Repair / Maint Of B / R And E / M Items Of Bldgs Of Group Vi Units / Loc At Rms Under Age B / R-Ii.
Tender Value
42.92 Lakhs
Estimated cost
Bid Submission
30 Jun 2022
0 days left
EMD
85840
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
rangapahar → Meghalaya
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair / Maint Of B / R And E / M Items Of Bldgs Of Group Vi Units / Loc At Rms Under Age B / R-Ii.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete in ground floors and pavings n.exc 15 cm thick above or below ground level. |
| 2 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings. |
| 3 | Dismantling asbestos cement (Corrugated or semicorrugated) sheets in roof covering. |
| 4 | Dismantling wall and ceiling board fibre, pulp insulation etc or insulation boards any thickness including cover fillets complete all as specified . |
| 5 | Dismantling timber scantlings 40 sqcm and over in section, in unframed work any position. |
| 6 | M&L for second class hardwood as in scantlings clean sawn timberfixed. |
| 7 | Dismantling structural steel work including doors, gates but excluding framed truss etc |
| 8 | Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames). |
| 9 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each. |
| 10 | Taking down shutters of any description not exceeding 1 Sqm each. |
| 11 | S&F for pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roofcovering /cladding to wall, fixed with self tapping screws as specified |
| 12 | S&F for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 13 | M & L for cement concretetype C-2,1:3:6(40mmgraded stone aggregates) as in surface channels and drains |
| 14 | M & L for Extra forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement |
| 15 | S & F for4 mm thick of size 600x600mmHSPC (high pressure Steam Cured) pre-primetered self embossed, textured designer boardE-Board Classic to be fixed GI powder coated grid/section size 600mmx600mm with main runner 38x24x0.9mm thick ,cross tee 28.6x24x0.9 mm and wall angle 19x19xo.9 mmduly suspended with 2mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size complete all as specified. |
| 16 | S&F for4 mm thick veneered decorative Plywood (no of ply 05),grade-I (with BWRresin) with decorative face veneers on one face, fixedwith screws to timber frame work complete all as specified and directed. |
| 17 | S&F for5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed. |
| 18 | M&L for Solid PVC Wall Lining consisting of 5mm thick Plain or coloured with wood grains printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame all as specified and directed. |
| 19 | M&L second class hardwood plain fillets exc 13sqcm and notexc. 25sqcm, square or rectangular in section, wrought, secured with nails or brads. |
| 20 | M&L for preparing surface of wood and wood based matreials, new or old, of any description and girth and treaed with tar or coal tar black paint and sanding newly tarred surfaces with clean sharp sand. |
| 21 | Dismantling floor hearth or wall tiling including cement mortar bedding but not backing. |
| 22 | M&L for non skid ceramic colouredtiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry over and including 15mm thick screed bed of CM 1:6 and pointed in white/coloured cement to match all as specified. |
| 23 | M&L for non skid ceramic colouredtiles 7 to 8 mm thick exc 0.11 Sqm but n exc 0.18 Sqm set and jointed in neat cement slurry over and including 15mm thick screed bed of CM 1:6 and pointed in white/coloured cement to match all as specified. |
| 24 | All as per item No 23 here-in-before but in skirting. |
| 25 | M&L for non - skid coloured joint free ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry over and including 15mm thick screed bed of CM 1:6 and pointed in white/coloured cement to match all as specified. |
| 26 | All as per item No 25 above here-in-before but in skirting. |
| 27 | M&L forceramic colouredprinted tiles of size 300x200mmx7 mm thick, on verticals surfaces, set and jointed in neat cement slurry and pointed in coloured. |
| 28 | M&L for coloured glazed ceramic tiles in vertical surface 300mmX450mmx 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed. |
| 29 | M&L for rendering 10 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces to received vertical tiles complete all as specified and directed. |
