|
| 1 | Earthwork in excavation, loading, unloading and carriage by mechanical means of all kinds of soil including ordinary soil, hard soil , stony earth, gravel and moorum etc interspread with boulders up to1/2 cum size for base stripping including dressing and leveling the bed to design section and disposal of unutilized excavated soil away from work site in the specified spoil yard with all leads, lifts and delifts, including dewatering if any shoring, shuttering and propping of bullah piles trimming of slopes and bed with all cost of all machineries and all other taxes excluding GST and cess etc complete with all T&P and supervision charges etc as per the approved drawing, design and specification and direction of the Engineer in charge. |
| 2 | Earthwork in excavation, loading, unloading and carriage by mechanical means in D.I.Rock, latrite and soft rock not requiring blasting etc interspread with boulders up to1/2 cum size for base stripping including dressing and leveling the bed to design section and disposal of unutilized excavated soil away from work site in the specified spoil yard with all leads, lifts and delifts, including dewatering if any shoring, shuttering and propping of bullah piles trimming of slopes and bed with all cost of all machineries and all other taxes excluding GST and cess etc complete with all T&P and supervision charges etc as per the approved drawing, design and specification and direction of the Engineer in charge. |
| 3 | Filling foundation and plinth with sand including watering and ramming with all labour, T&P etc complete to the required level including cost, carriage, royalty & cess, , taxes of all materials excluding GST, etc complete as per direction of the Engineer in charge. |
| 4 | Cement concrete of design mix of M15 grade having specified characteristic compressive strength of 15N/mm2 in design mix with minimum quantity of cement as specified in I.S. code of 150 mm cube at 28 days curing after mixing & tests conducted in accordance with relevant clauses of I.S. - 516 using crusher broken hard granite coarse aggregate 20mm down graded and proportion as specified in I.S. 456 code and subject to mix design in conformity to the grading and proportion of different materials of concrete in structures as specified in the relevant codes of approved quantity obtained from approved quarry of tested and approved quality free from weathered skin surface and any other deleterious materials, uniform colour & texture with provision of expansion joints and weep holes as necessary using proper materials at suitable intervals with all leads, lifts and delifts including cost, carriage, royalties, taxes of all materials excluding GST, but including cess and quality control test cost of all materials, dewatering, mixing and vibrating by mechanical means placing in proper place and providing grooves or beads wherever necessary including cost, carriage of water, curing , T&P, hire & running charges of all machineries, labour and supervision charges including mobilization and demobilization and working of machineries etc with cost of construction and maintenance of coffer dam and diversion arrangement and removal required in complete as per approved drawing , specification and direction of the Engineer in charge. |
| 5 | Cement concrete of design mix of M25 grade having specified characteristic compressive strength of 25N/mm2 in design mix with minimum quantity of cement as specified in I.S. code of 150 mm cube at 28 days curing after mixing & tests conducted in accordance with relevant clauses of I.S. - 516 using crusher broken hard granite coarse aggregate 20mm down graded and proportion as specified in I.S. 456 code and subject to mix design in conformity to the grading and proportion of different materials of concrete in structures as specified in the relevant codes of approved quantity obtained from approved quarry of tested and approved quality free from weathered skin surface and any other deleterious materials, uniform colour & texture with provision of expansion joints and weep holes as necessary using proper materials at suitable intervals with all leads, lifts and delifts including cost, carriage, royalties, taxes of all materials excluding GST, but including cess and quality control test cost of all materials, dewatering, mixing and vibrating by mechanical means placing in proper place and providing grooves or beads wherever necessary including cost, carriage of water, curing , T&P, hire & running charges of all machineries, labour and supervision charges including mobilization and demobilization and working of machineries etc with cost of construction and maintenance of coffer dam and diversion arrangement and removal required in complete as per approved drawing , specification and direction of the Engineer in charge. |
| 6 | Labour charges for straightening, coiled or bend up M.S. or HYSD bars confirming to grade fe-500 of tested and approved quality, cutting, bending, lapping, slitting , welding etc and confirming I.S. Specification and jointing if necessary by lapping and tying the grills and placing in position in ties chairs and spaces as required for fabrication and fixing of reinforcement for RCC works as per the approved design with all leads and lifts from bending yard to placement spot including all cost and conveyance of M.S. or tor-steel bars of SAIL / TATA / approved make and binding wire of 18 to 20 gauges etc complete (Weight of binding wire has not been considered for payment. Standard co-efficient of different sizes of the steel shall be considered and welding and lapping shall confirming to relevant clauses of I.S. code) including cost of all labours, T&P and supervision charges, taxes of all materials excluding GST but including cess etc complete as per design, drawing and direction of the Engineer-In-charge. |
