Laying Fixing Of Pipes, Construction Of Sr, Pst, Sluice Chamber, Chowkidar Quarter, Approach Path, Chain Link Fencing And Sump Wss Shahu Sachan
Tender Value
1.64 Crore
Estimated cost
Bid Submission
04 Jul 2022
0 days left
EMD
3.29 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
devsar → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Laying Fixing Of Pipes, Construction Of Sr, Pst, Sluice Chamber, Chowkidar Quarter, Approach Path, Chain Link Fencing And Sump Wss Shahu Sachan
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 25-Jun-2022 | Extention of Date | Date | 29-Jun-2022 |
| 2 | 27-Jun-2022 | Extention of Date 2 | Date | 04-Jul-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: |
| 2 | All kinds of soil |
| 3 | Ordinary Rock |
| 4 | Laying S&S Centrifugally Cast (Spun)/ Ductile Iron Pipes conforming to IS : 8329 including fitting viz. Tees; Bends & other allied accessories and carriage from source up to road site by mechanical transport complete job. |
| 5 | 200 mm dia Ductile Iron Class K - 7 Pipes |
| 6 | 150 mm dia Ductile Iron Class K - 7 Pipes |
| 7 | Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket:- |
| 8 | 200 mm dia pipes |
| 9 | 150 mm dia pipes |
| 10 | laying and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. |
| 11 | 65 mm dia. nominal bore |
| 12 | 50 mm dia. nominal bore |
| 13 | 40 mm dia. nominal bore |
| 14 | 25 mm dia. nominal bore |
| 15 | 20 mm dia. nominal bore |
| 16 | Installation of house connections to unconnected household including providing and fixing of necessary pipe specials, Earth work at connection and Whatever Necessary. |
| 17 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete:- |
| 18 | 15 to 40 mm nominal bore |
| 19 | Above 40 mm nominal bore |
| 20 | Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately). |
| 21 | 50 mm dia. |
| 22 | 80 mm dia. |
| 23 | 100 mm dia. |
| 24 | Providing and fixing MS Flanges to GI pipes including cost of cutting of threaded portion , flanges, welding , nuts ,bolts,Rubber Washer and carriage etc complete job. |
| 25 | 100mm dia. G.I Pipes |
| 26 | 80mm dia. G.I Pipes |
| 27 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: |
| 28 | 1:3:6 or richer mix (i/c equivalent design mix) |
| 29 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with:- |
| 30 | 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 31 | Providing and fixing of sluice valves (with cap) complete with bolts, nuts, rubbers insertions ( the tails piece if required will be paid seperately) confirming to IS 14846 read with latest amendments. |
| 32 | 200 mm dia Sluice valves |
| 33 | 150 mm dia Sluice valves |
| 34 | 100mm diaSluice valves |
| 35 | 80 mm dia /Sluice valves |
| 36 | Removal of trees, surface boulders/ clearance of silt by engaging manual labours. |
| 37 | Earth work in bulk excavation by manual means over areas(exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. |
| 38 | All kinds of soil : |
| 39 | Ordinary Rock : |
| 40 | Extra for every additional lift of 1.5 m or part there of in excavation/banking excavated or stacked material. All kinds of soil. |
| 41 | Providing and laying of dry stone boulder tightly hand picked on horizontal levels |
| 42 | Dry random rubble masonry with hard stone (Quarry) in foundation and plinth: With bond stone. |
| 43 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 44 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses,string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills,fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 45 | Providing and laying in position specified grade of reinforced cement concrete includingcuring but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 46 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement of mix 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 47 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 48 | Reinforced cement concrete work in arches, archribs, domes, vaults shells, folded plate and roofs having slope more than 15° upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 49 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 50 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 51 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above/upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 52 | Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification.(1 kg of water proofing material in 50 kg of cement) |
| 53 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 54 | Foundations, footings, bases of columns etc. for mass concrete. |
| 55 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 56 | Suspended floors, roofs, landings, balconies and access platforms |
| 57 | Edges of slabs and breaks in floors and walls Under 20 cm wide. |
| 58 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 59 | Columns, pillars, piers, abutments, posts and struts. |
