Addition Alteration To Karkardooma Court Delhi Dg 2021 22 Sh Replacement Of Wooden Sofa Chair With New Visitor Chairs At I C E D Lockup And Miscellaneous Furniture Work At Courts Of Shahdara District Branch Kkd Court Delhi Aa To Karkardooma Court Delh, delhi-Delhi

Addition Alteration To Karkardooma Court Delhi Dg 2021 22 Sh Replacement Of Wooden Sofa Chair With New Visitor Chairs At I C E D Lockup And Miscellaneous Furniture Work At Courts Of Shahdara District Branch Kkd Court Delhi Aa To Karkardooma Court Delhi Dg 2021 22 Sh Replacement Of Wooden Sofa Chair With New Visitor Chairs At I C E D Lockup And Miscellaneous Furniture Work At Courts Of Shahdara District Branch Kkd Court Delhi , Providing And Supplying Visitor Chair With Ergonomic Design For User Comfort.As Per Sample Approved By Engineer-In-Charge With Following Specifications: The Seat And Back Shall Be Made Of Double Layered ( 12+6 ) Mm Thick Hot Pressed Plywood Upholstered With High Resilience Polyurethane Foam 50Mm Thick Having Density 40Kg / M³ In Seat And 40Mm Thick Having Density 32Kg / M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine And The Armrest Shall Be Used Polyurethane Arm Completely Joint With Seat And Back. The Understructure Shall Consist Of Cantilever Frame Made Up Of Ms / Crca Powder Coated With 50-60? ( Dft ) Round Pipe Of Dia. 31.75Mm With 2Mm Thick And Two Strip At Base Of Ms / Crca Chrome Plated Round Pipe Of Dia. 15Mm With 1.6Mm Thick. There Shall Be Co-Polymer Polypropylene Shoe Provided At The Base To Avoid Scratches On The Floor. The Seat Size Shall Be 520±10Mm ( W ) X 475±10Mm ( D ) And Back Size Shall Be 700±10Mm ( H ) From Seat & Overall Height = 1040±10Mm. Product Having Bifma Certification Yes, Oem Of Offered Product Is Iso 9001:2015 Certified Yes, Oem Of Offered Product Is Iso 14001:2015 Certified Yes, Oem Of Offered Product Is Iso 18001:2007 Certified Yes ( With 2 Years Warranty & Test Certificate To Be Supplied By Agency Alongwith Supply Of Material ) Etc. All Complete As Per Direction Of Engineer-In-Charge. , Providing And Supplying High Back Chair With Ergonomic Design, Comfortable & Aesthetically Appealing.As Per Sample Approved By Engineer-In-Charge With Following Specifications:The Seat And Back Frame Shall Be Made Up Of The Combination Of 15Mm Thick Hot Pressed Commercial Plywood And Ply-Board Padded With High Resilience Polyurethane Foam ( 50+25+30 ) Mm Thick Having Density ( 40, 32 & 32 ) Kg / M³ In Seat And ( 30+25 ) Mm Thick Having Density ( 32, 32 ) Kg / M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine For Lumbar Support Which Helps To Provide Full Back Support As Well As Head Support. Seat And Back Shall Be Covered With Polished Wooden At Both Side For Decorative Appearance. The Chair Shall Be Supplied With Natural Wood Arm Having Melamine Polish And Die Cast Aluminium End Caps. For Seating Durability The Chair Shall Have Torsion Bar 360 Degree Revolving Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 65Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi / Bifma X5.1-2011 Standards. The Pedestal Should Have Metal Insert Crca Covered With Natural Wood Having Pitch Circle Dia. 630 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Confirming To Ansi / Bifma Standards X5.1-2011 Tested To Perform 98, 000 Cycles With 250Lbs Load. The Seat Size Shall Be 510±10 Mm ( D ) X 510±10 Mm ( W ) And Back Size Shall Be 525±10 Mm ( W ) X 710±10 Mm ( H ) From Seat. Overall Height Shall Be = 1170±10 Mm & Overall Width / Depth = 740±10 Mm.Product Having Bifma Certification Yes, Oem Ofoffered Product Is Iso 9001:2015 Certified Yes, Oem Of Offered Product Is Iso 14001:2015 Certified Yes, Oem Of Offered Product Is Iso 18001:2007 Certified Yes ( With 2 Years Warranty & Test Certificate To Be Supplied By Agency Alongwith Supply Of Material ) Etc. All Complete As Per Direction Of Engineer-In-Charge. , Providing And Supplying Coat Stand As Per Sample Approved By Engineer-In-Charge With Following Specifications:Coat Stand Is Made Of Teak Wood , The Natural Polish Of Which Results In Attractive Grains Surface. It Consists Of Top Hanger On Attractive Pedestal. A Smooth, Lacquered Sheesham Wood Construction Adds An Air Of Cool Sophistication To The Wood Coat Rack. Sturdy, Fine Quality Wood Ensures The Standing Coat Rack Lasts For Years And Years To Come. Its Neutral Hue Goes With Any Surrounding.Product Having Bifma Certification Yes, Oem Of Offered Product Is Iso 9001:2015 Certified Yes, Oem Of Offered Product Is Iso 14001:2015 