| 7 | Providing formwork for concrete with F1 finish for both face of c.c.wall, guard wall & structures etc, exposed & unexposed surface of foundation, block joints etc with steel shutters rigidly fixed and removal of forms and making good to the surfaces where necessary complete with all labour, materials, supervision charges, conveyance and T&P, cess & taxes of all materials excluding GST, etc complete as directed by the Engineer in charge & as per the approved drawing , design and specification |
| 8 | Providing,contraction/contruction joint in cross drainage structures including fixing one line Z-type copper sealing strip of 16SWG (1.63mm thick) and one line of PVC water stop of approved design including fixing 20 mm dia G.I. Pipes for heating and filling with asphalt of approved grade with cost of all materials, labour, transportation and taxes, but excluding GST etc. complete including jointing sheets with bredzing/areldite etc. as in specification, approved drawings and as directed by the Engineer-in-charge |
| 9 | Providing and fixing joint filler board 25mm thick of approved quality including cost, conveyance, taxes of all materials excluding GST, cess etc complete with all labour & T&P required for the work as directed by the Engineer in charge. |
| 10 | Providing weep holes in plain / reinforced concrete walls, abutment , wing wall/ return wall, retaining wall etc with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V: 20 H towards drawing face complete as per approved drawing and technical specification including removal of clogged materials for weep holes and providing adequate filter materials at the face of the A.C. pipes with cost, carriage, royalties , cess, taxes of all materials excluding GST, T&P , labour and supervision charges etc complete as per direction of the Engineer-in-charge. |
| 11 | Rough stone dry packing in aprons and revetments to designed thickness and slope using30 cm & above size hard broken granite stone of approved quality from approved quarry free from weathered skin and any other deleterious materials including filling the interstices with small stones, spalls etc and wedging with hammer and placing the surface to proper line and level, fixing key stones including dewatering, if any with all cost, labour, conveyance and all leads and lifts, royalties, cess, T&P, taxes of all materials excluding GST etc complete in all respect as per drawing, specification and direction of the Engineer- in- charge. |
| 12 | Filling foundation and plinth with excavated materials including watering and ramming with all labour, T&P etc complete to the required level including cost, carriage, royalty & cess , taxes of all materials excluding GST, etc complete as per direction of the Engineer in charge. |
| 13 | Earth work in excavation in any approved type of soil in approved borrow area free from logs, stumps, roots or any other ingredients likely to deteriorate or effect the stability of bed, bank by mechanical means, loading into & transportation by mechanical means and unloading soil with all leads & lifts on properly prepared & scientifically approved surface free from weeds, roots and shrub jungles ,including, spreading & leveling the earth in 22.5 cm layers to make the fill ready for watering and compaction by sheep foot roller & dozer or any other suitable compaction equipments approved by Engineer-in-charge in flood / canal bank of all heights and including cost of all materials, T&P, with all royalties, cess & taxes of all materials excluding GST but including cost of quality control tests, mobilisation & demobilisation, supplying, operation, maintenance of all machineries, equipments, materials and labour, cess required for the work including supervision charges, cost of cutting and trimming the extra fill in the slopes of the canal/flood embankment to design section, construction, maintenance, watering and lighting of haul roads, borrow areas and cost of related diversion arrangement for diversion of flow during working seasons and removal and disposal of the same after completion of the work etc. complete as per approved design, drawing and specification and direction of the Engineer-in-charge excluding compaction charges (Measurement is to be taken on the finished level section & payment will be made after compaction ). |
| 14 | Watering and compacting the earth fill in canal / flood embankments under O.M.C. condition by sheep foot roller and dozer or any other suitable compaction equipments as approved by Engineer-in-Charge, in layers not exceeding 22.5 cm in depth to required design density to achieve 95% proctor density including cost of quality control tests, mobilization and demobilization, supplying, running and maintenance charges of all machineries and equipment, cess, taxes of all materials excluding GST, labour required for the work and inclusive of supervision charges for all heights of embankment with all incidental charges to complete the item of work as per approved designs, drawings, specifications and as per the directions of the Engineer-in-Charge,(Measurements will be taken on compacted finished approved level section). |
| 15 | Fine dressing of earth work in slopes including filling of rain cuts and slips with selected earth duly compacted and trimmed to the required profile and turfing the surface with best compacted dub grass sods 8cm to 10cm thick including collection & supplying the same and conveyance charges, royalty, Cess and taxes of all materials excluding GST with all leads, lifts and delfts by mechanical means including laying and trimming to form a level and compact surface in line with the slopes and grade of the canal section or earth embankment section of river including watering until the green growth of grass including mobilization and demobilization etc complete as per design, drawing and specification and direction of the Engineer-in-Charge. (Measurement will be taken after full survival of turf). |