| 60 | Arches, domes, vaults upto 6 m span |
| 61 | Extra for shuttering in circular works (20 % of respective quantity):- |
| 62 | Foundations, footings, bases of columns etc. for mass concrete. |
| 63 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 64 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 65 | Extra for dome exceeding 6m span |
| 66 | 12mm Cement plaster finished with a floating coat of neat cement of mix: 1 : 3 ( 1 cement : 3 fine sand). |
| 67 | 12mm Cement plaster of mix 1 : 4 ( 1 cement : 4 fine sand) |
| 68 | 12mm Cement plaster of mix 1 : 6 ( 1 cement : 6 coarse sand) |
| 69 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge. Made of G.I. wire of dia 4 mm. |
| 70 | Structural steel work in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded |
| 71 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 72 | Providing and incorporating (during conc.) GP sheet strips water seal 0.63 mm thick at construction joints including jointing of ends so as to form a continous berries |
| 73 | Providing colour coated corrugated G.S sheet roofing inlcuding vertical/curved surface fixed with poilymner coated J/L hooks, bolts and nuts 8 mm dia with bitumen and GI limpet washers or with GI limpet washers filled with white lead complete (upto any pitch in horizontal/vertical of curved surface) excl. the cost of purlins and including cutting to size and shape wherever required |
| 74 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):First class kail wood |
| 75 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). First class kail wood |
| 76 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : . First class kail wood |
| 77 | Applying priming coat:With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 78 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 79 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 80 | Painting steel work with deluxe multi surface paint ofrequired shade to give an even shade. Two or more coats applied @0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture. |
| 81 | Providing and fixing bright finished brass handles with screw extra comple job 75 mm dia |
| 82 | Providing and fixing of superior quality wall to wall matting as per the direction of engineer incharge including 12 mm polystyreng fom. |
| 83 | Construction of RCC ringtype soakage pitof standardsize &6 mtr depth complete job. |
| 84 | Providing hoisting and fixing trusses , purl;ins, rafter, joints etc. Popular wood |
| 85 | Provision for sanitary fitting and water supply installation viz bib cocks, towel rods, G.I. pipes fitting, PVC disposal pipes, including manhole, mirror, cisterns, commode, 50 litres capacity geyser, sink etc. water stoarge tank tripple layer 1000 litre capacity etc. complete job as per the direction of Engineer in charge. |
| 86 | Provision for sanitary fitting and water supply installation viz bib cocks, towel rods, G.I. pipes fitting, PVC disposal pipes, including manhole, mirror, cisterns, commode, 50 litres capacity geyser, sink etc. water stoarge tank tripple layer 1000 litre capacity etc. complete job as per the direction of Engineer in charge. |
| 87 | Carriage of material from sourse to dumping site at road by mechanical transport 1ncluding loading , unloading and stacking complete. |
| 88 | Cement & steel for avg. lead of10 Km |
| 89 | Sand for avg. lead of 30 Km |
| 90 | 20mm Aggregate for avg. lead of15 Km |
| 91 | 40mm Aggregate for avg. lead of15 Km |
| 92 | Stone solling For avg lead of10 km |
| 93 | Bricks10 Km |
| 94 | 200 mm dia DI pipefor avg. lead of15 Km |
| 95 | 150 mm dia DI pipefor avg. lead of15 Km |
| 96 | 100 mm dia DI pipefor avg. lead of15 Km |
| 97 | 80/65/50/40/25/20/15 mm dia GIpipe |
| 98 | Extra Carriage of pipes material from dumping site upto actual site of work by manual labour for avglead of 500mtrs:- |
| 99 | 200 mm dia DI pipe |
| 100 | 150 mm dia DI pipe |
| 101 | 100 mm dia DI pipe |
| 102 | 80/65/50/40/25/20/15 mm dia GIpipe |
| 103 | Extra Carriage ofmaterial by manual labour from dumping site upto actual site of work . For Avg. lead of 100 mtr:- |
| 104 | Cement |
| 105 | Steel |
| 106 | Sand and 20mm agg. |
| 107 | 40mm Aggregate |
| 108 | Stone solling/quarry stone |
| 109 | Extra Carriage ofmaterial by manual labour from dumping site upto actual site of workfor Avg. lead of 300 mtr:- |
| 110 | Cement |
| 111 | Steel |
| 112 | Sand and 20mm |
| 113 | 40mm Aggregate |
| 114 | Stone solling/quarry stone |
| 115 | Bricks |
AI Tender Summary
Tender Timeline
Jun 27, 2022
11:30 IST
Tender Published
Tender notice published.
Completed
Jun 29, 2022
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 04, 2022
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedJul 04, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 06, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender