|
| 1 | Taking down chowkhats or frames not exceeding 1.50 sq.m with shutters (without taking off shutters from the frames) and making good disturbed portion), complete all as specified anddirected. |
| 2 | Taking down chowkhats or frames exceeding 1.50 sq.m and not exceeding4.0 Sq.m with shutters(without taking off shutters from the frames) and making good disturbed portion), complete all as specified anddirected. |
| 3 | Taking down shutter of any description areanot exceeding 1.00 Sq.meach complete all as specified anddirected. |
| 4 | Taking down shutter of any description area exceeding 1.00 Sq.m, but not exceeding 2.00 sq.m each, complete all as specified anddirected. |
| 5 | Taking down cement or cement lime plaster on brick or stone work etc includingracking out joints, hacking for key, scrubbing down with water etc, complete all as specified anddirected. |
| 6 | Brick work with old size bricks having crushing strength not less than 75Kg/Sqcm, straight or curved on plan exceeding 6 metre mean radiusbuilt in cement mortar (1:6), complete all as specified and directed. |
| 7 | Welding in repair of old/broken steel windows/door shutters exc 2.5cm but not exceeding 5 cm in length and thicknessd of metal exc 6mm but n exc 9mm, , complete all as specified and directed. |
| 8 | Factory made solid PVC moulded door shutter, 28-30mmthick (stiles), with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2mm wood grain printed PVC sheet on back face, supply and fixing in frame at site as per specification, complete all as specified anddirected. |
| 9 | Factory made Solid PVC Door frame of size 50mm x47mm made out of 5mm wood grain printed PVC sheet reinforced with mild steel square tube 19mm, supplying & fixing in opening as per manufacturer specificationand drawing, complete all as specified and directed. |
| 10 | Factory made 35mm thick, 2nd class hard wood (hollock) glazed and skelton door shuttersopen rebated and prepared to receive glass, gauge etc (withoutsash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass or gauge etc., size of members of shutter as specified in clause 8.24 (a) of part-I, fitted to chowkats, complete all as specified and directed. |
| 11 | Factory made 35mm thick, 2nd class hard wood (hollock) glazed and skelton door shuttersopen rebated and prepared to receive glass, gauge etc (with sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass or gauge etc., size of members of shutter as specified in clause 8.24 (a) of part-I, fitted to chowkats, complete all as specified and directed. |
| 12 | 30 mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides, complete all as specified and directed. |
| 13 | Factory made 35mm thick, 2nd class hard wood (hollock) plain, framed, panelledshutters (two panels) with lock rail and panels of 9mm thickBWP commercial plywood or 12mm thickveneered particle board with commercial face veneers on both sides.The size of rail and style as per IS–1003 (Part-I), kiln seasoned and chemically pressure treated and fitted to chowkats, complete all as specified and directed. |
| 14 | 2nd class soft wood Plain solid straight chowkhats of wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete including tarring back of surface in contact with walls, complete all as specified and directed. |
| 15 | 12 mm prelaminated particle board both side decorative, fixed with aluminium beading and rubber neoprene packing to aluminium frame, complete all as specified anddirected. |
| 16 | Framed work such as grills, gratings, etc with end of bars shouldered and/or riveted or forged into spikes for framed guard bars, barred iron doors, ladders framed balusters,walk ways, railings,framework of water tanks and similar work conforming to Fe -290 grade E-165, complete all as specified and directed. |
| 17 | Providingcement concrete (1 : 2 : 4) type B-1 using 20 mm graded crushed stoneaggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, for inserting hold fasts, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified anddirected. |
| 18 | Butt hinges, medium weight, cold rolled, mild steel, 100mm long, complete all as specified and directed. |
| 19 | Butt hinges, medium weight, cold rolled, mild steel, 75mm long, complete all as specified and directed. |
| 20 | Butt hinges, (ISI Marked), aluminium alloy with galvanised mild steel, of size 100mm long, complete all as specified and directed. |
| 21 | Door seal 1.5mm thick stripof mild steelwith hard brush fixed in door bottom as in repairs, complete all as specified and directed. |
| 22 | Small fittings of 2nd class hard wood such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary\" labours; articles not exceeding 200 cu. cm each, complete all as specified anddirected. |
| 23 | Floor door stopper of aluminium alloy of overall length of cover plate 140mmm and tongue, anodised, with hard drawn steel spring, fixed on door , complete all as specified anddirected. |
