ Angle cock chromium plated screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or for unionall as specified and directed by Engr-in-charge. |
| 41 | S&F in repair PVC ball valves high pressure with epoxy coated aluminium rod & high density plastic ball screwed for 15mm bore pipesall as specified and directed by Engr-in-charge. |
| 42 | S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm all as specified and directed by Engr-in-charge. Make:- Symet/ Prayag |
| 43 | Ditto all as per above item but length 600mmall as specified and directed by Engr-in-charge. |
| 44 | S&F in repair chromium plated shower rose fancy type fixed to 15mm bore pipeall as specified and directed by Engr-in-charge. |
| 45 | S&F in repair waste fitting brass chromium plated 32mm dia for wash hand basin all as specified and directed by Engr-in-charge. |
| 46 | Ditto all as per above item but40mm dia for sinksall as specified and directed by Engr-in-charge. |
| 47 | M & L in repair 75mm th PCC 1:3:6 type C-1 using 20mm graded stone aggregate as inplinth protection finished even and smooth without using extra cement complete all as specified. |
| 48 | S&F in repair PVC low level flushing cistern of capacity 10 litres complete with siphon handle lever float valve and PVC bend including connecting to ITWC/ ETWC and fixing on wall bracket completeall as specified and directed by Engr-in-charge. |
| 49 | S&F in repair 100 mm/ 125mm dia mild steel chromium plated grating fixed on floor trap / nahani trap in Cement mortar 1:6 ,all as specified and directed by Engr-in-charge. |
| 50 | S&F in repair vitreous china squatting pan white orissa pattern size 580 x 440mm with integral foot rests (excludig flushing cistern & flush pipe) with cast iron trap and make good to match with the existing surface of floor all as specified and directed by Engr-in-charge. |
| 51 | S&F in repair vitreous china wash down water closet pan (pedestal pattern) white excluding flushing cistern & flush pipe including connection to out going pipe and flushing pipe completeall as specified and directed by Engr-in-charge. |
| 52 | S&F in repair plastic water closet seatcover white/ black closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging deviceall as specified and directed by Engr-in-charge. |
| 53 | Taking down and Refixing old steel tubing of 15 mm bore and connections in new or old position (walls, ceilings, floors etc.) with new fittings such as sockets, bends, Tees, elbows, unions, nipples etc. |
| 54 | Supplying and laying -16 mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches or fitted in to wallsincluding taking dwon of existing 15mm dia GI pipe etc complete all as specified |
| 55 | Taking down and Refixing old steel tubing of 20 mm bore and connections in new or old position (walls, ceilings, floors etc.) with new fittings such as sockets, bends, Tees, elbows, unions, nipples etc. |
| 56 | Supplying and laying 20 mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches or fitted in to walls including taking dwon of existing 15mm dia GI pipe etccomplete all as specified |
| 57 | S&F in repairPVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls |
| 58 | S&F in repair PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls |
| 59 | S&F in repair PVC (SWR) bends ISI marked any radius of 110 mm borewithaccess door complete all as specified and directed. |
| 60 | S&F in repairrotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) capacity 500 Ltrhoisted and fixed in position all as specified and directed by Engr-in-charge. Make;- Sintex/Polycon |
| 61 | S&F in repair fancy type PVC coated MS draphery rods with brackets 20-25mm bore cut to length as required of colour as selected & directed by Engr-in -Charge. |
| 62 | Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) |
| 63 | M & L for Cement concrete type B-1, 1:2:4 (20mm graded aggregate), 25 mm thick and in floor bedding etc all complete |
| 64 | Dismantling floor, hearth or wall tiling in-cluding cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 65 | M&L for Non Skid ceramic tiles 7 to 8 mm thick ( square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.16 sqm,in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match ( in patches to match the existing colour /shed) over and including screed bed 15mm thick rendering in CM 1:6 all as directed. |
| 66 | M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bedding layer in CM 1:4 complete. |
| 67 | M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertical surfaces such as skirtings/daddosetc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over andincluding 15 mm thick screed bedding layer in CM 1:4 complete. |
| 68 | M & L coloured Glazed ceramic tiles in vertical serfaces 350 x 250 x 7mm / 450 x 350 x 7mm set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including10mm thick rendering in cement mortar 1:4on fair faces of brick work or concrete surfaces as backing for tiles. |
| 69 | M&L for Welding in repairs n. exc 2.5cm in length complete all as specified and directed. |
| 70 | Supply only angle Iron / MS plate / MS sheet for weldingwhere ever required for repair work. |
| 71 | S & F in repair Health Faucet size 15 mm chromium platedwith flexible tube etc complete all as specified & directed |
| 72 | M&Lfor rendering 15mm thick in CM 1:3 on fair faces of bricks or concrete surfaces in patch work in any locationwith water proofing compound such as Dr. Fixit Pidicrete URP or equivalent mixed with cement mortar @ 15% by wt of cement over a coat primer mixed in proportion 1:1 (water proofing admixiture:Cement) finished surface even & smooth all as specified. (cost water proofing shall be deemed included in the quoted rates) |
| 73 | Preparing newly plastered surfaces of walls and apply two coat of cement base paint over a one coat of cement primer etc all complete. |
| 74 | M & L for applying two coat of white wash on newly plastered or unplastered ceiling surfaces including preperation ofsurfaces, complete all as specified. |
| 75 | M&Lfor two coats of oil bound distemper (acrylic) white or tinted over one coat of chalk whitening/primer including preparation of new plastered surfaces of walls etc. |
| 76 | M&L for Cudappah stone slab on cooking platform/shelf 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match over and including 20mm thick screed bed in CM 1:6, the shade of the slab including rubbing and polishing and cutting of holes for gas pipe complete |
| 77 | M&L for20 mm thick granite stone slab of any type with table rubbed and polished in cooking platforms and like set in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite slab complete all as specified and directed. |
| 78 | S&F in repair PVC (SWR) vent cowl for 110 mm bore pipe |
| 79 | S&F in repair PVC (SWR) floor trap with grating 75 mm dia incl jointing with solvent cement |
| 80 | S&F in repair PVC waste pipe size 32 mm flexible with coupling for WHB/Sink/ etc |
| 81 | S&F in repair CP bras soap tray/dish of approved make etc |
| 82 | Supply and fix in repair only floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor, over all length of cover plate 140 mm complete all as specified and directed. |
| 83 | S & F in repair sinks with drainage board made of stainless steel 1 mm thick with plugs, washer, wastes , brackets etc, overall size 915 mm x 460 mm and bowl size 410 mm x 330 mm x 160 mmof Make :- Nirali/Bluestar |
| 84 | S & F in repair sinks with drainage board made of stainless steel 1 mm thick with plugs, washer, wastes , brackets etc, overall size 495 mm x 420 mm and bowl size 410 mm x 330 mm x 160 mm Make :- Nirali/Bluestar |
| 85 | Taking down chowket or frame with shutter (without taking of shutters from the frames) area not exceeding 1.5 Sq mtr each |
| 86 | Taking down chowket or frame with shutter (without taking of shutters from the frames) areaexceeding 1.5 Sq mtr but not exceeding 4 Sq mtr each |
| 87 | Taking down Shutterexc 1 sqm and n.exc 2 Sqm each |
| 88 | Takingdown wooden shutters of any description n. exc 1.00 sqm each and refixing the same opening oftering repairing excluding iron mongry. |
| 89 | Takingdown wooden shutters of any description exc 1.00sqm but n exc 2.00sqm each and refixing the same opening oftering repairing excluding iron mongry. |
| 90 | S&F steel ventilator with top hung shutter including hinges steel peg stay complete |
| 91 | S&F in repairframed work such as grills, gratings etc with ends of bars shouldered and or reiverted or forged into spikes, framed guard bars and similar work conferming to Fe 410-0 or Fe 310-0 |
| 92 | M&L for two coat of synthetic enamel pinting over a coat of red oxide primer incl preparation of steel new surface over 10 cm width or girth |
| 93 | S&F galvanised MS wire cloth, 0.56mm nominal dia of wire average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples |
| 94 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain clour PVC sheet reinforced with M.S square tube in opening as per specification |
| 95 | S&F 24 mm thick PVC flush door shutter having one side lamination with2mm thick rigid PVC prelaminated sheet and 2mm thick plain rigid PVC sheet on other side consisting of frame made out of MS tubes of 19 guage thickness and size of 19 mm x 19 mm for stiles wa well as top, bottom & lock rail.MS frame shall have a coat of metal primer of approved make and manufacturer.The inside panel shall consist of 20 mm thick multi chamber Hollow PVC section, bonded using solvent cement/eynoacrylate adhesive with 5mm (+_0.25) thick Prelam PVC sheet of denisity 600 Kg/Cbn manufacured by an ISO-9001-2015 certified company, on both side of the inside panel.Door to be fixed with frame with 3 nos stainless steel butt hinges of size 100 mm x 25 mm x 2 mm and 50 mm long steel screws drilled suitable to pass through both the walls of MS tube other hardware"s should be fixed with 25 mm x 8 mm size steel screws etc complete as per direction of Engineer-in-Charge |