Certified Yes, Oem Of Offered Product Is Iso 18001:2007 Certified Yes ( With 2 Years Warranty & Test Certificate To Be Supplied By Agency Alongwith Supply Of Material ) Etc. All Complete As Per Direction Of Engineer-In-Charge. , Providing And Supplying Visitor Chair With Ergonomic Design For User Comfort As Per Sample Approved By Engineer-In-Charge With Following Specifications:The Seat And Back Shall Be Made Of Double Layered ( 12+6 ) Mm Thick Hot Pressed Plywood Upholstered With High Resilience Polyurethane Foam 50Mm Thick Having Density 40Kg / M³ In Seat And 40Mm Thick Having Density 32Kg / M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine And The Armrest Shall Be Used Polyurethane Arm Completely Joint With Seat And Back. The Understructure Shall Consist Of Cantilever Frame Made Up Of Ms / Crca Powder Coated With 50-60? ( Dft ) Round Pipe Of Dia. 31.75Mm With 2Mm Thick And Two Strip At Base Of Ms / Crca Chrome Plated Round Pipe Of Dia. 15Mm With 1.6Mm Thick. There Shall Be Co-Polymer Polypropylene Shoe Provided At The Base To Avoid Scratches On The Floor. The Seat Size Shall Be 515±10 Mm ( W ) X 495±10 Mm ( D ) And Back Size Shall Be 480±10 Mm ( H ) From Seat & Overall Height = 940±10 Mm.Product Having Bifma Certification Yes, Oem Of Offered Product Is Iso 9001:2015 Certified Yes, Oem Of Offered Product Is Iso 14001:2015 Certified Yes, Oem Of Offered Product Is Iso 18001:2007 Certified Yes ( With 2 Years Warranty & Test Certificate To Be Supplied By Agency Alongwith Supply Of Material ) Etc. All Complete As Per Direction Of Engineer-In-Charge. , Providing And Supplyingstorage Unit As Per Sample Approved By Engineer-In-Charge With Following Specifications: Storage Unit With An Overall Size 900Mm X 450Mm X 750Mm. The Storage Shall Be Made Up Of Pre-Laminated Mdf Board Of Grade Ii Of Is 14587:2008 Or Latest With Approved Laminate And Finish As Per Approved Shade. The Top Shall Be 25Mm Thick, Base 9Mm Thick And All Other Profile I.E. Side, Back, Shutter, Facia, Shelf, Skirting Shall Be 18Mm Thick. The Edges Shall Be Sealed With Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Storage Shall Have 2 Nos. Of Drawer, 2 Nos. Of Shutter Shall Be Provided For Closing And Opening The Storage. The Shutter Shall Be Operated With Concealed Crank Hinge With Ss Handle As Well As Mp Lock Mechanism. The Drawer Shall Be Operated With Roller Channel And Ss Handle. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Provided At Bottom. The Manufacturer Shall Have Quality And Safety Assurance Like Iso-9001:2015, Iso-14001:2015 And Iso-18001:2007, Bifma Membership And Aiota Certification. The Boards Used Should Meet International Standards Of Quality And Safety, Indian Standard Is 14587 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Elasticity Bending Tested As Per Is 2380. ( With 2 Years Warranty & Test Certificate To Be Supplied By Agency Alongwith Supply Of Material ) Etc. All Complete As Per Direction Of Engineer-In-Charge. , Providing And Supplying Storage Unit As Per Sample Approved By Engineer-In-Charge With Following Specifications: Storage Unit With An Overall Size 900Mm X 450Mm X 2400Mm. It Should Be Made Up Of Pre-Laminated Mdf Board Of Grade Is 14587:2008 Or Latest With Approved Laminate And Finish As Per Approved Shade. All Profile I.E. Side, Back, Top, Shutter, Shelf, Skirting Shall Be 18Mm Thick. The Edges Shall Be Sealed With Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Storage Shall Have Four Fixed Shelf. 2 Nos. Of Door Shutters Shall Be Provided For Opening And Closing The Storage Operated With Concealed Crank Hinge And Ss Handle. There Shall Be Buffers Provided At The Bottom To Avoid Scratches On The Floor. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Provided At Bottom. The Manufacturer Shall Have Quality And Safety Assurance Like Iso-9001:2015, Iso-14001:2015 And Iso-18001:2007, Bifma Membership And Aiota Certification. The Boards Used Should Meet International Standards Of Quality And Safety, Indian Standard Is 14587 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Elasticity Bending Tested As Per Is 2380.Product Having Bifma Certification Yes, Oem Of Offered Product Is Iso 9001:2015 Certified Yes, Oem Of Offered Product Is Iso 14001:2015 Certified Yes, Oem Of Offered Product Is Iso 18001:2007 Certified Yes ( With 2 Years Warranty & Test Certificate To Be Supplied By Agency Alongwith Supply Of Material ) Etc. All Complete As Per Direction Of Engineer-In-Charge. , Providing And Supplying Medium Back