Supply Of Chain And Chain Spares For Auxiliary Cane Carrier Main Cane Carrier Bagasse Carrier Fab Supply Of Chain And Chain Spares For Auxiliary Cane Carrier Main Cane Carrier Bagasse Carrier Fab , Spares For Auxiliary Cane Carrier Chain ( Pitch 150Mm ) As Per Our Drg. No. Scsm-Np-022, Rev-01 , Inside Links ( Item No-1 ) , Material : En-09 , Outside Link ( Item No.2 ) , Material : En-09 , Outside Link, Cut Type ( Item No.3 ) . Material : En-09 , Bush ( Item No.4 ) , Material : En-353 , Pin With M20 Nylock Nut ( Item No.5 ) Material : En-351 , Roller ( Item No.6 ) , Material : En-08 , Ms Slat For Auxiliary Cane Carrier, 150Mm Pitch Chain As Per Drg. No. Scsm / Np-024, Material : Ms : Is : 2062, Finish Weight 18.4 Kgs / Each Approx. , Spares For Main Cane Carrier Chain ( Pitch 200Mm ) As Per Our Drg. No. Scsm-Mills-245 , Outside Link, Cut Type ( Item No.1 ) Material : 55 C8, Is : 1570 - 1979 , Outside Link, ( Item No.1A ) Material : 55 C8, Is : 1570 - 1979 , Inside Link, ( Item No.2 ) Material : 55 C8, Is : 1570 - 1979 , Pin With M25 Nylock Nut ( Item No.3 ) , Material : En-353 , Bush ( Item No.4 ) , Material : En-351 , Roller ( Item No.5 ) , Material : En-8 , M.S. Slat For Main Cane Carrier, 200Mm Pitch Chain As Per Drg. No. Scsm-Mills – 246, Material : Ms : Is : 2062, Finish Weight 25 Kgs / Each Approx. , Spares For Bagasse Carrier Chain ( Pitch 150Mm ) As Per Our Drg. No. Scsm / Np-U-91, Rev.-B , Inside Link ( Item No.1 ) , Material : En-19 , Outside Link ( Item No.2 ) , Material : En-19 , Outside Link, Without Attachment / Cut Type ( Item No.2A ) , Material : En-19 , Outside Link, With Attachment / Cut Type ( Item No.2B ) , Material : En-19 , Roller ( Item No.3 ) , Material : En-8 , Pin With 7 / 8” Bsw Castle Nut ( Item No.4 / 8 ) , Material : En :-353 , Bush ( Item No.5 ) , Material : En-353 , Rack Attachment Pin With M18 Nut ( Item No.6 ) , Material : En-8 , Racks For Intermediate Carrier Fabricated From Ms Plates As Per Drg. No. Scsm-Mills-269, Rev.’C’ , Melon Pad As Per Drg. No. Scsm-Mills-275, Item No.1 , Ms Stopper Plate As Per Drg. No. Scsm-Mills-275, Item No.2 , Block Type Forged Chain Having 229Mm Pitch ( Duly Assembled ) For Main Rake Elevator And Inter Rake Carriers As Per Our Drg. No. Scsm-Mills-310 , Pin With Nylock Nut For Forged Steel Block Type Chain As Per Drg. No. Scsm-Mills-310 , Overhauling Of Block Type Forged Chain As Per Our Drg. No. Scsm / Mills / 310 ( Overhaul ) . M.O.C Should Be Stgrictly As Per Our Drawing With Test Certificate. Main Jobs To Be Carried Out: 1. Removal Of Ovality Of Holes Racks Attachment Pads And Welding Of Broken Pads With Links 2. Replacement Of Worn Out Pins With M30 Nylock Nuts, Washers And Split Pins. 3. Provision Of Both Pin Stopped Pads 4. Fitting Of New Bushes After Removal Of Ovality With Maintaining The Pitch I.E. 229Mm + 0.3, Wall Thickness Of Bushes Should Suit The Pin Diameter. 5. Replacement Of Worn Out Bushes ( Material – Ss: 410 ) - Old Chain Will Be Provided By The Mills ( For Overhauling ) . - Rates Are After Deducting The Value Of Old Material, If Any