| 24 | Factory made Steel windows or ventilators side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete, with glazing bars, dovetailed or welded type of \"Z\" Section, complete all as specified and directed. Note:- Rate quoted shall include jointing of gauged and glazed skelton frame internally with flat iron 40x4 mm thick. |
| 25 | Aluminium alloy anodised, sliding door bolt 300mm long(ISI marked) with hasp staple (bolt type) and fixed clips of sheet, cast or extruded section and fixing bolt and sliding bolt of extruded section, complete all as specified anddirected. |
| 26 | Aluminium anodised (ISI marked), barrel tower bolts of extruded section, length of bolt 200mm, complete all as specified anddirected. |
| 27 | Aluminium anodised (ISI marked), barrel tower bolts of extruded section, length of bolt 150mm, complete all as specified anddirected. |
| 28 | Aluminium, alloy handles, cast type, anodised of size 150mm, all as specified and directed. |
| 29 | Aluminium, alloy handles, cast type, anodised of size 125mm, all as specified and directed. |
| 30 | 300mm long, mild steel ordinary rat tail rod pattern door spring including roller and roller plate, complete all as specified anddirected. |
| 31 | Hacking out old broken glass (any thickness size/ quality description) from woodframe including punching or drilling out old glazing pin/spring from frame, complete all as specified anddirected. |
| 32 | Description all as per serial itemNo 31 here-in-before, but from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones, complete all as specified anddirected. |
| 33 | Ordinary glass, pin head type, 3mm thick , glazingwith oil putty/ wooden beads in squares, size exceeding 0.50sqm in each pane, in wooden/ steel windows, complete all as specified and directed. |
| 34 | Ordinary glass, pin head type, 3mm thick , glazingwith oil putty/ wooden beads in squares, sizenot exceeding 0.50sqm in each pane, in wooden/ steel windows, complete all as specified and directed. |
| 35 | Figured glass, pin head type, 3mm thick , glazingwith oil putty/ wooden beads in squares, sizenot exceeding 0.50sqm in each pane, in wooden/ steel windows, complete all as specified and directed. |
| 36 | 4.8 mm thick sheet figured glass, finted or brosted and glazing with oil putty or fixed with bead/glazing pins in squaresof any sizein each pane, complete all as specified and directed. |
| 37 | Galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples, complete all as specified anddirected. |
| 38 | Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminiumalloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass,other parts made of mild steel heavy duty and fixed, complete all specified anddirected. |
| 39 | Door closer cast iron bodyhydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all specified and directed. |
| 40 | Anodised aluminium framefor doors, windows and ventilator with one or more rebates including joining cleat for fixing etc, complete all as specified anddirected. |
| 41 | Anodised aluminium window and ventilator shutters, fixed type without sash bars, aluminium sections weighing of 0.55 kg/m including fixed with alumnium beading, silicon lining and gaskets, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc , complete all as specified anddirected. |
| 42 | Anodised aluminium door shutters, aluminium section weighing 1.10kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, aluminium handles 2 Nos 150mm long in each door, extruded aluminium alloy anodised butt hinges with galvanised mild steel hing pin type B-21, 03 No\"s, 100mm long in each leaf, anodised aluminum snap beading screws etc., complete all as specified and directed. |
| 43 | Taking down aluminium shutter not exc 2sqm each and refixing in same opening after tightening and adjusting including replacing of accessories as required,complete all as specified and directed.NOTE: Replacement of any item shall be measured and paid separately under respective items of this schedule. |
| 44 | Taking down aluminium shutterexc 2sqm each and refixing in same opening after tightening and adjusting including replacing of accessories as required,complete all as specified and directed. NOTE: Replacement of any item shall be measured and paid separately under respective items of this schedule. |
| 45 | Pivot suitable for aluminium shutter including necessary fixing arrangements, complete all as specified and directed. |
| 46 | EPDM gasket of any description, complete all as specified and directed. |
| 47 | Rubber neoprene packing, complete all as specified and directed. |
| 48 | Anodised aluminium snap on beading/tapper clip for fixing the glass or particle board, complete all as specified and directed. |
| 49 | Roller for sliding window,complete all as specified and directed. |
| 50 | Sliding star lock for sliding window,complete all as specified and directed. |
| 51 | Stainless steel,Butt hinges, 150mm long, complete all as specified and directed. |
| 52 | 4-lever mortice lock, vertical type,100mm for aluminium door, fixing in repair,complete all as specified and directed. |
| 53 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets on any description, any thickness, including cover fillets,complete all as specified and directed. |
| 54 | Hollow PVC Wall Lining consisting of 5mm thick prelaminated colour/ printed PVC sheet single side inclusive of solvent cement and fixing at site on and including 5mm thick PVC sheet fillet of width 35mm for wall paneling includingfixing on to wall to making PVC frame of size 60cm x 60cm and including necessary corner ,side and any other types of beading, fixing in repair,complete all as specified and directed. |
| 55 | Prelaminated particle board 19mm thick, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination with all around 6mm thick teak wood beading as in cup board shutters, shelves,palmet boxes, kitchen cabinet etc. fixedto timber frame, complete all as specified anddirected. |
| 56 | Rendering 15mm thick on brick work or concrete surface in cement mortar (1:4), finished even and smooth without using extra cement, complete all as specified and directed. |
| 57 | Preparation of new plastered/unplastered surfaces of walls and applying two coats of Oil bound distemper over a coat of chalk whitening, complete all as specified and directed. |
| 58 | Preparation of new or previously untreated steel surfaces of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc chromate primer,complete all as specified and directed. |
| 59 | Preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer,complete all as specified and directed. |
| 60 | Continuous (piano) hinges, mild steel,bright finish or electrogalvanised,30mm width of flaps (when open) , complete all as specified and directed. |
| 61 | 50mm dia, cupboard knobs brass polished fixed with nut, screw and washerofmild steel, complete all as specified and directed. |
| 62 | Ball catcher with 8mm dia steel ball, and brass body and striking plate including letting in and fixed, fixing in repair, complete all as specified anddirected. |
| 63 | Hasp and staple, safets type, of size 75mm long, aluminium anodised withhinge pin including bolt to hinge plate and fixed with screws, complete all as specified anddirected. |
| 64 | Steel rolling shutters tickness of lath 1.25mm thick with out ball bearing, as specified including top cover, an choring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type, complete all as specified and directed by Engr-In-Chagre. |
| 65 | Taking down metal rolling shutter manually operated not exceding 10 sqm each including refixing in the same position after carrying out the repair inluding welding of any defective parts and oiling and greasing etc. to all moving partstensioning to spring to make proper functioning of the shutter, complete all as specified anddirected.Notes:- (i) Replacement of defective parts shall be paid seperately under separate items of this schedule (BOQ)). (ii) Repaired shutter shall be firmly secured in walls /columns all as directed by Engineer-in-charge. |
| 66 | Description all as per serial itemNo 65 here-in-before,but gear operated of size exceeding 10 sqm but not exceeding 25sqm each,complete all as specified anddirected. |
| 67 | Replacement of bevel gear with crank handle with new bevel gear with crank handleof rolling shutter, complete all as specified anddirected. |
| 68 | Replacement of worn out shaft of gear operated type rolling shutter with new shaft made up ofheavy grade, complete all as specified and directed. |
| 69 | Replacement of old tension spring with new tension spring of size exceeding 300mm and not exceeding 450mm ( size of shutters not exceeding 10sqm), complete all as specified anddirected. |
| 70 | Description all as per serial itemNo 69 here-in-before, but size of tension spring exceeding 450 but not exceeding 600mm ( size of shutter exceeding 10sqm but not exceeding 25sqm) ,complete all as specified anddirected. |
| 71 | Replacement of certain laths with new laths of size 50x1.25mm thick interlocking laths section, complete all as specified and directed. |
| 72 | Replacement ofsteel guide channel with new steel guide channel made up of1.60mm thick black sheetof any depth 65/75mm with suitable holes for embedding in cement mortar (1:3), complete all as specified anddirected. |
| 73 | Replacement of worn gear wheel of standard size with new gear wheel of standard size,complete all as specified and directed. |
| 74 | Replacement of anchoring rod with new anchoring rod made up of mild steel of size 20/25mm dia for rolling shutters not exceeding 5 metre height, complete all as specified and directed. |
| 75 | Taking down hood cover for rolling shutters exceeding 10sqm and not exceeding 25sq.m and refixing in the same position after doing necessary repair i.e. straighting etc., complete all as specified anddirected. |
| 76 | Ball bearing for rolling shutters, complete all as specified and directed. |
| 77 | Safety lever locks mild steel with 4 levers for rolling shutters, complete all as specified and directed. |
| 78 | Note:-An amount of Rs. 55,800.00 on account of credit schdule for Sch \"A\" Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum. |