Chair With Ergonomic Design, Comfortable & Aesthetically Appealing As Per Sample Approved By Engineer-In-Charge With Following Specifications:The Seat And Back Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Moulded Polyurethane Foam 50Mm Thick Having Density 45Kg / M³ In Seat And 45Mm Thick Having Density 35Kg / M³ In Back. The Same Shall Be Upholstered With Fabric Tapestry 1Mm Thick And 300 Gsm. The Back And Base Of Chair Shall Be Supplied With Polypropylene / Abs Moulded Cover And The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine With Back Support. The Seat And Back Shall Be Arrested Together With 50-60? Thick Powder Coated Hr Steel Spine And The Armrest Shall Be Used Black Integral Polyurethane Arm With Metal Insert Completely Joint With Seat And Back. For Seating Durability The Chair Shall Have Swivel Tilt 360 Degree Revolving Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 100Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi / Bifma X5.1-2011 Standards. The Pedestal Should Have Five Legged Injection Moulded In Black 30% Glass Filled Nylon Having Pitch Circle Dia. 650±15 Mm And Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chairs Should Be Injection Moulded In Black 30% Glass Filled Nylon, Confirming To Ansi / Bifma Standards X5.1-2011 Tested To Perform 98, 000 Cycles With 250Lbs Load. The Seat Size Shall Be 485±10 Mm ( W ) X 450±10 Mm ( D ) And Back Size Shall Be 480±10 Mm ( W ) X 400±10 Mm ( H ) From Seat. Overall Height Shall Be 810±10 Mm.Product Having Bifma Certification Yes, Oem Of Offered Product Is Iso 9001:2015 Certified Yes, Oem Of Offered Product Is Iso 14001:2015 Certified Yes, Oem Of Offered Product Is Iso 18001:2007 Certified Yes ( With 2 Years Warranty & Test Certificate To Be Supplied By Agency Alongwith Supply Of Material ) Etc. All Complete As Per Direction Of Engineer-In-Charge. , Providing And Supplying Metal Book Case As Per Sample Approved By Engineer-In-Charge With Following Specifications: Metal Book Case With An Overall Size 915 Mm ( W ) X 320 Mm ( D ) X 1750Mm ( H ) . The Book Case Shall Be Supplied With 4 Nos. Of Individual Compartments. Top, Back & Side Panels Shall Be Made Of 0.8Mm And Rest 1Mm High Yield Strength Crca Sheet Of Grade ‘D’ Confirming To Is: 513. Each Door Shall Have Individual Locking Provision And 4 Mm Thick Transparent Glass For Clear Inside Vision Secured In A Metal Frame Through Rubber Gasket. Each Door Shall Have Scissor Mechanism For Receding Inside The Top Of Respective Compartment Which Ensures Parallel & Smooth Movement. Each Door Shall Have Plastic Side End Caps As Handle Which Is Easy To Grip. Each Compartment Has A Storage Shelf Having Uniformly Distributed Load Capacity Of Each Shelf Is 40 Kg Maximum. The Finish Is Epoxy Polyester Powder Coated To The Thickness Of 40-60?. Adjustable Leveler Shall Be Provided With Metal Insert To Resist Scratches On The Floor And Also Level & Support Structure.Product Having Bifma Certification Yes, Oem Of Offered Product Is Iso 9001:2015 Certified Yes, Oem Of Offered Product Is Iso 14001:2015 Certified Yes, Oem Of Offered Product Is Iso 18001:2007 Certified Yes ( With 2 Years Warranty & Test Certificate To Be Supplied By Agency Alongwith Supply Of Material ) Etc. All Complete As Per Direction Of Engineer-In-Charge. , Providing And Supplying Computer Desk / Table As Per Sample Approved By Engineer-In-Charge With Following Specifications: Overall Size 1200Mm ( W ) X 750Mm ( D ) X 750Mm ( H ) . It Should Have Work Top Made Up Of 25Mm Thick Pre-Laminated Mdf Board Of Grade Ii Of Is 14587:2008 Or Latest With Approved Laminate And Finish As Per Approved Shade. The Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Top Board Shall Be Supported On Fixed Pedestal At One End And Fixed Cpu Unit At Another End. The Desk Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Desk. The Modesty Panel Shall Have 18Mm Thick Pre-Laminated Mdf Board Connected With Both End. 18Mm Thick Pre-Laminated Board Base Keyboard Tray The Keyboard Trey Shall Be Operated By Sliding Channel To Enable Smooth Operation. A Fixed Pedestal Shall Be Provided At One End With 3 Drawer Operated On Roller Channel And 1 Filing Drawer Operated On Ball Bearing Channel. All Drawer Shall Be Operated With Ss Handle With Multi-Purpose ( Mp ) Locking Mechanism. Other Side Of Table Open Type Storage Shall Be Provided Having One Adjustable Shelf To Accumulate Cpu. Complete Understructure Made In 18Mm Thick Pre-Laminated Mdf Board With Appropriate Edge Banding And Drawer Base Shall Be 9Mm Thick. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding Skirting Shall Be Provided At Bottom Of The Pedestal At Both Sides. The Manufacturer Shall Have Quality And Safety Assurance Likeiso-9001:2015, Iso-14001:2015 And Iso-18001:2007, Bifma Membership And Aiota Certification. The Board Used Should Meet International Standards Of Quality And Safety, Indian Standard Is 14587 Or Latestgrade Ii Should Meet Long Time Loadbending, Screw–Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380.Product Having Bifma Certification Yes, Oem Of Offered Product Is Iso 9001:2015 Certified Yes, Oem Of Offered Product Is Iso 14001:2015 Certified Yes, Oem Of Offered Product Is Iso 18001:2007 Certified Yes ( With 2 Years Warranty & Test Certificate To Be Supplied By Agency Alongwith Supply Of Material ) Etc. All Complete As Per Direction Of Engineer-In-Charge. , Providing And Supplyingmodular Table In Completely Knock Down Conditions As Per Sample Approved By Engineer-In-Charge With Following Specifications: Overall Size 1800Mm X 1650Mm X 750Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be Free Standing Structure Constructed With The Help Of Minifix Dowels And Pins. The Table Top Shall Have The Size 1800Mm X 750Mm Made Up Of 25Mm Thick Mdf Board With Approved Laminate And Finish As Per Approved Shade. The Top Profile Shall Be In Rectangle Shape With Front And Back Full Round Post Form Edges And Other Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. A Pullout Keyboard Trey Shall Be Provided Of 18Mm Thick Pre-Laminated Mdf Board Having Size 550Mm X 280Mm. The Trey Shall Be Operated On Keyboard Channel. The Table Top Shall Be Supported Over Mdf Board Base Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End. The Gable End Shall Be Made Up Of 25Mm Thick Mdf Board And Profile Shall Be In Linear Shape With Front And Back Full Round Post Form And Other Edge With Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Shall Be 18Mm Thick Pre-Laminated Mdf Board With Appropriate Pvc Edge Banding Connected With Both End. There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. The Table Shall Have Side Unit For Storage Purpose With An Overall Size 900Mm X 450Mm X 750Mm. The Side Unit Shall Be Made Up Of Pre-Laminated Mdf Board With Top 25Mm Thick And Other Parts 18Mm Thick Like Shutter, Back, Side Panel Etc. It Shall Have 2 Sliding Shutter Which Slides Over Sliding Rail Track. The Shutter Shall Be Operated With Ss Handle And Multi-Purpose ( Mp ) Locking Mechanism. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Provided At Bottom. A Mobile Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 680Mm. The Pedestal Shall Be Made Up Of Pre-Laminated Mdf Board Pedestal Side, Back, Top, Facia Shall Be 18Mm Thick And Drawer Base Shall Be 9Mm Thick. The Pedestal Shall Have 3 Nos. Of Drawer I.E. 2 Box Drawer And 1 Filing Drawer. The Drawer Shall Be Operated With Ss Handle And Easily Close & Open With The Assistance Of Roller Channel And Ball Bearing Channel To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Locked With One Single Key. The Pedestal Shall Be Mounted Over 50Mm Injection Moulded Nylon Castor. A Movable Type Cpu Unit Shall Be Provided With An Overall Size 468Mm X 284Mm. The Cpu Unit Shall Be Made Up Of 18Mm Thick Pre-Laminated Mdf Board And Mounted Over 65Mm Injection Moulded Nylon Castor. The Manufacturer Shall Have Quality And Safety Assurance Like Iso-9001:2015, Iso-14001:2015 And Iso-18001:2007, Bifma Membership And Aiota Certification. The Board Used Should Meet International Standard Of Quality, Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380.Product Having Bifma Certification Yes, Oem Of Offered Product Is Iso 9001:2015 Certified Yes, Oem Of Offered Product Is Iso 14001:2015 Certified Yes, Oem Of Offered Product Is Iso 18001:2007 Certified Yes ( With 2 Years Warranty & Test Certificate To Be Supplied By Agency Alongwith Supply Of Material ) Etc. All Complete As Per Direction Of Engineer-In-Charge. , Providing And Supplying Computer Desk / Table As Per Sample Approved By Engineer-In-Charge With Following Specifications:Overall Size 1500Mm ( W ) X 750Mm ( D ) X 750Mm ( H ) . It Should Have Work Top Made Up Of 25Mm Thick Pre-Laminated Mdf Board Of Grade Ii Of Is 14587:2008 Or Lates With Approved Laminate And Finish As Per Approved Shade. The Profile Shall Be In Rectangle Shape And The Edges Sealed With 2Mm Thick Thin Strip Ofimpermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Top Shall Be Supported On Fixed Pedestal At One End And Fixed Cpu Unit At Another End. The Desk Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Desk. It Should Be 18Mm Thick Pre-Laminated Mdf Board Connected With Both End. 18Mm Thick Pre-Laminated Mdf Board Base Keyboard Tray Shall Be Provided With Size 684Mm X 350Mm. The Keyboard Trey Shall Be Operated By Sliding Channel To Smooth Operation. At One Side A Fixed Pedestal Shall Be Provided With The Size 400Mm X 620Mm X 725Mm With 3 Drawer. The Drawer Shall Be Operated On Roller Channel And Ball Bearing Channel To Enable Smooth Operation. The Drawer Shall Be Operated With Ss Handle And Multi-Purpose ( Mp ) Locking Mechanism. Other Side Of Table Fixed Pedestal Shall Be Provided With The Size 400Mm X 600Mm X 725Mm Having One Adjustment Shelf To Accumulate Cpu. It Shall Have One Shutter Operated With Ss Handle And Concealed Crank Hinge. Complete Understructure Made In 18Mm Thick Pre-Laminated Mdf Board With Appropriate Edge Banding And Drawer Base Shall Be 9Mm Thick. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding Skirting Shall Be Provided At Bottom Of The Pedestal At Both Sides. The Manufacturershall Have Quality And Safety Assurance Likeiso-9001:2015, Iso-14001:2015 And Iso-18001:2007, Bifma Membership And Aiota Certification.The Board Used Should Meet International Standards Of Quality And Safety, Indian Standard Is14587:2008 Or Lates Grade Ii Should Meet Long Time Loadbending, Screw–Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380.Product Having Bifma Certification Yes, Oem Of Offered Product Is Iso 9001:2015 Certified Yes, Oem Of Offered Product Is Iso 14001:2015 Certified Es, Oem Of Offered Product Is Iso 18001:2007 Ycertified Yes ( With 2 Years Warranty & Test Certificate To Be Supplied By Agency Alongwith Supply Of Material ) Etc. All Complete As Per Direction Of Engineer-In-Charge. , Providing & Placiing Acrylic Table Top Elevator Writing Desk Of Bottom Size ( Width 610 Mm, Depth 500Mm, Height 150 Mm, Thickness 10 Mm ) & Movable Part Of Size ( Width 610 Mm, Depth 450Mm, Thickness 10 Mm ) Fixed With Desk Bottom Using 02 Nos. 75 Mm Long Stainless Steel Hinge, 02 Nos. Pen Holding Box Of Size ( Inside Width 120 Mm, Depth 30Mm, Height 95 Mm ) & ( Width145 Mm, Depth 30Mm, Height 55 Mm ) , 02 Nos. Desk Holding & Paper Holding U-Shaped Brass Rod Of Dia 6Mm And Length 820Mmm & 700Mm Respectively Attached With One No. Ashok Stambh Engraved With Satyamev Jayate Of Size ( Height 80 Mm, Width 40 Mm, & Thickness 10 Mm With Back Support Near Four Corner, Backsupport, Document Holding & Adjust Angle Is Made Up Of Acrylic, Whereas Adjustable Rod Is Made Of Brass. Steel But Hinges Shall Be Used Confirming To Is 1341 ( 1992 ) Etc. All Completed As Per Direction Of Engineer-In-Charge.

Refer document

INR 21788.0 /-

INR 10.89 Lakhs /-

Name of Work: A/A to Karkardooma Court Delhi dg. 2021-22. (SH- Replacement of wooden sofa chair with new visitor chairs at I/C E.D. Lockup and miscellaneous furniture work at courts of Shahdara District Branch, KKD Court Delhi).

Sl. No.	Item Description
1	Providing and supplying visitor chair with ergonomic design for user comfort.as per sample approved by Engineer-in-charge with following specifications: The seat and back shall be made of double layered (12+6)mm thick hot pressed plywood upholstered with high resilience polyurethane foam 50mm thick having density 40kg/m³ in seat and 40mm thick having density 32kg/m³ in back. The same shall be upholstered with leatherite tapestry 0.8mm thick and 535 GSM. The backrest shall be made by keeping the natural curvature of the spine and the armrest shall be used polyurethane arm completely joint with seat and back. The understructure shall consist of cantilever frame made up of MS/CRCA powder coated with 50-60µ (DFT) round pipe of Dia. 31.75mm with 2mm thick and two strip at base of MS/CRCA chrome plated round pipe of Dia. 15mm with 1.6mm thick. There shall be co-polymer polypropylene shoe provided at the base to avoid scratches on the floor. The seat size shall be 520±10mm(W) X 475±10mm(D) and back size shall be 700±10mm(H) from seat & overall height = 1040±10mm. Product having BIFMA certification YES,OEM of offered product is ISO 9001:2015 certified YES,OEM of offered product is ISO 14001:2015 certified YES,OEM of offered product is ISO 18001:2007 certified YES (with 2 years warranty & test certificate to be supplied by agency alongwith supply of material) etc. all complete as per direction of Engineer-in-charge.