| 30 | Demolitionof brick work including allquoins arches pillars etc built in cement mortar. |
| 31 | M&L for brick work in cement mortar (1:6) using sub class \"B\" bricks straight or curved on plan exc 6.0 m mean raidus |
| 32 | M&L for brick work with sub class \"B\" bricks straight or curved on plan in any radius in half brick thick walls built in cement mortar 1:4, complete all as specified and directed |
| 33 | Taking down cement plaster on walls built in cement mortaretc including racking out joints, hacking for key, scrubbing down with water etc. |
| 34 | M&L for 15mm thick cement plastering in cement mortar 1:4 brick or concrete surfaces of wall finished fair and even,complete all as specified and directed. |
| 35 | M&L for 15mm thick cement plastering in cement mortar 1:6 brick or concrete surfaces of wall finished fair and even with out using extra cement complete all as specified and directed. |
| 36 | Material & labour 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framed rebated on the solid,rounded or chamfered, put together with glue pinned at joints. |
| 37 | S&F Post, joist, channel, angle or tee section fixed independently without connection plates etc conforming to Fe-410- W (Gde-E-250) quality A |
| 38 | M&L for rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde-E 250) quality-A |
| 39 | S&F factory made 30mm thick, flush shutters, solid core construction, with block board core and plywood face panels complete all as specified and directed. |
| 40 | S&F for second class hardwood 35 mm thick plain, framed, panelled shutter (two panels) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm thick veneered particle board with commercial veneering on both faces; size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated. |
| 41 | S&F for second class hardwood glazed and skeleton door shutters, 30mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (b); supplied and fitted to chowkats. |
| 42 | S&F for second class hardwood glazed and skeleton window and ventilator shutters, 30mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (b); supplied and fitted to chowkats. |
| 43 | S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening. |
| 44 | S&F for Factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C\" channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame wedded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site. |
| 45 | S&F anodised aluminium powder coated any colour frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 46 | S&F for anodised aluminium powder coated any colour window and ventilator shutters, fixed type without sash bar, aluminium section of size 40 x 18 x 1.29mm thick including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified. |
| 47 | S&F for anodised aluminium powder coated any colour door shutter, aluminium section weighting 0.55 kg/m including necessary joining, cleats,glazing clips,rubbber neoprene, packing headls 2 nos in each door hinges anodised aluminium snap beading screw etc.complete all as specified. |
| 48 | S&F Sheet glass 4.8mm thick clear/sun shade colour glass, ordinary quality and glazing with oil putty in squares exceeding 0.5sqm in each pane. |
| 49 | S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5sqm in each pane. |
| 50 | S&Ffor galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples. |
| 51 | S&F in repairs, galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples. |
| 52 | M&L for prelaminated particle board 12mm thick, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination as in pelmet boxes or in narrow widths not exceeding 15 cm each, rebated or flat edged including 6mm thick teak wood lipping allround. |
| 53 | M&L for PCC 1:3:6 type C2 (40mm graded stone agg) 100mm thick as insub base |
| 54 | M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Gradelaid, jointed with grey cement and no pigment complete all as specified including preperation of formation bed over 25 mm thick sand cusion and pointed in colour cement mortar 1:3 |
| 55 | S&F Butt hinges, medium weight, cold rolled mild steel,75mm size. |
| 56 | S&F Butt hinges, medium weight, cold rolled mild steel, 100 mm size. |
| 57 | S&F 300mm ordinary mild steel rat tail rod patttern springs includding roller and roller plate complete. |
| 58 | S&F Aluminium, anodised, barrel tower bolt 200mm longof extruded section and fixed complete. |
| 59 | S&F Aluminium, anodised, barrel tower bolt 150mm longof extruded section and fixed complete. |
| 60 | S&F for 300mm aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts fixed. |
| 61 | S&F Extruded aluminum alloy handles, fabricated type, anodised 100 mm size. |
| 62 | S&F in repairs Mortice lock,vertical type Brass 2 levers, size 100 mm |
| 63 | S&F Extruded aluminum alloy handles, fabricated type, anodised 150 mm size. |
| 64 | S&F Harrison rails, 20mm dia mild steel, chromium plated with fixing brackets, stops, rollers etc. fixed in repairs. |
| 65 | M&L for french polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats. |
| 66 | S&F in repair for aluminium (extruded section) bodydoor closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 67 | S&F in repair floor door stopper overall length of cover plate 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor |
| 68 | Preparation of new plasteredsurfaces of walls and applying twocoats of white wash completeall as specified and directed. |
| 69 | M&L for preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying onecoat of synthetic enamel paint all as specified. |
| 70 | M&L for preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. - |
| 71 | Material and labour for preparation of old steel surface and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 72 | M & L for preparation of newly untreated steel surfacesof any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primercomplete all as specified and directed. |
| 73 | M&L for Preparation of old decorated surfaces and appplying one coat of white wash on walls, cornices etc. complete all as specified and directed. |
| 74 | All as per item No. 73 above but on ceiling. |
| 75 | M&L for Preparation of old decorated surfaces by washing, scrubbing down, and applying one coat of oilemulsion distemper on walls.all as specified and directed |
| 76 | All as per item No 75 above buttwo coat of distemper . |
| 77 | Preparation of olddecorated plastered surface of any description and applying one coat of plastic emulsion paint complete all as specified and as directed. |
| 78 | S&F 15mm borebib cock chromium plated fancy type, screwed down, screwed for iron pipe or for brass ferrule. |
| 79 | S&F in repairs 600mm long tubular tower rail brass chromium plated 20mm dia, D type 60cm longfixedwith two plugs (Gutties) of 2nd class hard woodembeded in cement mortor 1:3 with MS screwscomplete all as specified. |
| 80 | S&F PVC Shelves of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105 gms) |
| 81 | S&F in repairs PVC connection 15mm size with PTMT nuts, of 450 mm length complete all as specified and directed. |
| 82 | S&F in repairs 600x450 mm size of 5.5mm thickness looking mirror, bevelled edge of selected quality glass with aluminium frame made of channel alround,mounted on 6 mm thick commercial ply or AC building board, fitted to wooden plug with CP screws complete all as specified and directed. |
| 83 | S&F in repairs for 15mm dia of pipe Anglevalves,fancy type and chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for Unions and fixed . |
| 84 | S&F in repair of PVC low level flushing cistern dual flush top push,10 Ltr capacity symphonic action type white as approved, ball valve float valve and handle, flush pipe incl CP bracket |
| 85 | Supply and fixed in repair vitreous china wash hand basin including brackets, white size 550 x 400 mm incl cutting cutting for and pinning in ends of brackets. Including Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed |
| 86 | Taking down AC/Salt glazed warepipes and fittings upto 110mm. |
| 87 | S&F in repair 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor |
| 88 | S&F in repair 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor |
| 89 | S&F in repair 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall |
| 90 | S&F of 110mm dia PVC (SWR) bends |
| 91 | S&F 75mm PVC(SWR) bends any radius with access door. |
| 92 | S&F of 75 mm dia PVC (SWR) Vent cowl |
| 93 | S & F 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 94 | S&F in repairs for 75mm bore dia pipe Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof |
| 95 | Taking upor down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing. |
| 96 | Taking upor down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing. |
| 97 | S&F tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 15 mm bore. |
| 98 | S&F tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 20 mm bore. |
| 99 | M&L 75 mm thick cement concrete type C2 1:3:6 (40 mm graded aggregate) as in plinth protection, using extra cement for finishing. |
| 100 | S & F waste coupling of PTMT (half or full threaded) 32 mm dia ,complete all as specified and as directed. |
| 101 | S&F in repairs vitreous china water closet Padestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe and including EWC Sheet cover complete all as directed. |
| 102 | M&L for vitreous china squatting pan, Orissa, pattern size 580 x 440 mm white with integral foot rests(excluding flushing cistern and flush pipe)including connection to trap and to flushing pipe, anti-syphonage pipe etc complete including making good to floor complete all as per specified and directed. |
| 103 | S&F plastic water closet seat cover, black closed pattern with flat bottom and cover and MS chromium plated or aluminium hanging device ,fixed in repair,complete all as specified and directed. |
| 104 | S&F PVC waste pipe, 32mm bore, 750mm long for basin, fixed in repair,complete all as specified anddirected. |
| 105 | M&L Water proofing treatment on RCC roof etc. comprising with the following operations and as specified herein below :-(a) Taking down/scrapping out existing old tarfelt bituminous compoundincluding, sweeping, cleaning, washing down to remove dust etc and removing debris to a distance n.exc. 250m.(b) 15 mm thick plastering in cement mortar 1:4 mixed with WPC @ 3% by weight of cementfinished even & smooth and curing for minimum 7 days. (c) Preparing & cleaning of fully dried cement plastered surface (d) Applying one coat of cold bituminous primer to the plastered surface @ 0.25 litres per Sqm conforming IS-3384 - 1986 (e) A layer of APP based polymeric membrane 3mm thick (minimum), weighing 3.5 kg per Sqm reinforced with polyester non woven fabric (weighing not less than 160 gms/sqm )shall be applied over bituminous primer as specified above.Application of polymeric membrane shall be by torch application. The over lap shall be minimum 100 mm on transverse direction and 75 mm on longitudinal direction. |
| 106 | Demolition of cement concrete (unreinforced) of any description and in any position including taking out water closet Indian type/ EWC and removal of lime concrete bed, \"P\" or \"S\" trap and cleaning the sunken portion complete all asdirected. |
| 107 | M&L (a) Top of RCC slab in sunken portion including peripheral beams shall be plastered with 15mm thick cement and sand mortar (1:3) using approved water proofing compound @ rate of 3% by wt of cement and finished even and smooth with out using extra cement and curved adequately and allowed to dry. (b) Two coat of epoxy resin/polymer modified cementaticious coating like brush bond of Fosroc or equivalent both on floor or wall/beam shall be applied as per manufacturer\"s instruction. (c) Slab to be given 1:20 slope outwards with 25mm GI pipes spout with 300mm projection beyond outer surface of wall. (d) Water tightness by flooding for 72 hours the same shall be filled with lean concrete (1:4:8) type D2 using cinder upto required depth (lean concrete will be measured seperately). Surrounding to WC Pan shall how ever be of limeconcrete as specified and directed. (e) All stages shall be passed by GE personally. |
| 108 | M & Lcement concrete type D-2, 1:4:8, using 40mm graded aggregate as in fillings for sunken portionand mass concrete. |
| 109 | S&F in repairs CP wall mixer (3 in 1) complete all as specified and direcated and as approved by GE. |
| 110 | S&F in repairs CP Central hole basin mixer fancy type 15mm dia all as specified and directed. |
| 111 | S&F in repairs CP Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and directed. |
| 112 | S&F 15mm diapillar tap cast copper alloy chromium plated fancy type(ISI Marked) |
| 113 | Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fitting&fixtures such as switches with board, ceiling roses, pendents, bell/buzzer, bell push, lamp holders, regulators, sockets, light fittingsetc. removing materials from site and making good to the disturbed surfaces of walls, ceiling floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface complete all as specified and as directed. |
| 114 | M&L for Point wiring complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable1100 volts grade with multi-stranded copper conductors, drawn throughand including PVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connecting to earth dolly, including PVC rectangular box for mounting switches/sockets/regulators etc. with 3mm thick plastic laminated sheet cover of suitable size as required at site complete all as specified and as directed. Make: Richa/KEI/Polycab Make of caping/casing & PVC boxes: Prestoplast/finolex/Supreme/Richa |
| 115 | Onelight/Call bell point controlled by one, one way switch. |
| 116 | One Exh/Ceiling fan point controlled by one, one wayswitch. |
| 117 | One 3 pin socket outlet 5 Amps on the same board with other switches. |
| 118 | One 3 pin socket outlet 5 Amps on the Independent board. |
| 119 | All as per item No 114.00 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed. |
| 120 | M&L for Switch Piano, flush type single pole, one way 5 Amps complete all as specified and directed.Make:-Anchor/Legrand/Kinjal |
| 121 | M&L for Socket outlet, 2 in 1, 3 pin 5A flush typeMake:- Havells/Legrand/Anchor |
| 122 | M&L for Switch Socket combination, 2 in 1, 5 pin 5A flush typeMake:- Havells/Legrand/Anchor |
| 123 | M&L Switch socket combination 2 in 1, 5A/16A, 5 in 1 flush typeMake:- Havells/Legrand/Anchor |
| 124 | M&L for stepped type electronic fan regulator 100/120 Watt socket size flush type on the existing phenolic laminated sheet etc.Make:- Havells/Legrand/Achor |
| 125 | M&L forceiling rose 3 terminal PVC/Polycarbonate isolated body with PVC round/squareblock complete all as specified and directed.Make:-Anchor/Legrand/Kinjal |
| 126 | M&L for replacement of Bell AC 230 volts musical type.Make:-Anchor/Legrand/Kinjal |
| 127 | M&L for replacement of bell push switch 5 amps piano type flush type Make:-Anchor/Legrand/Kinjal |
| 128 | M&L for 20 Watt LED, 4\", Wall mounted decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack complete all as specified and as directed.Make : Havells/Bajaj/Philips/CG |
| 129 | Repair/Replacement for 20 Watt LED, 4\", Wall mounted decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack complete all as specified and as directed.Make : Havells/Bajaj/Philips/CG |
| 130 | M&L for 10 Watt LED, 2\", Wall mounted decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack complete all as specified and as directed.Make : Havells/Bajaj/Philips/CG |
| 131 | Repair/Replacement for 20 Watt LED 4\" Tube with single/Double side connection suitable for batten light fitting incl taking down complete all as specified and directedMake : Havells/Bajaj/Philips/CG |
| 132 | Repair/Replacement for Lamp holder , PVC/ Polycarbonate type with PVC round/square block incl 9 watt LED lamp suitable for lamp holder fittings incl taking down old unsv light fitting. Make : Anchor/legrand/Havells make LED lamp :Havells/Bajaj/CG |
| 133 | Repair/Replacement for piano switch single pole 5A, one way complete all as specified and as directed Make : Anchor/Legrand/Havells |
| 134 | Repair/Replacement for switch socket combination 6 Amps 5 pin , 230 volt flush type complete all as specified anddirected Make : Anchor/Legrand/Havells |
| 135 | Repair/Replacement for switch socket combination 16 Amps 5 pin230 volt flush type complete all ascomplete all as specified and directed Make : Anchor/Legrand/Havells |
| 136 | Repair/Replacement for socket outlet 5 pin 6A, 230 volt flush type complete all as specified and directed Make : Anchor/Legrand/Havells |
| 137 | Repair/Replacement for fan regulator 100/120 watt step type AC 220 volt complete as complete all as specified and as directed Make : Anchor/Legrand/Havells |
| 138 | Repair/Replacement for Modular Switch 1 way 6A,1 moduleMake:-Anchor/Legrand/Havells |
| 139 | Repair/Replacement for modular switch 1 way 16A, 1 module Make:-Anchor/Legrand/Havells |
