Uttar Pradesh Housing And Development Board-UPAVP has published Electrical / Mechanical Work In 50 Bedded Eye Hospital At Ramai Patti Tehsil Sadar District Mirzapur Electrical / Mechanical Work In 50 Bedded Eye Hospital At Ramai Patti Tehsil Sadar District Mirzapur- 1 Wiring point for light with 1.5 sq. mm.FRLS. Submission Date for this Tender is 25-06-2022. Coats and Jackets Tenders in mirzapur Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit partly concealed in the wall and partly laid in slab alongwith the reinforcement before concreting, complete with 1.5 sqmm FRLSH PVC Insulated multistrand copper conductor cable as earth wire drawn inside the conduit with GP Box, modular type switch & ceiling rose/angle/batten holder on 3mm thick phenolic paminated backalite sheet etc complete in all respect as directed including matching colour wash. PWD SOR 2018 SI No 138(C)+187(A) |
| 2 | Wiring point for two way light with 1.5 sq. mm. FRLS PVC insulated multistrand single core copper conductor cable in heavy guage PVC conduit. pipe partly concealed in the wall and partly laid in slab alongwith the reinforcement before concreting complete with 1.5 sq. mm. FRLSH PVC insulated multistrand copperconductor cable as earthwire drawn inside the conduit, GP box and 2No. two way modular type switches and ceiling rose /angle /batten holder on 3 mm. thick phenolic laminated backlite sheet etc. complete in all respects, as directed including matching colour wash.PWD SOR 2018 SI No 139(C) + 187(B) |
| 3 | Wiring point for fan / fresh air fan (light duty exhaust fan) with 1.5 sq.mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting, complete with 1.5 sq.mm.FRLSH PVC insulated multistrand copper conductor cable as earth wiredrawn inside the conduit withmodular type switch & ceiling rose on 3 mm. thick backelite sheet etc., complete in all respect including matching colour wash. PWD SOR 2018 SL No 140(C )+ 187(A) |
| 4 | Wiring point for Call Bell with 1.5 sq. mm. FRLS PVC insulated multistrand single core copper conductor cable in heavy guage PVC conduit. pipe partly concealed in the wall and partly laid in slab alongwith the reinforcement before concreting complete with 1.5 FRLSH PVC insulated multistrand copperconductor cable as earthwire drawn inside the conduit, GP box and modular type bell push or 2 pin shocket etc complete in all respects, as directed including matching colour wash. PWD SOR 2018 SI No 142(C) + 187(E) |
| 5 | Wiring point for plug with 1.5 sq. mm.FRLSH PVC insulated multistrand copper onductor cable in PVC Conduitpartly concealed in wall and partly laid in slab alongwith the reinforcement before concreting, complete with 1.5 sq.mm.FRLSH PVC insulated multistrand copper conductor cable as earth wiredrawn inside the conduit and modular type switch and socket etc., complete in all respect including matching colour wash.PWD SOR 2018 SL No 141(C )+ 187(A) |
| 6 | Supply and wiring of submain with two number 2.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2mm thick) PVC conduit partly laid in slab alongwith the reinforcement before concreting and partly concealed in wall with 1 nos. 1.5 sq. mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable as earth continuity wire drawn inside the conduit complete in all respect. including matching colour wash. PWD SOR 2018 SL No 1307(C ) |
| 7 | Supply and wiring of submain with two number 4 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2 mm thick) PVC conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting with one no. 2.5 sq. mm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire drawn in conduit including matching colour wash etc. complete in all respect. PWD SOR 2018 SL No 221(C ) |
| 8 | Supply and wiring of sub main with two number 6.0 sq.mm FRLSH PVC insulated 1100 V grade multstrand single core copper conductor cable in 20 mm dia heavy duty(2mm thick) PVC conduit partly concealed in wall and partly laid in slab along with reinforcement before concretiing with 1 no. 4.0 sq.mm. FRLSH PVC insulated multstrand copper conductor cable as earth continuity wire drawn iin conduit including matching colour wash. Complete in all respect PWD SOR 2018 SI No 222(C) |
| 9 | Supply and wiring of 4 number 6 sq. mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 32 mm dia heavy duty (2mm thick) PVC conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting with 2 nos 4 sq.mm. FRLSH PVC insulated copper conductor cable as earth continuity wire drawn in conduitincluding matching colour wash etc. complete in all respect..PWD SOR 2018 SL No 277(C ) |
| 10 | Supply and wiring of 4 number 10 sq. mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 32 mm dia heavy duty (2mm thick) PVC conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting with 2 nos 6 sq.mm. FRLSH PVC insulated copper conductor cable as earth continuity wire drawn in conduitincluding matching colour wash etc. complete in all respect..PWD SOR 2018 SL No 278(C ) |
| 11 | Supply and wiring of sub main with 4 number 16.0 sq.mm FRLSHPVC insulated 1100 V grade multstrand single core copper conductor cable in 40mm dia PVC conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting with two number 10 sq.mm. RLSH PVC insulated copper conductor cable as earth continuity wire drawn in conduitincluding matching colour wash etc. complete in all respect. PWD SOR 2018 SI No 279 (C) |
| 12 | Supply and fixing hexagonal/Round G.P. fan box of approved make made up of 1.0 mm thick ISI Marked G.P. sheet spot welded Four to Eight holes of 25.4 mm for pipe entry of the box. Holes should be semi-shuttered type with 0.5 mm G.P. Sheet made upper & lower cover duly screwed fitted with 300 mm round Zink coated M.S Bar X 12 mm & brand name should be embossed. Fixing with wiring conduit laid in the R.C.C. roof before concreting along with supply of all material, labor, T&P etc. required for proper completion of the work .PWD SOR 2018 S.I.No. 1149 |
| 13 | Supply and fixing of LED Tube Light with metal heavy duty box type batten light fitting 1 X 22 watt suitable for upto 1x22 watt LED polycarbonate tube light complete including tube suitabe for both surface & suspended complete in all respect. 2420 system lumens, 110Lm/watt PF>0.95, THD<10% CRI>80, Sheet Thicknes 0.8mm, Tube with aluminium heat with 5 year warrantee. PWD SOR 2018 SL No 1413 CAT-AAA |
| 14 | Supply and fixing of LED Tube Light with metal heavy duty box type batten light fitting 2X 22 watt suitable for upto 2x22 watt LED polycarbonate tube light complete including tube suitabe for both surface & suspended complete in all respect. 2420 system lumens, 110Lm/watt PF>0.95, THD<10% CRI>80, Sheet Thicknes 0.8mm, Tube with aluminium heat with 5 year warrantee. PWD SOR 2018 SL No 1414 CAT-AAA |
| 15 | Supply and fixing of recess/Surface mounting round 24 watt to 32 watt cut out min 150 mm Height Min 40 mm, LED Down Lighter having powder coated die cast aluminium housing with heat sink diffuser/reflector and driver set suitable for 24 Hr continuous operation, compelete in all respect. PWD SOR 2640-3520 system lumens, 110Lm/watt PF>0.95, THD<10% at full load, CRI>80, with 5 year warrantee. SI no. 1405 Cat-AAa |
| 16 | Supply and fixing of water tight oblong 10 Watt LED bulkhead luminaire with driver set confirming to IP 65 and above Protection . complete in all respect. Si No. 1417 Cat-AAA |
| 17 | Supply and fixing of 36 Watt to 46 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect.PWD SOR 2018 S.I.No. 1406 CAT A |
| 18 | Supply and erection of 300 mm Sweep AC 230/250 Volts, 50 Hz Exhast fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required connection etc. complete as required MR |
| 19 | Supply and erection of 400 mm Sweep AC 230/250 Volts, 50 Hz wall fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required connection etc. complete as requiredMR |
| 20 | Supply and fixing of electronic fan regulator (Modular) 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer in charge of work. PWD SOR 2018 S.I.No. 1203 (C ) |
| 21 | Supply and Erection of Ceiling Fan with motor of AC Permanent insulation, capacitor rating conforming BEE 5 Star rating and IS:374/79 and also comply with IS: 1709/ 1984 with latest amendment. The rated voltage 220/240 Volts, 50Hz 1-Ph AC the fan assemble should consists of down rod, blades, shackle, canopies etc and with double ball bearing system .PWD SOR 2018 SI No 1501+ 1115 BEE 5 Star rated- 1200 mm sweep |
| 22 | S/F of 3mm thick bakelite sheet cover round/hexagonal Type for fan box complete with all material, Labour T&P as per direction of E/I. |
| 23 | S/F of 3mm thickAl. Sheet junction box cover complete in all material labour T&p as per direction of E/I. |
| 24 | Supply and fixing of surface/ Flush mounting 8 way TPN distribution Board with additional metal door without MCB complete in all respect and directed at site by E/I. PWD SOR 2018 SI No 1027(A)CAT-A |
| 25 | S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve PWD SOR 2018 SI No 1002 CAT-A |
| 26 | S&F of 63 Amp. 4 Pole MCB (10 KA) C Curve PWD SOR 2018 SI No 1020 (A) |
| 27 | Supply and fixing of power plug with 20 Amp./250 voltflush type modular switch and 5 pin 20 A/250 volt flush type universal modular socketswitch on concealed M.S boxincluding supply of all material, labour T&P etc. required for proper completion of work. PWD SOR 2018 SI No 1139(A) |
| 28 | S & F sheet steel enclosure surface / Flush mounting fitted with 30Amp. 2Pin and earth metal clad scraping earth plug and socket complete in all respect. as directed at site byEngineer in charge.1031 (A) |
| 29 | S & F surface/Flush mounting 4ways V TPN distribution board with additional metal door without MCB complete in all respect,as directed at site by Engineer in charge.PWD SOR 2018 SI No 1026 (C ) |
| 30 | S&F of 80 to 100 Amp 4 pole MCCB (16 KA) Thermal Magnetic releasePWD SOR 2018 SI No 1021 |
| 31 | Supply and burring of Safe Earthing Electrode T-39 Zn Zinc Coated, Length 3000mm, outer pipe 76.3mm x 3.2 inner pipe 42.4mm x 2.6mm, terminal Dia 12mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame with hinged cover & masonry housing. (From electrode terminal to switch board, cost of 25 x 3 G.I. Strip will be extra Make: As approved in U.P. P.W.D., & C.P.R.I. Certified PWD SOR 2018 SI No 726 (D) |
| 32 | Supply and laying of 25 mm x 3 mm G.I srtip form earth electrode directly in the ground as required complete in all respects. PWD SOR 2018 SI No 716 |
| 33 | Supply and laying of 32 mm x 6 mm G.I. strip from earth electrode directly in the ground as required complete in all respect. PWD SOR 2018 SI No 717 |
| 34 | Providing, laying and fixing 80 mm dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required. DSR 2018 SI No 18.12.8 |
| 35 | Supplyandlayingof aluminiumconductorPVCinsulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. PWD SOR 2018 SI No 501 |
| 36 | 10 Sqmm 4 core |
| 37 | 16 Sq mm 4 Core |
| 38 | 70 Sq mm 3.5 Core |
| 39 | 95 Sq mm 3.5 Core |
| 40 | 240 Sq mm 3.5 Core |
| 41 | Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring ofthe cable shall be properly connected with the earth as per direction of Engineer-Incharge.PWD SOR 2018 SI No 503 |
| 42 | 10 Sqmm 4 core |
| 43 | 16 Sq mm 4 Core |
| 44 | 70 Sq mm 3.5 Core |
| 45 | 95 Sq mm 3.5 Core |
| 46 | 240 Sq mm 3.5 Core |
| 47 | Supply and fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection etc. complete in all respects as per direction of the Engineer incharge.PWD SOR 2018 SI No 504 |
| 48 | 10 Sqmm |
| 49 | 16 Sq mm |
| 50 | 35 Sq mm |
| 51 | 50 Sq mm |
| 52 | 70 Sq mm |
| 53 | 95 Sq mm |
| 54 | 120 Sq mm |
| 55 | 240 Sq mm |
| 56 | Supply and fixing of call bell of approved make on polished MDFEG / Teak ply board including making connections etc. complete in all respect. PWD SOR 2018 SI No 1101 |
| 57 | Supply of Franklin france make advanced piezoelectric Exciter Device Based lighting protection system suitable for protection of building against direct lightning strike complete with ealy streamer emission with piwezoelectric device for corona effect) stainlles steel lighting conductor air terminal with event counter with sensitivity 1 KA to 100 KA for 8.20 micro second impulse for 1 KA control over the release of ions-positive or negative without additional power supplies requirement required complianece with IP53 enclosures) |
| 58 | Saint Elmo lightening conductor with discharge counter (sensitivity 1 KA, 8/20 microsecound with IP 53 Enclosures) |
| 59 | Elevation Rod : 2M. AFC2001 Two elevation rods for are required for mounting a one lightening conductor MR |
| 60 | Installation of Franklin france make external Lightening protection system. |
| 61 | Supply and fixing of vertical down conductor of 32mm x 6mm G.I. strip etc. on approved clamps on surface for lightning conductor complete in all respects (for two storeyed Buildings).P.W.D.S.O.R. 2018 S.I. No.713( C) |
| 62 | Supply and fixing of testing joint of G.I. strip 32mm x 6mm and 150mm long with G.I. bolts and nut etc. complete in all respect.P.W.D.S.O.R. 2018 S.I. No.719 |
| 63 | Supplying and fixing following modular switch/ socket on theexisting modular plate & switch box including connections but excluding modular plate etc as required. (i)Telephone socket outlet DSR No 1.24.6 |
| 64 | Supply and fixing of G.P. Modular switch box for 1 / 2 Module of approved make made up of 1.0 mm thick ISI Marked G.P.sheet including adjestable Nakka and holes plugged with PVC Nylon Caps . Two or more holes for pipe entry of 25.4 mm on upper and lower sides of the box. Holes should be semi-shuttered type and fitted with heavy brass Earth Piller duly screwed & brand name should be embossed. Box flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with s/o all materials, labour and T&P required for proper completion of work as directed at site by the Engineer in charge. P.W.D.S.O.R. 2018 S.I. No.1152(A) (i) 1 or 2 Module (75mm X 75 mm) |
| 65 | Supplying and drawing telephone wire following pair 0.5 sqmm FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/recessed steel/PVC conduit as required. DSR No 1.18.2 2 Pair |
| 66 | Supply and fixing and concealing of 20 mm dia. 2mm thick PVC conduit pipe with ISI mark embossed and with PVC accessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin / adhesive to make the complete piping rigid, plastering with cement sand mortar finished to the level with matching colour wash including cost of all material labour and T&P etc required for proper completion of the work as per directions and to the satisfaction of Engineer in charge. SOR 2018 Si No. 148(A) |
| 67 | Supply and laying of 1800mm x 900mm x 12mm thick chequered rubber matting of tested quality SOR 2018 Si No. 1136 |
| 68 | Fire Fighting System Providing, laying, testing & commissioning of "C" class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : DSR & AOR 2019 SI No 7 |
| 69 | 150 mm dia |
| 70 | 100 mm dia |
| 71 | 80 mm dia |
| 72 | 65mm dia |
| 73 | 32mm dia |
| 74 | 25 mm dia |
| 75 | Providing laying, testing & commissioning of "C" class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. DSR & AOR 2019 |
| 76 | 150 mm dia SI No 6.2 |
| 77 | Supplying,fixing, testing and commissioning of Manual Swing TypeHose Reel IS:444 complete with heavy duty reel, 20 mm dia. X 30 Mtr long, PVC pressure hose pipe , Red Coloured, SS jet nozzel, 25mm. isolating valve and all other neccessary fixing accesories complete in all respect. DSR No 17:1 |
| 78 | Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : as per DSR & AOR 2019 S.I. No. 9.1 |
| 79 | Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : DSR & AOR 2019SI No. 18.1 |
| 80 | Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : DSR & AOR 2019 SI.No.16.1 |
| 81 | Providing and fixingHose Box (600x300x200)size of suitable size made out of 16/18 SWG thick having central opening and 4 mm thick glazed glass Double door including necessory rubber beading key pocket, handle locking arrengment painting with polyurethene based red paint etc. The words "FIRE HOSE" to be painted on the dooor as per approved drawing complete in all respect. MR |
| 82 | Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : |
| 83 | 2 way - 100 mm dia M.S. Pipe SI No. 19.1 |
| 84 | Supply, fixing, testing and commissioning of 25mm Ball Valve complete. MR |
| 85 | Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required. DSR & AOR -2019 SI No. 20 |
| 86 | Supplying, installation, testing and commissioning of electric driven Main Fire pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Main Fire Pump) (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 (b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-"F" insulation, conforming to IS-325. (c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. (d) Suitable cement concrete foundation duly plastered and with anti vibration pads.Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.1620 lpm at 70 m Head DSR & AOR2019 SI No. 1.8 |
| 87 | Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump)Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads.Make :- Kirloskar/ other Standard make.DSR No. 2.8 1620 lpm at 70 m Head |
| 88 | Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) a) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520. b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-"F" insulation, conforming to IS : 325. c) M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. Make Kirloskar/other standard make DSR NO. 3.2 180 lpm at 70 m Head |
| 89 | Supplying, installation, testing and commissioning of electric driven terrace pump suitable forutomatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-"F" insulation, conforming to IS-325. (c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. (d) Suitable cement concrete foundation duly plastered and with anti vibration pads. 450 lpm at 35 m Head |
| 90 | Automatic Control Panel(s) Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter connection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required : INCOMING 250A, 50kA 4 Pole MCCB, Ics=100% Icu rating Digital Voltmeter 0-500V with selector switch Digital Ammeter (0-250 A) with selector swtich & CTs etc. Outgoing Main Fire Pump : 125 A 50KA TPN MCCB Jockey Pump : 63 A , 50KA TPN MCCB, Diesel Engin Control Complete in All Respect DSR NO. 5.1 |
| 91 | Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. DSR & AOR-2019 SI No. 22 |
| 92 | Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required DSR-2018 SI No. 16.8 |
| 93 | SITC of foot valves with strainer at the suction pipe of fire pumps (in case of negative suction only). Make Kalpana/KartarSir/Advance or Equivalent |
| 94 | 150mm dia |
| 95 | 100mm dia |
| 96 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : DSR & AOR -2019 SI No 11 |
| 97 | 150 mm dia |
| 98 | 100 mm dia |
| 99 | 80 mm dia |
| 100 | Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : DSR & AOR2019 SI No. 14 |
| 101 | 150 mm dia |
| 102 | 100 mm dia |
| 103 | Supply and fixingof C02 type fire extinguisher 4.5 kg. capacity (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labourfor proper completionof work.PWD SOR 2018 SI No 1132 |
| 104 | Supply and fixingof fire extinguisher,ABC Type 6.00 kg. capacity(ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labourfor proper completionof work.PWD SOR 2018 SI No 1131(A) |
| 105 | Supply and fixing of self glow type exit sinage. |
| 106 | SITC ofSprinkler 68° deg, complete in all respects. (Make:- OMEX/ Life Guard/Safex) DSR 2019 Si No. 21.1 Pendent Type |
| 107 | Fire Alarm System Work Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card,minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications. DSR 2018 SI No 17.2.1.1 Two Loop Panel. |
| 108 | Supplying, installation, testing & commissioning of intelligent analog addressable photo thermal detector complete with mounting base complete as required. DSR 2018 SI No 17.2.4 |
| 109 | Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required.DSR 2018 SI No 17.2.5 |
| 110 | Supplying, installation, testing & commissioning of addressable phone control module complete as required. DSR 2018 SI No 17.2.11 MakeINNEL/SIMPLEX/TYCO |
| 111 | Supplying, installation, testing & commissioning of addressable manual call point complete as required. DSR 2018 SI No 17.2.14 |
| 112 | Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required. DSR 2018 SI No 17.2.15 |
| 113 | Supplying, installation, testing & commissioning of addressable fire control module complete as required. DSR 2018 SI No 17.2.10 |
| 114 | Supplying, installation, testing & commissioning of faultisolator complete with base as required. DSR 2018 SI No 17.2.7 |
| 115 | Supplying, installation, testing & commissioning of repeater panel wih 320 character/ Touch screen LCD display with inbuilt reset ackowledge and silence switches complete as required.DSR 2018 SI No 17.2.3 |
| 116 | Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.. DSR 2018 SI NO. 17.5.2 |
| 117 | Supplying, installation, testing & commissioning of 6 zone,voice alarm controller with USB, MP3 player (including 6 zonebutton paging station) with seamless integration facility withmain fire alarm panel for voice evacuation complete asrequired DSR-2018 SI.No.17.3.1 |
| 118 | Supplying, installation, testing & commissioning of 1.5/3/6W metal box ceiling/wall speakers complete as required.DSR-2018 SI.No.17.3.3 |
| 119 | Supplying, installation, testing & commissioning of digital audio amplifier 50 Watt, 25V rms operating at 240 volt AC supply complete as required.DSR-2018 SI.No.17.3.6 |
| 120 | Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with microphone assembly complete as required.DSR-2018 SI.No.17.3.9 |
| 121 | Tubewell work Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart! bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. DSR-2019 SINo. 23.1.1 |
| 122 | 350 mm dia upto 60 MSINo. 23.1.1.2 |
| 123 | 60-90 MSI No. 23.1.1.1 |
| 124 | 90-150 MSI No. 23.2.1.1 |
| 125 | Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of required dia, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge. DSR-2019 si No. 23.10 |
| 126 | 150 mm nominal size dia having minimum wall thickness 5.00 mm SI No. 23.10.2 |
| 127 | 200 mm nominal size dia having minimum wall thickness 5.40 mm SI No. 23.10.3 |
| 128 | Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed / plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mru, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fitting & accessories, all complete, for all depths, as per direction of Engineer -in-charge. DSR-2019 SI No. 23.11 150 mm nominal size dia SI No. 23.11.2 |
| 129 | Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assemblv of tube well as oer IS:2800 (Dart n.DSR-2019 SI No. 23.15 150 mm dia SI No. 23.15.2 |
| 130 | Providing and fixing M.S. clamp of required dia to the top of casing! housing pipe of tube well as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. DSR-2019 SI No. 23.14 (i) 200 mm clamp SI No. 23.14.3 |
| 131 | Supplying, filling, spreading & leveling" gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of" Engineer-in-charge. DSR-2019 SI No. 23.6 |
| 132 | Development of tube well in accordance with IS : 2800 (part 1) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, ilc disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer- in-charge DSR-2019 SI No. 23.12 |
| 133 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing! casing pipe, rmovable as per requirement, all complete for borewell of: DSR-2019 SI No. 23.13 200 mm dia SI No. 23.13.3 |
| 134 | 500 LPM 52 M head of K S B make Submersible Pumping Plant SITC submersible pump set suitable for clear and cold water with bronze impellers and built-in non return valve and suitable to run on 400 volts, 3 phase 50 Hz A.C. supply at 2900 RPM (nominal) speed and complete with 3 mts. Submersible cable. |
| 135 | SITC of sheet steel fabricated cubical type wall mounting type panel with front opening door. The panel will be complete with internal wiring and will have 3 nos. instruments fuses and 3 nos. toggle switches. |
| 136 | Main piping and valves (01 no CI DF reflux valve, 02 no CI DF Sluice valve, 01 no CI DF Bend, 01 no Enlarger of necessary size, if required, 01 no CI AF tee, 01 no CI DF pipe 1.0 mt long, 02 nos MS DF Pipe 1.5 mt long, 30 mts MS column pipe flanged type in lenghts of 3.0 mts each, 02 pairs column pipe clamps) |
| 137 | Pressure & Depth gauge (01 no 100 mm dial size pressure gauge feibiq make, 01 no 100 mm dial size depth gauge feibiq make, 01 no Control cock for pressure gauge, 35 mts. Steel air line with sockets, 01 sets Union joints, Schraeder valve, hand air pump and gauge board etc.) |
| 138 | Lifting tackle Indef make spur geared lifting tackle of capacity 02 tonnes tested to 03 tonnes with load and hand chain for 4.5 mts lift. |
| 139 | Special tools and spanners (01 no wooden tool board with L hooks, 01 no Hammer with handle, 01 set DE spanners consisting of 06 pcs, 02 nos screwdrivers, 01 no 350 mm size pipe wrench, 01 no combination plier) |
| 140 | Installation of one complete pump set with switchgear material, main piping and valves and do the power wiring work. |
| 141 | Commissioning of one pumping plant as and when the department arranges the power connection at the site. |
| 142 | Painting of the switchgear material and delivery pipes and special inside the pump house with 02 coats of enamel paints. |
| 143 | Testing of the pump at site and the test will be subject to tolerences as provided in the relevant ISS. |
| 144 | Chlorinator Supply of Aquas make electronic Chlorinator of 6LPH capacity complete accessories and 100 Ltr, PVC solution tank. |
| 145 | Installation charges (1/2" socket fixed in pipe line to provide by the department, |
| 146 | Street Light Supply and fixing of 7.0 meter long G.I. Octogonal pole top dia 70 mm bottom dia 130 mm andbase plate 12 mm thick having3 mm thickness with single arm braclet (1 meter length ) on RCC foundatoion including the cost of foundation ,foundation bolts, excavation & baack filling and Required T&P complete fn all respect PWD SOR 2018 S.I. No 641 |
| 147 | Supply and fixing of LED street light fitting having dia cast aluminium body and diffuser with driverset suitable for 75 to 90 Watt. Confirming to IP 65 and above Protection complete in all respect. PWD SOR 2018S.I.No. 1423 Cat- AAA |
| 148 | Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required 80 mm dia SOR Aligarh 2020 |
| 149 | Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors , HRC fuses, isolatingswitch metering intrument & instrument box with CTs etc. in case of tpn, comp;ete in all respect PWD SOR 2018 S.I.No. 807 40 A TPN |
| 150 | Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respect. PWD SOR 2018 S.I.No. 716 |
| 151 | Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I . strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. PWD SOR 2018 S.I.No. 725 (A) |
| 152 | Solar Water Heater Special System features Evacuated tube collector No.-Pressurized Tank GI tank with special passivation coating & magnesium anode to prevent corrosion Inner tank with 100 mm PUF insulation including cost of GI frame structure, earthing and other required civil work complete all respect as per direction of E/I. |
| 153 | Solar Power system including cost of GI frame structure, earthing and other required civil work complete all respect as per direction of E/I. |
| 154 | Main LT Panel: Design, Manufacturing, Supply Installation, Testing & Commissioning of LT switchgear panels suitable for 433 V, 3 phase, 4 wire, 50 Hz power distribution system. The panel shall be Indoor, free standing, floor mounting, sheet metal clad, cubicle, dead front, dust and vermin proof type compartmentalised design fabricated out of 14 SWG CRCA sheet steel, complete with colour coded, heat shrinkable PVC insulated, aluminium bus bars and separate earth bus bar of adequate cross section through out the length of the panel. The incoming and outgoing feeders shall be accommodated in a fully segregated, modular multitier arrangement with adequate size and distinct cable alley, bus bar alley/chamber. The panel shall be complete with name plate, earthing, numbering, danger plate etc. as required and as per specifications and drawings. The panel shall withstand the fault level of 25kA as per Single Line Diagram. a) 1 No. Incoming 320A FP 35kA MCCB with with O/C, S/C& E/F Release, , Spreaders & Extended Roary Handle along CT, Metering, compelete with all fuses wiring etc and. For 160kVA CSS Incomer.b) 1 Nos. Outgoing 160A 25kA TP MCCB with extended RHOM along with O/C & S/C Protection, along with Ammeter with Ammeter Selector Switch, CT etc.c) 1 Nos. Outgoing 125A 25kA TP MCCB with extended RHOM along with O/C & S/C Protection, along with Ammeter with Ammeter Selector Switch, CT etc. c) 8 Nos. Outgoing 63A 25kA TP MCCB with extended RHOM along with O/C & S/C Protection, along with Ammeter with Ammeter Selector Switch, CT etc. |
| 155 | Emergency cum AMF panel Design, Manufacturing, Supply Installation, Testing & Commissioning of Emergency cum AMF Panels suitable for 433 V, 3 phase, 4 wire, 50 Hz power distribution system. The panel shall be Indoor, free standing, floor mounting, sheet metal clad, cubicle, dead front, dust and vermin proof type compartmentalised design fabricated out of 14 SWG CRCA sheet steel, complete with colour coded, heat shrinkable PVC insulated, aluminium bus bars and separate earth bus bar of adequate cross section through out the length of the panel. The incoming and outgoing feeders shall be accommodated in a fully segregated, modular multitier arrangement with adequate size and distinct cable alley, bus bar alley/chamber. The panel shall be complete with name plate, earthing, numbering, danger plate etc. as required and as per specifications and drawings. The panel shall withstand the fault level of 25kA as per Single Line Diagram. |
| 156 | a) 1 No. Mains supplyIncoming 125A TP 25kA MCCB with O/C & S/C Release, CT, Metering, compelete with all fuses wiring etc. b) 1 No. DG supplyIncoming 125A TP 25kA MCCB with O/C & S/C Release, CT, Metering, compelete with all fuses wiring etc. Logic Control Wiring with required Relays, Timers etc. with Trickle/Boost Battery Charger with DC Ammeter & Voltmeter etc. compelete with all fuses wiring etc and. c) 2 Nos. Outgoing 100A 25kA TP MCCB with extended RHOM along with O/C & S/C Protection, along with Ammeter with Ammeter Selector Switch, CT etc. d) 6 Nos. Outgoing 63A 25kA TP MCCB with extended RHOM along with O/C & S/C Protection, along with Ammeter with Ammeter Selector Switch, CT etc. e) 4 No. Outgoing 40A 25kA TP MCCB with extended RHOM along with O/C & S/C Protection, along with Ammeter with Ammeter Selector Switch, CT etc. |
| 157 | APFC Panel Design, Manufacturing, Supply Installation, Testing & Commissioning of LT APFC Panel as under suitable with Incomer Bus Bar for 433 V, 3 phase, 4 wire, 50 Hz power distribution system. The panel shall be Indoor, free standing, floor mounting, sheet metal clad, cubicle, dead front, dust and vermin proof type compartmentalised design fabricated out of 14 SWG CRCA sheet steel, complete coded, heat shrinkable PVC insulated, aluminium bus bars and separate earth bus bar of adequate cross section through out the length of the panel. The incoming and outgoing feeders shall be accommodated in a fully segregated, modular multitier arrangement with adequate size and distinct cable alley, bus bar alley/chamber. The panel shall be complete with name plate, earthing, numbering, danger plate etc. as required and as per specifications and drawings. The panel shall withstand the fault level of 25kA. The Panel shall be completed in all respect as per below mentioned BOQ and. a) 100kVAr 10 stage with 160A TP, 25kA MCCB Incomer with Metering &Individal MCB/MCCB for Feeder Protection alongwith Microprocessor Based APFC Relay |
| 158 | Normal Floor Vertical TPN DB (Double Door) Supply Installation, Testing & Commissioning of Normal VTPN DB suitable for 433 V, 3 phase, 4 wire, 50 Hz. The DB shall be Indoor Double Door type, sheet metal clad, cubicle, dead front, dust and vermin proof fabricated out of CRCA sheet steel, complete with colour coded, bus bars and separate earth connection of adequate capacity. The incoming and outgoing feeders shall be accommodated in a fully segregated, modular multitier arrangement with adequate size and distinct cable box/ alley. The DB shall be complete with name plate, earthing, numbering, danger plate etc. as required and as per specifications and drawings. The panel/ DB shall withstand the fault level of 10kA as per Single Line Diagram. |
| 159 | Stilt Floor Vertical TPN DB-4 Way (Double Door) - Normal Supply SOR 2018 SI No. 1026(C ) +1021+1016 a) 1No. Incoming 63A (16kA) FP MCCB b) 4 Nos. Outgoing 40A TP MCB (10kA) |
| 160 | First &Fourth Floor Vertical TPN DB-6 Way (Double Door) - Normal Supply a) 1No. Incoming 63A (16kA) FP MCCB b) 5 Nos. Outgoing 40A TP MCB (10kA) SI no. 1027 (C )+102+1016 |
| 161 | Second Floor Vertical TPN DB-8 Way (Double Door) - Normal Supply a) 1No. Incoming 63A (16kA) FP MCCB b) 5 Nos. Outgoing 40A TP MCB (10kA) SI No.1028 © +121+1016+101 c) 3 Nos. Outgoing 32A TP MCB (10kA) |
| 162 | Third Floor Vertical TPN DB-6 Way (Double Door) - Normal Supply a) 1No. Incoming 63A (16kA) FP MCCB b) 1 No. Outgoing 50A TP MCB (10kA) c) 5 Nos. Outgoing 40A TP MCB (10kA)SI no. 1027 (C )+1021+1017+1016 |
| 163 | Emergency Floor Vertical TPN DB (Double Door) Supply Installation, Testing & Commissioning of Emergency VTPN DB suitable for 433 V, 3 phase, 4 wire, 50 Hz. The DB shall be Indoor Double Door type, sheet metal clad, cubicle, dead front, dust and vermin proof fabricated out of CRCA sheet steel, complete with colour coded, bus bars and separate earth connection of adequate capacity. The incoming and outgoing feeders shall be accommodated in a fully segregated, modular multitier arrangement with adequate size and distinct cable box/ alley. The DB shall be complete with name plate, earthing, numbering, danger plate etc. as required and as per specifications and drawings. The panel/ DB shall withstand the fault level of 10kA as per Single Line Diagram. |
| 164 | Stilt, Floor Vertical TPN DB-4 Way (Double Door) - Emergency Supply a) 1No. Incoming 40A (16kA) FP MCCB b) 4 Nos. Outgoing 32A TP MCB (10kA)SI no. 1026 (C )+1021+1013 |
| 165 | First, Second, ThirdFloor Vertical TPN DB-8 Way (Double Door) - Emergency Supply a) 1No. Incoming 63A (16kA) FP MCCB b) 2 Nos. Outgoing 40A TP MCB (10kA) c) 4 Nos. Outgoing 32A FP MCB (10kA)SI no. 1028 (C )+1021+1016+1013 |
| 166 | Fourth Floor Vertical TPN DB-6 Way (Double Door) - Emergency Supply a) 1No. Incoming 40A (16kA) FP MCCB b) 5 Nos. Outgoing 32A TP MCB (10kA)SI no. 1027 (C )+1021+1013 |
| 167 | 11KV Switch Gear (Incoming cum Outgoing VCB Panel) Supply of Single Panel (Incoming cum Outgoing) set 11KV, 500MVA indoor type metal clad floor mounted vermin proof horizontal drawout fully interlocked vertical/Horizontal isolation vacuum circuit breaker panel board fabricated out of minimum 2mm thick CRCA sheet as per specifications. The panel shall be complete with all accessories / fitting / wiring like insulated copper Busbar, cable termination boxes suitable for upto 3C x 300 Sqmm XLPE armoured, aluminium conductor cable for incoming and outgoing feeder, foundation bolts etc. complete as required and as specified below :- Incoming cum outgoing : 1 set (Each Consisting of) |
| 168 | One (1) Nos. 11KV 630 Amps. 500MVA, 26.3kA for 3sec. Electrically/ manually operated draw out type vacuum circuit breaker complete with trip free spring charged closing mechanism, necessary auxiliary relays, control switches, emergency hand trip devices and mechanical ON / OFF indicator etc. One (1) Multifunction Meter showing all Electrical Paramaterie Volt, Ampere, kw, kVA, P.F., kWH etc. One (1) digital type ammeter with 11kV Cast resin CTs for metering (50/25 /5-5A, CL1, 15VA) with ASS and 2 Amp SP MCB. One (1) voltmeter (0-15KV) with VSS. One (1) Set of phase indication lamps with 2Amp SP MCB for protection (Red, Yellow and Blue). One (1) set of Red/ Green indicating lamp for close and open position. One (1) No. amber indicating lamp for auto trip. One (1) No. clear indicating lamp for trip circuit healthy. One (1) blue indicating lamp for spring charged. One (1) strip heater to prevent absorption of moisture. One (1) set of 3 O/C + 1E/F (with High Set) Neumerical Relay with 3 Nos. 11kV Resin Cast CTs 50/25/5-5A, CL 10P10, 15VA. Master Trip Relay. Trip circuit supervision relay One (1) No. Potential Transformer 11KV/v3/110/v3 100VA burden One (1) set of 3Element 24V DC Aux. Relay with H/R flag for tripping of Transfomer Fault ie. OTI, WTI & Buchholz Tripping. One (1) set of 3Element 24V DC Aux. Relay with H/R flag for Alarm of Transfomer Fault ie. OTI, WTI & Buchholz Alarm. One (1) set of 8 Stage 24V DC Annunciator with builtin test/Accept/ Reset Push Button along with 24V DC Hooter. Master Trip Relay. 12 Window Annunciator Auxiliary switch/relay, master trip, anti pumping relay Trip circuit supervision relay and other control relays etc. as per requirements. Power Pack : One (1) Set 230V A.C, / 24V DC, 42AH Battery Backup, Power Pack to operate atlease 3Nos. Operation without AC Supply. |
| 169 | 125 kVA 11kV / 0.415kV TRANSFORMER: Design, manufacture, supply, installation, testing and commissioning of 11kV/0.415kV, 125KVA Transformer with percentage impedance 5% (Approx.) (without negative tolerance), 3 phase, 50 Hz delta/star connected, outdoor, oil filled, ONAN type transformer, complete with all fittings such as marhslling Box thermometers (OTI), WTI, Buchholz relay, Off Load Tapp Changer with + 5 % to –12.5%, tapping at the step of 2.5% bi-directional roller, diagrams & rating plate & Winding temperature indicator, oil temperature indicator, lifting lugs, H. T. cable box/ LT Cable Box suitable for Termination of Cable. transformner shall confirm to Latest IS : 1180 Energy Efficiensy Level-I Including Making of RCC Foundation of Size suitable for 125kVA Transformer.complete in all respect. |
| 170 | Supply and laying of 3 core standered aluminium conductor XLPE (Cross linked polyethylene) insulated PVC bedded, Galvanised flat steel strip armoured cables confirming to I.S. 7098 (Part-II with latest amendments) II KV grade at a depth of 900 mm below ground level over a cushion of 100 mm thick fine river sand all around and protected with well burnt bricks on sides and on top put across. The armouring of cable shall be properly connected with earth conductor by clamps etc. PWD SOR 2018 SI No. 506 70 sq. mm 3 core |
| 171 | supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required DSR 2018 SI No. 10.4.1 70 Sqmm |
| 172 | Supply of 62.5 KVA Three Phase Silent DG Set comprising of Cummins make engine model 4BTAA3.3-G11 developing 84 BHP and 62.5 KVA, 415 V Stamford make alternator mounted on a common base, complete with Fuel tank, Batteries and leads, Residential Silencer, standard panel, First fill of lube oil, AVM Pads, Acoustic Enclosure |
| 173 | AMF Panel Suitable for 62.5 KVA DG set |
| 174 | PCC Foundation mixing ratio 1:2:4 Cement, Morang, Concrete Suitable size of DG set |
| 175 | GI Pipe Chemical Earthing 50x3000mm complete with Back Filled Compound |
| 176 | Installation: Like unloading & shifting at site, Cable Aluminium 70x3.5 C 20 meter, control wiring for AMF panel, end termination of cabletesting, commissioning withdiesel. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