2	Providing and supplying high back chair with ergonomic design, comfortable & aesthetically appealing.as per sample approved by Engineer-in-charge with following specifications:The seat and back frame shall be made up of the combination of 15mm thick hot pressed commercial plywood and ply-board padded with high resilience polyurethane foam (50+25+30)mm thick having density (40, 32 & 32)kg/m³ in seat and (30+25)mm thick having density (32, 32)kg/m³ in back. The same shall be upholstered with leatherite tapestry 0.8mm thick and 535 GSM. The backrest shall be made by keeping the natural curvature of the spine for lumbar support which helps to provide full back support as well as head support. Seat and back shall be covered with polished wooden at both side for decorative appearance. The chair shall be supplied with natural wood arm having melamine polish and die cast aluminium end caps. For seating durability the chair shall have torsion bar 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 65mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The Pedestal should have metal insert CRCA covered with natural wood having pitch circle dia. 630 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black 30% glass filled nylon, confirming to ANSI/BIFMA standards X5.1-2011 tested to perform 98,000 cycles with 250lbs load. The seat size shall be 510±10 mm(D) X 510±10 mm(W) and back size shall be 525±10 mm(W) X 710±10 mm(H) from seat. Overall height shall be = 1170±10 mm & overall width/depth = 740±10 mm.Product having BIFMA certification YES,OEM ofoffered product is ISO 9001:2015 certified YES,OEM of offered product is ISO 14001:2015 certified YES,OEM of offered product is ISO 18001:2007 certified YES (with 2 years warranty & test certificate to be supplied by agency alongwith supply of material) etc. all complete as per direction of Engineer-in-charge.
3	Providing and supplying Coat stand as per sample approved by Engineer-in-charge with following specifications:Coat stand is made of teak wood , the natural polish of which results in attractive grains surface. It consists of top hanger on attractive pedestal. A smooth, lacquered sheesham wood construction adds an air of cool sophistication to the wood coat rack. Sturdy, fine quality wood ensures the standing coat rack lasts for years and years to come. It"s neutral hue goes with any surrounding.Product having BIFMA certification YES,OEM of offered product is ISO 9001:2015 certified YES,OEM of offered product is ISO 14001:2015 certified YES,OEM of offered product is ISO 18001:2007 certified YES (with 2 years warranty & test certificate to be supplied by agency alongwith supply of material) etc. all complete as per direction of Engineer-in-charge.
4	Providing and supplying visitor chair with ergonomic design for user comfort as per sample approved by Engineer-in-charge with following specifications:The seat and back shall be made of double layered (12+6)mm thick hot pressed plywood upholstered with high resilience polyurethane foam 50mm thick having density 40kg/m³ in seat and 40mm thick having density 32kg/m³ in back. The same shall be upholstered with leatherite tapestry 0.8mm thick and 535 GSM. The backrest shall be made by keeping the natural curvature of the spine and the armrest shall be used polyurethane arm completely joint with seat and back. The understructure shall consist of cantilever frame made up of MS/CRCA powder coated with 50-60µ (DFT) round pipe of Dia. 31.75mm with 2mm thick and two strip at base of MS/CRCA chrome plated round pipe of Dia. 15mm with 1.6mm thick. There shall be co-polymer polypropylene shoe provided at the base to avoid scratches on the floor. The seat size shall be 515±10 mm(W) X 495±10 mm(D) and back size shall be 480±10 mm(H) from seat & overall height = 940±10 mm.Product having BIFMA certification YES,OEM of offered product is ISO 9001:2015 certified YES,OEM of offered product is ISO 14001:2015 certified YES,OEM of offered product is ISO 18001:2007 certified YES (with 2 years warranty & test certificate to be supplied by agency alongwith supply of material) etc. all complete as per direction of Engineer-in-charge.
5	Providing and supplyingstorage unit as per sample approved by Engineer-in-charge with following specifications: storage unit with an overall size 900mm X 450mm X 750mm. The storage shall be made up of Pre-laminated MDF board of grade II of IS 14587:2008 or latest with approved laminate and finish as per approved shade. The top shall be 25mm thick, base 9mm thick and all other profile i.e. side, back, shutter, facia, shelf, skirting shall be 18mm thick. The edges shall be sealed with thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The storage shall have 2 nos. of drawer, 2 nos. of shutter shall be provided for closing and opening the storage. The shutter shall be operated with concealed crank hinge with SS handle as well as MP lock mechanism. The drawer shall be operated with roller channel and SS handle. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The boards used should meet international standards of quality and safety, Indian standard IS 14587 grade II should meet long time load bending, screw-withdrawal strength, modulus of elasticity bending tested as per IS 2380.(with 2 years warranty & test certificate to be supplied by agency alongwith supply of material) etc. all complete as per direction of Engineer-in-charge.
6	Providing and supplying storage unit as per sample approved by Engineer-in-charge with following specifications: storage unit with an overall size 900mm X 450mm X 2400mm. It should be made up of Pre-laminated MDF board of grade IS 14587:2008 or latest with approved laminate and finish as per approved shade. All profile i.e. side, back, top, shutter, shelf, skirting shall be 18mm thick. The edges shall be sealed with thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The storage shall have four fixed shelf. 2 nos. of door shutters shall be provided for opening and closing the storage operated with concealed crank hinge and SS handle. There shall be buffers provided at the bottom to avoid scratches on the floor. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The boards used should meet international standards of quality and safety, Indian standard IS 14587 grade II should meet long time load bending, screw-withdrawal strength, modulus of elasticity bending tested as per IS 2380.Product having BIFMA certification YES,OEM of offered product is ISO 9001:2015 certified YES,OEM of offered product is ISO 14001:2015 certified YES,OEM of offered product is ISO 18001:2007 certified YES (with 2 years warranty & test certificate to be supplied by agency alongwith supply of material) etc. all complete as per direction of Engineer-in-charge.
7	Providing and supplying medium back chair with ergonomic design, comfortable & aesthetically appealing as per sample approved by Engineer-in-charge with following specifications:The seat and back shall be made of 15mm thick hot pressed commercial plywood padded with high resilience moulded polyurethane foam 50mm thick having density 45kg/m³ in seat and 45mm thick having density 35Kg/m³ in back. The same shall be upholstered with fabric tapestry 1mm thick and 300 GSM. The back and base of chair shall be supplied with polypropylene/ABS moulded cover and the backrest shall be made by keeping the natural curvature of the spine with back support. The seat and back shall be arrested together with 50-60µ thick powder coated HR steel spine and the armrest shall be used black integral polyurethane arm with metal insert completely joint with seat and back. For seating durability the chair shall have swivel tilt 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 100mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The pedestal should have five legged injection moulded in black 30% glass filled nylon having pitch circle Dia. 650±15 mm and fitted with 5 nos. twin wheel castors. The castors of the chairs should be injection moulded in black 30% glass filled nylon, confirming to ANSI/BIFMA standards X5.1-2011 tested to perform 98,000 cycles with 250lbs load. The seat size shall be 485±10 mm(W) X 450±10 mm(D) and back size shall be 480±10 mm(W) X 400±10 mm(H) from seat. Overall height shall be 810±10 mm.Product having BIFMA certification YES,OEM of offered product is ISO 9001:2015 certified YES,OEM of offered product is ISO 14001:2015 certified YES,OEM of offered product is ISO 18001:2007 certified YES (with 2 years warranty & test certificate to be supplied by agency alongwith supply of material) etc. all complete as per direction of Engineer-in-charge.
8	Providing and supplying metal book case as per sample approved by Engineer-in-charge with following specifications: Metal book case with an overall size 915 mm (W) X 320 mm (D) X 1750mm (H). The book case shall be supplied with 4 nos. of individual compartments. Top, back & side panels shall be made of 0.8mm and rest 1mm high yield strength CRCA sheet of grade ‘D’ confirming to IS: 513. Each door shall have individual locking provision and 4 mm thick transparent glass for clear inside vision secured in a metal frame through rubber gasket. Each door shall have scissor mechanism for receding inside the top of respective compartment which ensures parallel & smooth movement. Each door shall have plastic side end caps as handle which is easy to grip. Each compartment has a storage shelf having Uniformly Distributed Load Capacity of each shelf is 40 Kg maximum. The finish is Epoxy Polyester Powder coated to the thickness of 40-60µ. Adjustable leveler shall be provided with metal insert to resist scratches on the floor and also level & support structure.Product having BIFMA certification YES,OEM of offered product is ISO 9001:2015 certified YES,OEM of offered product is ISO 14001:2015 certified YES,OEM of offered product is ISO 18001:2007 certified YES (with 2 years warranty & test certificate to be supplied by agency alongwith supply of material) etc. all complete as per direction of Engineer-in-charge.
9	Providing and supplying computer desk/Table as per sample approved by Engineer-in-charge with following specifications: Overall size 1200mm(W) X 750mm(D) X 750mm(H). It should have work top made up of 25mm thick Pre-laminated mdf board of grade II of IS 14587:2008 or latest with approved laminate and finish as per approved shade. The top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. The top board shall be supported on fixed pedestal at one end and fixed CPU unit at another end. The desk shall be clad with 18mm thick modesty panel which provide structural support for the desk. The modesty panel shall have 18mm thick pre-laminated mdf board connected with both end. 18mm thick pre-laminated board base keyboard tray The keyboard trey shall be operated by sliding channel to enable smooth operation. A fixed pedestal shall be provided at one end with 3 drawer operated on roller channel and 1 filing drawer operated on ball bearing channel. All drawer shall be operated with SS handle with multi-purpose (MP) locking mechanism. Other side of table open type storage shall be provided having one adjustable shelf to accumulate CPU. Complete understructure made in 18mm thick Pre-laminated mdf board with appropriate edge banding and drawer base shall be 9mm thick. To protect the wall from kicks, abrasion and serve as a decorative moulding skirting shall be provided at bottom of the pedestal at both sides. The manufacturer shall have quality and safety assurance likeISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The board used should meet international standards of quality and safety, Indian standard IS 14587 or latestgrade II should meet long time loadbending, screw–withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380.Product having BIFMA certification YES,OEM of offered product is ISO 9001:2015 certified YES,OEM of offered product is ISO 14001:2015 certified YES,OEM of offered product is ISO 18001:2007 certified YES (with 2 years warranty & test certificate to be supplied by agency alongwith supply of material) etc. all complete as per direction of Engineer-in-charge.
10	Providing and supplyingModular table in completely knock down conditions as per sample approved by Engineer-in-charge with following specifications: Overall size 1800mm X 1650mm X 750mm that is to be assembled at site. The construction of the main table shall be free standing structure constructed with the help of minifix dowels and pins. The table top shall have the size 1800mm X 750mm made up of 25mm thick mdf board with approved laminate and finish as per approved shade. The top profile shall be in rectangle shape with front and back full round post form edges and other edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. A pullout keyboard trey shall be provided of 18mm thick Pre-laminated mdf board having size 550mm X 280mm. The trey shall be operated on keyboard channel. The table top shall be supported over mdf board base gable end. The end wall of the table on the side shall be topped by gable end. The gable end shall be made up of 25mm thick mdf board and profile shall be in linear shape with front and back full round post form and other edge with appropriate PVC edge banding. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It shall be 18mm thick pre-laminated mdf board with appropriate PVC edge banding connected with both end. There shall be buffers provided at the base to avoid scratches on the floor. The table shall have side unit for storage purpose with an overall size 900mm X 450mm X 750mm. The side unit shall be made up of Pre-laminated mdf board with top 25mm thick and other parts 18mm thick like shutter, back, side panel etc. It shall have 2 sliding shutter which slides over sliding rail track. The shutter shall be operated with SS handle and Multi-purpose (MP) locking mechanism. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. A mobile pedestal shall be provided with an overall size 400mm X 450mm X 680mm. The pedestal shall be made up of Pre-laminated mdf board Pedestal side, back, top, facia shall be 18mm thick and drawer base shall be 9mm thick. The pedestal shall have 3 nos. of drawer i.e. 2 box drawer and 1 filing drawer. The drawer shall be operated with SS handle and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. The pedestal shall be mounted over 50mm injection moulded nylon castor. A movable type CPU unit shall be provided with an overall size 468mm X 284mm. The CPU unit shall be made up of 18mm thick Pre-laminated mdf board and mounted over 65mm injection moulded nylon castor. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The board used should meet International Standard of quality, should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380.Product having BIFMA certification YES,OEM of offered product is ISO 9001:2015 certified YES,OEM of offered product is ISO 14001:2015 certified YES,OEM of offered product is ISO 18001:2007 certified YES (with 2 years warranty & test certificate to be supplied by agency alongwith supply of material) etc. all complete as per direction of Engineer-in-charge.
11	Providing and supplying computer desk/Table as per sample approved by Engineer-in-charge with following specifications:Overall size 1500mm(W) X 750mm(D) X 750mm(H). It should have work top made up of 25mm thick Pre-laminated MDF board of grade II of IS 14587:2008 or lates with approved laminate and finish as per approved shade. The profile shall be in rectangle shape and the edges sealed with 2mm thick thin strip ofimpermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The top shall be supported on fixed pedestal at one end and fixed CPU unit at another end. The desk shall be clad with 18mm thick modesty panel which provide structural support for the desk. It should be 18mm thick pre-laminated mdf board connected with both end. 18mm thick pre-laminated mdf board base keyboard tray shall be provided with size 684mm X 350mm. The keyboard trey shall be operated by sliding channel to smooth operation. At one side a fixed pedestal shall be provided with the size 400mm X 620mm X 725mm with 3 drawer. The drawer shall be operated on roller channel and ball bearing channel to enable smooth operation. The drawer shall be operated with SS handle and multi-purpose (MP) locking mechanism. Other side of table fixed pedestal shall be provided with the size 400mm X 600mm X 725mm having one adjustment shelf to accumulate CPU. It shall have one shutter operated with SS handle and concealed crank hinge. Complete understructure made in 18mm thick Pre-laminated mdf board with appropriate edge banding and drawer base shall be 9mm thick. To protect the wall from kicks, abrasion and serve as a decorative moulding skirting shall be provided at bottom of the pedestal at both sides. The manufacturershall have quality and safety assurance likeISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification.The board used should meet international standards of quality and safety, Indian standard IS14587:2008 or lates grade II should meet long time loadbending, screw–withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380.Product having BIFMA certification YES,OEM of offered product is ISO 9001:2015 certified YES,OEM of offered product is ISO 14001:2015 certified ES,OEM of offered product is ISO 18001:2007 Ycertified YES (with 2 years warranty & test certificate to be supplied by agency alongwith supply of material) etc. all complete as per direction of Engineer-in-charge.
12	Providing & placiing Acrylic Table top elevator writing Desk of bottom size (Width 610 mm, Depth 500mm, Height 150 mm, Thickness 10 mm) & movable part of size (Width 610 mm, Depth 450mm, Thickness 10 mm) fixed with desk bottom using 02 nos. 75 mm long stainless steel hinge, 02 nos. pen holding box of size (inside width 120 mm, Depth 30mm, Height 95 mm) & (Width145 mm, Depth 30mm, Height 55 mm), 02 nos. desk holding & paper holding U-shaped brass rod of dia 6mm and length 820mmm & 700mm respectively attached with one no. Ashok Stambh engraved with Satyamev Jayate of size (Height 80 mm, Width 40 mm, & Thickness 10 mm with Back support near four corner, Backsupport, document holding & adjust angle is made up of acrylic, whereas adjustable rod is made of brass. Steel but hinges shall be used confirming to IS 1341 (1992) etc. all completed as per direction of Engineer-in-Charge.