| 96 | S&F 100 mm long aluminium butt hinges alloy with galvanised ms hinge pin, anofised and fixed type C-21 |
| 97 | S&F 150mm long aluminium anodised barrel tower bolt and fixed |
| 98 | S&F 125mm long aluminium anodised handle cast type and fixed |
| 99 | Petty repairs to leaking water in bib taps, pillar taps stop cock, angle valve, PVC connection waste pipes, float valves, concealed stop cock, GI pipe joints bottle traps etc of any description by changing the washers etc or any other minor accessories to make the system functional complete all as specified and directed by Engr-in-charge. |
| 100 | Petty reapirs to high / low level flusing cistern by adjusting the float valve, leakage PVC connection PVC / GI bend incl replacing of rubber washer cheek uts plunges etc for any type of flush complete all as specified and directed by Engr-in-charge. |
| 101 | M & Lfor tiles cleaning by using appropriate chemical of approved make with using prescribed machine also as necessary to remove stain/ dust etc and maintain beauty of tiles in OTM /MD Accn. Complete all as specified and directed by engr-in-charge. |
| 102 | S&F in repair 15mm bore bib tap Standard of PTMT any colour high pressure screwed for iron pipe and fixed all as specified and directed by Engr-in-charge. |
| 103 | Supply only Expanaded metal in required size , weight n. exc 4 Kg /Sqm complete all as specified and as directed . |
| 104 | Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove by using wire netting of galvanised steel wire with cement mortar 1:3 complete all as specified. Note :- Galvanised steel wire netting shall be measured and paid under relavant items. |
| 105 | S&F galvanised steel wire of mesh in size 12mm, 1.40mm nominal dia of wire and fixed with tinned tacks, or galvanised wire staples for lathing complete all as specified and directed |
| 106 | S&F for chromium plated Zet for ETWC complete |
| 107 | S & F in repair Stain less steel plate rack including fixing overall size 600x900mm depth not less than 25 cmand thickness not lessthan 1mmcomplete all as specified and as directed |
| 108 | S & FDoor Seal rubber etc, complete all as specified |
| 109 | S & F for Sheet corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete. |
| 110 | Roughening surfaces of old concrete floor/terrace by picking incl. taking down existing detoriated / decayed tar felt PCC tiles or any type oftreatment including loose surface, scraping with scraper, chiseling, scraping of surface with wire brush or any other method, sweeping clean & washing down with water to remove dust etc. and removing the scraped materials debris to a distance not exc. 250 m. |
| 111 | M&L for wire brushing and cleaning top surface of tiles,lime terracing or cement concrete,including flashing and junction of parapet,etc,and surface painting with a layer of blown bitumen of any penetration applied hot @1.70 kg per sqm.blinded with grit or pea size gravel @ 0.006 cu.m per sqm and lightly tampered (area of flashing etc.shall be added to the roofarea. |
| 112 | M&L for 10 mm thick screed bed or bedding layer in CM 1:3 mixed with water proofing compound @ 3 % by weight of cement on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and directed. |
| 113 | M&L for Providing water proofing treatment over cleaned roof surface (work to be executed is in Patches in differentnumbers of buildings) with super thermo APP modified water proofing memberanecomprising of the following for roofs (- (a)Cleaning of plastered roof surfaces and applying a coat of bitumen primer @ 0.30 kg/Sqm on top of dry surface of finished cement mortar plaster. (b)One coat of hot blown bitumen of grade 85/25 @ 1.2kg /sqm shall be applied over primed surfaces. (c) One layer of APP based polymeric water proofing membrane of weight not less than 3 kg/Sqm consisting 3mm thick reinforced with polyster non wove fabric shall be unrolled surfaces with lap of 100 mm andthe over lap shall be sealed by flame. |
| 114 | S&F cement concrete tiles size 25cmx25cmx22mm thick machine cut pressed set jointed and pointed in neat cement slurry with grey cement and pigments in floors and cut and polished fixed over and including 15mm thick scredbed in CM 1:6 complete all as specified and directed |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