| 140 | Repair/Replacement for Modular Socket ,6A/2/3 pin combined 2 moduleMake:-Anchor/Legrand/Havells |
| 141 | Repair/Replacement Modular Socket ,6A/16A-2/3 pin combined 2 module Make:-Anchor/Legrand/Havells |
| 142 | Repair/Replacement ModularBell push 1 Way 6A 1 module Make:-Anchor/Legrand/Havells |
| 143 | Repair/Replacement Modular stepped type electronic fan regulator 120 Watt socket size flush type on the existing phenolic laminated sheet etc.Make:-Anchor/Legrand/Havells |
| 144 | Repair/Replacement for Lamp holder(Penta, Batten,Angle Type) PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. |
| 145 | Supply and fixing for PVC switch board 8\" x 6\" suitable for switch socket complete all as specified and directedMake : Richa/ ABB/ Presto Plast |
| 146 | All as per item No 141.00 PVC switch board 7\"x4\" Make : Richa/ ABB/ Presto Plast |
| 147 | All as per item No 141.00 PVC switch board 4\" x 4\"Make : Richa/ ABB/ Presto Plast |
| 148 | Taking down existing burnt aluminium/ copper sub main wiring and M&L for sub main wiring with two runs of4 Sq mm and one run of 4 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn throughand including PVC double locked Casing & caping including complete all as specified and as directed. NOTE:- two runs of 4 Sq mm + one run of 4Sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length .Make:- Richa/Finolex/Havells/RR KabelMake of caping/casing :- Prestoplast/Finolex/supreme |
| 149 | M&L for replacement of 40 watt LED 2\" x 2\" recess mounte ceiling light fitting extruded aluminium heat sink propvided for efficient heat dissipation & integrated electronic driveetc with all accessories internally pre wired incl taking down old unsv complete all as specified and as directed.Make :Havells/Bajaj/CG/Philips |
| 150 | M&L for replacement of 20 Watt LED security light fitting, drawn through including connecting up to from ceiling rose to the light fittingincl taking down old unsv light fitting complete all as specified and directed.Make :Havells/Bajaj/CG/Philips |
| 151 | M&L for decorative wall light fixture made up of polycarbonate including 9 watt LED lampwith B-22 base including taking down old UNSV complete all as specified and directed.Make : CG/Bajaj/Havells Cat No LHDL06160099 |
| 152 | M&L for MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, with bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacityincluding taking down old unsv MCB DBs complete all as specified and as directed.Make:- Legrand/BB/Siemens |
| 153 | All as per item No 148.00 above but SPN 4 Way complete all as specified and as directed.Make:- Legrand Cat No 507610 or equivalent in ABB/Siemens |
| 154 | All as per item No 148.00 above but SPN 2 Way complete all as specified and as directed.Make:-Legrand/ABB/Siemens |
| 155 | Supply and fixing MCB TPN 40 to 100 Amps415V 10KA \"C\" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and Commissioningincl taking down old unsv MCB complete all as specified and as directed. Make : Legrand/ABB/Siemens |
| 156 | M&L for Replacement ofMCB SPN 32 amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioningincl taking down old unsv MCB complete all as specified and as directed. Make:- Legrand/BB/Siemens |
| 157 | M&L for Replacement of MCB SP 6-32 amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning incl taking down old unsv MCB complete all as specified and as directed. Make:- Legrand/BB/Siemens |
| 158 | M&L for 1.5 Sqmm wire x 2 Core PVC insulated sheathed copper flexible cable as per IS 694 Complete all as specified and directed.Make : Finolex/Richa/Havells |
| 159 | All as item No 154.00 above but in 2.5 Sqmm 2 core complete all as specified and directed.Make : Finolex/Richa/Havells |
| 160 | M&L for replacement of PVC casting & caping 25x12mm complete all specified and as directed Make : Presto plast/Supreme/Richa |
| 161 | All as per item No 156.00 above but in 32x12mm.Make : Presto plast/Supreme/Richa |
| 162 | Supply and fixing for flexible pipe size 20 mm (Colour : White/ Grey) |
| 163 | Supply and fixing for flexible pipe size 25 mm (Colour : White/ Grey) |
AI Tender Summary
Tender Timeline
Jun 16, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJun 30, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 02, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender