Provision Of Shed For Car Washing And Modern Servicing Garage At Af Stn Thoise Under Ge ( Af ) Thoise
Tender Value
Ref. Documents
Estimated cost
Bid Submission
05 Jul 2022
0 days left
EMD
29070
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
thoise → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Provision Of Shed For Car Washing And Modern Servicing Garage At Af Stn Thoise Under Ge ( Af ) Thoise
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 28-Jun-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 05-Jul-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in post holes (or similar holes) each n exc 0.5 cu.m, getting out, returning, filling in & ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, & removing surplus soil to a distance n exc 50m & making good surface in hard/dense soil complete all as specified and as directed by Engr-in-Charge. |
| 2 | M&L for plain cement concrete type C-2 1:3:6 (40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed by Engr-in-Charge. |
| 3 | S & F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of Fe 410W (Grade E- 250 ) Quality A, including for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts),providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing completeall as specified and as directed by Engr-in-Charge. |
| 4 | S&F 0.63 mm Galvanised, corrugated mild steel sheeting with two corrugations side lap,fixed with coach screws and washers, in roofs, walls etc. with grade of zinc ating 275 with L-type or J-type or cranked hook bolts in lieu of screws complete all as specified and as directed by Engr-in-Charge. |
| 5 | M&L for preparation for new steel Surfaces of any description over 10cm grith or width, not otherwise described, two coat of synthetic enamel paint in comauflauge pattern, over a coat of red oxide zinc primer complete all as specified and as directed by Engr-in-Charge.Note: The pattern of camouflaging shall be approved by GE. |
| 6 | S&F 0.63 mm thick plain Galvanised, mild steel sheeting in ridges, hips, valley gutters, drip, straight flashings (length and girth as fixed)& fixed with L-type or J-type or cranked hook bolts in lieu of screw in roofs, walls etc. with grade of zinc coating 275 etc complete all as specified and as directed by Engr-in-Charge. |
| 7 | S & F Mild steel flat sections Fe-410-W (Gde-E-250 Quality-B, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated), wind ties Complete all as specified and as directed by Engr-in-Charge. |
| 8 | M&L for Forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’ complete all as specified and as directed by Engr-in-Charge. |
| 9 | M&L Cement concrete type B-1, 1:2:4 (20mm graded aggregate) 50 mm thick broom finishing complete all as specified and as directed by Engr-in-Charge. |
| 10 | M & L hardcore of broken stone or boulders of gauge n.exc.63mm,deposited,spread and levelled in layers n exc. 15 cm thick, watered and well rammed to a true surface,complete all as specified and directed. |
AI Tender Summary
Tender Timeline
Jun 28, 2022
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 05, 2022
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedJul 05, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 07, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender