Supply Of Miscellaneous C&I Tools & Tackles And Consumable Items For 1 X 500 Mw Unit-6 At Gsecl, Utps.(Imd-6)- Rotary Draw Type Manual Pipe Bender,Brass Bulk Head Union Suitable For 6 Mm Od Tube, Tube End Thread Size: 1/4&Quot; Bsp With Two Nuts, Two Ferrules And Two Check Nuts,Brass Bulk Head Female Connector, One End Shall Have 1/4&Quot; Female Npt Connection & Second End Suitable For 6 Mm Od Tube, Tube End Thread Size: 1/4&Quot; Bsp With One Set Of Nut,Ss 316 Drop Size (Reducing Type) Branch Type Male Union Tee Suitable For 10 Mm & 06 Mm Od Tube With Three Nuts And Three Sets Of Ferrule & Back Ferrule,Set Of Ss Ferrule & Back Ferrule For 10 Mm Od Tube,Screwed End Needle Angle (90 Deg) Brass Valve For Chlorine,Viton Rubber O-Ring Size: 52 X 3.55 Mm,Rod End Phs6r Or Equivalent,Rod End Phs6l Or Equivalent,Rod End Pos6 Having Right Hand M6x1mm Male Thread,Rod End Pos6 Having Left Hand M6x1mm Male Thread,Stainless Steel Female (M6x1mm Thread) Clevis Joint For Rod End Having Ss Pin Size 5.5Mm Od, Ss Extended Prong Hairpin Cotter Pin, Ss Washer, Ss M6x1mm Threaded Stud With Ss Plain & Lock Washer,Stainless Steel Male(M6x1x25mm Thread)Clevis Joint For Rod End Having Ss Pin Size 5.5Mm Od,Ss Extended Prong Hairpin Cotter Pin,Ss Washer With Ss Plain & Lock Washer.The Clevis Opening Size C Shall Be Able To Accept Rod End Joints I.E.9Mm.,Forged Brass Angle Valve For Line Isolation Having Flare Type End Connection Suitable For 1/4&Quot; Od Tube With Flare Nut And Process Connection: 1/4&Quot; Npt,Forged Brass Angle Valve For Transducer Isolation Having Flare Type End Connectionsuitable For 3/8&Quot; Od Tube And Process Connection: 3/8&Quot; Npt (M),Forged Brass Packless Diaphragm Type Straight Valve Having Flare Type Male Connections Suitable For 1/4&Quot; Od Tube With Two Nos. Flare Type Nuts,Forged Brass Straight Valve Having Flare Type Male Connection Suitable For 1/4&Quot; Od Tube With Two Nos. Flare Type Nuts,Hexagonal Brass Union With 3/8&Quot; Flare (F) X 1/4&Quot; Bsp (F) Connection, Length 65 Mm,Hexagonal Brass Union With 3/8&Quot; Flare (F) X 1/4&Quot; (F) Flare Connection, Length 65 Mm,Gaitor / Bellow Along With Clip For Rotex Make Pneumetic Cylinder Model No: C-D-S- Av+Bg+Su-Mp2-100/100,Copper Tube Cutter Suitable To Cut1/4,5/16,3/8,1/2,Tube Bender,Tube Cutter For Ss Tube Size: 1/2&Quot; Od,Tube Cutter For Copper Tube Size: 1&Quot; Od,Solenoid Plunger Of Ss 410 & Silicon Rubber Material As Per Drawing For Load-Unload Solenoid Valve,Solenoid Plunger Of Aluminum: 95.18%, Fe: 2.54%, Ti: 1.19%, Cr: 1.02%, Zn: 0.06% & Silicon Rubber Material As Per Drawing For Rotex Make Solenoid Valve,Zink Plated Cs Nut 11 Mm Thick Thread: M 28X2.0,Zink Plated Cs Nut 11 Mm Thick Thread: M 20X1.5,Rectangular Shape Silicon Rubber O-Ring Size: 215 X 245 X 06 Mm As Per Drawing,Power Cylinder Barrel / Drum Having Size: 16 Inch, Height: 115 Mm & Moc: Stainless Steel,Cut Resistence Hand Gloves -Cut& Chemical Jersey-Knitted Cotton Dipped With Nitrile Butadiene Rubber Provided Both Side(Plam & Fingers Side) & Fully Dipped Version,Neoprene Rubber Diaphragm With Reinforced Nylone Canvas Suitable For Chemical Environment In Cpu Plant Control Valve, Od: 415 Mm, Drw No. Diaphragm Dwg-1,Neoprene Rubber Diaphragm With Reinforced Nylone Canvas Suitable For Chemical Environment In Cpu Plant Control Valve, Od: 578 Mm, Drw No. Diaphragm Dwg-1,Neoprene Rubber Diaphragm With Reinforced Nylone Canvas Suitable For Chemical Environment In Dm Plant Control Valve, Od: 235 Mm, Drw No. Diaphragm Dwg-2,Neoprene Rubber Diaphragm With Reinforced Nylone Canvas Suitable For Chemical Environment In Dm Plant Control Valve, Od: 328 Mm, Drw No. Diaphragm Dwg-2,Neoprene Rubber Diaphragm With Reinforced Nylone Canvas Suitable For Chemical Environment In Dm Plant Control Valve, Od: 393 Mm, Drw No. Diaphragm Dwg-2,Neoprene Rubber Diaphragm With Reinforced Nylone Canvas Suitable For Chemical Environment In Cpu Plant Control Valve, Od: 340 Mm, Drw No. Diaphragm Dwg-1,13 Mm Impact Type Hand Drill Machine,Hand Grinder Machine.
